Suppression of Co1E1 replication properties by the Inc P-1 plasmid RK2 in hybrid plasmids constructed in vitro.

Hybrid plasmids were constructed in vitro by linking the Inc P-1 broad host range plasmid RK2 to the colicinogenic plasmid ColE1 at their EcoRI endonuclease cleavage sites. These plasmids were found to be immune to colicin E1, non-colicin-producing, and to exhibit all the characteristics of RK2 including self-transmissibility. These joint replicons have a copy number of 5 to 7 per chromosome which is typical of RK2, but not ColE1. Unlike ColE1, the plasmids will not replicate in the presence of chloramphenicol and are maintained in DNA polymerase I mutants of Escherichia coli. In addition, only RK2 incompatibility is expressed, although functional ColE1 can be rescued from the hybrids by EcoRI cleavage. This suppression of ColE1 copy number and incompatibility was found to be a unique effect of plasmid size on ColE1 properties. However, the inhibition of ColE1 or ColE1-like plasmid replication in chloramphenicol-treated cells is a specific effect of RK2 or segments of RK2 (Cri⁺ phenotype). This phenomenon is not a function of plasmid size and requires covalent linkage of RK2 DNA to ColE1. A specific region of RK2 (50.4 to 56.4 × 10³ base-pairs) cloned in the ColE1-like plasmid pBR313 was shown to carry the genetic determinant(s) for expression of the Cri⁺ phenotype.     

The transposon Tn1 as a probe for studying ColE1 structure and function.

Summary Insertion of the transposable genetic element Tn1 into different sites of plasmid ColE1 results in a number of mutant phenotypes. Whereas all plasmids examined were present in normal amount, all showed reduced immunity to killing by colicin E1. Of six insertions isolated after conjugation, five fail to produce colicin, are conjugally proficient (transmissible), and map within a 500 nucleotide region of the genome. The other is conjugally deficient, produces colicin normally and maps close to two others with a similar phenotype isolated after transformation. Of four others isolated after transformation, two have similar properties to the original five transmissible plasmids. The other two are nontransmissible and produce colicin. Non-transmissibility is correlated with reduced relaxation complex. Patterns of protein synthesis in minicels by ColE1 and ColE1:: Tn1 plasmids have been examined: all ColE1 plasmids containing Tn1 show an altered pattern of ColE1 protein synthesis in addition to three presumptive Tn1-specified proteins, one of which is shown to be -lactamase. ColE1:: Tn1 plasmids can be inserted into the conjugative plasmid R64drd11 to form a cointegrate in which ColE1 and Tn1 function can be expressed.     

Characteristics of replication of small colicinogenic plasmids

Specificity of small multicopy colicinogenic plasmids ColA, ColD, ColE2 and ColK replication has been compared with the one of ColE1 plasmid. Copy number for these plasmids per host cell has been estimated under the normal conditions of cellular growth and under the conditions of chloramphenicol-inhibited growth. DNA polymerase I and dnaB protein, an obligatory component for elongation step in replication, have been shown to be necessary for the plasmids replication. Initiation of plasmids replication has been demonstrated to be independent of dnaA and dnaC proteins. Replication of plasmid ColE2, being similar in its main features to replication of other plasmids from this group, has an important distinction. It requires de novo protein synthesis implying that ColE2 replicon may be different from ColA, ColD, ColK, ColE1 replicons. Thus study of the inducible A, D, K, El colicin synthesis coded by the corresponding plasmids has revealed the similarity regulation of genes, determining the synthesis of each of the mentioned colicins.     

Construction and characterization of amplifiable multicopy DNA cloning vehicles derived from the P15A cryptic miniplasmid.

Construction and characterization of a class of multicopy plasmid cloning vehicles containing the replication system of miniplasmid P15A are described. The constructed plasmids have cleavage sites within antibiotic resistance genes for a variety of commonly employed site-specific endonucleases, permitting convenient use of the insertional inactivation procedure for the selection of clones that contain hybrid DNA molecules. Although the constructed plasmids showed DNA sequence homology with the ColE1 plasmid within the replication region, were amplifiable by chloramphenicol or spectinomycin, required DNA polymerase I for replication, and shared other replication properties with ColE1, they were nevertheless compatible with ColE1. P15A-derived plasmids were not self-transmissible and were mobilized poorly by Hfr strains; however, mobilization was complemented by the presence of a ColE1 plasmid within the same cell.     

ColE1 plasmid incompatibility: localization and analysis of mutations affecting incompatibility.

Deletion mutants of plasmid ColE1 that involve the replication origin and adjacent regions of the plasmid have been studied to determine the mechanism by which those mutations affect the expression of plasmid incompatibility. It was observed that (i) a region of ColE1 that is involved in the expression of plasmid incompatibility lies between base pairs -185 and -684; (ii) the integrity of at least part of the region of ColE1 DNA between base pairs -185 and -572 is essential for the expression of ColE1 incompatibility; (iii) the expression of incompatibility is independent of the ability of the ColE1 genome to replicate autonomously; (iv) plasmid incompatibility is affected by plasmid copy number; and (v) ColE1 plasmid-mediated DNA replication of the lambda phage-ColE1 chimera lambda imm434 Oam29 Pam3 ColE1 is inhibited by ColE1-incompatible but not by ColE1-compatible plasmids.     

Plasmids for recombination-based screening.

To facilitate recombination-based screening, we constructed the ColE1-based plasmid, pi G4, that confers chloramphenicol resistance, contains a polylinker with multiple unique restriction enzyme recognition sequences, and contains the genetic marker, supF. To facilitate recombination-based screening followed by rapid DNA sequencing, we inserted the selectable marker, supF, into each of 20 high-copy-number (hcn) pUC-derived NoC plasmids that were designed for multiplex DNA sequencing. To facilitate recombination-based screening of common cDNA libraries that often contain ColE1 sequences, we constructed a supF-carrying plasmid whose replication was driven from an R6K replicon that does not share sequence homology with ColE1. Furthermore, we incorporated a useful polylinker and increased the copy number of this plasmid to create the 4.4-kb hcn plasmid, pMAD1. Thus, these plasmids allow: (1) background-free transformation of cells by a supF plasmid carrying an antibiotic-resistance marker; (2) simultaneous performance of the recombination-based assay and DNA sequencing; and (3) screening bacteriophage cDNA libraries that contain ColE1 sequences by recombination with a supF plasmid that is not homologous to ColE1 derivatives.     

Lateral transfer of rfb genes: a mobilizable ColE1-type plasmid carries the rfbO:54 (O:54 antigen biosynthesis) gene cluster from Salmonella enterica serovar Borreze.

Plasmid pWQ799 is a 6.9-kb plasmid isolated from Salmonella enterica serovar Borreze. Our previous studies have shown that the plasmid contains a functional biosynthetic gene cluster for the expression of the O:54 lipopolysaccharide O-antigen of this serovar. The minimal replicon functions of pWQ799 have been defined, and a comparison with nucleotide and protein databases revealed this replicon to be virtually identical to ColE1. This is the first report of involvement of ColE1-related plasmids in O-antigen expression. The replicon of pWQ799 is predicted to encode two RNA molecules, typical of other ColE1-type plasmids. RNAII, the putative replication primer from pWQ799, shares regions of homology with RNAII from ColE1. RNA1 is an antisense regulator of DNA replication in ColE1-related plasmids. The coding region for RNAI from pWQ799 shares no homology with any other known RNAI sequence but is predicted to adopt a secondary structure characteristic of RNAI molecules. pWQ799 may therefore represent a new incompatibility group within this family. pWQ799 also possesses cer, rom, and mob determinants, and these differ minimally from those of ColE1. The plasmid is mobilizable in the presence of either the broad-host-range helper plasmid pRK2013 or the IncI1 plasmid R64drd86. Mobilization and transfer of pWQ799 to other organisms provides the first defined mechanism for lateral transfer of O-antigen biosynthesis genes in S. enterica and explains both the distribution of related plasmids and coexpression of the O:54 factor with other O-factors in different Salmonella serovars. The base composition of the pWQ799 replicon sequences gives an average percent G+C value typical of Salmonella spp. In contrast, the percent G+C value is dramatically lower with rfb0:54, consistent with the possibility that the cluster was acquired from an organism with much lower G+C composition.     

Suppression of ColE1 high-copy-number mutants by mutations in the polA gene of Escherichia coli.

We isolated three Escherichia coli suppressor strains that reduce the copy number of a mutant ColE1 high-copy-number plasmid. These mutations lower the copy number of the mutant plasmid in vivo up to 15-fold; the wild-type plasmid copy number is reduced by two- to threefold. The suppressor strains do not affect the copy numbers of non-ColE1-type plasmids tested, suggesting that their effects are specific for ColE1-type plasmids. Two of the suppressor strains show ColE1 allele-specific suppression; i.e., certain plasmid copy number mutations are suppressed more efficiently than others, suggesting specificity in the interaction between the suppressor gene product and plasmid replication component(s). All of the mutations were genetically mapped to the chromosomal polA gene, which encodes DNA polymerase I. The suppressor mutational changes were identified by DNA sequencing and found to alter single nucleotides in the region encoding the Klenow fragment of DNA polymerase I. Two mutations map in the DNA-binding cleft of the polymerase region and are suggested to affect specific interactions of the enzyme with the replication primer RNA encoded by the plasmid. The third suppressor alters a residue in the 3'-5' exonuclease domain of the enzyme. Implications for the interaction of DNA polymerase I with the ColE1 primer RNA are discussed.     

Nature of the compatible inheritance of hybrid plasmid pAS8 and its deletion mutants with replicon ColE1]

Hybrid plasmid pAS8, that consists of RP4 and ColE1 replicons, is incompatible with RP4 but co-exists with ColE1 replicon. The deletion mutants of pAS8, that replicates under the control of ColE1 replicon only, are incompatible with ColE1 derivatives, although the copy number of pAS8 and its deletion mutants in the cell is the same (1-3 per the chromosome). Incompatibility effect of plasmids is expressed in a sharp decrease in transformant's yield during selection of incoming and resident plasmids markers. In this case incompatibility is a very fast process, that leads to the elimination of resident or incoming plasmid just before plating on the selective medium. On the base of negative control theory, the repressors yield, synthesized in the presence of 1-3 copies of the deletion mutant is enough for the expression of ColE1-specific incompatibility. This ColE1 incompatibility is probably connected with the functional activity of ColE1 replicon. When ColE1 factor replicates under the control of RP4 replicon the expression of ColE1-specific incompatibility does not occur. Possibly, the incompatibility effect takes place when pAS8 deletion mutants cause the synthesis of ColE1-specific repressor. Also, the replicons of ColE1 may competein the membrane attachment site.     

Incompatibility and transforming efficiency of ColE1 and related plasmids

Summary Replicons derived from the ColE1 plasmid are incompatible with one another, but are compatible with their naturally occurring relatives ColK and CloDF13. The incompatibility results in loss, by segregation, of one or the other ColE1 plasmid. In most cases, the smaller derivatives tend to displace the larger ones, and the rate of displacement depends on the difference in size. One mini-plasmid retains only 19% of the sequences of ColE1, yet it exrrts strong incompatibility: other ColE1 plasmids are rapidly lost when it is introduced into the host. The region essential for ColE1 incompatibility is deduced to lie within 700 base pairs of the origin of replication.The transforming efficiency of any ColE1 plasmid is markedly lowered when another incompatible replicon is resident in the competent cells, even when the transforming plasmid is much smaller than the resident.A model of incompatibility is proposed to account for these effects.     

Localization of the naturally occurring plasmid ColE1 at the cell pole

The naturally occurring plasmid ColE1 was found to localize as a cluster in one or both of the cell poles of Escherichia coli. In addition to the polar localization of ColE1 in most cells, movement of the plasmid to the midcell position was observed in time-lapse studies. ColE1 could be displaced from its polar location by the p15A replicon, pBAD33, but not by plasmid RK2. The displacement of ColE1 by pBAD33 resulted in an almost random positioning of ColE1 foci in the cell and also in a loss of segregational stability, as evidenced by the large number of cells carrying pBAD33 with no visible ColE1 focus and as confirmed by ColE1 stability studies. The addition of the active partitioning systems of the F plasmid (sopABC) or RK2 (O(B1) incC korB) resulted in movement of the ColE1 replicon from the cell pole to within the nucleoid region. This repositioning did not result in destabilization but did result in an increase in the number of plasmid foci, most likely due to partial declustering. These results are consistent with the importance of par regions to the localization of plasmids to specific regions of the cell and demonstrate both localization and dynamic movement for a naturally occurring plasmid that does not encode a replication initiation protein or a partitioning system that is required for plasmid stability.     

Three small,cryptic plasmids from Aeromonas salmonicida subsp. salmonicida A449

The nucleotide sequences of three small (5.2-5.6 kb) plasmids from Aeromonas salmonicida subsp. salmonicida A449 are described. Two of the plasmids (pAsa1 and pAsa3) use a ColE2-type replication mechanism while the third (pAsa2) is a ColE1-type replicon. Insertions in the Rep protein and oriV region of the ColE2-type plasmids provide subtle differences that allow them to be maintained compatibly. All three plasmids carry genes for mobilization (mobABCD), but transfer genes are absent and are presumably provided in trans. Two of the plasmids, pAsa1 and pAsa3, carry toxin-antitoxin gene pairs, most probably to ensure plasmid stability. One open reading frame (ORF), orf1, is conserved in all three plasmids, while other ORFs are plasmid-specific. A survey of A. salmonicida strains indicates that pAsa1 and pAsa2 are present in all 12 strains investigated, while pAsa3 is present in 11 and a fourth plasmid, pAsal1, is present in 7.     

Stability of ColE1-like and pBR322-like plasmids in Escherichia coli

The average copy number, the level of ampicillin resistance conferred by one plasmid, and the degree of plasmid multimerization were determined for several ColE1-like and pBR322-like plasmids. From the results obtained, the variance of the units of partition corresponding to each plasmid studied was calculated. Experimentally determined plasmid stability was compared with that calculated using the variance of the units of partition and the ratio between the generation times of plasmid-free and of plasmid-carrying cells, assuming that the units of partition are distributed randomly between daughter cells. Stability of the pBR322-like plasmids present mainly as monomers in the bacterial host was consistent with random partitioning, whereas pBR322-like plasmids, present mainly as dimers, and the ColE1-like plasmid showed greater stability than that predicted with random partitioning at cell division.     

Temperature-Sensitive Mutants for the Replication of Plasmids in ESCHERICHIA COLI I. Isolation and Specificity of Host and Plasmid Mutations

Temperature-sensitive mutants of Escherichia coli defective in the replication of the plasmid colicinogenic factor E1 (ColE(1)) were isolated following mutagenesis of E. coli K12 strain carrying the ColE(1) factor. Following the mutagenic treatment an enrichment procedure utilizing the replacement of thymine with bromouracil in the ColE(1) DNA duplicated at the restrictive temperature was used. The mutants isolated following this enrichment step were the result of a mutation event either in the host chromosome or in the ColE(1) plasmid. The host mutants fell into three phenotypic classes based on the effect each mutation had on the maintenance of a variety of other extrachromosomal DNA elements. Phenotypic class I mutations affected all E. coli plasmids, both the I and F sex factor types as well as the ColE(1) factor. Phenotypic class II mutations affected the maintenance of the ColE(1) and the F sex factor type plasmids and not the I type, while phenotypic class III mutations affected only ColE(1) replication. None of these mutations was found to have a significant effect on the replication of the E. coli chromosome. The plasmid-linked mutations fell into two phenotypic classes on the basis of the ability of the Flac episome to complement the mutation in the ColE(1) plasmid.     

Analysis of the complete nucleotide sequence of an Actinobacillus pleuropneumoniae streptomycin-sulfonamide resistance plasmid, pMS260

pMS260 is an 8.1-kb non-conjugative but mobilizable plasmid that was isolated from Actinobacillus pleuropneumoniae and encodes streptomycin (SM) and sulfonamide (SA) resistances. The analysis of the complete nucleotide sequence of the plasmid revealed a high degree of similarity between pMS260 and the broad-host-range IncQ family plasmids. pMS260 had a single copy of an origin of vegetative replication (oriV). This sequence was identical to a functional oriV of the IncQ-like plasmid pIE1130 that had been exogenously isolated from piggery manure. However, pMS260 did not carry the second IncQ plasmid RSF1010-like oriV region present in pIE1130. A pIE1130-identical transfer origin was also found in pMS260. In addition, the deduced amino acid sequences from 10 open reading frames identified in pMS260 were entirely or nearly identical to those from genes for the replication, mobilization, and SM-SA resistance of pIE1130, indicating that pMS260 belongs to the IncQ-1 gamma subgroup. pMS260 is physically indistinguishable from pIE1130 apart from two DNA regions that contain the chloramphenicol and kanamycin resistance genes (catIII and aphI, respectively) and the second oriV-like region of pIE1130. The codon bias analysis of each gene of pIE1130 and the presence of potential recombination sites in the sulII-strA intergenic regions suggest that pIE1130 seems to have acquired the catIII and aphI genes more recently than the other genes of pIE1130. Therefore, pMS260 may be the ancestor of pIE1130. Information regarding the broad-host-range replicon of pMS260 will be useful in the development of genetic systems for a wide range of bacteria including A. pleuropneumoniae.     

Incompatibility between E colicin plasmids

We have tested the ability of pairs of colicin E plasmids to replicate stably in the same cell line. Although many of the pairs of E colicin plasmids were compatible, plasmids ColE3-CA38, ColE7-K317 and ColE8-J were mutually incompatible, as were ColE5-099, ColE6-CT14 and ColE9-J. Incompatibility between ColE6-CT14 and ColE5-099 or ColE9-J was asymmetrical, whereas incompatibility between the other plasmid pairs was symmetrical.     

A facile and reversible method to decrease the copy number of the ColE1-related cloning vectors commonly used in Escherichia coli.

We report a technique which uses the cointegrate intermediate of transposon Tn1000 transposition as a means to lower the copy number of ColE1-type plasmids. The transposition of Tn1000 from one replicon to another is considered a two-step process. In the first step, the transposon-encoded TnpA protein mediates fusion of the two replicons to produce a cointegrate. In the second step, the cointegrate is resolved by site-specific recombination between the two transposon copies to yield the final transposition products: the target replicon with an integrated transposon plus the regenerated donor replicon. Using in vitro techniques, the DNA sequence of the Tn1000 transposon was altered so that cointegrate formation occurs but resolution by the site-specific recombination pathway is blocked. When this transposon was resident on an F factor-derived plasmid, a cointegrate was formed between a multicopy ColE1-type target plasmid and the conjugative F plasmid. Conjugational transfer of this cointegrate into a polA strain resulted in a stable cointegrate in which replication from the ColE1 plasmid origin was inhibited and replication proceeded only from the single-copy F factor replication origin. We assayed isogenic strains which harbored plasmids encoding chloramphenicol acetyltransferase to measure the copy number of such F factor-ColE1-type cointegrate plasmids and found that the copy number was decreased to the level of single-copy chromosomal elements. This method was used to study the effect of copy number on the expression of the fabA gene (which encodes the key fatty acid-biosynthetic enzyme beta-hydroxydecanoylthioester dehydrase) by the regulatory protein encoded by the fadR gene.     

Identification of multicopy suppressors of the pcnB plasmid copy number defect in Escherichia coli

Plasmids containing a ColE1 origin of replication are widely used for cloning purposes in Escherichia coli. Among the host factors that affect the copy number of ColE1 plasmids is the E. coli protein poly(A) polymerase I (PAP I), which regulates the intracellular level of RNA I, a ColE1-encoded negative regulator of plasmid replication. In strains that lack PAP I, RNA I levels are elevated, resulting in reduced levels of ColE1 plasmids in the cell. PAP I is encoded by the gene pcnB. We devised a genetic approach, based on the identification of multicopy suppressor clones, to identify trans-acting factors that can help offset the ColE1 plasmid copy number defect in a pcnB (-) genetic background. Using this strategy, we identified suppressors that mapped to two regions of the E. coli chromosome. The suppressor activity of one of the chromosomal regions was localized to the rssB gene, a response regulator gene known to be involved in the turnover of the stationary-phase sigma factor, RpoS. The second suppressor maps to min 55.4 of the E. coli chromosome, and the factor responsible for the suppressor activity appears to be a novel RNA or protein.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

Re-examination of the ColE1 DNA regions essential for autonomous replication and their functions

Starting from pAO3, a plasmid consisting of a quarter of colicinogenic factor E1 (ColE1) DNA, various small ColE1 derivatives were constructed by in vitro recombination and their ability to achieve autonomous replication was examined. The 436 base pair HaeIII-C fragment of pAO3 contained information for replication when it was recombined with the non-replicating Amp fragment. However, when it was connected to other DNA fragments, the resulting hybrid molecules were not isolated as plasmids. The present results indicate that the additional region of about 240 base pairs next to the HaeIII-C fragment of ColE1 is also essential for the maintenance of a plasmid state. Moreover, using various small ColE1 derivatives, the DNA region responsible for the interference and incompatibility functions of ColE1 DNAs was located. The results indicate that the interference and incompatibility functions are coded by the same ColE1 DNA segment and are not essential for the maintenance of a plasmid state.