The preference for a 3' homologous end is intrinsic to RecA-promoted strand exchange

The recA protein (RecA) promotes DNA pairing and strand exchange optimally in the presence of single-stranded binding protein (SSB). Under these conditions, 3' homologous ends are essential for stable joint molecule formation between linear single-stranded DNA (ssDNA) and supercoiled DNA (i.e. 3' ends are 50-60 times more reactive than 5' ends). Linear ssDNAs with homology at the 5' end do not participate in pairing. In the absence of SSB, the strand exchange reaction is less efficient; however, linear ssDNAs with 3' end homology are still 5- to 10-fold more reactive than those with 5' end homology. The preference for a 3' homologous end in the absence of SSB suggests that this is an intrinsic property of RecA-promoted strand exchange. The preferential reactivity of 3' homologous ends is likely to be a consequence of the polarity of polymerization of RecA on ssDNA. Specifically, since RecA polymerizes in the 5'----3' direction, 3' ends are more likely to be coated with RecA and, hence, will be more reactive than 5' ends.     

Production of triple-stranded recombination intermediates by RecA protein, in vitro

During the directional strand exchange that is promoted by RecA protein between linear duplex DNA and circular single-stranded DNA, a triple-stranded DNA intermediate was formed and persisted even after the completion of strand transfer followed by deproteinization. In the deproteinized three-stranded DNA complexes, the sequestered linear third strand resisted digestion by E coli exonuclease I. In relation to polarity of strand exchange which defines the proximal and distal ends of the duplex DNA, when homology was restricted to the distal region of duplex substrate, the joints formed efficiently and were stable even upon complete deproteinization. Enzymatic probing of deproteinized distal joints with nuclease P1 revealed that the joints consist of long three-stranded structures that at neutral pH lack significant single-stranded character in any of the three strands. Instead of circular single-stranded DNA, when a linear single strand is recombined with partially homologous duplex DNA, in the presence of SSB, the formation of homologous joints by RecA protein, is significantly more efficient at distal end than at the proximal. Taken together, these observations suggest that with any single-stranded DNA (circular or linear), RecA protein efficiently promotes the formation of distal joints, from which, however, authentic strand exchange may not occur. Moreover, these joints might represent an intermediate which is trapped into a stable triple stranded state.     

Effects of various single-stranded-DNA-binding proteins on reactions promoted by RecA protein

To relate the roles of Escherichia coli SSB in recombination in vivo and in vitro, we have studied the mutant proteins SSB-1 and SSB-113, the variant SSBc produced by chymotryptic cleavage, the partially homologous variant F SSB (encoded by the E. coli sex factor), and the protein encoded by gene 32 of bacteriophage T4. All of these, with the exception of SSB-1, augmented both the initial rate of homologous pairing and strand exchange promoted by RecA protein. From these and related observations, we conclude that SSB stimulates the initial formation of joint molecules by nonspecifically promoting the binding of RecA protein to single-stranded DNA; that SSB plays no role in synapsis of the RecA nucleoprotein filament with duplex DNA; that stimulation of strand exchange by SSB is similarly nonspecific; and that all members of the class of proteins represented by SSB, F SSB, and gene 32 protein may play equivalent roles in making single-stranded DNA more accessible to RecA protein.     

Characterization of strand exchange activity of yeast Rad51 protein.

The Saccharomyces cerevisiae RAD51 gene product takes part in genetic recombination and repair of DNA double strand breaks. Rad51, like Escherichia coli RecA, catalyzes strand exchange between homologous circular single-stranded DNA (ssDNA) and linear double-stranded DNA (dsDNA) in the presence of ATP and ssDNA-binding protein. The formation of joint molecules between circular ssDNA and linear dsDNA is initiated at either the 5' or the 3' overhanging end of the complementary strand; joint molecules are formed only if the length of the overhanging end is more than 1 nucleotide. Linear dsDNAs with recessed complementary or blunt ends are not utilized. The polarity of strand exchange depends upon which end is used to initiate the formation of joint molecules. Joint molecules formed via the 5' end are processed by branch migration in the 3'-to-5' direction with respect to ssDNA, and joint molecules formed with a 3' end are processed in the opposite direction.     

Concerted strand exchange and formation of Holliday structures by E. coli RecA protein

RecA protein makes stable joint molecules from fully duplex DNA and molecules that are partially single-stranded; the latter may be either duplex molecules with an internal gap in one strand or molecules with single-stranded ends. Stable joint molecules form only when the end of at least one strand is in a homologous region. When RecA protein pairs linear duplex molecules and tailed molecules that share the same sequence end to end, the joints, which are located away from the single-stranded tails in most instances, have the electron microscopic appearance associated with the Holliday structure resulting from the reciprocal exchange of strands. The reaction leading to reciprocal strand exchange involves the concerted displacement of a strand from the end of the duplex molecule. These observations support the view that RecA protein makes stable joint molecules only by transferring strands and not by the side-by-side pairing of duplex regions.     

The P. furiosus mre11/rad50 complex promotes 5' strand resection at a DNA double-strand break

The Mre11/Rad50 complex has been implicated in the early steps of DNA double-strand break (DSB) repair through homologous recombination in several organisms. However, the enzymatic properties of this complex are incompatible with the generation of 3' single-stranded DNA for recombinase loading and strand exchange. In thermophilic archaea, the Mre11 and Rad50 genes cluster in an operon with genes encoding a helicase, HerA, and a 5' to 3' exonuclease, NurA, suggesting a common function. Here we show that purified Mre11 and Rad50 from Pyrococcus furiosus act cooperatively with HerA and NurA to resect the 5' strand at a DNA end under physiological conditions in vitro. The 3' single-stranded DNA generated by these enzymes can be utilized by the archaeal RecA homolog RadA to catalyze strand exchange. This work elucidates how the conserved Mre11/Rad50 complex promotes DNA end resection in archaea and may serve as a model for DSB processing in eukaryotes.     

The direction of RecA protein assembly onto single strand DNA is the same as the direction of strand assimilation during strand exchange

The RecA protein of Escherichia coli optimally promotes DNA strand exchange reactions in the presence of the single strand DNA-binding protein of E. coli (SSB protein). Under these conditions, assembly of RecA protein onto single-stranded DNA (ssDNA) occurs in three steps. First, the ssDNA is rapidly covered by SSB protein. The binding of RecA protein is then initiated by nucleation of a short tract of RecA protein onto the ssDNA. Finally, cooperative polymerization of additional RecA protein accompanied by displacement of SSB protein results in a ssDNA-RecA protein filament (Griffith, J. D., Harris, L. D., and Register, J. C. (1984) Cold Spring Harbor Symp. Quant. Biol. 49, 553-559). We report here that RecA protein assembly onto circular ssDNA yields RecA protein-covered circles in which greater than 85% are completely covered by RecA protein with no remaining SSB protein-covered segments (as detected by electron microscopy). However, when linear ssDNA is used, 90% of the filaments contain a short segment at one end complexed with SSB protein. This suggests that RecA protein assembly is unidirectional. Visualization of the assembly of RecA protein onto either long ssDNA tails (containing either 5' or 3' termini) or ssDNA gaps generated in double strand DNA allowed us to determine that the RecA protein polymerizes in the 5' to 3' direction on ssDNA and preferentially nucleates at ssDNA-double strand DNA junctions containing 5' termini.     

The RecOR proteins modulate RecA protein function at 5' ends of single-stranded DNA.

The Escherichia coli RecF, RecO and RecR pro teins have previously been implicated in bacterial recombinational DNA repair at DNA gaps. The RecOR-facilitated binding of RecA protein to single-stranded DNA (ssDNA) that is bound by single-stranded DNA-binding protein (SSB) is much faster if the ssDNA is linear, suggesting that a DNA end (rather than a gap) facilitates binding. In addition, the RecOR complex facilitates RecA protein-mediated D-loop formation at the 5' ends of linear ssDNAs. RecR protein remains associated with the RecA filament and its continued presence is required to prevent filament disassembly. RecF protein competes with RecO protein for RecR protein association and its addition destabilizes RecAOR filaments. An enhanced function of the RecO and RecR proteins can thus be seen in vitro at the 5' ends of linear ssDNA that is not as evident in DNA gaps. This function is countered by the RecF/RecO competition for association with the RecR protein.     

RecA protein-promoted homologous pairing and strand exchange between intact and partially single-stranded duplex DNA.

In the pairing reaction between circular gapped and fully duplex DNA, RecA protein first polymerizes on the gapped DNA to form a nucleoprotein filament. Conditions that removed the formation of secondary structure in the gapped DNA, such as addition of Escherichia coli single-stranded DNA binding protein or preincubation in 1 mM-MgCl2, optimized the binding of RecA protein and increased the formation of joint molecules. The gapped duplex formed stable joints with fully duplex DNA that had a 5' or 3' terminus complementary to the single-stranded region of the gapped molecule. However, the joints formed had distinct properties and structures depending on whether the complementary terminus was at the 5' or 3' end. Pairing between gapped DNA and fully duplex linear DNA with a 3' complementary terminus resulted in strand displacement, symmetric strand exchange and formation of complete strand exchange products. By contrast, pairing between gapped and fully duplex DNA with a 5' complementary terminus produced a joint that was restricted to the gapped region; there was no strand displacement or symmetric strand exchange. The joint formed in the latter reaction was likely a three-stranded intermediate rather than a heteroduplex with the classical Watson-Crick structure. We conclude that, as in the three-strand reaction, the process of strand exchange in the four-strand reaction is polar and progresses in a 5' to 3' direction with respect to the initiating strand. The present study provides further evidence that in both three-strand and four-strand systems the pairing and strand exchange reactions share a common mechanism.     

Electron microscopic visualization of the RecA protein-mediated pairing and branch migration phases of DNA strand exchange

The RecA protein of Escherichia coli will drive the pairing and exchange of strands between homologous DNA molecules in a reaction stimulated by single-stranded binding protein. Here, reactions utilizing three homologous DNA pairs which can undergo both paranemic and plectonemic joining were examined by electron microscopy: supertwisted double-stranded (ds) DNA and linear single-stranded (ss) DNA, linear dsDNA and circular ssDNA, and linear dsDNA and colinear ssDNA. Several major observations were: (i) with RecA protein bound to the DNA, plectonemic joints were ultrastructurally indistinguishable from paranemic joints; (ii) complexes which appeared to be joined both paranemically and plectonemically were present in these reactions in roughly equal numbers; and (iii) in complexes undergoing strand exchange, both DNA partners were often enveloped within a RecA protein filament consisting of hundreds of RecA protein monomers and several kilobases of DNA. These observations suggest that, following RecA protein-ssDNA filament formation, strand exchange proceeds by a pathway that can be divided structurally into three phases: pairing, envelopment/exchange, and release of the products.     

The efficiency of strand invasion by Escherichia coli RecA is dependent upon the length and polarity of ssDNA tails

RecA protein is essential for homologous recombination and the repair of DNA double-strand breaks in Escherichia coli. The protein binds DNA to form nucleoprotein filaments that promote joint molecule formation and strand exchange in vitro. RecA polymerises on ssDNA in the 5'-3' direction and catalyses strand exchange and branch migration with a 5'-3' polarity. It has been reported previously, using D-loop assays, in which ssDNA (containing a heterologous block at one end) invades supercoiled duplex DNA that 3'-homologous ends are reactive, whereas 5'-ends are inactive. This polarity bias was thought to be due to the polarity of RecA filament formation, which results in the 3'-ends being coated in RecA, whereas 5'-ends remain naked. Using a range of duplex substrates containing ssDNA tails of various lengths and polarities, we now demonstrate that when no heterologous block is imposed, 5'-ends are just as reactive as 3'-ends. Moreover, using short-tailed substrates, we find that 5'-ends form more stable D-loops than 3'-ends. This bias may be a consequence of the instability of short 3'-joints. With more physiological substrates containing long ssDNA tails, we find that RecA shows no intrinsic preference for 5' or 3'-ends and that both form D-loop complexes with high efficiency.     

Double-strand break repair: are Rad51/RecA--DNA joints barriers to DNA replication?

The central step of homologous recombination is the DNA strand exchange reaction catalyzed by bacterial RecA or eukaryotic Rad51. Besides Rad51-mediated synthesis-dependent strand annealing (SDSA), DNA ends can promote replication in Escherichia coli (recombination-dependent replication, RDR) and yeast (break-induced replication, BIR). However, what causes a DNA end to be repaired via SDSA or via BIR/RDR? I propose that Rad51/RecA--DNA plectonemic joints act as barriers to DNA replication and that BIR/RDR is only possible when the DNA polymerase that synthesizes DNA from the invading 3' end does not encounter RecA/Rad51--DNA joints in its path.     

Heteroduplex formation by human Rad51 protein: effects of DNA end-structure, hRP-A and hRad52.

Purified human Rad51 protein (hRad51) catalyses ATP-dependent homologous pairing and strand transfer reactions, characteristic of a central role in homologous recombination and double-strand break repair. Using single-stranded circular and partially homologous linear duplex DNA, we found that the length of heteroduplex DNA formed by hRad51 was limited to approximately 1.3 kb, significantly less than that observed with Escherichia coli RecA and Saccharomyces cerevisiae Rad51 protein. Joint molecule formation required the presence of a 3' or 5'-overhang on the duplex DNA substrate and initiated preferentially at the 5'-end of the complementaryx strand. These results are consistent with a preference for strand transfer in the 3'-5' direction relative to the single-stranded DNA. The human single-strand DNA-binding protein, hRP-A, stimulated hRad51-mediated joint molecule formation by removing secondary structures from single-stranded DNA, a role similar to that played by E. coli single-strand DNA-binding protein in RecA-mediated strand exchange reactions. Indeed, E. coli single-strand DNA-binding protein could substitute for hRP-A in hRad51-mediated reactions. Joint molecule formation by hRad51 was stimulated or inhibited by hRad52, dependent upon the reaction conditions. The inhibitory effect could be overcome by the presence of hRP-A or excess heterologous DNA.     

Visualization of recA protein and its association with DNA: a priming effect of single-strand-binding protein

A stoichiometric interaction of RecA protein with single-stranded DNA promotes homologous pairing of the single strand with duplex DNA and subsequent polar formation of a heteroduplex joint. Escherichia coli single-strand-binding (SSB) protein augments these reactions. Electron microscopic observations suggest structural bases for these interactions. Without triphosphates or DNA, RecA protein forms short linear filaments. With added circular single-stranded DNA, it forms extended circular filaments as well as collapsed and aggregated complexes of protein and DNA. The extended circular filaments are stiff and regular in appearance, contrasting with the convoluted structure formed by SSB protein and single-stranded DNA. Together, these two proteins form mixed filaments, which mostly resemble the extended structures containing RecA protein; moreover, SSB protein accelerates formation of extended filaments more than 50-fold, increasing the yield of these structures at the expense of heterogeneous aggregates. Other observations further define the interactions of RecA protein with partially single-stranded DNA, and the effects of ATP gamma S on the tendency of RecA protein to form polymeric structures even in the absence of DNA.     

RecA protein filaments disassemble in the 5' to 3' direction on single-stranded DNA

RecA protein forms filaments on both single- and double-stranded DNA. Several studies confirm that filament extension occurs in the 5' to 3' direction on single-stranded DNA. These filaments also disassemble in an end-dependent fashion, and several indirect observations suggest that the disassembly occurs on the end opposite to that at which assembly occurs. By labeling the 5' end of single-stranded DNA with a segment of duplex DNA, we demonstrate unambiguously that RecA filaments disassemble uniquely in the 5' to 3' direction.     

ATP hydrolysis and the displaced strand are two factors that determine the polarity of RecA-promoted DNA strand exchange.

When the recA protein (RecA) of Escherichia coli promotes strand exchange between single-stranded DNA (ssDNA) circles and linear double-stranded DNAs (dsDNA) with complementary 5' or 3' ends a polarity is observed. This property of RecA depends on ATP hydrolysis and the ssDNA that is displaced in the reaction since no polarity is observed in the presence of the non-hydrolyzable ATP analog, ATP gamma S, or in the presence of single-strand specific exonucleases. Based on these results a model is presented in which both the 5' and 3' complementary ends of the linear dsDNA initiate pairing with the ssDNA circle but only one end remains stably paired. According to this model, the association/dissociation of RecA in the 5' to 3' direction on the displaced strand determines the polarity of strand exchange by favoring or blocking its reinvasion into the newly formed dsDNA. Reinvasion is favored when the displaced strand is coated with RecA whereas it is blocked when it lacks RecA, remains covered by single-stranded DNA binding protein or is removed by a single-strand specific exonuclease. The requirement for ATP hydrolysis is explained if the binding of RecA to the displaced strand occurs via the dissociation and/or transfer of RecA, two functions that depend on ATP hydrolysis. The energy for strand exchange derives from the higher binding constant of RecA for the newly formed dsDNA as compared with that for ssDNA and not from ATP hydrolysis.     

Homologous pairing in vitro stimulated by the recombination hotspot, Chi.

Genetic recombination in Escherichia coli is stimulated at DNA sequences known as Chi sites, 5'-GCT-GGTGG-3'. We describe the in vitro formation of homologously paired joint molecules that is dependent upon this recombination hotspot. Chi-dependent joint molecule formation requires RecA, RecBCD, and SSB proteins and a Chi site in the donor linear dsDNA. The donor dsDNA is unwound by RecBCD enzyme, and the invasive strand is generated by nicking at Chi. This Chi-dependent invading strand must contain homology to the recipient supercoiled DNA substrate at its newly formed 3' end for efficient joint molecule formation. Action at Chi generates invasive ssDNA from the 5' but not the 3' side of Chi, suggesting that the nuclease activity of RecBCD enzyme is attenuated upon encountering a Chi site. These results support the view that RecBCD enzyme action can precede RecA protein action and reconcile the seemingly opposing degradative and recombination functions of RecBCD enzyme.     

Three-strand exchange by the Escherichia coli RecA protein using ITP as a nucleotide cofactor: mechanistic parallels with the ATP-dependent reaction of the RecA protein from Streptococcus pneumoniae

The RecA protein from Escherichia coli promotes an ATP-dependent three-strand exchange reaction between a circular single-stranded DNA (ssDNA) and a homologous linear double-stranded (dsDNA). We have now found that under certain conditions, the RecA protein is also able to promote the three-strand exchange reaction using the structurally related nucleoside triphosphate, ITP, as the nucleotide cofactor. However, although both reactions are stimulated by single-stranded DNA-binding (SSB) protein, the ITP-dependent reaction differs from the ATP-dependent reaction in that it is observed only at low SSB protein concentrations, whereas the ATP-dependent reaction proceeds efficiently even at high SSB protein concentrations. Moreover, the circular ssDNA-dependent ITP hydrolysis activity of the RecA protein is strongly inhibited by SSB protein (suggesting that SSB protein displaces RecA protein from ssDNA when ITP is present), whereas the ATP hydrolysis activity is uninhibited even at high SSB protein concentrations (because RecA protein is resistant to displacement by SSB protein when ATP is present). These results suggest that SSB protein does not stimulate the ITP-dependent strand exchange reaction presynaptically (by facilitating the binding of RecA protein to the circular ssDNA substrate) but may act postsynaptically (by binding to the displaced strand that is generated when the circular ssDNA invades the linear dsDNA substrate). Interestingly, the mechanistic characteristics of the ITP-dependent strand exchange reaction of the E. coli RecA protein are similar to those of the ATP-dependent strand exchange reaction of the RecA protein from Streptococcus pneumoniae. These findings are discussed in terms of the relationship between the dynamic state of the RecA-ssDNA filament and the mechanism of the SSB protein-stimulated three-strand exchange reaction.     

Bacillus subtilis RecU Holliday-junction resolvase modulates RecA activities

The Bacillus subtilis RecU protein is able to catalyze in vitro DNA strand annealing and Holliday-junction resolution. The interaction between the RecA and RecU proteins, in the presence or absence of a single-stranded binding (SSB) protein, was studied. Substoichiometric amounts of RecU enhanced RecA loading onto single-stranded DNA (ssDNA) and stimulated RecA-catalyzed D-loop formation. However, RecU inhibited the RecA-mediated three-strand exchange reaction and ssDNA-dependent dATP or rATP hydrolysis. The addition of an SSB protein did not reverse the negative effect exerted by RecU on RecA function. Annealing of circular ssDNA and homologous linear 3′-tailed double-stranded DNA by RecU was not affected by the addition of RecA both in the presence and in the absence of SSB. We propose that RecU modulates RecA activities by promoting RecA-catalyzed strand invasion and inhibiting RecA-mediated branch migration, by preventing RecA filament disassembly, and suggest a potential mechanism for the control of resolvasome assembly.     

recA protein promoted DNA strand exchange

recA protein and circular single-stranded DNA form a stable complex in the presence of single-stranded DNA binding protein (SSB), in which one recA protein monomer is bound per two nucleotides of DNA. These complexes are kinetically significant intermediates in the exchange of strands between the single-stranded DNA and an homologous linear duplex. After completion of strand exchange, the recA protein remains tightly associated with the circular duplex product of the reaction and the SSB is bound to the displaced linear single strand. Upon addition of ADP, the recA protein-duplex DNA complex dissociates. RecA protein also interacts with single-stranded DNA in the absence of SSB; however, the amount of recA protein bound is substantially reduced. These findings provide direct physical evidence for the participation of SSB in the formation of the recA protein-single-stranded DNA complexes inferred earlier from kinetic analysis. Moreover, they confirm the ability of recA protein to equilibrate between bound and free forms in the absence of SSB.