Analysis of proton chemical shifts in regular secondary structure of proteins

Summary The contribution of peptide groups to H and H proton chemical shifts can be modeled with empirical equations that represent magnetic anisotropy and electrostatic interactions [Ösapay, K. and Case, D.A. (1991) J. Am. Chem. Soc., 113, 9436–9444]. Using these, a model for the random coil reference state can be generated by averaging a dipeptide over energetically allowed regions of torsion-angle space. Such calculations support the notion that the empirical constant used in earlier studies arises from neighboring peptide contributions in the reference state, and suggest that special values be used for glycine and proline residues, which differ significantly from other residues in their allowed ,-ranges. New constants for these residues are reported that provide significant improvements in predicted backbone shifts. To illustrate how secondary structure affects backbone chemical shifts we report calculations on oligopeptide models for helices, sheets and turns. In addition to suggesting a physical mechanism for the widely recognized average difference between and secondary structures, these models suggest several additional regularities that should be expected: (a) H protons at the edges of -sheets will have a two-residue periodicity; (b) the H² and H³ protons of glycine residues will exhibit different shifts, particularly in sheets; (c) H protons will also be sensitive to local secondary structure, but in different directions and to a smaller extent than H protons; (d) H protons in turns will generally be shifted upfield, except those in position 3 of type I turns. Examples of observed shift patterns in several proteins illustrate the application of these ideas.     

Covalent cross-linking of proteins without chemical reagents

A facile method for the formation of zero-length covalent cross-links between protein molecules in the lyophilized state without the use of chemical reagents has been developed. The cross-linking process is performed by simply sealing lyophilized protein under vacuum in a glass vessel and heating at 85 degrees C for 24 h. Under these conditions, approximately one-third of the total protein present becomes cross-linked, and dimer is the major product. Chemical and mass spectroscopic evidence obtained shows that zero-length cross-links are formed as a result of the condensation of interacting ammonium and carboxylate groups to form amide bonds between adjacent molecules. For the protein examined in the most detail, RNase A, the cross-linked dimer has only one amide cross-link and retains the enzymatic activity of the monomer. The in vacuo cross-linking procedure appears to be general in its applicability because five different proteins tested gave substantial cross-linking, and co-lyophilization of lysozyme and RNase A also gave a heterogeneous covalently cross-linked dimer.     

The relationship between amide proton chemical shifts and secondary structure in proteins

Summary The parameters for HN chemical shift calculations of proteins have been determined using data from high-resolution crystal structures of 15 proteins. Employing these chemical shift calculations for HN protons, the observed secondary structure chemical shift trends of HN protons, i.e., upfield shifts on helix formation and downfield shifts on -sheet formation, are discussed. Our calculations suggest that the main reason for the difference in NH chemical shifts in helices and sheets is not an effect from the directly hydrogen-bonded carbonyl, which gives rise to downfield shifts in both cases, but arises from an additional upfield shift predicted in helices and originating in residues i-2 and i-3. The calculations also explain the well-known relationship between amide proton shifts and hydrogen-bond lengths. In addition, the HN chemical shifts of the distorted amphipathic helices of the GCN4 leucine zipper are calculated and used to characterise the solution structure of the helices. By comparing the calculated and experimental shifts, it is shown that in general the agreement is good between residues 15 and 28. The most interesting observation is that in the N-terminal half of the zipper, although both calculated and experimental shifts show clear periodicity, they are no longer in phase. This suggests that for the N-terminal half, in the true average solution structure the period of the helix coil is longer by roughly one residue compared to the NMR structures.     

Correlation between 15N NMR chemical shifts in proteins and secondary structure

Summary An empirical correlation between the peptide ¹⁵N chemical shift, ¹⁵N_i, and the backbone torsion angles _i, _i–1 is reported. By using two-dimensional shielding surfaces (_i1–1), it is possible in many cases to make reasonably accurate predictions of ¹⁵N chemical shifts for a given structure. On average, the rms error between experiment and prediction is about 3.5 ppm. Results for threonine, valine and isoleucine are worse (4.8 ppm), due presumably to ₁-distribution/-gauche effects. The rms errors for the other amino acids are 3 ppm, for a typical maximal chemical shift range of 15–20 ppm. Thus, there is a significant correlation between ¹⁵N chemical shift and secondary structure.     

Interactions between CusF and CusB identified by NMR spectroscopy and chemical cross-linking coupled to mass spectrometry

The Escherichia coli periplasmic proteins CusF and CusB, as part of the CusCFBA efflux system, aid in the resistance of elevated levels of copper and silver by direct metal transfer between the metallochaperone CusF and the membrane fusion protein CusB before metal extrusion from the periplasm to the extracellular space. Although previous in vitro experiments have demonstrated highly specific interactions between CusF and CusB that are crucial for metal transfer to occur, the structural details of the interaction have not been determined. Here, the interactions between CusF and CusB are mapped through nuclear magnetic resonance (NMR) spectroscopy and chemical cross-linking coupled with high-resolution mass spectrometry to better understand how recognition and metal transfer occur between these proteins. The NMR (1)H-(15)N correlation spectra reveal that CusB interacts with the metal-binding face of CusF. In vitro chemical cross-linking with a 7.7 ? homobifunctional amine-reactive cross-linker, BS(2)G, was used to capture the CusF/CusB interaction site, and mass spectral data acquired on an LTQ-Orbitrap confirm the following two cross-links: CusF K31 to CusB K29 and CusF K58 to CusB K32, thus revealing that the N-terminal region of CusB interacts with the metal-binding face of CusF. The proteins transiently interact in a metal-dependent fashion, and contacts between CusF and CusB are localized to regions near their respective metal-binding sites.     

Lateral organization of proteins in the chromatophore membrane ofRhodospirillum rubrum studied by chemical cross-linking

The organization of proteins in the chromatophore membrane, particularly of the reaction center and the light-harvesting polypeptide, was examined by the use of a hydrophobic and a hydrophilic cross-linking reagent, namely DSP (dithiobis-succinimidyl propionate) and glutaraldehyde. The linkage of proteins was studied by SDS polyacrylamide pore gradient electrophoresis. DSP was shown to link proteins within the core of the membrane. The subunit H of the reaction center is linked with DSP at a low concentration, either with itself or with other membrane proteins but not to the subunits M and L. In isolated reaction centers the subunits H are exclusively linked with each other. With increasing concentrations of DSP the bands of the subunits M, L, and the light-harvesting polypeptide disappear simultaneously from the gel, suggesting that these proteins are linked together. This hypothesis is supported by the finding that reaction centers isolated from chromatophores treated with DSP retain an appreciable amount of light-harvesting polypeptide. With increasing concentrations of the hydrophilic cross-linking reagent glutaraldehyde, the bands of all the three subunits of the reaction center, H, M, and L, progressively disappear from the gel, suggesting that they are linked together. The light-harvesting polypeptide remains free when this reagent is used.     

Tubulin interaction with kinetochore proteins: analysis by in vitro assembly and chemical cross-linking

The sera from patients with the CREST (calcinosis, Raynaud's phenomenon, esophageal dysmotility, sclerodactyly, telangiectasia) variation of the autoimmune disease scleroderma contain autoantibodies that specifically recognize the kinetochore by immunofluorescence. Two major antigens of molecular masses 18 and 80 kD are consistently identified by Western blotting of proteins of isolated chromosomes using CREST sera. In this paper, the possible roles that these two proteins play in the interaction of metaphase chromosomes with tubulin and microtubules are examined using two different procedures. In one set of experiments. Chinese hamster ovary (CHO) chromosomes were extracted with 1-2 M NaCl before incubating with phosphocellulose-purified tubulin under in vitro microtubule assembly conditions. After this treatment, the kinetochores of the residual chromosome scaffolds can still initiate the in vitro assembly of microtubules. Immunoblots of the chromosome scaffold proteins demonstrate that the 18-kD protein has been solubilized by the 1-2 M NaCl extraction, suggesting that this protein is not essential for microtubule assembly at the kinetochore. In a second approach, tubulin was covalently cross-linked to kinetochores of CHO chromosomes using the reversible cross-linking reagent dithiobis (succinimidyl propionate). After DNase I digestion, the chromosomes were solubilized and subjected to anti-tubulin affinity chromatography. Tubulin-kinetochore protein complexes were specifically eluted and analyzed by PAGE and immunoblotting with scleroderma CREST serum. Only a small number of proteins were eluted from the antitubulin affinity column as shown by Coomassie Blue-stained gels. In addition to tubulin, an 80-kD polypeptide, bands at 110 and 24 kD, as well as a faint band at 54 kD, can be resolved. Several minor bands can also be seen in silver-stained gels. The 80-kD protein band from whole metaphase chromosomes reacted with scleroderma CREST serum by immunoblotting and therefore probably represents the major centromere antigen CENP-B. This report provides evidence for a specific protein complex on metaphase chromosomes that is contiguous with kinetochore-bound tubulin and may be involved in microtubule-kinetochore interactions during mitosis.     

An evaluation of chemical shift index-based secondary structure determination in proteins: Influence of random coil chemical shifts

Random coil chemical shifts are commonly used to detect protein secondary structural elements in chemical shift index (CSI) calculations. Though this technique is widely used and seems reliable for folded proteins, the choice of reference random coil chemical shift values can significantly alter the outcome of secondary structure estimation. In order to evaluate these effects, we present a comparison of secondary structure content calculated using CSI, based on five different reference random coil chemical shift value sets, to that derived from three-dimensional structures.Our results show that none of the reference random coil data sets chosen for evaluation fully reproduces the actual secondary structures. Among the reference values generally available to date, most tend to be good estimators only of helices. Based on our evaluation, we recommend the experimental values measured by Schwarzinger et al.(2000), and statistical values obtained by Lukin et al. (1997), as good estimators of both helical and sheet content.     

Predicting the redox state and secondary structure of cysteine residues in proteins using NMR chemical shifts

Different programs and methods were employed to superimpose protein structures, using members of four very different protein families as test subjects, and the results of these efforts were compared. Algorithms based on human identification of key amino acid residues on which to base the superpositions were nearly always more successful than programs that used automated techniques to identify key residues. Among those programs automatically identifying key residues, MASS could not superimpose all members of some families, but was very efficient with other families. MODELLER, MultiProt, and STAMP had varying levels of success. A genetic algorithm program written for this project did not improve superpositions when results from neighbor-joining and pseudostar algorithms were used as its starting cases, but it always improved superpositions obained by MODELLER and STAMP. A program entitled PyMSS is presented that includes three superposition algorithms featuring human interaction.     

Actin-fragmin interactions as revealed by chemical cross-linking

A one to one complex of actin and fragmin (a capping protein from Physarum polycephalum plasmodia) was cross-linked with 1-ethyl-3-[3-(dimethylamino)propyl] carbodiimide. The cross-linking reaction generated two cross-linked products with slightly different molecular weights (88 000 and 90 000) as major species. They were cross-linked products of one actin and one fragmin. The cross-linking site of fragmin in the actin sequence was determined by peptide mappings [Sutoh, K. (1982) Biochemistry 21, 3654-3661] after partial chemical cleavages of cross-linked products with hydroxylamine. The results indicated that the N-terminal segment of actin spanning residues 1-12 participated in cross-linking with fragmin. The cross-linker used in this study covalently bridges lysine side chains and side chains of acidic residues when they are in direct contact. Therefore, it seems that acidic residues in the N-terminal segment of actin (Asp-1, Glu-2, Asp-3, Glu-4, and Asp-11), at least some of them, are in the binding site of fragmin. It has already been shown that the same acidic segment of actin is in the binding site of myosin or depactin (an actin-depolymerizing protein isolated from starfish oocytes). We suggest that the unusual amino acid sequence of the N-terminal segment of actin makes its N-terminal region a favorable anchoring site for various types of actin-binding proteins.     

Automatic identification of secondary structure in globular proteins

A computer program is used to analyse automatically and objectively the atomic co-ordinates of a large number of globular proteins in order to identify the regions of α-helix, β-sheet and reverse-turn secondary structure. Several different criteria for the assignment of secondary structure are tested for accuracy, reproducibility and efficiency. The most successful criterion, which is based on patterns of peptide hydrogen bonds, inter-C^α distances and inter-C^α torsion angles, is used to find the secondary structure of all the proteins studied. The accuracy of the derived assignments is assessed by comparing them with the secondary structure reported in the literature for each protein. The reliability of the methods is assessed by comparing the secondary structures derived from the independently determined sets of co-ordinates available for some proteins.We provide the first objective and consistent compilation of α-helix, β-sheet and reverse-turn secondary structure in almost all globular proteins of known tertiary structure. These data will be invaluable for analysing the relative tendencies of different amino acids to occur in different types of secondary structure, for analysing the regularity of the secondary structure itself, and for analysing how the pieces of secondary structure fit together to form the globular tertiary structure of each protein.     

Quaternary structure of the ATPase complex of human 26S proteasomes determined by chemical cross-linking

The 26S proteasome is the major protease responsible for nonlysosomal protein degradation in eukaryotic cells. The enzyme is composed of two subparticles: the 20S proteasome, and a 19S regulatory particle (PA700) which binds to the ends of the 20S proteasome cylinder and accounts for ATP dependence and substrate specificity. Among the approximately 18 subunits of PA700 regulator, six are ATPases. The ATPases presumably recognize, unfold, and translocate substrates into the interior of the 26S proteasome. It is generally believed that the ATPases form a hexameric ring. By means of chemical cross-linking, immunoprecipitation, and blotting, we have determined that the ATPases are organized in the order S6-S6'-S10b-S8-S4-S7. Additionally, we found cross-links between the ATPase S10b and the 20S proteasome subunit alpha6. Together with the previously known interaction between S8 and alpha1 and between S4 and alpha7, these data establish the relative orientations of ATPases with respect to the 20S proteasome.     

Detection of secondary structure elements in proteins by hydrophobic cluster analysis.

Hydrophobic cluster analysis (HCA) is a protein sequence comparison method based on alpha-helical representations of the sequences where the size, shape and orientation of the clusters of hydrophobic residues are primarily compared. The effectiveness of HCA has been suggested to originate from its potential ability to focus on the residues forming the hydrophobic core of globular proteins. We have addressed the robustness of the bidimensional representation used for HCA in its ability to detect the regular secondary structure elements of proteins. Various parameters have been studied such as those governing cluster size and limits, the hydrophobic residues constituting the clusters as well as the potential shift of the cluster positions with respect to the position of the regular secondary structure elements. The following results have been found to support the alpha-helical bidimensional representation used in HCA: (i) there is a positive correlation (clearly above background noise) between the hydrophobic clusters and the regular secondary structure elements in proteins; (ii) the hydrophobic clusters are centred on the regular secondary structure elements; (iii) the pitch of the helical representation which gives the best correspondence is that of an alpha-helix. The correspondence between hydrophobic clusters and regular secondary structure elements suggests a way to implement variable gap penalties during the automatic alignment of protein sequences.