Characterization of chloramphenicol resistance inLactobacillus plantarum caTC2

A strain ofLactobacillus plantarum caTC2R isolated from a meat source was resistant to chloramphenicol (30 g/ml). Resistance was mediated through an inducible chloramphenicol acetyltransferase. Plasmid analysis of this strain showed three plasmids, of which the 8.5-kb plasmid apparently encodes the gene for chloramphenicol resistance. This plasmid was lost at high frequency (25%) when theLactobacillus was subcultured at a higher than optimal temperature (40°C).     

A novel vector for lactic acid bacteria that uses a bile salt hydrolase gene as a potential food-grade selection marker

A novel vector pM4aB for lactic acid bacterial was developed using a bile salt hydrolase gene from Lactobacillus plantarum as a potential food-grade selection marker. The 3.0-kb pM4aB consisted of the replicon of Lactobacillus plasmid pM4, a multiple cloning site and the bsh gene, which was constructed by elimination of a 5.5-kb non-food-grade DNA fragment from an 8.5-kb intermediate vector pBEmpM4aB. For electroporation into Lactobacillus paracasei X9, a high transformation efficiency of 4.0±1.0×10(4) CFU/μg plasmid DNA was yielded with 0.1% (wt/vol) glycodeoxycholic acid sodium selection. A high segregation stability of the vector was also observed as only 0.1% plasmid was lost after 50 generations of growth without selection pressure. The application potential of pM4aB was further confirmed by expression of a catalase gene from Lactobacillus sakei in L. paracasei. These results revealed that the novel vector pM4aB constructed in this study would be a useful tool for genetic modification of the industrially important LAB.     

Production of acidocin B, a bacteriocin of Lactobacillus acidophilus M46 is a plasmid-encoded trait: Plasmid curing, genetic marking by in vivo plasmid integration, and gene transfer

Abstract Plasmid-curing studies suggest that acidocin B production is encoded by the 14-kb plasmid pCV461 in Lactobacillus acidophilus M46. Loss of pCV461 from the original producer strain M46 did not coincide with loss of immunity to acidocin B. Bacteriocin activity determination after SDS-PAGE showed that a substance of 2.4 kDa, absent in the culture supernatant of the mutant strain M46A2, lacking pCV461, represented acidocin B activity. In order to introduce a positive selection criterion, pCV461 was marked in vivo by the erythromycin resistance marker of pE194, present on pUC19 containing a 1.4-kb Hin dIII fragment of pCV461, after plasmid integration. Introduction of this recombinant plasmid into the mutant strain M46A2 or Lactobacillus plantarum resulted in erythromycin-resistant, acidocin B-producing transformants, showing unambiguously that acidocin B is encoded by pCV461.     

Dispersal of a plasmid-borne chloramphenicol resistance gene in streptococcal and enterococcal plasmids

Plasmids coding for chloramphenicol resistance, five isolated from streptococci of groups A, B, and G, ten from enterococci (Enterococcus faecalis, Enterococcus faecium), and two from staphylococci, were tested for sequence homology with the chloramphenicol resistance gene of pIP501, a 30-kb plasmid originally isolated from a group B Streptococcus. The 6.3-kb HindIII fragment of pIP501, known to carry the chloramphenicol resistance gene, was cloned into pBR322. A 1.6-kb portion of the cloned fragment, which included most of the chloramphenicol resistance gene, was used as probe in DNA-DNA hybridization experiments. Sequence homology was detected between the probe and four of the streptococcal, seven of the enterococcal, and one of the staphylococcal plasmids. The absence of hybridization between this probe and one plasmid isolated from a group B Streptococcus, as well as three isolated from E. faecalis, indicated that there are at least two different plasmid-borne chloramphenicol resistance determinants in the streptococci and in the enterococci.     

Nucleotide sequence, structural organization and host range of pRS4, a small cryptic Pediococcus pentosaceus plasmid that contains two cassettes commonly found in other lactic acid bacteria

The complete nucleotide sequence of the cryptic plasmid pRS4 (3550 bp) from Pediococcus pentosaceus RS4 was determined. Sequence analysis revealed the presence of three open reading frames (ORFs). The putative protein coded by ORF 1 showed 93% identity with the mobilization protein of Lactobacillus casei plasmid pLC88 and 94% identity with a sequenced fragment of the mobilization protein of P. damnosus plasmid pF8801, suggesting a common origin for these three mobilization proteins. The putative protein coded by ORF 2 showed 92% identity with the replication protein of L. plantarum plasmid pWCFS101, a plasmid that replicates via the rolling circle (RC) mechanism, suggesting a similar replication mechanism for pRS4. Supporting this hypothesis, a putative double strand origin (dso) and a region with palindromic sequences that could function as single strand origin (sso), were detected in pRS4. A function could not be assigned to ORF 3. Since ORF 1 exhibits high identity with L. casei plasmid pLC88 but lower identity (58%) with other Lactobacillus plasmids, and ORF 2 exhibits high identity with the L. plantarum plasmid pWCFS101 but lower identity (55-58%) with other Lactobacillus plasmids (including pLC88), two independent cassettes, from different sources, seem to be involved in the structure of pRS4. Plasmids derived from pRS4 containing the chloramphenicol resistance gene were successfully electrotransformed in L. plantarum, L. casei, P. pentosaceus, and Pediococcus acidilactici, suggesting that pRS4 could be used as a cloning vector for lactic acid bacteria. To our knowledge pRS4 is the first RC-replicating plasmid of P. pentosaceus that has been completely sequenced and used as cloning vector.     

Tn917 transposition in Lactobacillus plantarum using the highly temperature-sensitive plasmid pTV1Ts as a vector

pTV1Ts, a temperature-sensitive plasmid coding for chloramphenicol (Cm) resistance and carrying the macrolide-lincosamide-steptogramin B (MLS) resistance transposon Tn917, was introduced into strains of Lactobacillus plantarum by electroporation. After two passages in broth medium selecting for MLS resistance at 40 degrees C and subsequent plating on solid medium, two strains, L. plantarum NC4Ts1 and L. plantarum NC7Ts5, lost chloramphenicol resistance but retained MLS resistance, indicative of Tn917 transposition into host DNA. Analysis of DNA from MLSrCms isolates from both strains revealed Tn917 insertions into resident plasmids. Restriction analysis of plasmid DNA from four MLSrCms isolates from NC7Ts5 indicated four different insertion sites.     

Plasmid instability inLactobacillus plantarum strain caTC2

The stability of plasmids inLactobacillus plantarum was investigated by extended incubation of bacterial cells in the presence of different carbohydrates. Strain caTC2, carrying a plasmid-encoded chloramphenicol-resistant (Cm^r) phenotype, was grown overnight (16–18 h) in MRS, MRS-L, and MRS-M broths containing 2% glucose, lactose, and maltose respectively at 30°C. The cultures were subsequently held at 30°C and room temperature (21±1°C) for an extended period (7 days). The total viable cell counts were assayed on MRS agar plates and tested for sensitivity to 30 g chloramphenicol/ml by replica plating. The plasmid profiles of the chloramphenicol-sensitive strains showed that there was a loss of the 8.5-kb plasmid, but not the 10.6 or 6.5 kb plasmids. Concomitant loss of the chloramphenicol resistance phenotype and plasmid at high frequency, particularly by using MRS-L at 21°C method, suggests that this would be a simple and efficient method for curing selected plasmids in lactobacilli.Contribution No. 2039 from the Centre for Food and Animal Research.     

Mobilization and expression of bacteriocin plasmids from Carnobacterium piscicola isolated from meat

Mobilization and expression of bacteriocin plasmids from Carnobacterium piscicola isolated from meat. The nonconjugative plasmids pCP40 and pCP49 associated with bacteriocin production in Carnobacterium piscicola LV17, a lactic acid bacterium isolated from meat, were mobilized by the wide host range conjugative plasmid pAMβ1 by two stage conjugation. At the first stage, pAMβ1 was conjugally transferred into C. piscicola LV17 containing the two plasmids associated with bacteriocin production and a cryptic plasmid. Mobilization of the two bacteriocin plasmids by pAMβ1 was done by the second stage conjugation between the pAMβ1-containing C. piscicola LV17 and chloramphenicol (Cm)-resistant Bac^- mutant of C. piscicola LV17. The transconjugants had either partial bacteriocin activity associated with acquisition of pCP40 or pCP49, or complete bacteriocin activity associated with acquisition of all three of the resident plasmids from C. piscicola LV17 or an 89 MDa cointegrated plasmid derived from pCP40 and pCP49. Further manipulation of the transconjugants and a mutant strain of C. piscicola LV17 resulted in separate strains with only pCP40 or pCP49 which produce different bacteriocins. The bacteriocin gene from pCP49 was cloned into pCaT, a chloramphenicol resistance-encoding vector, and electrotransformed into another bacteriocin-producing strain of C. piscicola , enhancing the antagonistic spectrum of the recipient strain.     

Characterization, cloning, curing, and distribution in lactic acid bacteria of pLP1, a plasmid from Lactobacillus plantarum CCM 1904 and its use in shuttle vector construction

A small 2.1-kb plasmid called pLP1 was extracted from Lactobacillus plantarum CCM 1904 (ATCC 8014) and cloned into the Escherichia coli pUC19 plasmid. As determined by DNA-DNA Southern hybridization with a pLP1-radioactively labeled probe, other lactic acid bacteria such as L. curvatus, L. sake, Carnobacterium, and Leuconostoc mesenteroides harbor pLP1-related plasmids. Shuttle vectors based on the pLP1 replicon were constructed by inserting the erythromycin-resistance gene from pVA891 into the various pUC19-pLP1 constructions. pLP1-based shuttle vector transformation efficiencies (TE) by electroporation were compared to TE of a broad-host-range plasmid pGK12 in different lactobacilli strains. Expression of the pUC19-pLP1 plasmids in Escherichia coli maxicells showed that pLP1 encodes for a 37,000 MW protein which can act in trans allowing the replication of plasmids in which this protein is truncated. The pLP1-based shuttle vectors producing this protein replicate in lactobacilli and also in Bacillus subtilis. A pLP1-free strain was obtained by incompatibility with a pLP1-based shuttle vector introduced in L. plantarum CCM 1904 by electroporation. The absence of pLP1 has no incidence on the strain phenotype suggesting that pLP1 is not essential for the strain in our laboratory conditions.     

Genetic modification of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> by heterologous gene integration in a not functional region of the chromosome

This report describes the vector-free engineering of Lactobacillus plantarum by chromosomal integration of an exogenous gene without inactivation of physiological traits. The integrative plasmid vector pP7B6 was derived from pGIP73 by replacing the cbh site, encoding the L. plantarum conjugated bile salt hydrolase, with the prophage fragment P7B6, from L. plantarum Lp80 (DSM 4229). Plasmid pP7B6NI was obtained by inserting the nisin immunity gene nisI of Lactococcus lactis subsp. lactis DSM 20729, preceded by the constitutive promoter P32 from the same strain, in a unique XbaI site of fragment P7B6 and was used to electrotransform L. plantarum Lp80. A food grade recombinant L. plantarum Lp80NI, with 480-fold higher immunity to nisin than the wild type, was derived by integration of pP7B6NI followed by the excision of pP7B6. Polymerase chain reaction tests demonstrated that the integration of nisI in the prophage region had occurred and that the erythromycin resistance marker from pP7B6 was lost. Fifteen among 31 L. plantarum strains tested hybridized with P7B6, indicating that the integration of pP7B6-derived vectors might occur in some other L. plantarum strains. This was experimentally confirmed by constructing the recombinant strain L. plantarum LZNI from the dairy isolate L. plantarum LZ (LMG 24600).     

Isolation of a replication region of a large lactococcal plasmid and use in cloning of a nisin resistance determinant

The replication region of a 28-kilobase-pair (kbp) cryptic plasmid from Lactococcus lactis subsp. lactis biovar diacetylactis SSD207 was cloned in L. lactis subsp. lactis MG1614 by using the chloramphenicol resistance gene from the streptococcal plasmid pGB301 as a selectable marker. The resulting 8.1-kbp plasmid, designated pVS34, was characterized further with respect to host range, potential cloning sites, and location of replication gene(s). In addition to lactococci, pVS34 transformed Lactobacillus plantarum and, at a very low frequency, Staphylococcus aureus but not Escherichia coli or Bacillus subtilis. The 4.1-kbp ClaI fragment representing lactococcal DNA in pVS34 contained unique restriction sites for HindIII, EcoRI, XhoII, and HpaII, of which the last three could be used for molecular cloning. A region necessary for replication was located within a 2.5-kbp fragment flanked by the EcoRI and ClaI restriction sites. A 3.8-kbp EcoRI fragment derived from a nisin resistance plasmid, pSF01, was cloned into the EcoRI site of pVS34 to obtain a nisin-chloramphenicol double-resistance plasmid, pVS39. From this plasmid, the streptococcal chloramphenicol resistance region was subsequently eliminated. The resulting plasmid, pVS40, contains only lactococcal DNA. Potential uses for this type of a nisin resistance plasmid are discussed.     

Isolation of a replication region of a large lactococcal plasmid and use in cloning of a nisin resistance determinant.

The replication region of a 28-kilobase-pair (kbp) cryptic plasmid from Lactococcus lactis subsp. lactis biovar diacetylactis SSD207 was cloned in L. lactis subsp. lactis MG1614 by using the chloramphenicol resistance gene from the streptococcal plasmid pGB301 as a selectable marker. The resulting 8.1-kbp plasmid, designated pVS34, was characterized further with respect to host range, potential cloning sites, and location of replication gene(s). In addition to lactococci, pVS34 transformed Lactobacillus plantarum and, at a very low frequency, Staphylococcus aureus but not Escherichia coli or Bacillus subtilis. The 4.1-kbp ClaI fragment representing lactococcal DNA in pVS34 contained unique restriction sites for HindIII, EcoRI, XhoII, and HpaII, of which the last three could be used for molecular cloning. A region necessary for replication was located within a 2.5-kbp fragment flanked by the EcoRI and ClaI restriction sites. A 3.8-kbp EcoRI fragment derived from a nisin resistance plasmid, pSF01, was cloned into the EcoRI site of pVS34 to obtain a nisin-chloramphenicol double-resistance plasmid, pVS39. From this plasmid, the streptococcal chloramphenicol resistance region was subsequently eliminated. The resulting plasmid, pVS40, contains only lactococcal DNA. Potential uses for this type of a nisin resistance plasmid are discussed.     

Characterization of a gram-positive broad-host-range plasmid isolated from Lactobacillus hilgardii

Two plasmids, pLAB1000 and pLAB2000 (3.3 and 9.1 kb, respectively), have been isolated from a grass silage strain of Lactobacillus hilgardii. Both plasmids were cloned in Escherichia coli and characterized through restriction mapping. A 1.6-kb XbaI-SacI fragment of pLAB1000 appeared to be sufficient for autonomous replication in Lactobacillus plantarum and in Bacillus subtilis. Different shuttle vectors for E. coli and gram-positive bacteria were developed using the pLAB1000 plasmid. These could stably be maintained in Lactobacillus, Enterococcus, and Bacillus under selective conditions. Plasmids sharing DNA homologies with pLAB1000 have been observed in different strains of the related species L. plantarum.     

Functional analysis of three plasmids from Lactobacillus plantarum

Lactobacillus plantarum WCFS1 harbors three plasmids, pWCFS101, pWCFS102, and pWCFS103, with sizes of 1,917, 2,365, and 36,069 bp, respectively. The two smaller plasmids are of unknown function and contain replication genes that are likely to function via the rolling-circle replication mechanism. The host range of the pWCFS101 replicon includes Lactobacillus species and Lactococcus lactis, while that of the pWCFS102 replicon also includes Carnobacterium maltaromaticum and Bacillus subtilis. The larger plasmid is predicted to replicate via the theta-type mechanism. The host range of its replicon seems restricted to L. plantarum. Cloning vectors were constructed based on the replicons of all three plasmids. Plasmid pWCFS103 was demonstrated to be a conjugative plasmid, as it could be transferred to L. plantarum NC8. It confers arsenate and arsenite resistance, which can be used as selective markers.     

Characterization of Bacteroides ovatus plasmid pBI136 and structure of its clindamycin resistance region.

Genetic and physical analyses were used to characterize the Bacteroides ovatus R plasmid pBI136. Results from restriction endonuclease cleavage studies were used to construct a physical map of the plasmid for the enzymes EcoRI, BamHI, ClaI, XbaI, SalI, and SmaI. Based on the sizes of restriction fragments generated in these studies, the plasmid was estimated to be 80.6 kilobase pairs (kb). A 7.2-kb region of the plasmid required for resistance to lincosamide and macrolide (LM) antibiotics was mapped by analysis of spontaneously occurring LM-sensitive deletion derivatives. Hybridization studies showed that this region and an adjoining 2.9-kb EcoRI fragment were responsible for the previously reported homology among Bacteroides plasmids pBF4, pBFTM10, and pBI136. Within this region of homology, 0.5 kb was attributed to a directly repeated sequence thought to bound the LM resistance determinant on pBF4 and pBFTM10. Two pBI136 EcoRI fragments spanning the putative LM resistance region were cloned in Escherichia coli, and heteroduplex analysis of these recombinant plasmids revealed the presence of a 1.2-kb directly repeated sequence. These results suggested that the pBI136 LM resistance determinant resides on an 8.4-kb segment of DNA containing 6.0 kb of intervening DNA sequences bounded by a 1.2-kb directly repeated sequence.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Molecular cloning of eucaryotic genes required for excision repair of UV-irradiated DNA: isolation and partial characterization of the RAD3 gene of Saccharomyces cerevisiae.

We describe the molecular cloning of a 6-kilobase (kb) fragment of yeast chromosomal DNA containing the RAD3 gene of Saccharomyces cerevisiae. When present in the autonomously replicating yeast cloning vector YEp24, this fragment transformed two different UV-sensitive, excision repair-defective rad3 mutants of S. cerevisiae to UV resistance. The same result was obtained with a variety of other plasmids containing a 4.5-kb subclone of the 6-kb fragment. The UV sensitivity of mutants defective in the RAD1, RAD2, RAD4, and RAD14 loci was not affected by transformation with these plasmids. The 4.5-kb fragment was subcloned into the integrating yeast vector YIp5, and the resultant plasmid was used to transform the rad3-1 mutant to UV resistance. Both genetic and physical studies showed that this plasmid integrated by homologous recombination into the rad3 site uniquely. We conclude from these studies that the cloned DNA that transforms the rad3-1 mutant to UV resistance contains the yeast chromosomal RAD3 gene. The 4.5-kb fragment was mapped by restriction analysis, and studies on some of the subclones generated from this fragment indicate that the RAD3 gene is at least 1.5 kb in size.     

The minimal replicon of a Streptomycete plasmid produces an ultrahigh level of plasmid DNA

A functional map of Streptomyces coelicolor plasmid SCP2* was deduced from derivatives constructed by in vitro deletions. Functions were analyzed on bifunctional shuttle plasmids that contained pBR322 for selection and replication in Escherichia coli and fragments of SCP2* for replication in Streptomyces griseofuscus C581 and strains of Streptomyces lividans. The aph gene for neomycin resistance from Streptomyces fradiae and the tsr gene for thiostrepton resistance from Streptomyces azureus were incorporated as selectable antibiotic resistance markers in streptomycetes. An 11.8-kb sequence bounded by EcoRI and KpnI restriction sites contains the information for self-transfer and normal replication of the plasmid. A 5.9-kb EcoRI-SalI fragment contains all of the information for normal replication. Partial digestion generated a 2.2-kb Sau3A fragment that is sufficient for replication but it produces ten times higher plasmid copy number than the basic replicon. pHJL400 and PHJL401 are useful shuttle vectors containing the moderate-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19. A 1.4-kb BclI-Sau3A fragment with an additional internal BclI site contains the minimal replicon but it produces 1000 times higher plasmid copy number than the basic replicon. pHJL302 is a useful shuttle vector containing the ultrahigh-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19.     

Characterization of the tetracycline resistance plasmid pMD5057 from Lactobacillus plantarum 5057 reveals a composite structure

The 10,877bp tetracycline resistance plasmid pMD5057 from Lactobacillus plantarum 5057 was completely sequenced. The sequence revealed a composite structure containing DNA from up to four different sources. The replication region had homology to other plasmids of lactic acid bacteria while the tetracycline resistance region, containing a tet(M) gene, had high homology to sequences from Clostridium perfringens and Staphylococcus aureus. Within the tetracycline resistance region a Lactobacillus IS-element was found. The remaining part of the plasmid contained three open reading frames with unknown functions. The composite structure with several truncated genes suggests a recent assembly of the plasmid. This is the first sequence of an antibiotic resistance plasmid isolated from L. plantarum.