Nonallelic histone gene clusters of individual sea urchins (Lytechinus pictus): mapping of homologies in coding and spacer DNA

The linear arrangement and lengths of the spacers and coding regions in the two nonallelic histone gene variant clusters of L. pictus are remarkably homologous by R loop analysis and are similar in general topography to the histone gene repeat units of other sea urchins examined to date. No interventing sequences were detected. The coding regions of these two histone gene variants share considerable sequence homology; however, there are areas of nonhomology in every spacer region and the lengths of the nonhomologous spacers between the H2A and H1 genes are not the same for the two repeat unit classes (inter-gene heterogeneity). Combining length measurements obtained with both R loops and heteroduplexes suggests that the DNA sequences of the analogous leader regions for the two H1 mRNAs are nonhomologous. Similar observations were made for the H4 leader sequences, as well as the trailer region on H2B. S. purpuratus spacer DNA segments share little sequence homology with L. pictus; however, the analgous coding (and possibly flanking) regions have conserved their sequences. The various coding and spacer regions within a repeat unit do not share DNA sequences. Thus certain areas in the sea urchin histone gene repeat units have been highly conserved during evolution, while other areas have been allowed to undergo considerable sequence change not only between species but within a species.     

The organization of sea urchin histone genes

Sucrose gradient analysis of total sea urchin DNA cleaved with theEcoRI andHind III restriction endonucleases and identification of histone coding gene sequences by hybridization with histone mRNA have elucidated the basic organization of the histone gene repeat unit. These data, plus results obtained by electrophoretic analysis of purified endonuclease-cleaved sea urchin histone DNA and hybridization with cRNA transcribed from the eucaryotic segment of constructed plasmid chimeras cloned in E. coli, show that the several DNA sequences coding for individual histone proteins are intermingled in a 7 kilobase (kb) repeat unit. Cleavage of total sea urchin DNA withEcoRI produces 2.2 and 4.8 kb fragments which are homologous with the two cloned fragments, and which are contained in a 7 kbHind III fragment. Cleavage with both enzymes reveals that the 2.2 kbEcoRI fragment contains aHind III site 0.15–0.2 kb from an end. RNA · DNA hybridization between chimeric plasmid DNA and purified individual mRNAs isolated from sea urchin embryo polyribosomes has been used to assign coding sequences to either the 2.2 or 4.8 kb region of the histone DNA repeat unit. A map of the histone genes is proposed.     

Sequence arrangement of the rRNA genes of the dipteran Sarcophaga bullata

Velocity sedimentation studies of RNA of Sarcophaga bullata show that the major rRNA species have sedimentation values of 26S and 18S. Analysis of the rRNA under denaturing conditions indicates that there is a hidden break centrally located in the 26S rRNA species. Saturation hybridization studies using total genomic DNA and rRNA show that 0.08% of the nuclear DNA is occupied by rRNA coding sequences and that the average repetition frequency of these coding sequences is approximately 144. The arrangement of the rRNA genes and their spacer sequences on long strands of purified rDNA was determined by the examination of the structure of rRNa:DNA hybrids in the electron microscope. Long DNA strands contain several gene sets (18S + 26S) with one repeat unit containing the following sequences in order given: (a) An 18S gene of length 2.12 kb, (b) an internal transcribed spacer of length 2.01 kb, which contains a short sequence that may code for a 5.8S rRNA, (c) A 26S gene of length 4.06 kb which, in 20% of the cases, contains an intron with an average length of 5.62 kb, and (d) an external spacer of average length of 9.23 kb.     

Structure of the sea urchin U1 RNA repeat.

The genes coding for U1 RNA in the sea urchin L. variegatus are present in a 1400 base pair tandem repeat. One member of the repeat has been cloned and its sequence determined. The repeat unit contains a single copy of the gene for L. variegatus U1 RNA. This gene encodes an RNA which is 75% homologous to mammalian U1 RNA. The L. variegatus U1 RNA could assume a secondary structure similar to that proposed for other U1 RNAs. In addition the L. variegatus U1 RNA is precipitated by anti-SM and anti-RNP antisera. Analysis of the L. variegatus genomic DNA using the cloned U1 gene as a probe reveals a major and a minor type of repeat unit. The two repeated units are the same length but differ in a number of restriction enzyme sites clustered 200-500 bases down-stream from the gene. The monomer we have cloned and sequenced is a representative of the minor repeat. A sequence (GATAA) which is -41 to -37 bases 5' to the gene has homology to the putative RNA polymerase II promoter. Fifteen bases 3' of the gene is a sequence (CAAAGAAAGAAAA) which is very similar to the sequence found 3' of the sea urchin histone genes. The two Hha I, Hpa II and Ava I sites in the repeat are all unmethylated in sperm DNA.     

Histone genes of the sea urchin (S. purpuratus) cloned in E. coli: Order,polarity, and strandedness of the five histone-coding and spacer regions

Sea urchin (S. purpuratus) histone DNA of constructed plasmid chimeras cloned in E. coli was cleaved with the restriction endonucleases Eco RI, Hind III, Sal I, Bam I, and Hha I. The resulting fragments were ordered and isolated directly from agarose gels or cloned into other plasmids. Each fragment hybridized to one or another of the five histone mRNAs and elucidated the order of the histone genes in each of the cloned fragments. Some DNA did not hybridize to histone mRNAs and was identified as spacer DNA located between coding regions.Total sea urchin DNA was cleaved with restriction endonucleases, fractionated on agarose gels, and hybridized to histone mRNAs or histone DNA. The results revealed the order of the five histone genes in the histone gene repeat unit and demonstrate that the histone spacer DNAs have little sequence homology to other genes. Exonuclease III digestion of specific linear chimeric histone DNA plasmids followed by hybridization with mRNAs demonstrated the existence of all five histone genes on one strand of DNA and the 5′-3′ polarity of that strand. These results, in conjunction with the data of Wu et al. (1976), allow us to construct a map of coding and spacer sequences in the transcribed strand of the S. purpuratus histone gene repeat unit:

     

5S ribosomal and U1 small nuclear RNA genes: a new linkage type in the genome of a crustacean that has three different tandemly repeated units containing 5S ribosomal DNA sequences.

We investigated the 5S ribosomal RNA (rRNA) genes of the isopod crustacean Asellus aquaticus. Using PCR amplification, three different tandemly repeated units containing 5S rDNA were identified. Two of the three sequences were cloned and sequenced. One of them was 1842 bp and presented a 5S rRNA gene and a U1 small nuclear RNA (snRNA) gene. This type of linkage had never been observed before. The other repeat consisted of 477 bp and contained only an incomplete 5S rRNA gene lacking the first eight nucleotides and a spacer sequence. The third sequence was 6553 bp long and contained a 5S rRNA gene and the four core histone genes. The PCR products were used as probes in fluorescent in situ hybridization (FISH) experiments to locate them on chromosomes of A. aquaticus. The possible evolutionary origin of the three repeated units is discussed.     

Yeast H3 and H4 histone messenger RNAs are transcribed from two non-allelic gene sets

The genes coding for the H3 and H4 histones of Saccharomyces cerevisiae have been isolated by recombinant DNA cloning. The genes were detected in a bacteriophage lambda library of the yeast genome by hybridization with plasmids containing the cloned Psammechinus miliaris sea urchin histone genes (pCH7) and the cloned Drosophila histone genes (cDM500). Two non-allelic sets of the H3 and H4 genes have been isolated. Each set consists of one H3 gene and one H4 gene arranged as a divergently transcribed pair separated by an intergene spacer DNA. The histone genes were located on the cloned yeast fragments by S1 nuclease mapping, as was a gene (SMT1) of unknown function that does not code for a histone but is closely linked to one of the histone sets. Sequence homology between the two non-allelic sets is confined to the coding regions of the respective genes while the flanking DNA and intergene spacer DNA are extensively divergent. Cellular RNA homologous to the histone genes, including transcribed non-coding sequences unique to each of the four genes, was detected by S1 mapping, thus demonstrating that all four genes are transcribed in vegetative cells.     

Sequence organization of two recombinant plasmids containing genes for the major heat shock-induced protein of D. melanogaster.

We have isolated recombinant DNA clones which include cDNA and chromosomal DNA sequences of the major heat shock-inducible gene of Drosophila. With the cDNA fragments used as specific hybridization probes, DNA:DNA reassociation and in situ hybridization analysis demonstrated that the DNA sequences are repeated approximately 7 times in the haploid Drosophila genome, and that gene sequences are present at both the 87A and 87C loci on the cytological map. The cloned cDNA and homologous cloned chromosomal DNA hybridized to mRNA which translated in vitro into the major 70K heat shock-specific protein. Here we summarize a study of the organization of genes coding for the 70K heat shock-specific protein contained in the two recombinant chromosomal DNA plasmids pG3 and pG5. On the basis of R loop hybridization experiments and restriction enzyme analysis, we conclude that a 14 kb fragment, G3, contains three copies of the gene coding for the 70K protein. A second 9.2 kb fragment, G5, contains one copy of the gene coding for the 70K protein. Hybridization of labeled poly(A)-containing RNA to restriction endonuclease-cleaved DNA indicates that the mRNA coding regions in G3 and G5 are each approximately 2100 bp long. The three tandemly repeated genes of G3 are separated by approximately 1400 bp of spacer DNA. The two internal spacer regions in G3 appear to be identical, whereas differences in restriction enzyme sites indicate that the sequences adjacent to the cluster differ from the internal spacer and from each other.