Role of membranes in the activities of antimicrobial cationic peptides

Cationic amphiphilic peptides that are found throughout nature have very broad-spectrum activities against microbes. The initial sites of interaction are with microbial membranes. Although dogma suggests that their lethal action involves disruption of the cytoplasmic membranes, a number of cationic peptides can traverse intact membranes to interact with internal targets.     

Toroidal pores formed by antimicrobial peptides show significant disorder

A large variety of antimicrobial peptides have been shown to act, at least in vitro, by poration of the lipid membrane. The nanometre size of these pores, however, complicates their structural characterization by experimental techniques. Here we use molecular dynamics simulations, to study the interaction of a specific class of antimicrobial peptides, melittin, with a dipalmitoylphosphatidylcholine bilayer in atomic detail. We show that transmembrane pores spontaneously form above a critical peptide to lipid ratio. The lipid molecules bend inwards to form a toroidally shaped pore but with only one or two peptides lining the pore. This is in strong contrast to the traditional models of toroidal pores in which the peptides are assumed to adopt a transmembrane orientation. We find that peptide aggregation, either prior or after binding to the membrane surface, is a prerequisite to pore formation. The presence of a stable helical secondary structure of the peptide, however is not. Furthermore, results obtained with modified peptides point to the importance of electrostatic interactions in the poration process. Removing the charges of the basic amino-acid residues of melittin prevents pore formation. It was also found that in the absence of counter ions pores not only form more rapidly but lead to membrane rupture. The rupture process occurs via a novel recursive poration pathway, which we coin the Droste mechanism.     

Driving engineering of novel antimicrobial peptides from simulations of peptide-micelle interactions

Simulations of antimicrobial peptides in membrane mimics can provide the high resolution, atomistic picture that is necessary to decipher which sequence and structure components are responsible for activity and toxicity. With such detailed insight, engineering new sequences that are active but non-toxic can, in principle, be rationalized. Armed with supercomputers and accurate force fields for biomolecular interactions, we can now investigate phenomena that span hundreds of nanoseconds. Although the phenomena involved in antimicrobial activity, (i.e., diffusion of peptides, interaction with lipid layers, secondary structure attainment, possible surface aggregation, possible formation of pores, and destruction of the lipid layer integrity) collectively span time scales still prohibitively long for classical mechanics simulations, it is now feasible to investigate the initial approach of single peptides and their interaction with membrane mimics. In this article, we discuss the promise and the challenges of widely used models and detail our recent work on peptide-micelle simulations as an attractive alternative to peptide-bilayer simulations. We detail our results with two large structural classes of peptides, helical and beta-sheet and demonstrate how simulations can assist in engineering of novel antimicrobials with therapeutic potential.     

Studies on anticancer activities of antimicrobial peptides

In spite of great advances in cancer therapy, there is considerable current interest in developing anticancer agents with a new mode of action because of the development of resistance by cancer cells towards current anticancer drugs. A growing number of studies have shown that some of the cationic antimicrobial peptides (AMPs), which are toxic to bacteria but not to normal mammalian cells, exhibit a broad spectrum of cytotoxic activity against cancer cells. Such studies have considerably enhanced the significance of AMPs, both synthetic and from natural sources, which have been of importance both for an increased understanding of the immune system and for their potential as clinical antibiotics. The electrostatic attraction between the negatively charged components of bacterial and cancer cells and the positively charged AMPs is believed to play a major role in the strong binding and selective disruption of bacterial and cancer cell membranes, respectively. However, it is unclear why some host defense peptides are able to kill cancer cells when others do not. In addition, it is not clear whether the molecular mechanism(s) underlying the antibacterial and anticancer activities of AMPs are the same or different. In this article, we review various studies on different AMPs that exhibit cytotoxic activity against cancer cells. The suitability of cancer cell-targeting AMPs as cancer therapeutics is also discussed.     

Effect of salt on the interactions of antimicrobial peptides with zwitterionic lipid bilayers

The effect of salt on the binding of the antimicrobial peptide magainin to POPC lipid bilayers is studied by 40-50 ns molecular dynamics simulations of a POPC bilayer in the presence of different concentrations of Na+ and Cl− ions, corresponding to effective concentrations of 0, 100, 150, 200, 250 and 300 millimolar NaCl, with and without a single molecule of antimicrobial peptide magainin. Simulations without magainin showed that increasing salt concentration leads to the decrease in the area per lipid, a decrease in the head group tilt of the lipids, as well as increased order of lipid tails, in agreement with other recent simulations. Simulations with magainin show that peptide binding to the lipids is stronger at lower concentrations of salt. The peptides disorder the lipids in their immediate vicinity, but this effect is diminished as the salt concentration increases. Our studies indicate that while 50 ns simulations give information on peptide hydrogen bonding and lipid tail ordering that is insensitive to the initial peptide orientation, this run time is not sufficient to equilibrate the peptide position and orientation within the bilayer.     

The RH 421 styryl dye induced,pore model-dependent modulation of antimicrobial peptides activity in reconstituted planar membranes

Background

Antimicrobial agents, with different pore-formation mechanisms, may be differently influenced by alteration of the dipolar electric field of a lipid membrane.

Methods

By using electrophysiological measurements on reconstituted lipid membranes, we used alamethicin, melittin and magainin to report on how controlled manipulation of the membrane dipole potential by the styrylpyridinium dye RH 421 affects the kinetic and transport features of peptides within membranes.

Results

Our data demonstrate that the increase of the membrane dipole potential caused by RH 421 decreases the activity and single-channel conductance of alamethicin. Surprisingly, we found that RH 421 increases the activity of melittin and magainin, suggesting that RH 421 may contribute via electrostatic repulsions, among others, to an increase in the monolayer spontaneous curvature of the membrane. We propose that RH 421-induced dipole potential and membrane elasticity changes alter the peptide-induced channel dynamics, and the prevalence of one mechanism over the other for particular classes of peptides is dictated by the electrical and mechanical interactions which rule the pore-formation mechanism of such peptides.

General significance

These results point to a novel paradigm in which electrical and mechanical effects promoted by chemicals which preferentially alter the electrostatics of the membrane, may be employed to help distinguish among various pore-formation mechanisms of membrane-permeabilizing peptides.     

Molecular mechanism of antimicrobial peptides: The origin of cooperativity

Based on very extensive studies on four peptides (alamethicin, melittin, magainin and protegrin), we propose a mechanism to explain the cooperativity exhibited by the activities of antimicrobial peptides, namely, a non-linear concentration dependence characterized by a threshold and a rapid rise to saturation as the concentration exceeds the threshold. We first review the structural basis of the mechanism. Experiments showed that peptide binding to lipid bilayers creates two distinct states depending on the bound-peptide to lipid ratio P/L. For P/L below a threshold P/L*, all of the peptide molecules are in the S state that has the following characteristics: (1) there are no pores in the membrane, (2) the axes of helical peptides are oriented parallel to the plane of membrane, and (3) the peptide causes membrane thinning in proportion to P/L. As P/L increases above P/L*, essentially all of the excessive peptide molecules occupy the I state that has the following characteristics: (1) transmembrane pores are detected in the membrane, (2) the axes of helical peptides are perpendicular to the plane of membrane, (3) the membrane thickness remains constant for P/L ≥ P/L*. The free energy based on these two states agrees with the data quantitatively. The free energy also explains why lipids of positive curvature (lysoPC) facilitate and lipids of negative curvature (PE) inhibit pore formation.     

Novel lactoferrampin antimicrobial peptides derived from human lactoferrin

Human lactoferrampin is a novel antimicrobial peptide found in the cationic N-terminal lobe of the iron-binding human lactoferrin protein. The amino acid sequence that directly corresponds to the previously characterized bovine lactoferrin-derived lactoferrampin peptide is inactive on its own (WNLLRQAQEKFGKDKSP, residues 269-285). However, by increasing the net positive charge near the C-terminal end of human lactoferrampin, a significant increase in its antibacterial and Candidacidal activity was obtained. Conversely, the addition of an N-terminal helix cap (sequence DAI) did not have any appreciable effect on the antibacterial or antifungal activity of human lactoferrampin peptides, even though it markedly influenced that of bovine lactoferrampin. The solution structure of five human lactoferrampin variants was determined in SDS micelles and all of the structures display a well-defined amphipathic N-terminal helix and a flexible cationic C-terminus. Differential scanning calorimetry studies indicate that this peptide is capable of inserting into the hydrophobic core of a membrane, while fluorescence spectroscopy results suggest that a hydrophobic patch encompassing the single Trp and Phe residues as well as Leu, Ile and Ala side chains mediates the interaction between the peptide and the hydrophobic core of a phospholipid bilayer.     

Methodology for identification of pore forming antimicrobial peptides from soy protein subunits β-conglycinin and glycinin

Antimicrobial peptides (AMPs) inactivate microbial cells through pore formation in cell membrane. Because of their different mode of action compared to antibiotics, AMPs can be effectively used to combat drug resistant bacteria in human health. AMPs can also be used to replace antibiotics in animal feed and immobilized on food packaging films. In this research, we developed a methodology based on mechanistic evaluation of peptide-lipid bilayer interaction to identify AMPs from soy protein. Production of AMPs from soy protein is an attractive, cost-saving alternative for commercial consideration, because soy protein is an abundant and common protein resource. This methodology is also applicable for identification of AMPs from any protein. Initial screening of peptide segments from soy glycinin (11S) and soy β-conglycinin (7S) subunits was based on their hydrophobicity, hydrophobic moment and net charge. Delicate balance between hydrophilic and hydrophobic interactions is necessary for pore formation. High hydrophobicity decreases the peptide solubility in aqueous phase whereas high hydrophilicity limits binding of the peptide to the bilayer. Out of several candidates chosen from the initial screening, two peptides satisfied the criteria for antimicrobial activity, viz. (i) lipid-peptide binding in surface state and (ii) pore formation in transmembrane state of the aggregate. This method of identification of antimicrobial activity via molecular dynamics simulation was shown to be robust in that it is insensitive to the number of peptides employed in the simulation, initial peptide structure and force field. Their antimicrobial activity against Listeria monocytogenes and Escherichia coli was further confirmed by spot-on-lawn test.     

Lipoic acid modified antimicrobial peptide with enhanced antimicrobial properties

RIWVIWRR-NH₂ (Bac8c) is a natural antimicrobial peptide (AMP) exhibiting great antibacterial activity against Gram-negative and Gram-positive bacteria. In this work, lipoic acid was used as a fatty acid hydrophobic ligand to modify Bac8c (LA-Bac8c) to further improve its antimicrobial properties. Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) assays showed that LA-Bac8c exhibited lower MIC (MBC) values against Staphylococcus aureus (S. aureus) and methicillin-resistant Staphylococcus aureus (MRSA) than Bac8c. Similar results were reflected in the antibiofilm activity towards S. aureus and MRSA, and LA-Bac8c showed better activity to the biofilm which has been formed or is being formed. In addition to this, the obvious interaction between bacteria/biofilm and LA-Bac8c was observed by microscopy. LA-Bac8c displayed strong membrane depolarization and outer membrane permeabilizing ability, and the cell membrane treated with LA-Bac8c was destroyed to the leakage of bacteria cellular components. All these data indicated LA-Bac8c could be used as a useful antimicrobial peptide with wide application prospect.     

Action mechanism and structural requirements of the antimicrobial peptides, gaegurins

Gaegurins (GGNs) are a family of cationic, α-helical, antimicrobial peptides that were isolated from a Korean frog, Glandirana emeljanovi (formerly classified as Rana rugosa) and represent one of the structurally well-characterized groups. Among six gaegurins, gaegurin 4 (renamed herein esculentin-2EM), gaegurin 5 (brevinin-1EMa), and gaegurin 6 (brevinin-1EMb) have been investigated comprehensively in terms of structure-activity relationships. In this paper, we first suggest renaming of gaegurins according to a recently raised rule of systematic nomenclature. Then, the current understanding of gaegurins is reviewed by summarizing their structure-activity relationships. In particular competing arguments on gaegurins are synthetically inspected. Finally their action mechanism and structural requirements will be discussed.     

LL-37, the only human member of the cathelicidin family of antimicrobial peptides

Antimicrobial peptides and their precursor molecules form a central part of human and mammalian innate immunity. The underlying genes have been thoroughly investigated and compared for a considerable number of species, allowing for phylogenetic characterization. On the phenotypical side, an ever-increasing number of very varied and distinctive influences of antimicrobial peptides on the innate immune system are reported. The basic biophysical understanding of mammalian antimicrobial peptides, however, is still very limited. This is especially unsatisfactory since knowledge of structural properties will greatly help in the understanding of their immunomodulatory functions. The focus of this review article will be on LL-37, the only cathelicidin-derived antimicrobial peptide found in humans. LL-37 is a 37-residue, amphipathic, helical peptide found throughout the body and has been shown to exhibit a broad spectrum of antimicrobial activity. It is expressed in epithelial cells of the testis, skin, the gastrointestinal tract, and the respiratory tract, and in leukocytes such as monocytes, neutrophils, T cells, NK cells, and B cells. It has been found to have additional defensive roles such as regulating the inflammatory response and chemo-attracting cells of the adaptive immune system to wound or infection sites, binding and neutralizing LPS, and promoting re-epthelialization and wound closure. The article aims to report the known biophysical facts, with an emphasis on structural evidence, and to set them into relation with insights gained on phylogenetically related antimicrobial peptides in other species. The multitude of immuno-functional roles is only outlined. We believe that this review will aid the future work on the biophysical, biochemical and immunological investigations of this highly intriguing molecule.     

Correlation between simulated physicochemical properties and hemolycity of protegrin-like antimicrobial peptides: predicting experimental toxicity

The therapeutic, antibiotic potential of antimicrobial peptides can be prohibitively diminished because of the cytotoxicity and hemolytic profiles they exhibit. Quantifying and predicting antimicrobial peptide toxicity against host cells is thus an important goal of AMP related research. In this work, we present quantitative structure activity relationships for toxicity of protegrin-like antimicrobial peptides against human cells (epithelial and red blood cells) based on physicochemical properties, such as interaction energies and radius of gyration, calculated from molecular dynamics simulations of the peptides in aqueous solvent. The hypothesis is that physicochemical properties of peptides, as manifest by their structure and interactions in a solvent and as captured by atomistic simulations, are responsible for their toxicity against human cells. Protegrins are beta-hairpin peptides with high activity against a wide variety of microbial species, but in their native state are toxic to human cells. Sixty peptides with experimentally determined toxicities were used to develop the models. We test the resulting relationships to determine their ability to predict the toxicity of several protegrin-like peptides. The developed QSARs provide insight into the mechanism of cytotoxic action of antimicrobial peptides. In a subsequent blind test, the QSAR correctly ranked four of five protegrin analogues newly synthesized and tested for toxicity.     

Simplified lipid II-binding antimicrobial peptides: Design,synthesis and antimicrobial activity of bioconjugates of nisin rings A and B with pore-forming peptides

New designs of antimicrobial peptides are urgently needed in order to combat the threat posed by the recent increase of resistance to antibiotics. In this paper, we present a new series of antimicrobial peptides, based on the key structural features of the lantibiotic nisin. We have simplified the structure of nisin by conjugating the lipid II-binding motif at the N-terminus of nisin to a series of cationic peptides and peptoids with known antibacterial action and pore-forming properties. Hybrid peptides, where a hydrophilic PEG4 linker was used, showed good antibacterial activity against Micrococcus luteus.     

Antimicrobial peptides in toroidal and cylindrical pores

Antimicrobial peptides (AMPs) are small, usually cationic peptides, which permeabilize biological membranes. Their mechanism of action is still not well understood. Here we investigate the preference of alamethicin and melittin for pores of different shapes, using molecular dynamics (MD) simulations of the peptides in pre-formed toroidal and cylindrical pores. When an alamethicin hexamer is initially embedded in a cylindrical pore, at the end of the simulation the pore remains cylindrical or closes if glutamines in the N-termini are not located within the pore. On the other hand, when a melittin tetramer is embedded in toroidal pore or in a cylindrical pore, at the end of the simulation the pore is lined both with peptides and lipid headgroups, and, thus, can be classified as a toroidal pore. These observations agree with the prevailing views that alamethicin forms barrel-stave pores whereas melittin forms toroidal pores. Both alamethicin and melittin form amphiphilic helices in the presence of membranes, but their net charge differs; at pH ∼ 7, the net charge of alamethicin is − 1 whereas that of melittin is + 5. This gives rise to stronger electrostatic interactions of melittin with membranes than those of alamethicin. The melittin tetramer interacts more strongly with lipids in the toroidal pore than in the cylindrical one, due to more favorable electrostatic interactions.     

一组人工合成抗菌肽的研究

Cecropin A1是一种从惜古比天蚕(Hyalophora cecropia)中提取的由37个氨基酸组成的一种α-螺旋抗菌肽,其杀菌活性较弱。本文采用了cecropin A1的N端1-8序列KWKLFKKI,另加一段标准的α-螺旋结构序列,然后用一个铰链结构GIG相连,合成了15条抗菌肽。经过试验证明部分含有核心标准螺旋结构的序列,对革兰氏阳性菌和阴性菌的最小抑菌浓度仅是原有cecropin A1抗菌肽的1/100左右。该类抗菌肽有希望进一步开发为新的抗感染药物。该类抗菌肽已经申请专利,专利号为PCT/CN 03/00522。     

Antimicrobial peptides bind more strongly to membrane pores

Antimicrobial peptides (AMPs) are small, usually cationic peptides, which permeabilize bacterial membranes. Understanding their mechanism of action might help design better antibiotics. Using an implicit membrane model, modified to include pores of different shapes, we show that four AMPs (alamethicin, melittin, a magainin analogue, MG-H2, and piscidin 1) bind more strongly to membrane pores, consistent with the idea that they stabilize them. The effective energy of alamethicin in cylindrical pores is similar to that in toroidal pores, whereas the effective energy of the other three peptides is lower in toroidal pores. Only alamethicin intercalates into the membrane core; MG-H2, melittin and piscidin are located exclusively at the hydrophobic/hydrophilic interface. In toroidal pores, the latter three peptides often bind at the edge of the pore, and are in an oblique orientation. The calculated binding energies of the peptides are correlated with their hemolytic activities. We hypothesize that one distinguishing feature of AMPs may be the fact that they are imperfectly amphipathic which allows them to bind more strongly to toroidal pores. An initial test on a melittin-based mutant seems to support this hypothesis.     

The complete amino acid sequence of the pediocin-like antimicrobial peptide leucocin C

The pediocin-like antimicrobial peptide leucocin C produced by a strain of Leuconostoc mesenteroides has been purified using a recently developed rapid two-step procedure. The complete and corrected amino acid sequence of the peptide has been determined by Edman degradation of the intact peptide and a C-terminal fragment generated by cleavage with Asp-N endoprotease. Leucocin C contained 43 residues with the following sequence: KNYGNGVHCTKKGCSVDWGYAWTNIANNSVMNGLTGGNAGWHN. The molecular weight of leucocin C as determined by mass spectrometry was 4595, which is consistent with the theoretical molecular weight of 4596 calculated from the sequence. Moreover, the molecular weights of the two fragments generated by cleavage with Asp-N were also consistent with the determined sequence.     

Synthetic oligoureas of metaphenylenediamine mimic host defence peptides in their antimicrobial behaviour

Oligomeric ureas of m-phenylenediamine target anionic DMPG (dimyristoylphosphatidylglycerol) and possess promise as antimicrobial agents. Their similar size, shape and hydrophobicity to helical antimicrobial peptides (AMPs) may be important for activity to exist and the ability of these compounds to insert into a well ordered lipid environment.