In vivo therapeutic applications of cell spheroids

Spheroids are increasingly being employed to answer a wide range of clinical and biomedical inquiries ranging from pharmacology to disease pathophysiology, with the ultimate goal of using spheroids for tissue engineering and regeneration. When compared to traditional two-dimensional cell culture, spheroids have the advantage of better replicating the 3D extracellular microenvironment and its associated growth factors and signaling cascades. As knowledge about the preparation and maintenance of spheroids has improved, there has been a plethora of translational experiments investigating in vivo implantation of spheroids into various animal models studying tissue regeneration.We review methods for spheroid delivery and how they have been utilized in tissue engineering experiments. We break down efforts in this field by organ systems, discussing applications of spheroids to various animal models of disease processes and their potential clinical implications. These breakthroughs have been made possible by advancements in spheroid formation, in vivo delivery and assessment. There is unexplored potential and room for further research and development in spheroid-based tissue engineering approaches. Regenerative medicine and other clinical applications ensure this exciting area of research remains relevant for patient care.     

Melanin Transfer in Human 3D Skin Equivalents Generated Exclusively from Induced Pluripotent Stem Cells

The current utility of 3D skin equivalents is limited by the fact that existing models fail to recapitulate the cellular complexity of human skin. They often contain few cell types and no appendages, in part because many cells found in the skin are difficult to isolate from intact tissue and cannot be expanded in culture. Induced pluripotent stem cells (iPSCs) present an avenue by which we can overcome this issue due to their ability to be differentiated into multiple cell types in the body and their unlimited growth potential. We previously reported generation of the first human 3D skin equivalents from iPSC-derived fibroblasts and iPSC-derived keratinocytes, demonstrating that iPSCs can provide a foundation for modeling a complex human organ such as skin. Here, we have increased the complexity of this model by including additional iPSC-derived melanocytes. Epidermal melanocytes, which are largely responsible for skin pigmentation, represent the second most numerous cell type found in normal human epidermis and as such represent a logical next addition. We report efficient melanin production from iPSC-derived melanocytes and transfer within an entirely iPSC-derived epidermal-melanin unit and generation of the first functional human 3D skin equivalents made from iPSC-derived fibroblasts, keratinocytes and melanocytes.     

Advanced cell therapies with and without scaffolds

Tissue engineering and regenerative medicine aim to produce tissue substitutes to restore lost functions of tissues and organs. This includes cell therapies, induction of tissue/organ regeneration by biologically active molecules, or transplantation of in vitro grown tissues. This review article discusses advanced cell therapies that make use of scaffolds and scaffold-free approaches. The first part of this article covers the basic characteristics of scaffolds, including characteristics of scaffold material, fabrication and surface functionalization, and their applications in the construction of hard (bone and cartilage) and soft (nerve, skin, blood vessel, heart muscle) tissue substitutes. In addition, cell sources as well as bioreactive agents, such as growth factors, that guide cell functions are presented. The second part in turn, examines scaffold-free applications, with a focus on the recently discovered cell sheet engineering. This article serves as a good reference for all applications of advanced cell therapies and as well as advantages and limitations of scaffold-based and scaffold-free strategies.     

3D printed PLA-based scaffolds

Rapid prototyping (RP), also known as additive manufacturing (AM), has been well received and adopted in the biomedical field. The capacity of this family of techniques to fabricate customized 3D structures with complex geometries and excellent reproducibility has revolutionized implantology and regenerative medicine. In particular, nozzle-based systems allow the fabrication of high-resolution polylactic acid (PLA) structures that are of interest in regenerative medicine. These 3D structures find interesting applications in the regenerative medicine field where promising applications including biodegradable templates for tissue regeneration purposes, 3D in vitro platforms for studying cell response to different scaffolds conditions and for drug screening are considered among others. Scaffolds functionality depends not only on the fabrication technique, but also on the material used to build the 3D structure, the geometry and inner architecture of the structure, and the final surface properties. All being crucial parameters affecting scaffolds success. This Commentary emphasizes the importance of these parameters in scaffolds’ fabrication and also draws the attention toward the versatility of these PLA scaffolds as a potential tool in regenerative medicine and other medical fields.     

Three-dimensional cell culture systems as an in vitro platform for cancer and stem cell modeling

Three-dimensional(3 D) culture systems are becoming increasingly popular due to their ability to mimic tissue-like structures more effectively than the monolayer cultures. In cancer and stem cell research, the natural cell characteristics and architectures are closely mimicked by the 3 D cell models. Thus, the 3 D cell cultures are promising and suitable systems for various proposes, ranging from disease modeling to drug target identification as well as potential therapeutic substances that may transform our lives. This review provides a comprehensive compendium of recent advancements in culturing cells, in particular cancer and stem cells, using 3 D culture techniques. The major approaches highlighted here include cell spheroids, hydrogel embedding, bioreactors, scaffolds, and bioprinting. In addition, the progress of employing 3 D cell culture systems as a platform for cancer and stem cell research was addressed, and the prominent studies of 3 D cell culture systems were discussed.     

Artificial skin in perspective: concepts and applications

Skin, the largest organ of the human body, is organized into an elaborate layered structure consisting mainly of the outermost epidermis and the underlying dermis. A subcutaneous adipose-storing hypodermis layer and various appendages such as hair follicles, sweat glands, sebaceous glands, nerves, lymphatics, and blood vessels are also present in the skin. These multiple components of the skin ensure survival by carrying out critical functions such as protection, thermoregulation, excretion, absorption, metabolic functions, sensation, evaporation management, and aesthetics. The study of how these biological functions are performed is critical to our understanding of basic skin biology such as regulation of pigmentation and wound repair. Impairment of any of these functions may lead to pathogenic alterations, including skin cancers. Therefore, the development of genetically controlled and well characterized skin models can have important implications, not only for scientists and physicians, but also for manufacturers, consumers, governing regulatory boards and animal welfare organizations. As cells making up human skin tissue grow within an organized three-dimensional (3D) matrix surrounded by neighboring cells, standard monolayer (2D) cell cultures do not recapitulate the physiological architecture of the skin. Several types of human skin recombinants, also called artificial skin, that provide this critical 3D structure have now been reconstructed in vitro. This review contemplates the use of these organotypic skin models in different applications, including substitutes to animal testing.     

The application of renal cells in culture in studying drug-induced nephrotoxicity

Summary Kidney cells in culture represent one of many in vitro approaches for studying drug-induced nephrotoxicity. Pontential advantages of cell culture systems compared to more traditional in vitro models include a) the ability to examine direct effects at the cellular level, b) extended viability, c) ability for long-term storage, and d) capabilities for automation. Primary cultures of kidney tubules as well as cell lines of kidney origin are currently under evaluation as model systems for the assement of nephrotoxicity. The application of two renal cell systems, rabbit primary proximal tubule cultures and the pig kidney cell line, LLC-PK₁, in studying mechanisms of drug-induced nephrotoxicity is described in this communication. Potentially valuable insights intothe renal pathogenesis associated with the antitumor agent, cis-diamminedichloroplatium II, and the aminoglycoside antibiotic, gentamicin, have been obtained utilizing these renal cell models. Challenges in renal cll culture involve the characterization and mainternance of differentiated properties and the development of technologies to a) study bidirectional transport-toxicity of drugs, and b) provide a dynamic vs. static fluid environment as in vivo. Despite these unique challeges as well as the universal challeges involved in extrapolating any in vitro data to the in vivo situation, recent studies indicate that renal cells in culture are useful in the elucidation of mechanisms of drug-induced renal injury. This paper was presented at a Symposium on the Physiology and Toxicology of the Kidney In Vitro co-sponsored by The Society of Toxicology (SOT) and the Tissue Culture Association held at the 27th annual meeting of the SOT in Dallas, Texas in 1988.     

Skin tissue generation by laser cell printing

For the aim of ex vivo engineering of functional tissue substitutes, Laser-assisted BioPrinting (LaBP) is under investigation for the arrangement of living cells in predefined patterns. So far three-dimensional (3D) arrangements of single or two-dimensional (2D) patterning of different cell types have been presented. It has been shown that cells are not harmed by the printing procedure. We now demonstrate for the first time the 3D arrangement of vital cells by LaBP as multicellular grafts analogous to native archetype and the formation of tissue by these cells. For this purpose, fibroblasts and keratinocytes embedded in collagen were printed in 3D as a simple example for skin tissue. To study cell functions and tissue formation process in 3D, different characteristics, such as cell localisation and proliferation were investigated. We further analysed the formation of adhering and gap junctions, which are fundamental for tissue morphogenesis and cohesion. In this study, it was demonstrated that LaBP is an outstanding tool for the generation of multicellular 3D constructs mimicking tissue functions. These findings are promising for the realisation of 3D in vitro models and tissue substitutes for many applications in tissue engineering.     

From 3D cell culture to organs-on-chips

3D cell-culture models have recently garnered great attention because they often promote levels of cell differentiation and tissue organization not possible in conventional 2D culture systems. We review new advances in 3D culture that leverage microfabrication technologies from the microchip industry and microfluidics approaches to create cell-culture microenvironments that both support tissue differentiation and recapitulate the tissue-tissue interfaces, spatiotemporal chemical gradients, and mechanical microenvironments of living organs. These 'organs-on-chips' permit the study of human physiology in an organ-specific context, enable development of novel in vitro disease models, and could potentially serve as replacements for animals used in drug development and toxin testing.     

The famous versus the inconvenient - or the dawn and the rise of 3D-culture systems

One of the greatest impacts on in vitro cell biology was the introduction of three-dimensional (3D) culture systems more than six decades ago and this era may be called the dawn of 3D-tissue culture. Although the advantages were obvious, this field of research was a "sleeping beauty" until the 1970s when multicellular spheroids were discovered as ideal tumor models. With this rebirth, organotypical culture systems became valuable tools and this trend continues to increase. While in the beginning, simple approaches, such as aggregation culture techniques, were favored due to their simplicity and convenience, now more sophisticated systems are used and are still being developed. One of the boosts in the development of new culture techniques arises from elaborate manufacturing and surface modification techniques, especially micro and nano system technologies that have either improved dramatically or have evolved very recently. With the help of these tools, it will soon be possible to generate even more sophisticated and more organotypic-like culture systems. Since 3D perfused or superfused systems are much more complex to set up and maintain compared to use of petri dishes and culture flasks, the added value of 3D approaches still needs to be demonstrated.     

A bioreactor system for interfacial culture and physiological perfusion of vascularized tissue equivalents

A pivotal requirement for the generation of vascularized tissue equivalents is the development of culture systems that provide a physiological perfusion of the vasculature and tissue-specific culture conditions. Here, we present a bioreactor system that is suitable to culture vascularized tissue equivalents covered with culture media and at the air–medium interface, which is a vital stimulus for skin tissue. For the perfusion of the vascular system a new method was integrated into the bioreactor system that creates a physiological pulsatile medium flow between 80 and 120 mmHg to the arterial inflow of the equivalent's vascular system. Human dermal microvascular endothelial cells (hDMECs) were injected into the vascular system of a biological vascularized scaffold based on a decellularized porcine jejunal segment and cultured in the bioreactor system for 14 days. Histological analysis and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) staining revealed that the hDMECs were able to recolonize the perfused vascular structures and expressed endothelial cell specific markers such as platelet endothelial cell adhesion molecule and von Willebrand factor. These results indicate that our bioreactor system can serve as a platform technology to generate advanced bioartificial tissues with a functional vasculature for future clinical applications.     

Microfluidic culture models to study the hydrodynamics of tumor progression and therapeutic response

The integration of tissue engineering strategies with microfluidic technologies has enabled the design of in vitro microfluidic culture models that better adapt to morphological changes in tissue structure and function over time. These biomimetic microfluidic scaffolds accurately mimic native 3D microenvironments, as well as permit precise and simultaneous control of chemical gradients, hydrodynamic stresses, and cellular niches within the system. The recent application of microfluidic in vitro culture models to cancer research offers enormous potential to aid in the development of improved therapeutic strategies by supporting the investigation of tumor angiogenesis and metastasis under physiologically relevant flow conditions. The intrinsic material properties and fluid mechanics of microfluidic culture models enable high‐throughput anti‐cancer drug screening, permit well‐defined and controllable input parameters to monitor tumor cell response to various hydrodynamic conditions or treatment modalities, as well as provide a platform for elucidating fundamental mechanisms of tumor physiology. This review highlights recent developments and future applications of microfluidic culture models to study tumor progression and therapeutic targeting under conditions of hydrodynamic stress relevant to the complex tumor microenvironment. Biotechnol. Biotechnol. Bioeng. 2013; 110: 2063–2072. © 2013 Wiley Periodicals, Inc.     

Death in the third dimension: apoptosis regulation and tissue architecture

Tissue development, homeostasis and tumor pathogenesis all depend upon a complex dialogue between multiple cell types operating within a dynamic three-dimensional (3D) tissue extracellular matrix microenvironment. A major issue is whether the spatial organization of a cell within this 3D tissue microenvironment could modulate cell responsiveness to regulate cell fate decisions such as survival, and if so how. Classic developmental model systems and transgenic animals are instructive but pose special challenges for investigators conducting signaling studies and biochemical assays in tissues. As an alternative, 3D culture model systems exist in which cell-adhesion dependent tissue architecture, heterotypic cell-cell interactions and tissue differentiation can be recapitulated with good fidelity. 3D cell culture models are slowly revealing how tissue architecture can dramatically influence how a cell responds to exogenous stimuli to modify its apoptotic behavior and hence should prove instrumental for identifying novel cell death pathways.     

Native-mimicking in vitro microenvironment: an elusive and seductive future for tumor modeling and tissue engineering

Human connective tissues are complex physiological microenvironments favorable for optimal survival, function, growth, proliferation, differentiation, migration, and death of tissue cells. Mimicking native tissue microenvironment using various three-dimensional (3D) tissue culture systems in vitro has been explored for decades, with great advances being achieved recently at material, design and application levels. These achievements are based on improved understandings about the functionalities of various tissue cells, the biocompatibility and biodegradability of scaffolding materials, the biologically functional factors within native tissues, and the pathophysiological conditions of native tissue microenvironments. Here we discuss these continuously evolving physical aspects of tissue microenvironment important for human disease modeling, with a focus on tumors, as well as for tissue repair and regeneration. The combined information about human tissue spaces reflects the necessities of considerations when configuring spatial microenvironments in vitro with native fidelity to culture cells and regenerate tissues that are beyond the formats of 2D and 3D cultures. It is important to associate tissue-specific cells with specific tissues and microenvironments therein for a better understanding of human biology and disease conditions and for the development of novel approaches to treat human diseases.     

Rapid prototyping as a tool for manufacturing bioartificial livers

Rapid prototyping (RP) technologies are a set of manufacturing processes that can produce very complex structures directly from computer-aided design models without structure-specific tools or knowledge. These technologies might eventually enable the manufacture of human livers to create functional substitutes for treating liver failure or dysfunctionality. However, the approaches used currently face many challenges, such as the complex branched vascular and bile ductular systems and the variety of cell types, matrices and regulatory factors involved in liver development. Here, we discuss the challenges and provide evidence for the usefulness of RP in overcoming them.     

Mechanical, biochemical, and extracellular matrix effects on vascular smooth muscle cell phenotype.

The vascular smooth muscle cell (VSMC) is surrounded by a complex extracellular matrix that provides and modulates a variety of biochemical and mechanical cues that guide cell function. Conventional two-dimensional monolayer culture systems recreate only a portion of the cellular environment, and therefore there is increasing interest in developing more physiologically relevant three-dimensional culture systems. This review brings together recent studies on how mechanical, biochemical, and extracellular matrix stimulation can be applied to study VSMC function and how the combination of these factors leads to changes in phenotype. Particular emphasis is placed on in vitro experimental studies in which multiple stimuli are combined, especially in three-dimensional culture systems and in vascular tissue engineering applications. These studies have provided new insight into how VSMC phenotype is controlled, and they have underscored the interdependence of biochemical and mechanical signaling. Future improvements in creating more complex in vitro culture environments will lead to a better understanding of VSMC biology, new treatments for vascular disease, as well as improved blood vessel substitutes.     

Application of cell co-culture system to study fat and muscle cells

Animal cell culture is a highly complex process, in which cells are grown under specific conditions. The growth and development of these cells is a highly unnatural process in vitro condition. Cells are removed from animal tissues and artificially cultured in various culture vessels. Vitamins, minerals, and serum growth factors are supplied to maintain cell viability. Obtaining result homogeneity of in vitro and in vivo experiments is rare, because their structure and function are different. Living tissues have highly ordered complex architecture and are three-dimensional (3D) in structure. The interaction between adjacent cell types is quite distinct from the in vitro cell culture, which is usually two-dimensional (2D). Co-culture systems are studied to analyze the interactions between the two different cell types. The muscle and fat co-culture system is useful in addressing several questions related to muscle modeling, muscle degeneration, apoptosis, and muscle regeneration. Co-culture of C2C12 and 3T3-L1 cells could be a useful diagnostic tool to understand the muscle and fat formation in animals. Even though, co-culture systems have certain limitations, they provide a more realistic 3D view and information than the individual cell culture system. It is suggested that co-culture systems are useful in evaluating the intercellular communication and composition of two different cell types.     

Not your father's planarian: a classic model enters the era of functional genomics

Freshwater planarians were a classic model for studying the problems of development and regeneration. However, as attention shifted towards animals with more rigid developmental processes, the planarians, with their notoriously plastic ontogeny, declined in significance as a model system. This trend was exacerbated with the introduction of genetic and molecular approaches, which did not work well in planarians. More recently, the heightened interest in stem-cell biology, along with the successful application of molecular, cellular and genomic approaches in planarians, is re-establishing these fascinating organisms as models for studying regeneration and developmental plasticity.     

A scaffold-free in vitro model for osteogenesis of human mesenchymal stem cells

For studying cellular processes three-dimensional (3D) in vitro models are of a high importance. For tissue engineering approaches osseous differentiation is performed on 3D scaffolds, but material depending influences promote cellular processes like adhesion, proliferation and differentiation. To investigate developmental processes of mesenchymal stem cells without cell-substrate interactions, self-contained in vitro models mimicking physiological condition are required. However, with respect to scientific investigations and pharmaceutical tests, it is essential that these tissue models are well characterised and are of a high reproducibility. In order to establish an appropriate in vitro model for bone formation, different protocols are compared and optimised regarding their aggregate formation efficiency, homogeneity of the aggregates, the viability and their ability to induce differentiation into the osteogenic lineage. The protocols for the generation of 3D cell models are based on rotation culture, hanging drop technique, and the cultivation in non adhesive culture vessels (single vessels as well as 96 well plates). To conclude, the cultivation of hMSCs in 96 well non adhesive plates facilitates an easy way to cultivate homogenous cellular aggregates with high performance efficiency in parallel. The size can be controlled by the initial cell density per well and within this spheroids, bone formation has been induced.