Structural features in the NH2-terminal region of a model eukaryotic signal peptide influence the site of its cleavage by signal peptidase

The 20-amino acid signal peptide of human pre (delta pro)apolipoprotein A-II contains the tripartite domain structure typical of eukaryotic prepeptides, i.e. a positively charged NH2-terminal (n) region, a hydrophobic core (h) region, and a COOH-terminal polar domain (c region). This signal sequence has multiple potential sites for cotranslational processing making it an attractive model for assessing the consequences of systematic structural alterations on the site selected for signal peptidase cleavage. We previously analyzed 40 mutant derivatives of this model preprotein using an in vitro translation/canine microsome processing assay. The results showed that the position of the boundary between the h and c regions and properties of the -1 residue are critical in defining the site of cotranslational cleavage. To investigate whether structural features in the NH2-terminal region of signal peptides play a role in cleavage specificity, we have now inserted various amino acids between the positively charged n region (NH2-Met-Lys) and the h region of a "parental" pre(delta pro)apoA-II mutant that has roughly equal cleavage between Gly18 decreases and Gly20 decreases. Movement of the n/h boundary toward the NH2 terminus results in a dramatic shift in cleavage to Gly18 decreases. Replacement of the Lys2 residue with hydrophilic, negatively charged residues preserves the original sites of cleavage. Replacement with a hydrophobic residue causes cleavage to shift "upstream." Simultaneous alteration of the position of n/h and h/c boundaries has an additive effect on the site of signal peptidase cleavage. None of these mutations produced a marked decrease in the efficiency of in vitro cotranslational translocation or cleavage. However, in sequence contexts having poor signal function, introduction of hydrophobic residues between the n and h regions markedly improved the efficiency of translocation/processing. We conclude that the position of the n/h boundary as well as positioning of the h/c boundary affects the site of cleavage chosen by signal peptidase.     

A putative signal peptidase recognition site and sequence in eukaryotic and prokaryotic signal peptides

Presecretory signal peptides of 39 proteins from diverse prokaryotic and eukaryotic sources have been compared. Although varying in length and amino acid composition, the labile peptides share a hydrophobic core of approximately 12 amino acids. A positively charged residue (Lys or Arg) usually precedes the hydrophobic core. Core termination is defined by the occurrence of a charged residue, a sequence of residues which may induce a beta-turn in a polypeptide, or an interruption in potential alpha-helix or beta-extended strand structure. The hydrophobic cores contain, by weight average, 37% Leu: 15% Ala: 10% Val: 10% Phe: 7% Ile plus 21% other hydrophobic amino acids arranged in a non-random sequence. Following the hydrophobic cores (aligned by their last residue) a highly non-random and localized distribution of Ala is apparent within the initial eight positions following the core: (formula; see text) Coincident with this observation, Ala-X-Ala is the most frequent sequence preceding signal peptidase cleavage. We propose the existence of a signal peptidase recognition sequence A-X-B with the preferred cleavage site located after the sixth amino acid following the core sequence. Twenty-two of the above 27 underlined Ala residues would participate as A or B in peptidase cleavage. Position A includes the larger aliphatic amino acids, Leu, Val and Ile, as well as the residues already found at B (principally Ala, Gly and Ser). Since a preferred cleavage site can be discerned from carboxyl and not amino terminal alignment of the hydrophobic cores it is proposed that the carboxyl ends are oriented inward toward the lumen of the endoplasmic reticulum where cleavage is thought to occur. This orientation coupled with the predicted beta-turn typically found between the core and the cleavage site implies reverse hairpin insertion of the signal sequence. The structural features which we describe should help identify signal peptides and cleavage sites in presumptive amino acid sequences derived from DNA sequences.     

Selection of functional signal peptide cleavage sites from a library of random sequences.

The export of proteins to the periplasmic compartment of bacterial cells is mediated by an amino-terminal signal peptide. After transport, the signal peptide is cleaved by a processing enzyme, signal peptidase I. A comparison of the cleavage sites of many exported proteins has identified a conserved feature of small, uncharged amino acids at positions -1 and -3 relative to the cleavage site. To determine experimentally the sequences required for efficient signal peptide cleavage, we simultaneously randomized the amino acid residues from positions -4 to +2 of the TEM-1 beta-lactamase enzyme to form a library of random sequences. Mutants that provide wild-type levels of ampicillin resistance were then selected from the random-sequence library. The sequences of 15 mutants indicated a bias towards small amino acids. The N-terminal amino acid sequence of the mature enzyme was determined for nine of the mutants to assign the new -1 and -3 residues. Alanine was present in the -1 position for all nine of these mutants, strongly supporting the importance of alanine at the -1 position. The amino acids at the -3 position were much less conserved but were consistent with the -3 rules derived from sequence comparisons. Compared with the wild type, two of the nine mutants have an altered cleavage position, suggesting that sequence is more important than position for processing of the signal peptide.     

Synthetic substrate for eukaryotic signal peptidase. Cleavage of a synthetic peptide analog of the precursor region of preproparathyroid hormone

A synthetic peptide analog of the precursor region of preproparathyroid hormone has been shown to be a specific substrate for hen oviduct signal peptidase. The sequence of the 31-residue peptide is Ser-Ala-Lys-Asp-norleucine (Nle)-Val-Lys-Val-Nle-Ile-Val-Nle-Leu-Ala-Ile-Ala-Phe-Leu-Ala-Arg-Ser-As p-Gly-Lys-Ser-Val-Lys-Lys-Arg-D-Tyr-amide (Caulfield, M. P., Duong, L. T., O'Brien, R., Majzoub, J. A., and Rosenblatt, M. (1988) Mol. Endocrinol. 2, 452-458). This sulfur-free signal peptide analog can be labeled with 125I on the C-terminal D-tyrosine and is cleaved by purified hen oviduct signal peptidase between Gly and Lys, the correct site of cleavage of preproparathyroid hormone in vivo. Amino acid sequence analysis of the cleavage product released 125I at the seventh cycle of Edman degradation, confirming that enzymatic cleavage occurs at the physiological site. Synthetic peptide analogs of the substrate with Lys, Pro, or Asp substituted for Nle-18 were poor substrates for the enzyme and were also poor competitive inhibitors of catalysis, suggesting that modifications at position -18, 12 amino acids from the site of cleavage, directly influence binding by the enzyme. Analysis of the reactivity of signal peptidase with these synthetic peptides provides insight into the cleavage specificity requirements of this eukaryotic signal peptidase.     

Identification of amino acids in the leader peptide of Methanococcus voltae preflagellin that are important in posttranslational processing

Archaeal flagellins are made initially as preproteins with short, positively charged leader peptides. Analysis of all available archaeal preflagellin sequences indicates that the -1 position is always held by a glycine while the -2 and -3 positions are almost always held by charged amino acids. To evaluate the importance of these and other amino acids in the leader peptides of archaeal flagellins for processing by a peptidase, Methanococcus voltae mutant FlaB2 preflagellin genes were generated by PCR and the proteins tested in a methanogen preflagellin peptidase assay that detects the removal of the leader peptide from preflagellin. When the -1 position was changed from glycine to other amino acids tested, no cleavage was observed by the peptidase, with the exception of a change to alanine at which poor, partial processing was observed. Amino acid substitutions at the -2 lysine position resulted in a complete loss of processing by the peptidase, while changes at the -3 lysine resulted in partial processing. A mutant preflagellin with a leader peptide shortened from 12 amino acids to 6 amino acids was not processed. When the invariant glycine residue present at position +3 was changed to a valine, no processing of this mutant preflagellin was observed. The identification of critical amino acids in FlaB2 required for proper processing suggests that a specific preflagellin peptidase may cleave archaeal flagellins by recognition of a conserved sequence of amino acids.     

An alternate pathway for the processing of the prolipoprotein signal peptide in Escherichia coli

Previous studies showed that when the signal sequence plus 9 amino acid residues from the amino terminus of the major lipoprotein of Escherichia coli was fused to beta-lactamase, the resulting hybrid protein was modified, proteolytically processed, and assembled into the outer membrane as was the wild-type lipoprotein (Ghrayeb, J., and Inouye, M. (1983) J. Biol. Chem. 259, 463-467). We have constructed several hybrid proteins with mutations at the cleavage site of the prolipoprotein signal peptide. These mutations are known to block the lipid modification of the lipoprotein at the cysteine residue, resulting in the accumulation of unprocessed, unmodified prolipoprotein in the outer membrane. The mutations blocked the lipid modification of the hybrid protein. However, in contrast to the mutant lipoproteins, the cleavage of the signal peptides for the mutant hybrid proteins did occur, although less efficiently than the unaltered prolipo-beta-lactamase. The mutant prolipo-beta-lactamase proteins were cleaved at a site 5 amino acid residues downstream of the prolipoprotein signal peptide cleavage site. This new cleavage between alanine and lysine residues was resistant to globomycin, a specific inhibitor for signal peptidase II. This indicates that signal peptidase II, the signal peptidase which cleaves the unaltered prolipo-beta-lactamase, is not responsible for the new cleavage. The results demonstrate that the cleavage of the signal peptide is a flexible process that can occur by an alternative pathway when the normal processing pathway is blocked.     

Maturation of Escherichia coli maltose-binding protein by signal peptidase I in vivo. Sequence requirements for efficient processing and demonstration of an alternate cleavage site

Comparative analyses of a number of secretory proteins processed by eukaryotic and prokaryotic signal peptidases have identified a strongly conserved feature regarding the residues positioned -3 and -1 relative to the cleavage site. These 2 residues of the signal peptide are thought to constitute a recognition site for the processing enzyme and are usually amino acids with small, neutral side chains. It was shown previously that the substitution of aspartic acid for alanine at -3 of the Escherichia coli maltose-binding protein (MBP) signal peptide blocked maturation by signal peptidase I but had no noticeable effect or MBP translocation across the cytoplasmic membrane of its biological activity. This identified an excellent system in which to undertake a detailed investigation of the structural requirements and limitations for the cleavage site. In vitro mutagenesis was used to generate 14 different amino acid substitutions at -3 and 13 different amino acid substitutions at -1 of the MBP signal peptide. The maturation of the mutant precursor species expressed in vivo was examined. Overall, the results obtained agreed fairly well with statistically derived models of signal peptidase I specificity, except that cysteine was found to permit efficient processing when present at either -3 and -1, and threonine at -1 resulted in inefficient processing. Interestingly, it was found that substitutions at -1 which blocked processing at the normal cleavage site redirected processing, with varying efficiencies, to an alternate site in the signal peptide represented by the Ala-X-Ala sequence at positions -5 to -3. The substitution of aspartic acid for alanine at -5 blocked processing at this alternate site but not the normal site. The amino acids occupying the -5 and -3 positions in many other prokaryotic signal peptides also have the potential for constituting alternate processing sites. This appears to represent another example of redundant information contained within the signal peptide.     

Export of unprocessed precursor maltose-binding protein to the periplasm of Escherichia coli cells.

The Escherichia coli maltose-binding protein (MBP) R2 signal peptide is a truncated version of the wild-type structure that still facilitates very efficient export of MBP to the periplasm. Among single amino acid substitutions in the R2 signal peptide resulting in an export-defective precursor MBP (pMBP) were two that replaced residues in the consensus Ala-X-Ala sequence (residues -3 to -1) that immediately precedes the cleavage site. It was suggested that the functional hydrophobic core and signal peptidase recognition sequence of this signal peptide substantially overlap and that these two alterations affect both pMBP translocation and processing. In this study, the export of pMBP by the mutants, designated CC15 and CC17, with these two alterations was investigated further. The pMBP of mutant CC17 has an Arg substituted for Leu at the -2 position. It was found that CC17 cells exported only a very small amount of MBP, but that which was exported appeared to be correctly processed. This result was consistent with other studies that have concluded that virtually any amino acid can occupy the -2 position. For mutant CC15, which exhibits a fully Mal+ phenotype, an Asp is substituted for the Ala at the -3 position. CC15 cells were found to export large quantities of unprocessed, soluble pMBP to the periplasm, although such export was achieved in a relatively slow, posttranslational manner. This result was also consistent with other studies that suggested that charged residues are normally excluded from the -3 position of the cleavage site. Using in vitro oligonucleotide-directed mutagenesis, we constructed a new signal sequence mutant in which Asp was substituted for Arg at the -3 position of an otherwise wild-type MBP signal peptide. This alteration had no apparent effect on pMBP translocation across the cytoplasmic membrane, but processing by signal peptidase was inhibited. This pMBP species with its full-length hydrophobic core remained anchored to the membrane, where it could still participate in maltose uptake. The implications of these results for models of protein export are discussed.     

Recognition of mitochondrial protein precursor lacking arginine at position -2 by mitochondrial processing peptidase: processing of bovine cytochrome P450(SCC) precursor

Mitochondrial processing peptidase (MPP) specifically cleaves off the N-terminal presequence of the mitochondrial protein precursor. Previous studies demonstrated that Arg at position -2 from the cleavage site, which is found among many precursors, plays a critical role in recognition by MPP. We analyzed the structural elements of bovine cytochrome P450 side-chain cleavage enzyme precursor [pre-P450(SCC)], which has Ala at position -2, for recognition by MPP. Replacement of Ala position -2 of pre-P450(SCC) with Arg resulted in an increase in the cleavage rate. Replacement with Gly caused a reduction in the cleavage rate and the appearance of an additional cleavage site downstream of the authentic site. A pre-P450(SCC) mutant with Met at position -2 retained cleavage efficiency equal to that of the wild type. These results indicate that -2 Ala of pre-P450(SCC) is recognized by MPP as a determinant for precise cleavage, and that the amino acid at -2 is required to have a straight methylene chain for interaction with the S(2) site. The preference for distal basic residues, a hydrophobic residue at +1, and hydroxyl residues at +2 and +3, was almost the same as those of the precursors with Arg at -2, indicating that the recognition mechanism of pre-P450(SCC) by MPP is essentially the same as that of the precursors with Arg at position -2.     

Use of site-directed mutagenesis to define the limits of sequence variation tolerated for processing of the M13 procoat protein by the Escherichia coli leader peptidase.

Leader peptidase cleaves the leader sequence from the amino terminus of newly made membrane and secreted proteins after they have translocated across the membrane. Analysis of a large number of leader sequences has shown that there is a characteristic pattern of small apolar residues at -1 and -3 (with respect to the cleavage site) and a helix-breaking residue adjacent to the central apolar core in the region -4 to -6. The conserved sequence pattern of small amino acids at -1 and -3 around the cleavage site most likely represents the substrate specificity of leader peptidase. We have tested this by generating 60 different mutations in the +1 to -6 domain of the M13 procoat protein. These mutants were analyzed for in vivo and in vitro processing, as well as for protein insertion into the cytoplasmic membrane. We find that in vivo leader peptidase was able to process procoat with an alanine, a serine, a glycine, or a proline residue at -1 and with a serine, a glycine, a threonine, a valine, or a leucine residue at -3. All other alterations at these sites were not processed, in accordance with predictions based on the conserved features of leader peptides. Except for proline and threonine at +1, all other residues at this position were processed by leader peptidase. None of the mutations at -2, -4, or -5 of procoat (apart from proline at -4) completely abolished leader peptidase cleavage in vivo although there were large effects on the kinetics of processing.(ABSTRACT TRUNCATED AT 250 WORDS)     

Intramembrane proteolysis and endoplasmic reticulum retention of hepatitis C virus core protein

Hepatitis C virus (HCV) core protein is suggested to localize to the endoplasmic reticulum (ER) through a C-terminal hydrophobic region that acts as a membrane anchor for core protein and as a signal sequence for E1 protein. The signal sequence of core protein is further processed by signal peptide peptidase (SPP). We examined the regions of core protein responsible for ER retention and processing by SPP. Analysis of the intracellular localization of deletion mutants of HCV core protein revealed that not only the C-terminal signal-anchor sequence but also an upstream hydrophobic region from amino acid 128 to 151 is required for ER retention of core protein. Precise mutation analyses indicated that replacement of Leu(139), Val(140), and Leu(144) of core protein by Ala inhibited processing by SPP, but cleavage at the core-E1 junction by signal peptidase was maintained. Additionally, the processed E1 protein was translocated into the ER and glycosylated with high-mannose oligosaccharides. Core protein derived from the mutants was translocated into the nucleus in spite of the presence of the unprocessed C-terminal signal-anchor sequence. Although the direct association of core protein with a wild-type SPP was not observed, expression of a loss-of-function SPP mutant inhibited cleavage of the signal sequence by SPP and coimmunoprecipitation with unprocessed core protein. These results indicate that Leu(139), Val(140), and Leu(144) in core protein play crucial roles in the ER retention and SPP cleavage of HCV core protein.     

Two rat surfactant protein A isoforms arise by a novel mechanism that includes alternative translation initiation

A single gene for rat surfactant protein A (SP-A) encodes two isoforms that are distinguished by an isoleucine-lysine-cysteine (IKC) N-terminal extension (SP-A and IKC-SP-A). Available evidence suggests that the variants are generated by alternative signal peptidase cleavage of the nascent polypeptide at a primary site (Cys(-)(1)-Asn(1)) and a secondary site (Gly(-)(4)-Ile(-)(3)). In this study, we used site-directed mutagenesis and heterologous expression in vitro and in insect cells to the examine mechanisms that may lead to alternative signal peptidase cleavage including alternative translation initiation at two in-frame AUGs (Met(-)(30) and Met(-)(20)), a suboptimal context for hydrolysis at the primary cleavage site, or cotranslational protein modifications that expose an otherwise cryptic secondary cleavage site. In vitro translation of a rat cDNA for SP-A resulted in both 28 and 29 kDa primary translation products on SDS-PAGE analysis, while translation of cDNAs encoding Met-30Ala and Met-20Ala mutations resulted in only the single 28 and 29 kDa molecular mass species, respectively. These data are consistent with translation initiation at both Met(-)(30) and Met(-)(20) during in vitro synthesis of SP-A. The Met-30Ala mutation reduced expression of the longer isoform in insect cells, indicating that the Met(-)(30) site also contributes to eucaryotic protein expression. Forcing translation initiation at Met(-)(30) by optimizing the Kozak consensus sequence surrounding that codon or by mutating the Met(-)(20) codon resulted in preferential expression of the longer SP-A isoform but reduced overall expression of the protein almost 10-fold. Both isoforms were generated to some degree whether translation was initiated at the codon for Met(-)(30) or Met(-)(20), indicating that the site of translation initiation is not the sole determinant of isoform generation and suggesting that either the context of the primary cleavage site is suboptimal or that cotranslational modifications affect cleavage. Preventing N-terminal glycosylation at Asn(1) did not affect the site of signal peptidase cleavage. Disruption of interchain disulfide formation at Cys(-)(1) by substitution with serine markedly enhanced cleavage at the Gly(-)(4)-Ile(-)(3) bond, but substitution with alanine enhanced cleavage at the Cys(-)(1)-Asn(1) bond. We conclude that rat SP-A isoforms arise by a novel mechanism that includes both alternative translation initiation at two in-frame AUGs and a suboptimal context for signal peptidase hydrolysis at the primary cleavage site.     

Carboxypeptidase yscS: gene structure and function of the vacuolar enzyme

The gene encoding carboxypeptidase yscS in Saccharomyces cerevisiae, CPS1, was cloned by complementation of the cps1-3 mutation. The cloned CPS1 gene, which again enabled a leucine auxotrophic cps1-3 mutant to grow on the modified dipeptide Cbz-Gly-Leu (Cbz, benzyloxycarbonyl) as sole leucine source, was sequenced and found to consist of an open reading frame of 1728 bp encoding a protein of 576 amino acids. The putative protein contains a hydrophobic stretch of 20 amino acids and a putative signal sequence cleavage site. Five putative N-glycosylation sites are also in the protein sequence. This data is consistent with the previous finding of carboxypeptidase yscS being a vacuolar peptidase. Chromosomal disruption of the CPS1 gene completely abolishes carboxypeptidase yscS activity. This protein is yet another member of the peptidases in S. cerevisiae involved in nitrogen metabolism.     

Signal peptides having standard and nonstandard cleavage sites can be processed by Imp1p of the mitochondrial inner membrane protease

We have performed a site-directed mutagenesis study showing that residues comprising the type I signal peptidase signature in the two catalytic subunits of the yeast inner membrane protease, Imp1p and Imp2p, are functionally important, consistent with the idea that these subunits contain a serine/lysine catalytic dyad. Previous studies have shown that Imp1p cleaves signal peptides having asparagine at the -1 position, which deviates from the typical signal peptide possessing a small uncharged amino acid at this position. To determine whether asparagine is responsible for the nonoverlapping substrate specificities exhibited by the inner membrane protease subunits, we have substituted asparagine with 19 amino acids in the Imp1p substrate i-cytochrome (cyt) b(2). The resulting signal peptides containing alanine, serine, cysteine, leucine, and methionine can be cleaved efficiently by Imp1p. The remaining mutant signal peptides are cleaved inefficiently or not at all. Surprisingly, none of the amino acid changes results in the recognition of i-cyt b(2) by Imp2p, whose natural substrate, i-cyt c(1), has alanine at the -1 position. The data demonstrate that (i) although the -1 residue is important in substrates recognized by Imp1p, signal peptides having standard and nonstandard cleavage sites can be processed by Imp1p, and (ii) a -1 asparagine does not govern the substrate specificity of the inner membrane protease subunits.     

Functional analysis of the signal-sequence processing site of yeast acid phosphatase

A systematic study of the signal peptidase cleavage site of the main cell-wall-repressible Saccharomyces cerevisiae acid phosphatase encoded by the PHO5 gene is presented. The last amino acid of the signal sequence, the chromosomally encoded alanine of the wild-type gene, was changed by any of 19 other amino acids in the chromosomal DNA by using in vitro mutagenesis in Escherichia coli and the technique of gene replacement. Processing and secretion are normal when the amino acid at this position is a small neutral amino acid, i.e. alanine, glycine, cysteine, serine or threonine. Processing glycosylation, and secretion of regulated acid phosphatase are distinctly affected with other amino acid substitutions and core-glycosylated protein accumulates in the cell. Surprisingly, PHO5 protein is still secreted to the cell wall and into the growth medium but at a lower rate and without cleavage of the signal sequence. The same features are exhibited by a mutated acid phosphatase with a deletion of four amino acids at the end of the signal peptide (-7 to -4 relative to the processing site) thus preserving the important -3 to -1 region.     

Molecular cloning of a new human insulin-like growth factor binding protein.

We have cloned a new insulin-like growth factor's binding protein (IGFBP) from a human osteosarcoma cDNA library. Two conserved regions in the COOH-terminal third of the five known human IGFBPs were used to design primers and to perform polymerase chain reaction (PCR) with osteosarcoma cDNA as a template. One of the eight PCR products encoded a unique IGFBP sequence. The DNA sequence was used to synthesize probes to screen an osteosarcoma cDNA library and isolate full length cDNA clones. The amino acid sequence was deduced from one of them. It contains two possible signal peptidase cleavage sites yielding a mature molecule of 257 or 252 amino acids, and 18 cysteines in identical positions to the other IGFBPs. The most pronounced homology exists with human IGFBP-3 (50% in the NH2- and 45% in the COOH-terminal region).