Effects of a shoulder injury prevention strength training program on eccentric external rotator muscle strength and glenohumeral joint imbalance in female overhead activity athletes

Imbalance of the eccentrically-activated external rotator cuff muscles versus the concentrically-activated internal rotator cuff muscles is a primary risk factor for glenohumeral joint injuries in overhead activity athletes. Nonisokinetic dynamometer based strength training studies, however, have focused exclusively on resulting concentric instead of applicable eccentric strength gains of the external rotator cuff muscles. Furthermore, previous strength training studies did not result in a reduction in glenoumeral joint muscle imbalance, thereby suggesting that currently used shoulder strength training programs do not effectively reduce the risk of shoulder injury to the overhead activity athlete. Two collegiate women tennis teams, consisting of 12 women, participated in this study throughout their preseason training. One team (n = 6) participated in a 5-week, 4 times a week, external shoulder rotator muscle strength training program next to their preseason tennis training. The other team (n = 6) participated in a comparable preseason tennis training program, but did not conduct any upper body strength training. Effects of this strength training program were evaluated by comparing pre- and posttraining data of 5 maximal eccentric external immediately followed by concentric internal contractions on a Kin-Com isokinetic dynamometer (Chattecx Corp., Hixson, Tennessee). Overall, the shoulder strength training program significantly increased eccentric external total work without significant effects on concentric internal total work, concentric internal mean peak force, or eccentric external mean peak force. In conclusion, by increasing the eccentric external total exercise capacity without a subsequent increase in the concentric internal total exercise capacity, this strength training program potentially decreases shoulder rotator muscle imbalances and the risk for shoulder injuries to overhead activity athletes.     

Measuring dynamic in-vivo glenohumeral joint kinematics: technique and preliminary results

Rotator cuff tears are a common injury that affect a significant percentage of the population over age 60. Although it is widely believed that the rotator cuff's primary function is to stabilize the humerus against the glenoid during shoulder motion, accurately measuring the three-dimensional (3D) motion of the shoulder's glenohumeral joint under in-vivo conditions has been a challenging endeavor. In particular, conventional motion measurement techniques have frequently been limited to static or two-dimensional (2D) analyses, and have suffered from limited or unknown in-vivo accuracy. We have recently developed and validated a new model-based tracking technique that is capable of accurately measuring the 3D position and orientation of the scapula and humerus from biplane X-ray images. Herein we demonstrate the in-vivo application of this technique for accurately measuring glenohumeral joint translations during shoulder motion in the repaired and contralateral shoulders of patients following rotator cuff repair. Five male subjects were tested at 3-4 months following arthroscopic rotator cuff repair. Superior-inferior humeral translation was measured during elevation, and anterior-posterior humeral translation was measured during external rotation in both the repaired and contralateral shoulders. The data failed to detect statistically significant differences between the repaired and contralateral shoulders in superior-inferior translation (p=0.74) or anterior-posterior translation (p=0.77). The measurement technique overcomes the limitations of conventional motion measurement techniques by providing accurate, 3D, in-vivo measures of glenohumeral joint motion during dynamic activities. On-going research is using this technique to assess the effects of conservative and surgical treatment of rotator cuff tears.     

Anatomical glenohumeral internal rotation deficit and symmetric rotational strength in male and female young beach volleyball players

Beach volleyball is a sport with a high demand of shoulder structures that may lead to adaptations in range of motion (ROM) and strength like in other overhead sports. Despite of these possible alterations, no study evaluated the shoulder adaptations in young beach volleyball athletes. The aim of this study was to compare the bilateral ROM and rotation strength in the shoulders of young beach volleyball players. Goniometric passive shoulder ROM of motion and isometric rotational strength were evaluated in 19 male and 14 female asymptomatic athletes. External and internal ROM, total rotation motion, glenohumeral internal rotation deficit (GIRD), external rotation and internal rotation strength, bilateral deficits and external rotation to internal rotation ratio were measured. The statistical analysis included paired Student’s t-test and analysis of variance with repeated measures. Significantly lower dominant GIRD was found in both groups (p < 0.05), but only 6 athletes presented pathological GIRD. For strength variables, no significant differences for external or internal rotation were evident. Young beach volleyball athletes present symmetric rotational strength and shoulder ROM rotational adaptations that can be considered as anatomical. These results indicate that young practitioners of beach volleyball are subject to moderate adaptations compared to those reported for other overhead sports.     

Overload and neovascularization of shoulder tendons in volleyball players

ABSTRACT: BACKGROUND: In overhead sports like volleyball, the onset of a rotator cuff tendinopathy due to functional overload is a common observation. An angiofibroblastic etiopathogenesis has been hypothesized, whereby a greater anaerobic metabolism occurs in critical zones of the tendon with a lower degree of vascularization; this would induce collagen and extracellular matrix degradation, that could then trigger a compensatory neovascularization response. We performed a clinical observational study of 80 elite volleyball players, monitoring the perfusion values of the rotator cuff tendons by oximetry. RESULTS: No statistically significant differences were found between the oximetry data and age, sex or years of sports activity, nor when comparing the right and left arm or the dominant and non-dominant arm. A statistically significant difference was found for the dominant arm values in relation to the competitive role, higher values being obtained in outside hitters (62.7%) middle hitters (53.7%), opposite hitters (55.5%) and libero players (54.4%) (p<0.05), whereas there was no difference in players with the role of setter (56.2%) (p>0.05). CONCLUSIONS: The different tendon vascularization values found in players with different roles in the team may be attributed to a response to the specific biomechanical demands posed by the different overhead throwing roles.     

Shoulder muscle activity during pushing, pulling, elevation and overhead throw.

PURPOSE: The aim of this study was to compare the muscle activity of recreational athletes and professional javelin throwers during pull, push, and elevation of upper extremities and during overhead throw. SCOPE: Nine professional javelin throwers and 16 recreational athletes without shoulder problems were studied. Signals were recorded by surface EMG from eight different muscles. The results obtained from the muscles of upper extremities of throwers were compared with those of recreational athletes. CONCLUSION: The different neuromuscular control of professional throwers caused a more profitable muscle activity. Differences during the overhead throw were more significant. The deltoid muscle and rotator cuff of recreational athletes showed stronger activity than those of throwers during pull, push and elevation. The deltoid muscle and the rotator cuff of professional throwers showed stronger activity during overhead throw. Studying the detailed characteristics of muscle activity pattern (differences in length of activity periods, MVC% of muscles and time broadness among peak muscle activities in percent of total time of a movement cycle) may provide a basis for better understanding improved performance and help in planning proper rehabilitation protocol.     

Recent advances in shoulder research

Shoulder pathology is a growing concern for the aging population, athletes, and laborers. Shoulder osteoarthritis and rotator cuff disease represent the two most common disorders of the shoulder leading to pain, disability, and degeneration. While research in cartilage regeneration has not yet been translated clinically, the field of shoulder arthroplasty has advanced to the point that joint replacement is an excellent and viable option for a number of pathologic conditions in the shoulder. Rotator cuff disease has been a significant focus of research activity in recent years, as clinicians face the challenge of poor tendon healing and irreversible changes associated with rotator cuff arthropathy. Future treatment modalities involving biologics and tissue engineering hold further promise to improve outcomes for patients suffering from shoulder pathologies.     

Adaptations to humeral torsion in medieval Britain

Adaptations to the humeral torsion angle have been identified in the professional throwing athlete. This movement pattern increases the humeral torsion angle, and also increases the extent of external rotation movements in the dominant, throwing limb when compared with the nondominant limb. The purpose of this paper is to test the hypothesis that the humeral torsion angle is an adaptation to upper limb use. This project examines the humeral torsion angle in a number of medieval British populations, as well as a modern cadaver-based sample. The results identify significant differences in the humeral torsion angle both between and within male (P < 0.001, ANOVA) and female (P < 0.014, ANOVA) populations, although the results are not consistent with expected behavior patterns. Statistically significant differences between males and females within the same site were identified in 2 of the 5 samples examined. The mean level of bilateral asymmetry does not approach that reported for the professional throwing athlete. However, a number of individuals have high levels of asymmetry in excess of that identified in the professional throwing athlete. This analysis demonstrates the need for individual rather than population-based analyses, as the heterogeneity within population samples obscures individual variation in activity patterns. The diversity within British medieval society and a lack of specific known behaviors prevent further identification of the functional significance of the humeral torsion angle within the archaeological record examined here.     

Effects of rotator cuff tears on muscle moment arms: a computational study

Rotator cuff tears cause morphologic changes to cuff tendons and muscles, which can alter muscle architecture and moment arm. The effects of these alterations on shoulder mechanical performance in terms of muscle force and joint strength are not well understood. The purpose of this study was to develop a three-dimensional explicit finite element model for investigating morphological changes to rotator cuff tendons following cuff tear. The subsequent objectives were to validate the model by comparing model-predicted moment arms to empirical data, and to use the model to investigate the hypothesis that rotator cuff muscle moment arms are reduced when tendons are divided along the force-bearing direction of the tendon. The model was constructed by extracting tendon, cartilage, and bone geometry from the male Visible Human data set. Infraspinatus and teres minor muscle and tendon paths were identified relative to the humerus and scapula. Kinetic and kinematic boundary conditions in the model replicated experimental protocols, which rotated the humerus from 45 degrees internal to 45 degrees external rotation with constant loads on the tendons. External rotation moment arms were calculated for two conditions of the cuff tendons: intact normal and divided tendon. Predicted moment arms were within the 1-99% confidence intervals of experimental data for nearly all joint angles and tendon sub-regions. In agreement with the experimental findings, when compared to the intact condition, predicted moment arms were reduced for the divided tendon condition. The results of this study provide evidence that one potential mechanism for the reduction in strength observed with cuff tear is reduction of muscle moment arms. The model provides a platform for future studies addressing mechanisms responsible for reduced muscle force and joint strength including changes to muscle length-tension operating range due to altered muscle and tendon excursions, and the effects of cuff tear size and location on moment arms and muscle forces.     

Effect of rotator cuff exercise on humeral rotation torque in healthy individuals

Conservative management of rotator cuff pathology often involves certain therapeutic exercises. Although a major goal of these exercises is to increase strength of the rotator cuff, little empirical evidence supports this assertion. In this study, 34 nonpathologic young adults were pretested using a LIDO Multijoint II isokinetic device for average and peak torque generated during internal and external rotation. Subjects were arbitrarily assigned to a right-arm- or left-arm-trained group, exercised for 4 weeks, and then posttested for changes in humeral rotation torque. Moderate but significant increases in torque (8-10%) as well as in total work done were observed in both groups, only in the trained arm. Subjects who trained the nondominant (left) arm experienced gains similar to those who trained the right arm. Gains were significant in the case of both internal and external rotation (also average as well as peak torque), with men and women experiencing the same relative increases. These data, in addition to supporting the use of selected exercises to increase humeral rotation torque in a healthy population, offer a potential model for the rehabilitation of patients with rotator cuff injury.     

Effect of biceps-to-triceps transfer on rotator cuff stress during upper limb weight-bearing lift in tetraplegia: A modeling and simulation analysis

Rotator cuff stress during upper limb weight-bearing lifts presumably contribute to rotator cuff disease, which is the most common cause of shoulder pain in individuals with tetraplegia. Elbow extension strength appears to be a key determinant of rotator cuff stress during upper limb weight-bearing lifts since individuals with paraplegia who generate greater elbow extensor moments experience lower rotator cuff stress relative to individuals with tetraplegia. Biceps-to-triceps transfer surgery can increase elbow extension strength in individuals with tetraplegia. The purpose of this study was to determine whether active elbow extension via biceps transfer decreases rotator cuff stress during weight-bearing lifts in individuals with tetraplegia. A forward dynamics computational framework was used to estimate muscle stress during the lift; stress was computed as muscle force divided by the peak isometric muscle force. We hypothesized that rotator cuff stresses would be lower in simulated lifting with biceps transfer relative to simulated lifting without biceps transfer. We found that limited elbow extension strength in individuals with tetraplegia, regardless of whether elbow strength is enabled via biceps transfer or is residual after spinal cord injury, results in muscle stresses exceeding 85% of the peak isometric muscle stress in the supraspinatus, infraspinatus, and teres minor. The rotator cuff stresses we estimated suggest that performance of weight-bearing activities should be minimized or assisted in order to reduce the risk for shoulder pain. Our results also indicate that biceps transfer is unlikely to decrease rotator cuff stress during weight-bearing lifts in individuals with tetraplegia.     

The effect of lactate concentration on the handgrip strength during judo bouts

Judo is a combat sport in which the athletes attempt to hold and control their adversary through gripping techniques (kumi-kata) to apply opportune throwing techniques (nage-waza). Twelve male judo athletes, representing national teams, were recruited to investigate the changes in the maximal isometric strength in both hands before (pre) and after (post) 4 judo bouts and its relationship with the maximal blood lactic acid concentration. The subjects performed a maximal isometric contraction with each hand immediately before and after each bout. A blood sample was taken at 1, 3, and 14 minutes after each bout, and the lactic acid concentration was determined. An overall effect of the successive bouts on the maximal isometric handgrip strength of prebouts was observed for both hands (p < 0.05) but not in that of postbouts (p > 0.05). The dominant hand showed an overall decrease in the maximal isometric strength because of the bout, with the decrease being significant for the first, third, and fourth bouts (p < 0.05). The nondominant hand only showed a significant decrease in the first prebout and postbout (p < 0.05). We observed an inverse relationship between the maximal isometric handgrip strength of postbouts and maximum lactic acid concentration (Lacmax), and between the maximal isometric handgrip strength of postbouts and the lactic acid concentration at minute 14 of the recovery period (Lac14) (p < 0.05). These results show that successive judo bouts significantly reduce the maximal isometric strength of both hands and may suggest that fatigue of each hand depends on different factors. An enhanced understanding of the behavior of the isometric handgrip strength, and the factors that affect grip fatigue during judo bouts in the dominant and nondominant hands, can aid coaches in developing optimal training and exercise interventions that are aimed at mitigating decreases in the capacity of judo athletes to perform a grip.     

3D finite element models of shoulder muscles for computing lines of actions and moment arms

Accurate representation of musculoskeletal geometry is needed to characterise the function of shoulder muscles. Previous models of shoulder muscles have represented muscle geometry as a collection of line segments, making it difficult to account for the large attachment areas, muscle–muscle interactions and complex muscle fibre trajectories typical of shoulder muscles. To better represent shoulder muscle geometry, we developed 3D finite element models of the deltoid and rotator cuff muscles and used the models to examine muscle function. Muscle fibre paths within the muscles were approximated, and moment arms were calculated for two motions: thoracohumeral abduction and internal/external rotation. We found that muscle fibre moment arms varied substantially across each muscle. For example, supraspinatus is considered a weak external rotator, but the 3D model of supraspinatus showed that the anterior fibres provide substantial internal rotation while the posterior fibres act as external rotators. Including the effects of large attachment regions and 3D mechanical interactions of muscle fibres constrains muscle motion, generates more realistic muscle paths and allows deeper analysis of shoulder muscle function.     

Predicting Rotator Cuff Tears Using Data Mining and Bayesian Likelihood Ratios

Objectives

Rotator cuff tear is a common cause of shoulder diseases. Correct diagnosis of rotator cuff tears can save patients from further invasive, costly and painful tests. This study used predictive data mining and Bayesian theory to improve the accuracy of diagnosing rotator cuff tears by clinical examination alone.

Methods

In this retrospective study, 169 patients who had a preliminary diagnosis of rotator cuff tear on the basis of clinical evaluation followed by confirmatory MRI between 2007 and 2011 were identified. MRI was used as a reference standard to classify rotator cuff tears. The predictor variable was the clinical assessment results, which consisted of 16 attributes. This study employed 2 data mining methods (ANN and the decision tree) and a statistical method (logistic regression) to classify the rotator cuff diagnosis into “tear” and “no tear” groups. Likelihood ratio and Bayesian theory were applied to estimate the probability of rotator cuff tears based on the results of the prediction models.

Results

Our proposed data mining procedures outperformed the classic statistical method. The correction rate, sensitivity, specificity and area under the ROC curve of predicting a rotator cuff tear were statistical better in the ANN and decision tree models compared to logistic regression. Based on likelihood ratios derived from our prediction models, Fagan''s nomogram could be constructed to assess the probability of a patient who has a rotator cuff tear using a pretest probability and a prediction result (tear or no tear).

Conclusions

Our predictive data mining models, combined with likelihood ratios and Bayesian theory, appear to be good tools to classify rotator cuff tears as well as determine the probability of the presence of the disease to enhance diagnostic decision making for rotator cuff tears.     

Contributing factors to performance of a medicine ball explosive power test: a comparison between jump and nonjump athletes

The present study examined the factors contributing to performance of a backward overhead medicine ball throw (B-MBT) across 2 types of athletes. Twenty male volleyball players (jump athletes) and 20 wrestlers (nonjump athletes) were evaluated on 4 measures of power, including B-MBT, chest medicine ball throw (C-MBT), countermovement vertical jump (CMJ), and power index (PI). The athletes also completed 3 measures of strength: a 1-repetition-maximum (1RM) bench press (BP), a 1RM leg press (LP), and combined BP + LP strength. Jump athletes demonstrated greater absolute scores for CMJ, C-MBT, and B-MBT (p < 0.05), whereas nonjump athletes demonstrated greater strength scores for BP and for BP + LP (p < 0.05). When performances were examined on a relative basis, jump athletes achieved superior scores for C-MBT (p < 0.05), whereas nonjump athletes had greater scores for BP, LP, and BP + LP (p < 0.05). For both groups, B-MBT had strong correlations with PI (r = 0.817 [jump] and 0.917 [nonjump]), whereas for C-MBT, only nonjump athletes demonstrated a strong correlation (r = 0.842). When expressed in relative terms, B-MBT was strongly correlated with C-MBT (r = 0.762 [jump] and 0.835 [nonjump]) and CMJ (r = 0.899 [jump] and 0.945 [nonjump]). Only nonjump athletes demonstrated strong correlations with strength for absolute LP (r = 0.801) and BP + LP (r = 0.810) strength. The interaction of upper- and lower-body strength and power in the performance of a B-MBT appears complex, with the contributing factors differing for athletes with divergent skill sets and performance demands.     

Biceps tenotomy in the presence of a supraspinatus tear alters the adjacent intact tendons and glenoid cartilage

A rotator cuff tear is a common injury in athletes and workers who repeatedly perform overhead movements, and it is not uncommon for this demographic to return to activity shortly after treatment. A biceps tenotomy is often performed in the presence of a rotator cuff tear to help reduce pain and improve joint function. However, the effect of this procedure on the surrounding tissues in the glenohumeral joint is unknown. Therefore, the purpose of this study was to investigate the effect of a biceps tenotomy in the presence of a supraspinatus rotator cuff tear followed by overuse activity on ambulatory function and mechanical and histologic properties of the remaining rotator cuff tendons and glenoid cartilage. 46 rats underwent 4 weeks of overuse activity to create a tendinopathic condition, then were randomized into two groups: unilateral detachment of the supraspinatus tendon or detachment of the supraspinatus and long head of the biceps tendons. Ambulatory measurements were performed throughout the 8 weeks prior to euthanasia, followed by analysis of the properties of the remaining intact tendons and glenoid cartilage. Results demonstrate that shoulder function was not effected in the biceps tenotomy group. However, the intact tendons and glenoid cartilage showed altered mechanical and histologic properties. This study provides evidence from an animal model that does not support the use of tenotomy in the presence of a supraspinatus tendon rotator cuff tear, and provides a framework for physicians to better prescribe long-term treatment strategies for patients.     

Rotator cuff tears: what have we learned from animal models?

Rotator cuff tendon tears are among the most common soft tissue injuries that occur at the shoulder. Despite advancements in surgical repair techniques, rotator cuff repairs experience a high rate of failure. The common occurrence of tears and the frequency of re-tears require a further understanding of the mechanisms associated with injuries, healing, and regeneration of the rotator cuff. This paper reviews in vivo studies using the various animal shoulder models of the rat, rabbit, sheep, canine, and primate. These animal models have been used to study intrinsic and extrinsic factors leading to shoulder degeneration, various suture techniques, effects of post-surgical treatment, numerous biologic and synthetic scaffolds, and an assortment of biologic augmentations used to accelerate healing. These effects can be examined in a controlled manner using animal models without other confounding factors that sometimes limit clinical studies. The clinically impactful results will be explained to highlight the specific knowledge gained from using animal models in rotator cuff research.     

Comparison of trunk kinematics in trunk training exercises and throwing

Strength and conditioning professionals, as well as coaches, have emphasized the importance of training the trunk and the benefits it may have on sport performance and reducing the potential for injury. However, no data on the efficacy of trunk training support such claims. The purpose of this study was to examine the maximum differential trunk rotation and maximum angular velocities of the pelvis and upper torso of participants while they performed 4 trunk exercises (seated band rotations, cross-overs, medicine ball throws, and twisters) and compare these trunk exercise kinematics with the trunk kinematics demonstrated in actual throwing performance. Nine NCAA Division I baseball players participated in this study. Each participant's trunk kinematics was analyzed while he performed 5 repetitions of each exercise in both dominant and nondominant rotational directions. Results indicated maximum differentiated rotation in all 4 trunk exercises was similar to maximum differentiated rotation (approximately 50-60 degrees) demonstrated in throwing performance. Maximum angular velocities of the pelvis and upper torso in the trunk exercises were appreciably slower (approximately 50% or less) than the angular velocities demonstrated during throwing performance. Incorporating trunk training exercises that demonstrate sufficient trunk ranges of motion and velocities into a strength and conditioning program may help to increase ball velocity and/or decrease the risk injury.     

关节镜下同期行冻结肩松解术对肩袖损伤患者的治疗效果评估

目的:评估关节镜下同期行冻结肩松解术对肩袖损伤患者的治疗效果。方法:选择2015年3月到2018年3月在我院诊治的肩袖损伤患者70例进行研究,按随机数表法将其分为观察组(n=36)和对照组(n=34)。对照组采用传统小切口肩袖修复术治疗,观察组采用关节镜下同期行冻结肩松解术进行治疗。比较两组治疗后疗效、手术时间、术中出血量、住院时间、疼痛减轻时间、治疗前后VAS、美国肩肘外科协会评分(ASES)、Contant-Muley评分的变化情况。结果:治疗后,观察组总有效率为94.44%,显著高于对照组(73.53%,P0.05);观察组手术时间、术中出血量、住院时间及疼痛减轻时间均显著低于对照组(P0.05);两组VAS、ASES、Contant-Muley评分较治疗前均显著改善(P0.05),且观察组VAS评分明显低于对照组,ASES及Contant-Muley评分显著高于对照组(P0.05)。结论:关节镜下同期行冻结肩松解术治疗肩袖损伤的临床疗效显著优于传统小切口肩袖修复术治疗,其可显著促进关节功能恢复,并减轻患者痛苦。