High pressure microscopy--a powerful tool for monitoring cells and macromolecules under high hydrostatic pressure.

A high pressure chamber, which withstands a pressure up to 300 MPa has been developed. The so-called HPDS (Hartmann, Pfeifer, Dornheim, Sommer) High Pressure Cell in combination with an inverted microscope and an analysis system allows brilliant microscopic colour pictures with an optical resolution better than 0.56 microm. The pressure chamber allows the in situ observation of dynamic changes of microscopic structures in bright field, phase contrast and fluorescence microscopy. This publication should demonstrate the capabilities of the system using results of experiments with two types of Spirogyra algae. The pictures have shown significant variations of the chloroplasma and the cell wall membrane at pressures of up to 120 MPa. The new system provides a simple way to perform microscopic analyses at pressures of up to 300 MPa.     

Microelectrodes suitable for use in cells with high hydrostatic pressure

Microelectrodes with a 1- to 2-mum tip diameter have been made which are capable of withstanding plant cell hydrostatic pressure on impalement. Filling the electrodes with 1% agar or 5% gelatin in 2 m KCl prevents cytoplasmic contents from moving into the electrode tip on impalement and therefore prevents the irreversible increase in resistance which often occurs. The agar and gelatin electrodes were tested in two fresh water algae, Nitella translucens and Mougeotia sp., and the potentials recorded were found comparable to those recorded with standard 2 m KCl electrodes.     

Stability of subtilisin and lysozyme under high hydrostatic pressure

The stabilities of subtilisin and lysozyme under hydrostatic pressures up to 200 MPa were investigated for up to 7 days at 25 degrees C. Methods were chosen to assess changes in tertiary and secondary protein structure as well as aggregation state. Tertiary structure was monitored in situ with second derivative UV spectroscopy and after pressure treatment by dynamic light scattering and second derivative UV spectroscopy. Secondary structure and potential secondary structural changes were characterized by second derivative FTIR spectroscopy. Changes in aggregation state were assessed using dynamic light scattering. Additionally, protein concentration balances were carried out to detect any loss of protein as a function of pressure. For the conditions tested, neither protein shows measurable changes in tertiary or secondary structure or signs of aggregation. Lysozyme concentration balances show no dependence on pressure. Subtilisin concentration balances at high protein concentration (4 mg/mL and higher) do not show pressure dependence. However, the concentration balances carried out at 0.4 mg/mL show a clear sign of pressure dependence. These results may be explained by protein interaction with the vial surface and appear to be rate limited by the equilibrium between active and inactive protein on the surface. Pressure increases protein loss, and the estimated partial molar volume change between the two states is estimated to be -20 +/- 10 mL/mol.     

Structural stability of human butyrylcholinesterase under high hydrostatic pressure

Human butyrylcholinesterase is a nonspecific enzyme of clinical, pharmacological and toxicological significance. Although the enzyme is relatively stable, its activity is affected by numerous factors, including pressure. In this work, hydrostatic pressure dependence of the intrinsic tryptophan fluorescence in native and salted human butyrylcholinesterase was studied up to the maximum pressure at ambient temperature of about 1200 MPa. A correlated large shift toward long wavelengths and broadening observed at pressures between 200 and 700 MPa was interpreted as due to high pressure-induced denaturation of the protein, leading to an enhanced exposure of tryptophan residues into polar solvent environment. This transient process in native butyrylcholinesterase presumably involves conformational changes of the enzyme at both tertiary and secondary structure levels. Pressure-induced mixing of emitting local indole electronic transitions with quenching charge transfer states likely describes the accompanying fluorescence quenching that reveals different course from spectral changes. All the pressure-induced changes turned irreversible after passing a mid-point pressure of about 400 ± 50 MPa. Addition of either 0.1 M ammonium sulphate (a kosmotropic salt) or 0.1 M lithium thiocyanate (a chaotropic salt) to native enzyme similarly destabilized its structure.     

An improved sampling technique for bacterial cultures under high hydrostatic pressure

A sampling technique for bacterial cultures subjected to high hydrostatic pressure is described. A sample-receiving vessel with a motor driven interface-piston is employed. By precisely matching the pressures in the bulk culture and the sample-receiving vessel, none of the sample is subjected to the high shear forces common to other desings of high pressure sampler. The use of the technique was illustrated by the growth of an anaerobic culture at 300 bar and 75°C.     

An in vitro system for measuring endothelial permeability under hydrostatic pressure

A system was developed, using early passage porcine aortic endothelial cells cultured on a microporous substratum mounted in a two-compartment chamber. It allows the application of a transendothelial pressure gradient and quantitative measurement of the resulting flow rate of fluid. Initial application of a hydrostatic pressure gradient of 20 mmHg resulted in a continuous decrease in the flow rate which reached a steady state after a period of 1-3 h. Further variations in the pressure resulted in pressure-dependent increase or decrease in the flow rate. The physiological relevance of this response is supported by the fact that decrease in permeability occurred only in the presence of Ca2+ ions. Removal of Ca2+ from a monolayer by EGTA led to an immediate increase in the flow rate, whereas readdition of Ca2+ in concentrations between 0.5 and 20 mM was observed to cause a concentration-dependent decrease in flow rate. Initial application of pressure with Ca2+-free medium failed to produce permeability changes of the cultured endothelium. These findings indicate that the permeability of a cultured endothelium to water and solutes is pressure- and Ca2+-dependent.     

A constant-temperature observation chamber for use with microscopic organisms

A constant-temperature observaton chamber was developed during a project requiring data on normal, resting heartrates of newly hatched fry of closely related fish species. Details of assembly are described, sample results are included and discussed briefly, and some possible uses for the chamber are mentioned.     

A high throughput system for long term application of intermittent cyclic hydrostatic pressure on cells in culture

The process of bone remodeling is governed by mechanical stresses and strains. Studies on the effects of mechanical stimulation on cell response are often difficult to compare as the nature of the stimuli and differences in parameters applied vary greatly. Experimental systems for the investigation of mechanical stimuli are mostly limited in throughput or flexibility and often the sum of several stimuli is applied. In this work, a flexible system that allows the investigation of cell response to isolated intermittent cyclic hydrostatic pressure (icHP) on a high throughput level is shown. Human bone derived cells were cultivated with or without mechanical stimulus in the presence or absence of chemical cues triggering osteogenesis for 7-10 days. Cell proliferation and osteogenic differentiation were evaluated by cell counting and immunohistochemical staining for bone alkaline phosphatase as well as collagen 1, respectively. In either medium, both cell proliferation and level of differentiation were increased when the cultures were mechanically stimulated. These initial results therefore qualify the present system for studies on the effects of isolated icHP on cell fate and encourage further investigations on the details behind the observed effects.     

Electron transfer and electronic energy relaxation under high hydrostatic pressure

The following question has been addressed in the present work. How external high (up to 8 kbar) hydrostatic pressure acts on photoinduced intramolecular electron transfer and on exciton relaxation processes? Unlike phenomena, as they are, have been studied in different systems: electron transfer in an artificial Zn-porphyrin-pyromellitimide (ZnP-PM) supramolecular electron donor-acceptor complex dissolved in toluene measured at room temperature; exciton relaxation in a natural photosynthetic antenna protein called FMO protein measured at low temperatures, between 4 and 100 K. Spectrally selective picosecond time-resolved emission technique has been used to detect pressure-induced changes in the systems. The following conclusions have been drawn from the electron transfer study: (i) External pressure may serve as a potential and sensitive tool not only to study, but also to control and tune elementary chemical reactions in solvents; (ii) Depending on the system parameters, pressure can both accelerate and inhibit electron transfer reactions; (iii) If competing pathways of the reaction are available, pressure can probably change the branching ratio between the pathways; (iv) The classical nonadiabatic electron transfer theory describes well the phenomena in the ZnP-PM complex, assuming that the driving force or/and reorganisation energy depend linearly on pressure; (v) A decrease in the ZnP-PM donor-acceptor distance under pressure exerts a minor effect on the electron transfer rate. The effect of pressure on the FMO protein exciton relaxation dynamics at low temperatures has been found marginal. This may probably be explained by a unique structure of the protein [D.E. Trondrud, M.F. Schmid, B.W. Matthews, J. Mol. Biol. 188 (1986) p. 443; Y.-F. Li, W. Zhou, E. Blankenship, J.P. Allen, J. Mol. Biol., submitted]. A barrel made of low compressibility beta-sheets may, like a diving bell, effectively screen internal bacteriochlorophyll a molecules from external influence of high pressure. The origin of the observed slow pico = and subnanosecond dynamics of the excitons at the exciton band bottom remains open. The phenomenon may be due to weak coupling of phonons to the exciton states or/and to low density of the relevant low-frequency ( approximately 50 cm(-1)) phonons. Exciton solvation in the surrounding protein and water-glycerol matrix may also contribute to this effect. Drastic changes of spectral, kinetic and dynamic properties have been observed due to protein denaturation, if the protein was compressed at room temperature and then cooled down, as compared to the samples, first cooled and then pressurised.     

Subsampling technique for measuring growth of bacterial cultures under high hydrostatic pressure.

A method is presented for measuring growth of bacteria under high hydrostatic pressure in subsamples taken without pressure change in the incubation vessel. Subsamples may be withdrawn rapidly (5 s) and are not subjected to shear forces. Vice versa, nutrient media, labeled substrates, etc., may be introduced into the culture while under pressure. Chemical fixation of subsamples for electron microscopy or adenosine 5'-triphosphate determinations under pressure is also possible without affecting the growing culture. Data are given of growth experiments demonstrating the feasibility of the method. Problems of oxygen depletion are discussed.     

Mini chamber system for long-term maintenance and observation of cultured cells

We constructed a mini chamber system that was able to maintain cell culture on a microscope for long periods. It is a modified closed system with medium perfusion and CO2 circulation. The closed CO2 circulation and ample air inside the chamber distinguish it from other closed systems. Using different cell lines, the system was shown to be able to support long-term, time-lapse recording. After 229 hours of time-lapse recording, A2058 cells (a melanoma cell line) became overconfluent but still multiplied. Many CAD cells (a murine neuron-like cell line) still moved their cell bodies and kept their neurite-like processes after 28 days of recording. The entire healing process of a scratch-wounded 124 (a bladder cancer cell line) monolayer can be monitored. Such a modified closed system should find many applications in developmental biology, cell biology, and cancer biology where long-term, time-lapse recording is required or when the health of cells is important.     

Sub-zero temperature inactivation of carboxypeptidase Y under high hydrostatic pressure.

High hydrostatic pressure induced cold inactivation of carboxypeptidase Y. Carboxypeptidase Y was fully active when exposed to subzero temperature at 0.1 MPa; however, the enzyme became inactive when high hydrostatic pressure and subzero temperature were both applied. When the enzyme was treated at pressures higher than 300 MPa and temperatures lower than -5 degrees C, it underwent an irreversible inactivation in which nearly 50% of the alpha-helical structure was lost as judged by circular dichroism spectral analysis. When the applied pressure was limited to below 200 MPa, the cold inactivation process appeared to be reversible. In the presence of reducing agent, this reversible phenomenon, observed at below 200 MPa, diminished to give an inactive enzyme; the agent reduces some of disulfide bridge(s) in an area of the structure that is newly exposed area because of the cold inactivation. Such an area is unavailable if carboxypeptidase Y is in its native conformation. Because all the disulfide bridges in carboxypeptidase Y locate near the active site cleft, it is suggested that the structural destruction, if any, occurs preferentially in this disulfide rich area. A possible mechanism of pressure-dependent cold inactivation of CPY is to destroy the alpha-helix rich region, which creates an hydrophobic environment. This destruction is probably a result of the reallocation of water molecules. Experiments carried out in the presence of denaturing agents (SDS, urea, GdnHCl), salts, glycerol, and sucrose led to a conclusion consistent with the idea of water reallocation.     

Differential polarized phase fluorometric studies of phospholipid bilayers under high hydrostatic pressure

Differential polarized phase fluorometry was used to quantify the rotational rate ($\text{R}$) and limiting anisotropy ($\text{r}{}_{\mathrm{\infty }}$) of the membrane probe diphenylhexatriene (DPH) in solvents and lipid vesicles exposed to hydrostatic pressures ranging from 1 bar to 2 kbar. These measurements reveal the effect of pressure on the phase-transition temperatures of the phosphatidylcholine vesicles, and the effects of pressure on order parameter of the acyl side-chain region of the membranes, the latter as indicated by $\text{r}{}_{\mathrm{\infty }}$. In addition to the well-known elevation of the transition temperature ($\text{T}{}_{\mathrm{<mtext>c</mtext>}}$) with pressure, our results demonstrate that increased pressure restores the order of the bilayers to that representative of temperatures below the transition temperature. We also found that solvents which allowed free isotropic rotation of DPH at 1 bar no longer allowed free rotation when sufficiently compressed; moreover, the apparent DPH rotational rate increased with $\text{r}{}_{\mathrm{\infty }}$. Pressure studies using both DPH and the charged DPH analogue, trimethylammonium DPH (TMA-DPH) indicated that the $\text{T}{}_{\mathrm{<mtext>c</mtext>}}$ of dipalmitoylphosphatidylcholine vesicles increased 23 K/kbar and an apparent volume change of 0.036 ml/mol lipid at the phase transition. Assuming, as has been proposed, that TMA-DPH is localized near the glycerol backbone region of the bilayers, these results indicate a similar temperature- and pressure-dependent phase transition in this region and the acyl side-chain region of the membrane.     

Flying-patch patch-clamp study of G22E-MscL mutant under high hydrostatic pressure

High hydrostatic pressure (HHP) present in natural environments impacts on cell membrane biophysical properties and protein quaternary structure. We have investigated the effect of high hydrostatic pressure on G22E-MscL, a spontaneously opening mutant of Escherichia coli MscL, the bacterial mechanosensitive channel of large conductance. Patch-clamp technique combined with a flying-patch device and hydraulic setup allowed the study of the effects of HHP up to 90 MPa (as near the bottom of the Marianas Trench) on the MscL mutant channel reconstituted into liposome membranes, in addition to recording in situ from the mutant channels expressed in E. coli giant spheroplasts. In general, against thermodynamic predictions, hydrostatic pressure in the range of 0.1–90 MPa increased channel open probability by favoring the open state of the channel. Furthermore, hydrostatic pressure affected the channel kinetics, as manifested by the propensity of the channel to gate at subconducting levels with an increase in pressure. We propose that the presence of water molecules around the hydrophobic gate of the G22E MscL channel induce hydration of the hydrophobic lock under HHP causing frequent channel openings and preventing the channel closure in the absence of membrane tension. Furthermore, our study indicates that HHP can be used as a valuable experimental approach toward better understanding of the gating mechanism in complex channels such as MscL.     

PKC-dependent IL-6 production and inhibition of IL-8 production by PKC activation in normal human skin fibroblasts under extremely high hydrostatic pressure

Normal human dermal fibroblasts were found to survive and to be active in producing interleukin (IL)-6 and IL-8 under extremely high hydrostatic pressure, up to 40 MPa (1 atm=0.101325 MPa=1.03323 kgf/cm(2)), for 20 min. An inhibitor of protein kinase C (PKC) reduced the amount of IL-6 production, whereas IL-8 production was increased following pressure application. The activation of PKC in response to exposure to the pressure stress was detected by using the PKC-specific probe Rim-1. These findings indicate that IL-6 production induced by hydrostatic pressure stresses was dependent on the PKC signaling pathway. In contrast, pressure-induced IL-8 production was inhibited by PKC activity.     

Changes in rabbit skeletal myosin and its subfragments under high hydrostatic pressure

The pressure-induced denaturation of rabbit skeletal myosin and its subfragments under hydrostatic pressure were investigated. Four nanometer of red shift of the intrinsic fluorescence spectrum was observed in myosin under a pressure of 400 MPa. The ANS fluorescence of myosin increased with elevating pressure. Changes in the intrinsic fluorescence spectra of myosin and its subfragments were quantified and expressed as the center of spectral mass. The center of spectral mass of myosin and its subfragments linearly decreased with elevating pressure, and increased with lowering pressure. The fluorescence intensity of the ANS-labeled rod did not change during pressure treatment. The present results indicate that the most pressure-sensitive portion of myosin molecule is the head. Hysteresis of the center of spectral mass of S1 appeared under pressures above 300 MPa. Changes in the center of spectral mass of S1 above 350 MPa showed stronger hysteresis. The center of spectral mass did not decrease above 350 MPa during the compression process, indicating that S1 was stable in a partially denatured state at 350 MPa under pressure. The changes in the relative intensities of ANS fluorescence of S1 were measured under pressures up to 400 MPa, and the ANS fluorescence intensity increased with elevating pressure but it did not change after pressure release. The ANS fluorescence intensity increased under constant pressure suggesting that the pressure-induced denaturation of myosin was accelerated during pressurization.