A 1-year study of osteoinduction in hydroxyapatite-derived biomaterials in an adult sheep model: part I

The study presented here investigated hydroxyapatite biomaterials implanted in soft-tissue sites in adult sheep to determine whether these materials are osteoinductive and whether the rate of osteoinduction can be increased by manipulating the composition and porosity of the implants. For the study, 16.8-mm x 5-mm discs were prepared from mixtures of hydroxyapatite and beta-tricalcium phosphate. Five mixtures of hydroxyapatite-ceramic and hydroxyapatite-cement paste forms were studied: 100 percent hydroxyapatite-ceramic (Interpore), 60 percent hydroxyapatite-ceramic, 100 percent hydroxyapatite-cement paste, 60 percent hydroxyapatite-cement paste, and 20 percent hydroxyapatite-cement paste. Biomaterials were implanted in subcutaneous and intramuscular soft-tissue pockets in 10 adult sheep. Cranial bone grafts of equal dimension were implanted as controls. One year after implantation, the volume of all biomaterials and bone grafts was determined from a computed tomographic scan, and porosity and bone formation were determined using backscatter electron microscopy. Cranial bone and the 20 percent hydroxyapatite-cement paste implants demonstrated significant volume reduction in all sites after 1 year (p < 0.001). No significant difference in volume of the remaining four biomaterials was found. There was no significant change in pore size in the ceramic implants (range, 200 to 300 micro) and in the cement-paste implants containing 60 percent hydroxyapatite or more (range, 3 to 5 nm). Pore size in the cement-paste implants containing 20 percent hydroxyapatite increased significantly with resorption of the tricalcium-phosphate component, reaching a maximum of 200 to 300 micro in the periphery, where the greatest tricalcium-phosphate resorption had occurred. Both ceramic biomaterials demonstrated lamellar bone deposition within well-formed haversian systems through the entire depth of the implants, ranging from a mean of 6.6 percent to 11.7 percent. There was minimal bone formation in the cement-paste implants containing 60 percent hydroxyapatite or more. In contrast, cement-paste implants containing 20 percent hydroxyapatite demonstrated up to 10 percent bone replacement, which was greatest in the periphery of the implants where the greatest tricalcium-phosphate resorption had occurred. This study confirms the occurrence of true osteoinduction within hydroxyapatite-derived biomaterials, when examined using backscatter techniques. In this study, the rate of osteoinduction was greatest when a porous architecture was maintained, which was best achieved in ceramic rather than cement-paste forms of hydroxyapatite. Porosity and resultant bone formation in cement-paste implants can be improved by combining hydroxyapatite with a rapidly resorbing component, such as tricalcium phosphate.     

Induction of bone formation by recombinant human osteogenic protein-1 and sintered porous hydroxyapatite in adult primates

A critical issue in tissue engineering and morphogenesis of bone is the development of novel biomimetic biomaterials that are capable of optimizing the biological activity of recombinant human bone morphogenetic and osteogenic proteins, which are molecules that initiate bone formation in vivo. From a therapeutic perspective, a carrier matrix is required for the local delivery of these proteins to evoke a desired osteogenic effect. In view of the affinity of these proteins for hydroxyapatite, which may reflect the in vivo supramolecular assembly of bone proteins bound to both the extracellular matrix and the mineral component of bone, we investigated the efficacy of single applications of different doses of human osteogenic protein-1 (hOP-1) adsorbed onto sintered porous hydroxyapatites for bone induction in orthotopic calvarial defects in 12 adult male baboons (Papio ursinus) and heterotopically in the rectus abdominis of four additional baboons. In orthotopic specimens, pretreatment of sintered porous hydroxyapatites with 100 microgram of hOP-1 in 500 microliter of 5 mM hydrochloric acid resulted in rapid and diffuse osteoinduction restricted within the porous spaces of the hydroxyapatite, as evaluated by histology and histomorphometry on day 30. Hydroxyapatites treated with 500 microgram of hOP-1 showed a different pattern of bone formation and distribution on day 30 as compared with the lower dose of the recombinant morphogen. Although bone formation was extensive with the higher dose, it was found on the endocranial and pericranial aspects of the specimens, enveloping the implanted hydroxyapatite carrier, and the internal porous spaces were occupied by a rich vascular network without any bone formation. By 90 and 365 days after the implantation of both doses of hOP-1, however, there was remodelling and complete penetration of the newly induced bone within the available porous spaces. The combination of hOP-1 and hydroxyapatite also showed extensive bone formation in heterotopic specimens harvested from the rectus abdominis muscle of the baboon using doses of 5, 25, and 45 microgram of hOP-1 per implant. These findings in the adult primate demonstrate extensive bone formation by hOP-1 adsorbed onto sintered porous hydroxyapatites and suggest that predictable osteogenesis in clinical contexts for treatment of craniofacial bone defects may be engineered using inorganic, nonimmunogenic, and carvable delivery systems that initiate osteogenesis with relatively low doses of recombinant osteogenic proteins, thus mimicking the macrostructure and microstructure of living bone.     

A rotating bed system bioreactor enables cultivation of primary osteoblasts on well‐characterized sponceram® regarding structural and flow properties

The development of bone tissue engineering depends on the availability of suitable biomaterials, a well‐defined and controlled bioreactor system, and on the use of adequate cells. The biomaterial must fulfill chemical, biological, and mechanical requirements. Besides biocompatibility, the structural and flow characteristics of the biomaterial are of utmost importance for a successful dynamic cultivation of osteoblasts, since fluid percolation within the microstructure must be assured to supply to cells nutrients and waste removal. Therefore, the biomaterial must consist of a three‐dimensional structure, exhibit high porosity and present an interconnected porous network. Sponceram®, a ZrO₂ based porous ceramic, is characterized in the presented work with regard to its microstructural design. Intrinsic permeability is obtained through a standard Darcy's experiment, while Young's modulus is derived from a two plates stress–strain test in the linear range. Furthermore, the material is applied for the dynamic cultivation of primary osteoblasts in a newly developed rotating bed bioreactor. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Poroelastic analysis of interstitial fluid flow in a single lamellar trabecula subjected to cyclic loading

Trabecula, an anatomical unit of the cancellous bone, is a porous material that consists of a lamellar bone matrix and interstitial fluid in a lacuno-canalicular porosity. The flow of interstitial fluid caused by deformation of the bone matrix is believed to initiate a mechanical response in osteocytes for bone remodeling. In order to clarify the effect of the lamellar structure of the bone matrix—i.e., variations in material properties—on the fluid flow stimuli to osteocytes embedded in trabeculae, we investigated the mechanical behavior of an individual trabecula subjected to cyclic loading based on poroelasticity. We focused on variations in the trabecular permeability and developed an analytical solution containing both transient and steady-state responses for interstitial fluid pressure in a single trabecular model represented by a multilayered two-dimensional poroelastic slab. Based on the obtained solution, we calculated the pressure and seepage velocity of the interstitial fluid in lacuno-canalicular porosity, within the single trabecula, under various permeability distributions. Poroelastic analysis showed that a heterogeneous distribution of permeability produces remarkable variations in the fluid pressure and seepage velocity in the cross section of the individual trabecula, and suggests that fluid flow stimuli to osteocytes are mostly governed by the value of permeability in the neighborhood of the trabecular surfaces if there is no difference in the average permeability in a single trabecula.     

Numerical simulation of the effect of permeability on the hydrodynamics in a parallel-plate coculture flow chamber

To study the effect of the porous membrane permeability on the hydrodynamics in a parallel-plate coculture flow chamber (PPcFC), we demonstrated the permeability of the porous membrane as a function of some parameters, such as porosity, membrane thickness, pore size and shape of the membrane. The effect of permeability on the flow in the PPcFC was analysed using the commercial software – Fluent. Results showed that the permeability was directly proportional to the thickness, the porosity and the pore size of the membrane, and inversely proportional to the surface shape factor. To ensure the best flow pattern, the inlet velocity range was limited by the membrane permeability and fluid viscosity, and then restricted the available magnitudes of shear rate on the permeable membrane. Our findings are helpful in designing and preparing the biomaterials that have adequate mechanical properties for the functional vascular grafts production, and in using of the flow chamber in various investigations.     

Influence of vascular porosity on fluid flow and nutrient transport in loaded cortical bone

Load-induced fluid flow is a key factor in triggering bone modeling and remodeling processes that maintain bone mass and architecture. To provide an enhanced understanding of fluid flow in bone, unique computational models of a tibial section were developed. The purpose of the study was to examine the effects of incorporating vascular porosity on pore fluid pressure and resulting lacunocanalicular flow and to determine the role of load-induced fluid flow in tracer transport. Simulations revealed large local pressure gradients surrounding the vascular canals that were dependent on the magnitude and state (i.e., compressive or tensile) of the stress. Fluid velocity magnitudes were increased by over an order of magnitude in the dual-porosity model, relative to the single-porosity model. Fluid flow had a marked effect on tracer perfusion within the cortex. After 10 loading cycles, a 9-fold increase in tracer concentration, relative to diffusion alone, was observed in the compressive region where fluid exchange was greatest between the lacunocanalicular porosity and the vascular canals. Agreement was achieved between computational results and experimental investigations of electrokinetic phenomenon, tracer transport, cellular stimulation, and functional adaptation. The models produced substantial improvements in bone fluid flow simulation and underscored the significance of incorporating vascular porosity in models designed to quantify fluid pressure and flow characteristics within mechanically loaded cortical bone.     

Fluid pressure relaxation depends upon osteonal microstructure: modeling an oscillatory bending experiment.

When bone is mechanically loaded, bone fluid flow induces shear stresses on bone cells that have been proposed to be involved in bone's mechanosensory system. To investigate bone fluid flow and strain-generated potentials, several theoretical models have been proposed to mimic oscillatory four-point bending experiments performed on thin bone specimens. While these previous models assume that the bone fluid relaxes across the specimen thickness, we hypothesize that the bone fluid relaxes primarily through the vascular porosity (osteonal canals) instead and develop a new poroelastic model that integrates the microstructural details of the lacunar-canalicular porosity, osteonal canals, and the osteonal cement lines. Local fluid pressure profiles are obtained from the model, and we find two different fluid relaxation behaviors in the bone specimen, depending on its microstructure: one associated with the connected osteonal canal system, through which bone fluid relaxes to the nearby osteonal canals; and one associated with the thickness of a homogeneous porous bone specimen (approximately 1 mm in our model), through which bone fluid relaxes between the external surfaces of the bone specimen at relatively lower loading frequencies. Our results suggest that in osteonal bone specimens the fluid pressure response to cyclic loading is not sensitive to the permeability of the osteonal cement lines, while it is sensitive to the applied loading frequency. Our results also reveal that the fluid pressure gradients near the osteonal canals (and thus the fluid shear stresses acting on the nearby osteocytes) are significantly amplified at higher loading frequencies.     

A 1-year study of osteoinduction in hydroxyapatite-derived biomaterials in an adult sheep model: part II. Bioengineering implants to optimize bone replacement in reconstruction of cranial defects

The present study investigated hydroxyapatite biomaterials implanted in critical-size defects in the calvaria of adult sheep to determine the optimal bioengineering of hydroxyapatite composites to facilitate bone ingrowth into these materials. Five calvarial defects measuring 16.8 mm in diameter were made in each of 10 adult sheep. Three defects were filled with cement paste composites of hydroxyapatite and beta-tricalcium phosphate as follows: (1) 100 percent hydroxyapatite-cement paste, (2) 60 percent hydroxyapatite-cement paste, and (3) 20 percent hydroxyapatite-cement paste. One defect was filled with a ceramic composite containing 60 percent hydroxyapatite-ceramic, and the fifth defect remained unfilled. One year after implantation, the volume of all biomaterials was determined by computed tomography, and porosity and bone replacement were determined using backscatter electron microscopy. Computed tomography-based volumetric assessment 1 year after implantation demonstrated that none of the unfilled cranial defects closed over the 1-year period, confirming that these were critical-size defects. There was a significant increase in volume in both the cement paste and ceramic implants containing 60 percent hydroxyapatite (p < 0.01). There was no significant change in volume of the remaining cement paste biomaterials. Analysis of specimens by backscatter electron microscopy demonstrated mean bone replacement of 4.8 +/- 1.4 percent (mean +/- SEM) in 100 percent hydroxyapatite-cement paste, 11.2 +/- 2.3 percent in 60 percent hydroxyapatite-cement paste, and 28.5 +/- 4.5 percent in 20 percent hydroxyapatite-cement paste. There was an inverse correlation between the concentration of hydroxyapatite and the amount of bone replacement in the cement paste for each composite tested (p < 0.01). Bone replacement in 60 percent hydroxyapatite-ceramic composite (13.6 +/- 2.0 percent) was not significantly different from that in 60 percent hydroxyapatite-cement paste. Of note is that the ceramic composite contained macropores (200 to 300 microm) that did not change in size over the 1-year period. All cement paste composites initially contained micropores (3 to 5 nm), which remained unchanged in 100 percent hydroxyapatite-cement paste. Cement paste implants containing increased tricalcium phosphate demonstrated a corresponding increase in macropores following resorption of the tricalcium phosphate component. Bone replacement occurred within the macropores of these implants. In conclusion, there was no significant bone ingrowth into pure hydroxyapatite-cement paste (Bone Source, Stryker-Leibinger Inc., Dallas, Texas) in the present study. The introduction of macropores in a biomaterial can optimize bone ingrowth for reconstruction of critical-size defects in calvaria. This was demonstrated in both the ceramic composite of hydroxyapatite tested and the cement paste composites of hydroxyapatite by increasing the composition of a rapidly resorbing component such as beta-tricalcium phosphate.     

Impact of the porous microstructure on the overall elastic properties of the osteonal cortical bone

Mechanical properties of bones are largely determined by their microstructure. The latter comprises a large number of diverse pores. The present paper analyzes a connection between structure of the porous space of the osteonal cortical bone and bone's overall anisotropic elastic moduli. The analysis is based on recent developments in the theory of porous materials that predict the anisotropic effective moduli of porous solids in terms of pores' shapes, orientations and densities. Bone's microstructure is modeled using available micrographs. The calculated anisotropic elastic constants for porous cortical bone are, mostly, in agreement with available experimental data. The influence of each of the pore types on the overall moduli is examined. The results of the analysis can also be used to estimate the extent of mineralization (hydroxyapatite content) if the overall porosity and the effective moduli are known and, vice versa, to estimate porosity from the measured moduli and the extent of mineralization.     

Induction of bone in composites of osteogenin and porous hydroxyapatite in baboons.

A major goal of the combined effort of basic scientists and plastic and reconstructive surgeons is the development of novel bone substitutes based on osteogenic growth and differentiation factors with optimal delivery systems for skeletal repair. Osteogenin is a protein initiator of bone differentiation. The present study examined the osteogenic potential of osteogenin in combination with porous hydroxyapatite replicas obtained after hydrothermal conversion of calcium carbonate exoskeletons of corals. Bovine osteogenin, with an apparent molecular weight of 28 to 42 kDa, purified by hydroxyapatite-Ultrogel adsorption chromatography, heparin-Sepharose affinity chromatography, and HR Sephacryl S-200 molecular sieve chromatography, was delivered into rods of nonresorbable and resorbable hydroxyapatite replicas with an average porosity of 600 microns. A total of 48 rods were bioassayed for osteogenic activity by intramuscular implantation into eight adult baboons (Papio ursinus) as a prerequisite for clinical trials in humans. Bovine osteogenin fractions reconstituted with baboon insoluble collagenous bone matrix were implanted in an additional four adult baboons. Specimens were harvested at 30 and 90 days after implantation and subjected to histomorphometry and alkaline phosphatase activity determination. Differentiation of bone occurred in nonresorbable hydroxyapatite rods, both osteogenin-treated and controls. However, no bone formation was observed in resorbable rods, even in the presence of osteogenin. These results demonstrate that the surface and chemical characteristics of the substratum, independent of the osteogenic stimulus, have a profound influence on the morphogenesis of bone. The demonstration of bone induction in nonhuman primates with porous nonresorbable hydroxyapatite replicas and baboon insoluble collagenous bone matrix reconstituted with bovine osteogenin establishes the therapeutic potential of the principle of bone induction in craniofacial, periodontal, and orthopedic reconstructive surgery.     

SEM and 3D synchrotron radiation micro-tomography in the study of bioceramic scaffolds for tissue-engineering applications

Different biomaterials have been proposed as scaffolds for the delivery of cells and/or biological molecules to repair or regenerate damaged or diseased bone tissues. Particular attention is being given to porous bioceramics that mimic trabecular bone chemistry and structure. Chemical composition, density, pore shape, pore size, and pore interconnection are elements that have to be considered to improve the efficiency of these biomaterials. Commonly, two-dimensional (2D) systems of analysis such as scanning electron microscope (SEM) are used for the characterization and comparison of the scaffolds. Unfortunately, these systems do not allow a complete investigation of the three-dimensional (3D) spatial structure of the scaffold. In this study, we have considered two different techniques, that is, SEM and 3D synchrotron radiation (SR) micro-CT to extract information on the geometry of two hydroxyapatite (HA) bioceramics with identical chemical composition but different micro-porosity, pore size distribution, and pore interconnection pathway. The two scaffolds were obtained with two different procedures: (a) sponge matrix embedding (scaffold FB), and (b) foaming (scaffold EP). Both scaffolds showed structures suitable for tissue-engineering applications, but scaffold EP appeared superior with regard to interconnection of pores, surface on which the new bone could be deposited, and percentage of volume available to bone deposition.     

A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity

An often-proposed tissue engineering design hypothesis is that the scaffold should provide a biomimetic mechanical environment for initial function and appropriate remodeling of regenerating tissue while concurrently providing sufficient porosity for cell migration and cell/gene delivery. To provide a systematic study of this hypothesis, the ability to precisely design and manufacture biomaterial scaffolds is needed. Traditional methods for scaffold design and fabrication cannot provide the control over scaffold architecture design to achieve specified properties within fixed limits on porosity. The purpose of this paper was to develop a general design optimization scheme for 3D internal scaffold architecture to match desired elastic properties and porosity simultaneously, by introducing the homogenization-based topology optimization algorithm (also known as general layout optimization). With an initial target for bone tissue engineering, we demonstrate that the method can produce highly porous structures that match human trabecular bone anisotropic stiffness using accepted biomaterials. In addition, we show that anisotropic bone stiffness may be matched with scaffolds of widely different porosity. Finally, we also demonstrate that prototypes of the designed structures can be fabricated using solid free-form fabrication (SFF) techniques.     

The effect of charge density on the velocity and attenuation of ultrasound waves in human cancellous bone

Cancellous bone is a highly porous material, and two types of waves, fast and slow, are observed when ultrasound is used for detecting bone diseases. There are several possible stimuli for bone remodelling processes, including bone fluid flow, streaming potential, and piezoelectricity. Poroelasticity has been widely used for elucidating the bone fluid flow phenomenon, but the combination of poroelasticity with charge density has not been introduced. Theoretically, general poroelasticity with a varying charge density is employed for determining the relationship between wave velocity and attenuation with charge density. Fast wave velocity and attenuation are affected by porosity as well as charge density; however, for a slow wave, both slow wave velocity and attenuation are not as sensitive to the effect of charge density as they are for a fast wave. Thus, employing human femoral data, we conclude that charged ions gather on trabecular struts, and the fast wave, which moves along the trabecular struts, is significantly affected by charge density.     

A finite element study of mechanical stimuli in scaffolds for bone tissue engineering

Mechanical stimuli are one of the factors that affect cell proliferation and differentiation in the process of bone tissue regeneration. Knowledge on the specific deformation sensed by cells at a microscopic level when mechanical loads are applied is still missing in the development of biomaterials for bone tissue engineering. The objective of this study was to analyze the behavior of the mechanical stimuli within some calcium phosphate-based scaffolds in terms of stress and strain distributions in the solid material phase and fluid velocity, fluid pressure and fluid shear stress distributions in the pores filled of fluid, by means of micro computed tomographed (CT)-based finite element (FE) models. Two samples of porous materials, one of calcium phosphate-based cement and another of biodegradable glass, were used. Compressive loads equivalent to 0.5% of compression applied to the solid material phase and interstitial fluid flows with inlet velocities of 1, 10 and 100 microm/s applied to the interconnected pores were simulated, changing also the inlet side and the viscosity of the medium. Similar strain distributions for both materials were found, with compressive and tensile strain maximal values of 1.6% and 0.6%, respectively. Mean values were consistent with the applied deformation. When 10 microm/s of inlet fluid velocity and 1.45 Pas viscosity, maximal values of fluid velocity were 12.76 mm/s for CaP cement and 14.87 mm/s for glass. Mean values were consistent with the inlet ones applied, and mean values of shear stress were around 5 x 10(-5)Pa. Variations on inlet fluid velocity and fluid viscosity produce proportional and independent changes in fluid velocity, fluid shear stress and fluid pressure. This study has shown how mechanical loads and fluid flow applied on the scaffolds cause different levels of mechanical stimuli within the samples according to the morphology of the materials.     

Osteogenin, a bone morphogenetic protein, adsorbed on porous hydroxyapatite substrata, induces rapid bone differentiation in calvarial defects of adult primates.

Osteogenin, a bone morphogenetic protein, in conjunction with insoluble collagenous bone matrix initiates local endochondral bone differentiation by induction in vivo. This study, by exploiting the affinity of native osteogenin for hydroxyapatite, was designed to construct a delivery system for the expression of the biologic activity of osteogenin in nonhealing calvarial defects of adult primates. After exposure of the calvaria, 64 cranial defects, 25 mm in diameter, were prepared in 16 adult male baboons (Papio ursinus). Defects were implanted with disks of porous nonresorbable and resorbable hydroxyapatite substrata obtained after hydrothermal conversion of calcium carbonate exoskeletons of corals. In each animal, one disk of each hydroxyapatite preparation was treated with osteogenin isolated and purified from baboon bone matrix after sequential chromatography on heparin-Sepharose, hydroxyapatite, and Sephacryl S-200 gel filtration columns. The remaining two defects were implanted with one disk of each hydroxyapatite preparation without osteogenin as control. Histomorphometry on decalcified sections prepared on days 30 and 90 showed superior osteogenesis in osteogenin-treated nonresorbable hydroxyapatite specimens as compared with controls. On day 90, substantial bone formation also had occurred in control nonresorbable hydroxyapatite specimens. On day 90, but not on day 30, significantly greater amounts of bone had formed in osteogenin-treated resorbable specimens as compared with resorbable controls. Overall, resorbable substrata performed poorly when compared with nonresorbable substrata, perhaps due to a premature dissolution of the implants. These results provide evidence that the biologic activity of osteogenin can be restored and delivered by a substratum other than the organic collagenous matrix, inducing rapid bone differentiation in calvarial defects of adult nonhuman primates. The adsorption strategy of osteogenin on porous inorganic nonimmunogenic substrata may help to design appropriate osteogenic delivery systems for craniofacial and orthopedic applications in humans.     

RGD-conjugated copolymer incorporated into composite of poly(lactide-co-glycotide) and poly(L-lactide)-grafted nanohydroxyapatite for bone tissue engineering

Various surface modification methods of RGD (Arg-Gly-Asp) peptides on biomaterials have been developed to improve cell adhesion. This study aimed to examine a RGD-conjugated copolymer RGD/MPEG-PLA-PBLG (RGD-copolymer) for its ability to promote bone regeneration by mixing it with the composite of poly(lactide-co-glycotide) (PLGA) and hydroxyapatite nanoparticles surface-grafted with poly(L-lactide) (g-HAP). The porous scaffolds were prepared using solvent casting/particulate leaching method and grafted to repair the rabbit radius defects after seeding with autologous bone marrow mesenchymal cells (MSCs) of rabbits. After incorporation of RGD-copolymer, there were no significant influences on scaffold's porosity and pore size. Nitrogen of RGD peptide, and calcium and phosphor of g-HAP could be exposed on the surface of the scaffold simultaneously. Although the cell viability of its leaching liquid was 92% that was lower than g-HAP/PLGA, its cell adhesion and growth of 3T3 and osteoblasts were promoted significantly. The greatest increment in cell adhesion ratios (131.2-157.1% higher than g-HAP/PLGA) was observed when its contents were 0.1-1 wt % but only at 0.5 h after cell seeding. All the defects repaired with the implants were bridged after 24 weeks postsurgery, but the RGD-copolymer contained composite had larger new bone formation and better fusion interface. The composites containing RGD-copolymer enhanced bone ingrowth but presented more woven bones than others. The combined application of RGD-copolymer and bone morphological protein 2 (BMP-2) exhibited the best bone healing quality and was recommended as an optimal strategy for the use of RGD peptides.     

Spark plasma sintering synthesis of porous nanocrystalline titanium alloys for biomedical applications

The reason for the extended use of titanium and its alloys as implant biomaterials stems from their lower elastic modulus, their superior biocompatibility and improved corrosion resistance compared to the more conventional stainless steel and cobalt-based alloys [Niinomi, M., Hattori, T., Niwa, S., 2004. Material characteristics and biocompatibility of low rigidity titanium alloys for biomedical applications. In: Jaszemski, M.J., Trantolo, D.J., Lewandrowski, K.U., Hasirci, V., Altobelli, D.E., Wise, D.L. (Eds.), Biomaterials in Orthopedics. Marcel Dekker Inc., New York, pp. 41-62]. Nanostructured titanium-based biomaterials with tailored porosity are important for cell-adhesion, viability, differentiation and growth. Newer technologies like foaming or low-density core processing were recently used for the surface modification of titanium alloy implant bodies to stimulate bone in-growth and improve osseointegration and cell-adhesion, which in turn play a key role in the acceptance of the implants. We here report preliminary results concerning the synthesis of mesoporous titanium alloy bodies by spark plasma sintering. Nanocrystalline cp Ti, Ti-6Al-4V, Ti-Al-V-Cr and Ti-Mn-V-Cr-Al alloy powders were prepared by high-energy wet-milling and sintered to either full-density (cp Ti, Ti-Al-V) or uniform porous (Ti-Al-V-Cr, Ti-Mn-V-Cr-Al) bulk specimens by field-assisted spark plasma sintering (FAST/SPS). Cellular interactions with the porous titanium alloy surfaces were tested with osteoblast-like human MG-63 cells. Cell morphology was investigated by scanning electron microscopy (SEM). The SEM analysis results were correlated with the alloy chemistry and the topographic features of the surface, namely porosity and roughness.     

Flow rates in perfusion bioreactors to maximise mineralisation in bone tissue engineering in vitro

In bone tissue engineering experiments, fluid-induced shear stress is able to stimulate cells to produce mineralised extracellular matrix (ECM). The application of shear stress on seeded cells can for example be achieved through bioreactors that perfuse medium through porous scaffolds. The generated mechanical environment (i.e. wall shear stress: WSS) within the scaffolds is complex due to the complexity of scaffold geometry. This complexity has so far prevented setting an optimal loading (i.e. flow rate) of the bioreactor to achieve an optimal distribution of WSS for stimulating cells to produce mineralised ECM. In this study, we demonstrate an approach combining computational fluid dynamics (CFD) and mechano-regulation theory to optimise flow rates of a perfusion bioreactor and various scaffold geometries (i.e. pore shape, porosity and pore diameter) in order to maximise shear stress induced mineralisation. The optimal flow rates, under which the highest fraction of scaffold surface area is subjected to a wall shear stress that induces mineralisation, are mainly dependent on the scaffold geometries. Nevertheless, the variation range of such optimal flow rates are within 0.5–5 mL/min (or in terms of fluid velocity: 0.166–1.66 mm/s), among different scaffolds. This approach can facilitate the determination of scaffold-dependent flow rates for bone tissue engineering experiments in vitro, avoiding performing a series of trial and error experiments.     

Symbiosio of biotechnology and biomaterials: Applications in tissue engineering of bone and cartilage

The three ingredients for the successful tissue engineeping of bone and cartilage are ragulatory signals, cells and extracellular matrix. Recent advance in cellular and molecular biology of thde growth and differentiation factors have set the stage for a symbiosis of biotechnology and biomaterials. Recent advances permit one to enunciate the rules of architechure for tissue engineering of bone and cartilage. The purification and cloning of bone morphogenetic proteins (BMPs) and growth factors such as platelet derived growth factors (PDGF), tranforming growth factor-β (TGF-β), and insulin-like growth factors (IGF-I) Will allow the design of an optimal combinatiol of signals to initiate and promote development of skeletal stem cells into cartilage and bone. Successful and optimal bone and motion. BMPs function as inductive signals. Biomaterials (Both natural and synthetic) mimic the extracellular matrix and play a role in conduction of bone and cartiage. Examples of biomaterials include hydroxyapatite, polyanhydrides, polyphosphoesters, polylactic acid, and polyglycolic acid. The prospects for novel biomaterials are immense, and they likely will be a fertile erowth industpy. Cooperative ventures between academia and industry and teahnology transfer from the federal government augur well for an exciting future fop clinical applications.