Production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from Kimchi

Lactococcus lactis subsp. lactis A164 was isolated from Kimchi (Korean traditional fermented vegetables). The bacteriocin produced by strain A164 was active against closely related lactic acid bacteria and some food-borne pathogens including Staphylococcus aureus, Listeria monocytogenes and Salmonella typhimurium. The antimicrobial spectrum was nearly identical to that of nisin. Bacteriocin activity was not destroyed by exposure to elevated temperatures at low pH values, but the activity was lost at high pH values. This bacteriocin was inactivated by pronase E and alpha, beta-chymotrypsin, but not by trypsin, pepsin, and alpha-amylase. Cultures of L. lactis subsp. lactis A164 maintained at a constant pH of 6.0 exhibited maximum production of the bacteriocin. It was purified to homogeneity by ammonium sulphate precipitation, sequential ion exchange chromatography, and ultrafiltration. Tricine-SDS-PAGE of purified bacteriocin gave the same molecular weight of 3.5 kDa as that of nisin. The gene encoding this bacteriocin was amplified by PCR with nisin gene-specific primers and sequenced. It showed identical sequences to the nisin gene. These results indicate that bacteriocin produced by Lactococcus lactis A164 is a nisin-like bacteriocin.     

Effect of medium components on bacteriocin production by Lactobacillus plantarum strains ST23LD and ST341LD, isolated from spoiled olive brine

Bacteriocin ST23LD levels of 2930AU/OD were recorded in MRS broth (pH of 6.5) and in the presence of tryptone and yeast extract as sole nitrogen sources. Growth in MRS broth at an initial pH of 6.0 yielded only 1460AU/OD bacteriocin ST23LD. Activities of 5861AU/OD were recorded with maltose (20, 30 and 40 g/l) as sole carbon source and 9036AU/OD with the addition of 2.0-10.0 g/l KH2PO4. Bacteriocin ST341LD levels of 2850 and 2841AU/OD were recorded in MRS broth at an initial pH of 6.0 or 5.5, respectively. Only 709AU/OD was recorded in the same medium with an initial pH of 6.5. Bacteriocin ST341LD production was stimulated by the presence of tryptone. However, glucose at 10 and 40 g/l, or the presence of 5.0 or 10.0 g/l K2HPO4, resulted in a 50% reduction of bacteriocin activity. Glycerol in the growth medium repressed bacteriocin production. No increased bacteriocin production was recorded in medium supplemented with vitamins.     

Utilization of UF-permeate for production of beta-galactosidase by lactic acid bacteria

Four lactobacilli strains (Lactobacillus bulgaricus, Lactobacillus acidophilus, Lactobacilus casei and Lactobacillus reuteri) were grown in MRS broth and three lactococci strains (Streptococcus thermophilus, Lactococcus lactis subsp. Lactis and Lactococcus lactis subsp. lactis biovar. diacetilactis) were grown in M17 broth. L. reuteri and S. thermophilus were chosen on the basis of the best mean beta-galactosidase activity of 10.44 and 10.01 U/ml respectively, for further studies on permeate-based medium. The maximum production of beta-galactosidase by L. reuteri was achieved at lactose concentration of 6%, initial pH 5.0-7.5, ammonium phosphate as nitrogen source at a concentration of 0.66 g N/L and incubation temperature at 30 degrees C/24 hrs to give 6.31 U/ml. While in case of S. thermophilus, maximum beta-galactosidase production was achieved at 10% lactose concentration of permeate medium, supplemented with phosphate buffer ratio of 0.5:0.5 (KH2PO4:K2HPO4, g/L), at initial pH 6.0-6.5, ammonium phosphate (0.66g N/L) as nitrogen source and incubation temperature 35 degrees C for 24 hrs to give 7.85 U/ml.     

Influence of pH on growth and bacteriocin production byLactococcus lactis subsp.lactis 14ONWC during batch fermentation

The influence of pH on growth, and lactic acid and bacteriocin production byLactococcus lactis subsp.lactis 140 NWC was studied during batch fermentation in a lactose-based complex medium. Growth and lactic acid production were modelled using a simple logistic equation while substrate consumption was found to be a function growth and lactic acid production rate. The optimal pH for growth and lactic acid production was between 6.0 and 6.5. Bacteriocin production showed primary metabolite kinetics. pH had a dramatic effect on the production of the bacteriocin, lactococcin 140. A maximum activity of 15.4 × 10⁶ AU (arbitrary units) 1^–1 was obtained after 7 h at pH 5.5. Maximum bacteriocin activity was achieved before the end of growth and was followed by a decrease in activity, which was due to adsorption to the cells of the producing organism, possibly followed by degradation by specific proteases. Both bacteriocin production and degradation rates were higher at pH 5.0 and 5.5, resulting in sharper activity peaks than at pH 6.0 or 6.5. On the basis of the experimental results a qualitative model for bacteriocin production is proposed.     

Batch cultures of recombinant Lactococcus lactis subsp. lactis in a stirred fermentor

The effect of plasmid introduction into Lactococcus lactis subsp. lactis IL2661 on the growth of this strain and on plasmid stability was studied in pure batch cultures. The plasmids used (coding for erythromycin or chloramphenicol resistance) were the following: pIL205 (42 kb), pIL252 (4.6 kb, 6-9 copies), pIL253 (4.8 kb, 45-85 copies) and pE194 (inserted in the chromosome). Growth and acidification of L. lactis subsp. lactis IL2661 were similar to those of the derived recombinant lactococci. The maximal population at the end of the fermentation (9 h) was about 1.1 +/- 0.3 x 10(10) cfu/ml, and maximal growth rate 0.92 +/- 0.07 h-1. Growth yield and lactic acid concentrations were 3.9 +/- 0.8 x 10(11) cfu/g lactose consumed and 25.6 +/- 2.3 g/l, respectively. Different levels of plasmid stability were detected. Plasmid pE194, and plasmids pIL252 and pIL253 in the absence of pIL205, were stable after 10 h of culture. A slight loss (1-2%) of pIL205 was observed in all strains. In the presence of pIL205, plasmids pIL252 and pIL253 were maintained in only 56-95% of the cells. This result suggested an incompatibility between pIL205 and pIL252 or pIL253.     

Protoplast-induced curing of bacteriocin plasmid in Lactococcus lactis subsp. lactis 484

Plasmid-specified traits like lactose metabolism and bacteriocin production could be eliminated from Lactococcus lactis subsp. lactis 484 culture during production and regeneration of protoplasts with lysozyme at the concentration of 300 μg/ml after 3 h treatment. Plasmid-free strains and cured derivatives harbouring only a single plasmid (2 MDa) were also obtained. Loss of high molecular weight (65 MDa) low copy number Lac plasmid occurred more frequently compared with low molecular weight (2 MDa) high copy number plasmid. Treatment of L. lactis subsp. lactis 484 cells with lysozyme at concentrations of 1000 μg/ml could produce a large number of Lac⁻ Bac⁻ variants at a very high frequency (94%). The curing data confirmed the linkage of Lac and Bac phenotypes to 65 and 2 MDa plasmids, respectively.     

Optimization of polyhydroxybutyrate production from a wild type and two mutant strains of Rhodobacter sphaeroides using statistical method

Interaction studies using central composite design (CCD) gave the optimum concentrations of acetate at 4 g l(-1) and (NH4)2SO4 at 0.01 g l(-1) with an optimum temperature of 35 degrees C. Rhodobacter sphaeroides N20 gave the highest PHB (7.8 g l(-1)) and biomass (DCW) (8.2 g l(-1)) values compared to the wild type strain and the mutant strain U7. The CCD results predicted that the optimum medium for the mutant strain N20 consisted of 3.90 g l(-1) acetate, 0.01 g l(-1) (NH4)2SO4 at 33.5 degrees C (R2=0.985). Validation of this model by culturing the mutant strain in this optimum medium exhibited similar values of PHB (7.76 g l(-1)), biomass (8.32 g l(-1)) and the PHB content in the cell 93.2% of DCW. Similar amounts of PHB were also obtained in batch fermentations using a 5-l bioreactor. The effect of pH and aeration rate was also studied and the optimum values were found to be pH 7.0 with an aeration rate of 1.0 vvm. Under these optimal conditions, strain N20 produced the highest amount of PHB production (8.76 g l(-1)), PHB content (95.4% of DCW) as well as the product yield (Yp/x) (0.72). These results are the highest values ever obtained from photosynthetic bacteria reported so far.     

Influence of pH,temperature and culture media on the growth and bacteriocin production by vaginal Lactobacillus salivarius CRL 1328

AIMS: To study the influence of pH, temperature and culture medium on the growth and bacteriocin production by vaginal Lactobacillus salivarius subsp. salivarius CRL 1328. METHODS AND RESULTS: The study was performed using a complete factorial experimental design. Lactobacillus salivarius was cultivated in LAPTg and MRS broths, adjusted to specific initial pH, and at different temperatures of incubation. The growth, which was evaluated by the Gompertz model, was higher in MRS broth than in LAPTg broth. The initial pH of the culture medium and the temperature had a dramatic effect on the production of bacteriocin. The optimal conditions for bacteriocin production were different to those for optimal growth. The decrease in the pH of the culture medium was parallel to the growth; pH had similar final values in both the MRS and the LAPTg broths. CONCLUSIONS: The optimal growth conditions were recorded in MRS broth, with an initial pH of 6.5 and a temperature of 37 degrees C. The maximum bacteriocin activity was obtained in LAPTg after 6 h at 37 degrees C, and at an initial pH of 6.5 or 8.0. SIGNIFICANCE AND IMPACT OF THE STUDY: The application of a complete factorial design, and the evaluation of the growth parameters through the Gompertz model, enabled a rapid and simultaneous exploration of the influence of pH, temperature and growth medium on both growth and bacteriocin production by vaginal Lact. salivarius CRL 1328.     

Optimization of enterocin P production by batch fermentation of Enterococcus faecium P13 at constant pH

The influence of pH on growth, enterocin P production and glucose consumption by Enterococcus faecium P13 was studied during anaerobic batch fermentation in MRS broth at 32 degrees C in a fermentor. Growth and glucose consumption were maximal at pH 7.0. Enterocin P production displayed primary metabolite kinetics and was strongly dependent on pH. A maximum antimicrobial activity of 1,949 bacteriocin units (BU) ml(-1) was obtained at pH 6.0, which represented a four-fold increase compared with the antimicrobial activity obtained without pH regulation. The pH exerted a marked effect on the decrease in bacteriocin activity, with the decrease being maximal at pH 7.0. In this report, we propose models for the growth of E. faecium P13 as well as enterocin P production and inactivation. Enterocin P production decreased when potentially stress-inducing compounds (NaCl or ethanol) were included in the growth medium.     

Identification and characteristics of nisin Z-producing Lactococcus lactis subsp. lactis isolated from Kimchi

We isolated bacteriocin-producing Lactococcus lactis subsp. lactis from Kimchi. The bacteriocin inhibited strains of Clostridium perfringens, C. difficile, Listeria monocytogenes, vancomycin-resistant Enterococcus, and one out of four methicillin-resistant Staphylococcus aureus strains, as well as some closely related lactic acid bacteria. In tricine-SDS-PAGE, the bacteriocin migrated with an apparent molecular weight of about 4 kDa to the same location as nisin A and crude nisin Z. The gene encoding this bacteriocin was found to be identical to that of nisin Z with direct PCR sequence methods. The inhibitory activity was stable against heat and pH, but it was lost at 100 degrees C for 1 h and at 121 degrees C for 15 min. The bacteriocin was inactivated by proteolytic enzymes, but was not affected by lysozyme, lipase, catalase, or beta-glucosidase. There were some differences in characteristics from those of nisins described previously.     

Influence of the lactose plasmid on the metabolism of galactose by Streptococcus lactis.

Streptococcus lactis strain DR1251 was capable of growth on lactose and galactose with generation times, at 30 degrees C, of 42 and 52 min, respectively. Phosphoenolpyruvate-dependent phosphotransferase activity for lactose and galactose was induced during growth on either substrate. This activity had an apparent K(m) of 5 x 10(-5) M for lactose and 2 x 10(-2) M for galactose. beta-d-Phosphogalactoside galactohydrolase activity was synthesized constitutively by these cells. Strain DR1251 lost the ability to grow on lactose at a high frequency when incubated at 37 degrees C with glucose as the growth substrate. Loss of ability to metabolize lactose was accompanied by the loss of a 32-megadalton plasmid, pDR(1), and Lac(-) isolates did not revert to a Lac(+) phenotype. Lac(-) strains were able to grow on galactose but with a longer generation time. Galactose-grown Lac(-) strains were deficient in beta-d-phosphogalactoside galactohydrolase activity and phosphoenolpyruvate phosphotransferase activity for both lactose and galactose. There was also a shift from a predominantly homolactic to a heterolactic fermentation and a fivefold increase in galactokinase activity, relative to the Lac(+) parent strain grown on galactose. These results suggest that S. lactis strain DR1251 metabolizes galactose primarily via the tagatose-6-phosphate pathway, using a lactose phosphoenolpyruvate phosphotransferase activity to transport this substrate into the cell. Lac(-) derivatives of strain DR1251, deficient in the lactose phosphoenolpyruvate phosphotransferase activity, appeared to utilize galactose via the Leloir pathway.     

Ethanol production by Kluyveromyces lactis immobilized cells in copolymer carriers produced by radiation polymerization

The conditions for batch and continuous production of ethanol, using immobilized growing yeast cells of Kluyveromyces lactis, have been optimized. Yeast cells have been immobilized in hydrogel copolymer carriers composed of polyvinyl alcohol (PVA) with various hydrophilic monomers, using radiation copolymerization technique. Yeast cells were immobilized through adhesion and multiplication of yeast cells themselves. The ethanol production of immobilized growing yeast cells with these hydrogel carriers was related to the monomer composition of the copolymers and the optimum monomer composition was hydroxyethyl methacrylate (HEMA). In this case by using batch fermentation, the superior ethanol production was 32.9 g L(-1) which was about 4 times higher than that of cells in free system. The relation between the activity of immobilized yeast cells and the water content of the copolymer carriers was also discussed. Immobilized growing yeast cells in PVA: HEMA (7%: 10%, w/w) hydrogel copolymer carrier, were used in a packed-bed column reactor for the continuous production of ethanol from lactose at different levels of concentrations (50, 100 and 150) g L(-1). For all lactose feed concentrations, an increase in dilution rates from 0.1 h(-1) to 0.3 h(-1) lowered ethanol concentration in fermented broth, but the volumetric ethanol productivity and volumetric lactose uptake rate were improved. The fermentation efficiency was lowered with the increase in dilution rate and also at higher lactose concentration in feed medium and a maximum of 70.2% was obtained at the lowest lactose concentration 50 g L(-1).     

A continuous lactic acid production system using an immobilized packed bed of Lactobacillus helveticus

A 5 l packed bed bioreactor was used to study the effect of initial lactose concentration and hydraulic retention time (HRT) on cell growth, lactose utilization and lactic acid production. Up to 95% of the initial lactose concentration was utilized at longer HRTs (30-36 h). The study showed that lactic acid production increased with increases in HRT (12-36 h) and initial lactose concentrations. The highest lactic acid production rate (3.90 g l(-1) h(-1)) was obtained with an initial lactose concentration of 100 g/l and an HRT of 18 h, whereas the lowest lactic acid production rate (1.35 g l(-1) h(-1)) was obtained with an initial lactose concentration of 50 g/l and an HRT of 36 h. This suggested that optimal lactic acid production can be achieved at an HRT of 18 h and initial lactose concentration of 100 g/l.     

High nisin Z production by Lactococcus lactis UL719 in whey permeate with aeration

The influence of controlled pH (5.0–6.5) and initial dissolved oxygen level (0–90% air saturation) on nisin Z production in a yeast extract/Tween 80-supplemented whey permeate (SWP) was examined during batch fermentations with citrate positive Lactococcus lactis subsp. lactis UL719. The total activity corresponding to the sum of soluble and cell-bound activities, as measured by a critical dilution method, was more than 50% lower at pH 5.0 than in the range 5.5–6.5, although the specific production decreased as pH increased. A maximum nisin Z activity of 8200 AU/ml (4100IU/ml) was observed in the supernatant after 8h of culture for pH ranging from 5.5 to 6.5. Prolonging the culture beyond 12h decreased this activity at pH 6.0 and 6.5 but not at pH 5.5 or 5.0. A corresponding increase in cell-bound activity was probably due to adsorption of soluble bacteriocin to the cell wall. Aeration increased cell-bound and total activity to maximum values of 32800 and 41000 AU/ml (16400 and 20500IU/ml), respectively, with an initial level of 60% air saturation after 24h of incubation at pH 6.0. The specific production at 60% or 90% initial air saturation was eight-fold higher than at 0%.     

Optimization of submerged culture condition for the production of mycelial biomass and exopolysaccharides by Agrocybe cylindracea

The optimization of submerged culture conditions and nutritional requirements was studied for the production of exopolysaccharide (EPS) from Agrocybe cylindracea ASI-9002 using the statistically based experimental design in a shake flask culture. Both maximum mycelial biomass and EPS were observed at 25 degrees C. The optimal initial pH for the production of mycelial biomass and EPS were found to be pH 4.0 and pH 6.0, respectively. Subsequently, optimum concentration of each medium component was determined using the orthogonal matrix method. The optimal combination of the media constituents for mycelial growth was as follows: maltose 80 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 1.4 g/l, and CaCl2 1.1 g/l; for EPS production: maltose 60 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 0.9 g/l, and CaCl2 1.1 g/l. Under the optimal culture condition, the maximum EPS concentration achieved in a 5-l stirred-tank bioreactor indicated 3.0 g/l, which is about three times higher than that at the basal medium.     

Growth optimization of Pediococcus damnosus NCFB 1832 and the influence of pH and nutrients on the production of pediocin PD-1

AIMS: Optimization of the growth of Pediococcus damnosus NCFB 1832 and the production of pediocin PD-1 by traditional fermentation methods. METHODS AND RESULTS: Fermentation studies were conducted in De Man Rogosa and Sharpe (MRS) broth (Oxoid), preadjusted to specific pH values, and in MRS broth supplemented with various nitrogen sources, MnSO4, MgSO4 and Tween 80. The production of pediocin PD-1 closely followed the growth curve of Ped. damnosus NCFB 1832. Maximum levels of bacteriocin activity (3249 AU ml(-1)/O.D.max) were recorded in MRS broth with an initial pH of 6.7. In media with an initial pH of 4.5 bacteriocin activity as low as 222 AU ml(-1)/O.D.max was recorded. The highest bacteriocin activity was recorded in growth conditions allowing the greatest pH variation (highest DeltapH). The addition of bacteriological peptone (1.7%, w/v), MnSO4 (0.014%, w/v) and Tween 80 (3%, v/v) to MRS and adjustment of the medium pH to 6.7 resulted in a further increase in activity (from 3249 to 5078 AU ml(-1)/O.D.max). The same medium, but with an initial pH of 6.2, resulted in an 82.5% decrease in bacteriocin activity. CONCLUSIONS: Pediocin PD-1 production is not only stimulated by the presence of specific growth factors (e.g., bacteriological peptone, MnSO4 or Tween 80), but may also be stimulated by the lowering in pH during growth (highest DeltapH), and thus also the amount of organic acids produced. SIGNIFICANCE AND IMPACT OF THE STUDY: The production of pediocin PD-1 by the wild-type producer strain was significantly improved by using a defined medium and traditional fermentation methods.     

Optimization of submerged culture conditions for the mycelial growth and exo-biopolymer production by Cordyceps militaris

AIMS: The objective of the present study was to determine the optimal culture conditions for exo-biopolymer production by Cordyceps militaris in shake flask culture. METHODS AND RESULTS: The optimal temperature and initial pH for both mycelial growth and exo-biopolymer production by Cordyceps militaris in shake flask culture were found to be 20 degrees C and 6.0, respectively. Sucrose (40 g x l(-1)) and corn steep powder (10 g x l(-1)) were the most suitable carbon and nitrogen source for both mycelial growth and exo-biopolymer production. CONCLUSION: Under optimal culture conditions, the maximum exo-biopolymer concentration in a 5-l jar fermenter indicated 10.3 g x l(-1), which was approximately three times higher than that in shake flask culture. SIGNIFICANCE AND IMPACT OF THE STUDY: This process can have a significant impact on the industrial scale when sucrose and corn steep powder were used as carbon and nitrogen source.     

Isolation, screening and characterization of bacteriocin-producing lactic acid bacteria isolated from traditional fermented food

100 lactic acid bacterial strains isolated from traditional fermented foods (yoghurt, milk cream, sour dough and milk) were screened for bacteriocin production. Twenty six strains producing a nisin-like bacteriocin were selected. Most of these isolates gave only a narrow inhibitory spectrum, although one showed a broad inhibitory spectrum against the indicator strains tested, this strain was determined as Lactococcus lactis. The influence of several parameters on the fermentative production of nisin by Lactococcus lactis was studied. Production of nisin was optimal at 30 degrees C and in the pH range 5.5-6.3. The effect of different sulphur and nitrogen sources on Lactococcus lactis growth and nisin production was studied. Magnesium sulfate and manganese sulfate were found to be the best sulphur sources while triammonium citrate was the best inorganic nitrogen source and meat extract, peptone and yeast extract were the best organic nitrogen source for nisin production.     

离子束注入提高Trichosporon lactis T立体拆分布洛芬水平的研究

以从土壤中分离筛选到的可立体选择性水解布洛芬乙酯生成S-布洛芬的菌株Trichosporon lactisT为出发菌株,对其进行能量30KeV,剂量1×1015~5×1015ions/cm2的低能N 注入,筛选立体选择性水解布洛芬乙酯活性高的诱变株。菌株T.lactisT,在4×1015ions/cm2的诱变剂量下突变率最高,正向和负向突变率分别达32.9%和37.1%,因此选定该剂量为T.lactisT的最佳N 离子注入剂量。经离子束诱变,通过初筛和复筛,共筛选到7株水解布洛芬乙酯的高产菌株,其中诱变株K1培养24h时酶活力比出发菌株T高50%,且具有较好的遗传稳定性。将菌株K1和出发菌株T培养24h,分别加入布洛芬乙酯水解24h,二者水解布洛芬乙酯生成S-布洛芬旋光度均为 54.1°,对映体过量值ee%均为98%,K1菌株水解的产量达6.96g/L,而出发株仅为4.24g/L。     

Bacteriocin production by strain <Emphasis Type="Italic">Lactobacillus delbruecki</Emphasis>i ssp. <Emphasis Type="Italic">bulgaricus</Emphasis> BB18 during continuous prefermentation of yogurt starter culture and subsequent batch coagulation of milk

By screening for bacteriocin-producing lactic acid bacteria of 1,428 strains isolated from authentic Bulgarian dairy products, Lb. bulgaricus BB18 strain obtained from kefir grain was selected. Out of 11 yogurt starters containing Lb. bulgaricus BB18 and S. thermophilus strains resistant to bacteriocin secreted by Lb. bulgaricus BB18 a yogurt culture (S. thermophilus 11A+Lb. bulgaricus BB18) with high growth and bacteriocinogenic activity in milk was selected. Continuous (pH-stat 5.7) prefermentation processes were carried out in milk at 37 degrees C in a 2l MBR bioreactor (MBR AG, Zurich, Switzerland) with an IMCS controller for agitation speed, temperature, dissolved oxygen, CO2 and pH. Prefermented milk with pH 5.7 coagulated in a thermostat at 37 degrees C until pH 4.8-4.9. S. thermophilus 11A and Lb. bulgaricus BB18 grew independently in a continuous mode at similar and sufficiently high-dilution rates (D=1.83 h(-1)-S. thermophilus 11A; D=1.80 h(-1)-Lb. bulgaricus BB18). The yogurt cultures developed in a stream at a high-dilution rate (D=2.03-2.28 h(-1)). The progress of both processes (growth and bacteriocin production) depended on the initial ratio between the two microorganisms. The continuous prefermentation process promoted conditions for efficient fermentation and bacteriocinogenesis of the starter culture during the batch process: strong reduction of the times for bacteriocin production and coagulation of milk (to 4.5-5.0 h); high cell productivity (lactobacilli-4x10(12) CFU ml(-1), streptococci-6x10(12) CFU ml(-1)); high productivity of bacteriocins (4,500 BU ml(-1))-1.7 times higher than the bacteriocinogenic activity of the batch starter culture.