Synthesis, characterization, and evaluation as transfection reagents of double-hydrophilic star copolymers: effect of star architecture

Five star polymers of the ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic methoxy hexa(ethylene glycol) methacrylate (HEGMA) were prepared by group transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as coupling agent. In particular, four isomeric star copolymers, one heteroarm, two star block and one statistical star, with 90% mol DMAEMA and 10% mol HEGMA, plus one star homopolymer of DMAEMA with degrees of polymerization of the arms equal to 20 were synthesized. The polymers were characterized in terms of their molar masses (MMs) and compositions using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The hydrodynamic diameters in water indicated some aggregation for all the star polymers except for the statistical copolymer star, while the pK values of the DMAEMA units were around 7 for all star polymers. All the star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. All four star copolymers showed decreased toxicity compared to that of the DMAEMA star homopolymer for the same amounts of star polymer tested. The star block copolymer with outer DMAEMA blocks exhibited the highest overall transfection efficiency, 11%, compared to that of all the star polymers examined in this study. This efficiency was the same as that of the commercially available transfection reagent SuperFect.     

Synthesis and self-assembly of well-defined poly(amino acid) end-capped poly(ethylene glycol) and poly(2-methyl-2-oxazoline)

Poly(ethylene glycol) (PEG) and poly(2-methyl-2-oxazoline) (PMOx) are water-soluble, biocompatible polymers with stealth hemolytic activities. Poly(amino acid) (PAA) end-capped PEG and PMOx were prepared using amino-terminated derivatives of PEG and PMOx as macroinitiators for the ring-opening polymerization of γ-benzyl protected l-glutamate N-carboxyanhydride and S-benzyloxycarbonyl protected l-cysteine N-carboxyanhydride, respectively, in the presence of urea, at room temperature. The molecular weight of the PAA moiety was kept between M(n) = 2200 and 3000 g mol(-1). PMOx was polymerized by cationic ring-opening polymerization resulting in molecular weights of M(n) = 5000 and 10,000 g mol(-1), and PEG was a commercial product with M(n) = 5000 g mol(-1). Here, we investigate the self-assembly of the resulting amphiphilic block copolymers in water and the effect of the chemical structure of the block copolymers on the solution properties of self-assembled nanostructures. The PEG-block-poly(amino acid), PEG-b-PAA, and PMOx-block-poly(amino acid), PMOx-b-PAA, block copolymers have a narrow and monomodal molecular weight distribution (PDI < 1.3). Their self-assembly in water was studied by dynamic light scattering and fluorescence spectroscopy. In aqueous solution, the block copolymers associate into particles with hydrodynamic radii (R(H)) ranging in size from R(H) 70 to 130 nm, depending on the block copolymer architecture and the polymer molecular weight. Larger R(H) and critical association concentration values were obtained for copolymers containing poly(S-benzyloxycarbonyl-l-cysteine) compared to their poly(γ-benzyl-L-glutamate) analogue. FTIR investigations revealed that the poly(γ-benzyl-L-glutamate) block adopts a helical conformation, while the poly(S-benzyloxycarbonyl-L-cysteine) block exists as β-sheet.     

Synthesis of well-defined amphiphilic block copolymers having phospholipid polymer sequences as a novel biocompatible polymer micelle reagent

To realize safer and effective drug administration, novel well-defined and biocompatible amphiphilic block copolymers containing phospholipid polymer sequences were synthesized. At first, the homopolymer of 2-methacryloyloxyethylphosphorylcholine (MPC) was synthesized in water by reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization. The "living" polymerization was confirmed by the fact that the number-average molecular weight increased linearly with monomer conversion while the molecular weight distribution remained narrow independent of the conversion. The poly(MPC) thus prepared is end-capped with a dithioester moiety. Using the dithioester-capped poly(MPC) as a macro chain transfer agent, AB diblock copolymers of MPC and n-butyl methacrylate (BMA) were synthesized. Associative properties of the amphiphilic block copolymer (pMPC(m)-BMA(n)) with varying poly(BMA) block lengths were investigated using NMR, fluorescence probe, static light scattering (SLS), and quasi-elastic light scattering (QELS) techniques. Proton NMR data in D2O indicated highly restricted motions of the n-butyl moieties, arising from hydrophobic associations of poly(BMA) blocks. Fluorescence spectra of N-phenyl-1-naphthylamine indicated that the probes were solubilized in the polymer micelles in water. The formation of polymer micelles comprising a core with poly(BMA) blocks and shell with hydrophilic poly(MPC) blocks was suggested by SLS and QELS data. The size and mass of the micelle increased with increasing poly(BMA) block length. With an expectation of a pharmaceutical application of pMPC(m)-BMA(n), solubilization of a poorly water-soluble anticancer agent, paclitaxel (PTX), was investigated. PTX dissolved well in aqueous solutions of pMPC(m)-BMA(n) as compared with pure water, implying that PTX is incorporated into the hydrophobic core of the polymer micelle. Since excellent biocompatible poly(MPC) sequences form an outer shell of the micelle, pMPC(m)-BMA(n) may find application as a promising reagent to make a good formulation with a hydrophobic drug.     

Synthesis, swelling behavior, and biocompatibility of novel physically cross-linked polyurethane-block-poly(glycerol methacrylate) hydrogels

Physically cross-linked novel block copolymer hydrogels with tunable hydrophilic properties for biomedical applications were synthesized by controlled radical polymerization of polyurethane macroiniferter and (2,2-dimethyl-1,3-dioxolane) methyl methacrylate. The block copolymers were converted to hydrogels by the selective hydrolysis of poly[(2,2-dimethyl-1,3-dioxolane) methyl methacrylate] block to poly(glycerol methacrylate). The block copolymerization has been monitored by monomer conversion and molecular weight increase as a function of time. It was observed that the polymerization proceeded with a characteristic "living" behavior where both monomer conversion and molecular weight increased linearly, with increasing reaction time. The resulting hydrogels were investigated for their equilibrium water content (EWC), dynamic water contact angles, swelling kinetics, thermodynamic interaction parameters, plasma protein adsorption, and platelet adhesion. Similar to our previous mechanically responsive hydrogels (Mequanint, K.; Sheardown, H. J. Biomater. Sci. Polym. Ed. 2005, 10, 1303-1318), the present results indicated that block copolymer hydrogels have excellent hydrophilicity and swelling behavior with improved modulus of elasticity. The equilibrium swelling was affected by the hydrolysis time, block length of poly(glycerol methacrylate), temperature, and the presence of soluble salts. Fibrinogen adsorption and platelet adhesion were significantly lower for the hydrogels than for the control polyurethane, whereas albumin adsorption increased for the hydrogels in proportion to the contents of poly(glycerol methacrylate). These hydrogels have potential in a number of biomedical applications such as drug delivery and scaffolds for tissue engineering.     

Design and biophysical characterization of bioresponsive degradable poly(dimethylaminoethyl methacrylate) based polymers for in vitro DNA transfection

Water-soluble, degradable polymers based on poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with low cytotoxicity and good p-DNA transfection efficiency are highlighted in this article. To solve the nondegradability issue of PDMAEMA, new polymers based on DMAEMA and 5,6-benzo-2-methylene-1,3-dioxepane (BMDO) for gene transfection were synthesized. A poly(ethylene oxide) (PEO) azo-initiator was used as free-radical initiator. PEGylation was performed to improve water solubility and to reduce cytotoxicity of the polymers. The resulting polymers contain hydrolyzable ester linkages in the backbone and were soluble in water even with very high amounts of ester linkages. These degradable copolymers showed significantly less toxicity with a MTT assay using L929 cell lines and demonstrated promising DNA transfection efficiency when compared with the gold standard poly(ethyleneimine). Bioresponsive properties of the corresponding quaternized DMAEMA based degradable polymers were also studied. Although the quaternized DMAEMA copolymers showed enhanced water solubility, they were inferior in gene transfection and toxicity as compared to the unquaternized copolymers.     

Amphiphilic model conetworks based on cross-linked star copolymers of benzyl methacrylate and 2-(dimethylamino)ethyl methacrylate: synthesis, characterization, and DNA adsorption studies

Six amphiphilic model conetworks of a new structure, that of cross-linked "in-out" star copolymers, were synthesized by the group transfer polymerization (GTP) of the hydrophobic monomer benzyl methacrylate (BzMA) and the ionizable hydrophilic monomer 2-(dimethylamino)ethyl methacrylate (DMAEMA) in a one-pot preparation. The synthesis took place in tetrahydrofuran (THF) using tetrabutylammonium bibenzoate (TBABB) as the catalyst, 1-methoxy-1-(trimethylsiloxy)-2-methyl-propene (MTS) as the initiator, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. Three heteroarm star-, two star block-, one statistical copolymer star-, and one homopolymer star-based networks were prepared. The synthesis of these star-based networks involved four to six steps, including the preparation of the linear (co)polymers, the "arm-first" and the "in-out" star copolymers, and finally the network. The precursors and the extractables were characterized using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy. The degrees of swelling (DSs) of all the networks were measured in THF, while the aqueous DSs were measured as a function of pH. The DSs at low pH were higher than those at neutral or high pH because of the protonation of the DMAEMA units and were found to be dependent on the structure of the network. The DSs in THF were higher than those in neutral water and were independent of the structure. Finally, DNA adsorption studies onto the networks indicated that the DNA binding was governed by electrostatics.     

Synthesis, characterization, and evaluation as transfection reagents of ampholytic star copolymers: effect of star architecture

Five star polymers based on the positively ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the hydrophobic but hydrolyzable tetrahydropyranyl methacrylate (THPMA) were prepared by group-transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as the coupling agent. In particular, four isomeric star copolymers (one heteroarm, two star block, and the statistical star), all with a 3:1 DMAEMA:THPMA molar ratio, plus one star homopolymer of DMAEMA, with degrees of polymerization of the arms equal to 15, were synthesized. After star polymer preparation and preliminary characterization, the THPMA units were hydrolyzed to negatively ionizable hydrophilic methacrylic acid (MAA) untis, thus yielding star polyampholytes. All the star polyampholytes as well as the commercially available transfection reagent SuperFect were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. The transfection efficiency was affected by star architecture. The DMAEMA15-star-MAA5 polyampholyte presented the highest transfection efficiency of all the star polymers tested but lower than that of SuperFect at its optimum conditions. All four star copolymers showed decreased toxicity compared to the DMAEMA star homopolymer for the same amounts of star polymer tested and also compared to the SuperFect at its optimum conditions.     

Synthesis, characterization, and DNA adsorption studies of ampholytic model conetworks based on cross-linked star copolymers

Five model conetworks based on cross-linked star ampholytic copolymers were synthesized by group transfer polymerization. The ampholytic copolymers were based on two hydrophilic monomers: the positively ionizable 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the negatively ionizable methacrylic acid (MAA). Ethylene glycol dimethacrylate was used as the cross-linker. These five ampholytic model conetworks were isomers based on equimolar DMAEMA-MAA copolymer stars of different architectures: heteroarm (two), star block (two), and statistical. The two networks based on the homopolymer stars were also synthesized. The MAA units were introduced via the polymerization of tetrahydropyranyl methacrylate and the acid hydrolysis of the latter after network formation. All the precursors to the (co)networks were characterized in terms of their molecular weights using gel permeation chromatography (GPC). The mass of the extractables from the (co)networks was measured and characterized in terms of molecular weight and composition using GPC and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The degrees of swelling (DS) of all the ampholytic conetworks were measured as a function of pH and were found to present a minimum at a pH value which was taken as the isoelectric point, pI. The DS and the pI values did not present a dependence on conetwork architecture. Finally, DNA adsorption studies onto the ampholyte conetworks indicated that DNA binding was governed by electrostatics.     

Synthesis of cellulose-graft-poly(N,N-dimethylamino-2-ethyl methacrylate) copolymers via homogeneous ATRP and their aggregates in aqueous media

Cellulose-graft-poly(N,N-dimethylamino-2-ethyl methacrylate) (cellulose-g-PDMAEMA) copolymers were prepared by homogeneous atom transfer radical polymerization (ATRP) under mild conditions. Cellulose macroinitiator was successfully synthesized by direct acylation of cellulose with 2-bromopropionyl bromide in a room temperature ionic liquid (RTIL), 1-allyl-3-methylimidazolium chloride. Copolymers were obtained via ATRP of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA) with CuBr/pentamethyldiethylenetriamine (PMDETA) as catalyst and N,N-dimethylformamide (DMF) as solvent without homopolymer byproduct. The grafting copolymers were characterized by (1)H NMR, FT-IR, and TGA measurements. The results confirmed that PDMAEMA had been covalently bonded to cellulose backbone. Furthermore, the assemblies or aggregates formed by cellulose-g-PDMAEMA copolymers in water were studied at various concentrations, temperatures, and pH values by means of UV, DLS, TEM, and AFM. The results indicate that the copolymers had the pH- and temperature-responsive properties similar to the expected stimuli-responses by PDMAEMA. The synthetic strategy presented here could be employed in the preparation of other novel biomaterials from a variety of polysaccharides.     

Cationic double-hydrophilic model networks: synthesis,characterization, modeling and protein adsorption studies

Group transfer polymerization (GTP) was used for the preparation of eight networks based on two hydrophilic monomers, 2-(dimethylamino)ethyl methacrylate (DMAEMA) and poly(ethylene glycol) methacrylate (PEGMA). Ethylene glycol dimethacrylate (EGDMA) served as the cross-linker, whereas 1,4-bis(methoxytrimethylsiloxymethylene)cyclohexane (MTSMC) was used as a bifunctional initiator. Seven of the networks had linear segments of accurate molecular weight between the cross-links, i.e., they were model networks, whereas the eighth was an equimolar randomly cross-linked network. Five of the seven model networks were based on ABA triblock copolymers with PEGMA midblocks and DMAEMA endblocks, in which the DMAEMA/PEGMA ratio was varied. The remaining two model networks were equimolar isomers, the one based on BAB triblocks (with a DMAEMA midblock) and the other based on the statistical copolymer. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. The degrees of swelling at low pH values increased with the percentage of the DMAEMA monomer, which is ionized under these conditions. These swelling results were confirmed qualitatively by theoretical calculations. Finally, the pH-dependence of the adsorption of the proteins pepsin, bovine serum albumin, and lysozyme onto one of the model networks was studied.     

Modulating antimicrobial activity by synthesis: dendritic copolymers based on nonquaternized 2-(dimethylamino)ethyl methacrylate by Cu-mediated ATRP

The synthesis of novel star-like heteroarms polymers A(BC)(n) containing m-PEG (block A), methylmethacrylate (MMA), and nonquaternized 2-(dimethylamino)ethyl methacrylate (DMAEMA) (blocks BC) is here reported. We demonstrated that copolymer films with comparable amounts of DMAEMA have antimicrobial properties strongly depending on the topological structure (i.e., the number of arms) of the composing copolymers. We interpret the highest antimicrobial activity of A(BC)(2) with respect to A(BC)(4) and linear copolymers (respectively, A(BC)(2) ≥ A(BC)(4) > A(BC)) as probably due to the formation of strong hydrogen bonds between close amino-ammonium groups in the A(BC)(2) film. Strong hydrogen bonds seem to be somewhat disfavored in the case of the linear species by the difference in both polymer architecture and film morphology compared with the A(BC)(2) and A(BC)(4) architectures.     

Cationic amphiphilic star and linear block copolymers: synthesis, self-assembly, and in vitro gene transfection

A series of amphiphilic star and linear block copolymers were synthesized using ATRP. The core consisted of either polystyrene (PS) or poly(n-butyl acrylate) (PBuA), having different glass-transition (T(g)) values. These polymers were used as macroinitiators in the polymerization of the cationic 2-(dimethylamino)ethyl methacrylate (DMAEMA). The polymers were used to study the effects of polymer architecture and flexibility on the self-assembling properties, DNA complexation, and transfection. All polymers formed core-shell micelles in aqueous solutions and condensed plasmid DNA. Linear PDMAEMA-PBuA-PDMAEMA has transfection efficiency comparable to PEI25K in ARPE19 cell line. Glassy state of the micellar core and star-shaped architecture decreased the DNA transfection compared with the rubbery and linear polymer structures. The polymers showed low cellular toxicity at low nitrogen/phosphate (n/p) ratios.     

Synthesis, characterization, properties, and drug release of poly(alkyl methacrylate-b-isobutylene-b-alkyl methacrylate)

Polyisobutylene (PIB)-based block copolymers have attracted significant interest as biomaterials. Poly(styrene-b-isobutylene-b-styrene) (SIBS) has been shown to be vascularly compatible and, when loaded with paclitaxel (PTx) and coated on a coronary stent, has the ability to deliver the drug directly to arterial walls. Modulation of drug release from this polymer has been achieved by varying the drug/polymer ratio, by blending SIBS with other polymers, and by derivatizing the styrene end blocks to vary the hydrophilicity of the copolymer. In this paper, results are reported on the synthesis, physical properties, and drug elution profile of PIB-based block copolymers containing methacrylate end blocks. The preparation of PIB-poly(alkyl methacrylate) block copolymers has been accomplished by a new synthetic methodology using living cationic and anionic polymerization techniques. 1,1-Diphenylethylene end-functionalized PIB was prepared from the reaction of living PIB and 1,4-bis(1-phenylethenyl)benzene, followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH(3))(2)). PIB-DPE was quantitatively metalated with n-butyllithium in tetrahydrofuran, and the resulting macroinitiator could initiate the polymerization of methacrylate monomers, yielding block copolymers with high blocking efficiency. Poly(methyl methacrylate-b-isobutylene-b-methyl methacrylate) (PMMA-b-PIB-b-PMMA) and poly(hydroxyethyl methacrylate-b-isobutylene-b-hydroxyethyl methacrylate) (PHEMA-b-PIB-b-PHEMA) triblock copolymers were synthesized and used as drug delivery matrixes for coatings on coronary stents. The PMMA-b-PIB-b-PMMA/PTx system displayed zero-order drug release, while stents coated with PHEMA-b-PIB-b-PHEMA/PTx formulations exhibited a significant initial burst release of PTx. Physical characterization using atomic force microscopy and differential scanning calorimetry of the formulated PMMA-b-PIB-b-PMMA coating matrix indicated the partial miscibility of PTx with the PMMA microphase of the matrix.     

From defined reactive diblock copolymers to functional HPMA-based self-assembled nanoaggregates

This paper describes the synthesis of functional amphiphilic poly( N-(2-hydroxypropyl) methacrylamide)-block-poly(lauryl methacrylate) copolymers by RAFT polymerization via the intermediate step of activated ester block copolymers (pentafluoro-phenyl methacrylate). Block copolymers with molecular weights from 12000-28000 g/mol and PDIs of about 1.2 have been obtained. The amphiphilic diblock copolymers form stable super structures (nanoaggregates) by self-organization in aqueous solution. The diameters of these particles are between 100 and 200 nm and depend directly on the molecular weight of the block copolymer. Furthermore, we investigated the impact of these nanoaggregates on cell viability and on the motility of adherent cells. Cytotoxicity was investigated by the MTS test and the fluctuation in cell shape was monitored employing ECIS (electrical cell-substrate impedance sensing). In these investigations, the formed particles are not cell toxic up to a concentration of 2 mg/mL. Thus, our polymeric particles offer potential as polymer therapeutics.     

A versatile method for the conjugation of proteins and peptides to poly[2-(dimethylamino)ethyl methacrylate].

Random copolymers of 2-(dimethylamino) ethyl methacrylate (DMAEMA) with aminoethyl methacrylate (AEMA) were synthesized by radical polymerization. The amount of incorporated primary amino groups could be controlled by the feed ratio of AEMA to DMAEMA, and was varied from 2 to 6 mol %. Subsequently, protected thiol groups were introduced in a derivatization step with N-succinimidyl 3-(2-pyridyldithio)propionate (SPDP) and subsequent treatment with dithiothreitol (DTT). The obtained thiolated p(DMAEMA-co-AEMA) was conjugated to transferrin (Tf) or the F(ab') fragment of mAb 323/A3 via a disulfide linkage. Moreover, the maleimide derivative of the nuclear localization signal (NLS) decapeptide Gly-Pro-Lys-Lys-Lys-Arg-Lys-Val-Glu-Asp-NH(2) was coupled to the thiolated polymer via a thioether linkage. The coupling efficiency, as determined by GPC (Tf), SDS-PAGE [F(ab')], or (1)H NMR (NLS peptide) was 90-95% for the Tf conjugate, and more than 95% for the F(ab') conjugate and the NLS conjugate. The synthetic strategy described in this paper is a universal method for the preparation of conjugates of proteins and peptides with pDMAEMA in particular. This method can possibly be used to synthesize protein-polymethacrylate conjugates in general.     

Structure-activity relationships of water-soluble cationic methacrylate/methacrylamide polymers for nonviral gene delivery.

A number of water-soluble cationic carriers was evaluated as transfectant. Almost all studied cationic methacrylate/methacrylamide polymers were able to condense the structure of plasmid DNA, yielding polymer/plasmid complexes (polyplexes) with a size of 0.1-0.3 micron and a slightly positive zeta-potential, which can be taken up by cells, e.g., via endocytosis. However, the transfection efficiency and the cytotoxicity of the polymers differed widely: the highest transfection efficiency and cytotoxicity were observed for poly[2-(dimethylamino)ethyl methacrylate], p(DMAEMA). Assuming that polyplexes enter cells via endocytosis, p(DMAEMA) apparently has advantageous properties to escape the endosome. A possible explanation is that, due to its average pK(a) value of 7.5, p(DMAEMA) is partially protonated at physiological pH and might behave as a proton sponge. This might cause a disruption of the endosome, which results in the release of both the polyplexes and cytotoxic endosomal/lysosomal enzymes into the cytosol. On the other hand, the analogues of p(DMAEMA) studied here have a higher average pKa value and have, consequently, a higher degree of protonation and a lower buffering capacity. This might be associated with a lower tendency to destabilize the endosome, resulting in both a lower transfection efficiency and a lower cytotoxicity. Furthermore, molecular modeling showed that, of all studied polymers, p(DMAEMA) has the lowest number of interactions with DNA. We therefore hypothesized that the superior transfection efficiency of p(DMAEMA) containing polyplexes can be ascribed to an intrinsic property of p(DMAEMA) to destabilize endosomes combined with an easy dissociation of the polyplex once present in the cytosol and/or the nucleus.     

Nanoscopic cationic methacrylate star homopolymers: synthesis by group transfer polymerization, characterization and evaluation as transfection reagents

Seven star polymers with degrees of polymerization (DPs) of the arms from 10 to 100 and dimensions in the nanometer range were prepared using sequential group transfer polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic positively ionizable monomer) and ethylene glycol dimethacrylate (hydrophobic neutral cross-linker). The polymers were characterized in tetrahydrofuran by gel permeation chromatography and static light scattering to determine the molecular weights and the weight-average number of arms for each sample. The number of arms of the star polymers varied from 20 to 72. Aqueous solutions of the star polymers were studied by turbidimetry, hydrogen ion titration, and dynamic light scattering to determine their cloud points, pKs, and hydrodynamic diameters. The cloud points of the larger star polymers, with arm DP 30-100, were found to be 29-34 degrees C, almost independent of the DP of the arms. Similarly, the pKs of all star polymers were calculated to range between 6.7 and 7.0, again independent of the arm DP. In contrast, the hydrodynamic diameters of the star polymers strongly depended on the DP of the arms. In particular, by increasing the DP of the arms from 20 to 100, the hydrodynamic diameters in water increased from 7 to 31 nm. All star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 with the enhanced green fluorescent protein as the reporter gene. Our results showed that as the DP of the arms of the DMAEMA star homopolymers increased from 10 to 100, the overall transfection efficiency decreased, with the star polymer with DP of the arms of 10 emerging as the best transfection reagent. Systematic variation of the amounts of star polymer and plasmid DNA used in the transfections led to an optimization of the performance of this star polymer, yielding overall transfection efficiencies of 15%, comparable to the optimum overall transfection efficiency of the commercially available transfection reagent SuperFect of 13%.     

Cationic spacer arm design strategy for control of antimicrobial activity and conformation of amphiphilic methacrylate random copolymers

Antimicrobial and hemolytic activities of amphiphilic random copolymers were modulated by the structure of the cationic side chain spacer arms, including 2-aminoethylene, 4-aminobutylene, and 6-aminohexylene groups. Cationic amphiphilic random copolymers with ethyl methacrylate (EMA) comonomer were prepared with a range of comonomer fractions, and the library of copolymers was screened for antimicrobial and hemolytic activities. Copolymers with 4-aminobutylene cationic side chains showed an order of magnitude enhancement in their antimicrobial activity relative to those with 2-aminoethylene spacer arms, without causing adverse hemolysis. When the spacer arms were further elongated to hexylene, the copolymers displayed potent antimicrobial and hemolytic activities. The 4-aminobutylene side chain appears to be the optimal spacer arm length for maximal antimicrobial potency and minimal hemolysis, when combined with hydrophobic ethylmethacrylate in a roughly 70/30 ratio. The copolymers displayed relatively rapid bactericidal kinetics and broad-spectrum activity against a panel of Gram-positive and Gram-negative bacteria. The effect of the spacer arms on the polymer conformation in the membrane-bound state was investigated by molecular dynamics simulations. The polymer backbones adopt an extended chain conformation, parallel to the membrane surface. A facially amphiphilic conformation at the membrane surface was observed, with the primary ammonium groups localized at the lipid phoshophate region and the nonpolar side chains of EMA comonomers buried in the hydrophobic membrane environment. This study demonstrates that the antimicrobial activity and molecular conformation of amphiphilic methacrylate random copolymers can be modulated by adjustment of cationic side chain spacer arms.     

Synthesis of multiarm star poly(glycerol)-block-poly(2-hydroxyethyl methacrylate)

Well-defined multiarm star block copolymers poly(glycerol)-b-poly(2-hydroxyethyl methacrylate) (PG-b-PHEMA) with an average of 56, 66, and 90 PHEMA arms, respectively, have been prepared by atom transfer radical polymerization (ATRP) of HEMA in methanol by a core-first strategy. The hyperbranched macroinitiators employed were prepared on the basis of well-defined hyperbranched polyglycerol by esterification with 2-bromoisobutyryl bromide. Polydispersites M(w)/M(n) of the new multiarm stars were in the range of 1.11-1.82. Unexpectedly, with the combination of CuCl/CuBr(2)/2,2'-bipyridyl as catalyst, the polymerization conversion can be driven to maximum values of 79%. The control of CuCl catalyst concentration is also very important to achieve high conversion and narrow polydispersity. The absolute M(n) values of the obtained multiarm star polymers were in good agreement with the calculated ones, and the highest M(n) values of the multiarm star copolymer is around 10(6) g/mol. Kinetic analysis shows that an induction period exists in the polymerization of HEMA. After this induction period, a linear dependence of ln ([M](0)/[M](t)()) on time was observed. Due to the star architecture, the viscosity of the obtained multiarm star PHEMA is much lower than that of linear PHEMA.     

Cationic amphiphilic model networks based on symmetrical ABCBA pentablock terpolymers: synthesis, characterization, and modeling

Eight isomeric networks based on equimolar terpolymers were synthesized using group transfer polymerization (GTP) and were characterized in terms of their swelling properties. Two hydrophilic monomers, the nonionic methoxy hexa(ethylene glycol) methacrylate (HEGMA) and the ionizable 2-(dimethylamino)ethyl methacrylate (DMAEMA), and a hydrophobic (nonionic) monomer, methyl methacrylate (MMA), were employed for the syntheses. 1,4-Bis(methoxytrimethylsiloxymethylene)cyclohexane (MTSMC) was used as the bifunctional GTP initiator, while ethylene glycol dimethacrylate (EGDMA) served as the cross-linker. Seven of the networks were model networks, six of which were based on the symmetrical pentablock terpolymers ABCBA, ACBCA, BACAB, BCACB, CBABC, and CABAC, whereas the seventh model network was based on the statistical terpolymer. The eighth network was a randomly cross-linked network based on the statistical terpolymer, prepared by the simultaneous quaterpolymerization of the three monomers and the cross-linker. The molecular weights and molecular weight distributions of the linear pentablock terpolymer precursors, as well as those of their homopolymer and ABA triblock copolymer precursors, were characterized by gel permeation chromatography (GPC) in tetrahydrofuran. The sol fraction of each network was measured and found to be relatively low. The aqueous degrees of swelling of all networks were found to increase at acidic pH due to the ionization of the DMAEMA tertiary amine units. The acidic degrees of swelling of the pentablock terpolymer networks were lower than those of their statistical counterparts due to microphase separation in the former type of networks, also confirmed by thermodynamic calculations and small-angle neutron scattering experiments.