Saccharification and adsorption characteristics of modified cellulases with hydrophilic/hydrophobic copolymers.

Saccharification and adsorption characteristics of native and modified cellulases were investigated. Copolymers, containing polyoxyalkylene and maleic anhydride (MA) were used to modify cellulase. Amino groups of the cellulase were covalently coupled with the MA. As the degree of modification (DM) increased, the activity of modified cellulase slightly decreased. At the maximum DM, the modified cellulase activity retained more than 75% of the unmodified native cellulase activity. In saccharification, native cellulase rapidly adsorbed onto the substrate at initial reaction time. Native cellulase adsorbed tightly onto the substrate surface and did not desorb as reaction time proceeded. The strong adsorption of cellulase onto the substrate can, however, be controlled by the modification. As the hydrophilicity of modified cellulase increased, free modified enzyme concentration also increased. As a result, the conversion rate of modified cellulase was higher than the native one.     

Synthesis and characterization of biocompatible thermo-responsive gelators based on ABA triblock copolymers

The synthesis of biocompatible, thermo-responsive ABA triblock copolymers in which the outer A blocks comprise poly(N-isopropylacrylamide) and the central B block is poly(2-methacryloyloxyethyl phosphorylcholine) is achieved using atom transfer radical polymerization with a commercially available bifunctional initiator. These novel triblock copolymers are water-soluble in dilute aqueous solution at 20 degrees C and pH 7.4 but form free-standing physical gels at 37 degrees C due to hydrophobic interactions between the poly(N-isopropylacrylamide) blocks. This gelation is reversible, and the gels are believed to contain nanosized micellar domains; this suggests possible applications in drug delivery and tissue engineering.     

Synthesis of biocompatible,stimuli-responsive,physical gels based on ABA triblock copolymers

ABA triblock copolymers [A = 2-(diisopropylamino)ethyl methacrylate), DPA or 2-(diethylamino)ethyl methacrylate), DEA; B = 2-methacryloyloxyethyl phosphorylcholine, MPC] prepared using atom transfer radical polymerization dissolve in acidic solution but form biocompatible free-standing gels at around neutral pH in moderately concentrated aqueous solution (above approximately 10 w/v % copolymer). Proton NMR studies indicate that physical gelation occurs because the deprotonated outer DPA (or DEA) blocks become hydrophobic, which leads to attractive interactions between the chains: addition of acid leads to immediate dissolution of the micellar gel. Release studies using dipyridamole as a model hydrophobic drug indicate that sustained release profiles can be obtained from these gels under physiologically relevant conditions. More concentrated DPA-MPC-DPA gels give slower release profiles, as expected. At lower pH, fast, triggered release can also be achieved, because gel dissolution occurs under these conditions. Furthermore, the nature of the outer block also plays a role; the more hydrophobic DPA-MPC-DPA triblock gels are formed at lower copolymer concentrations and retain the drug longer than the DEA-MPC-DEA triblock gels.     

Modification of hydrophilic and hydrophobic surfaces using an ionic-complementary peptide

Ionic-complementary peptides are novel nano-biomaterials with a variety of biomedical applications including potential biosurface engineering. This study presents evidence that a model ionic-complementary peptide EAK16-II is capable of assembling/coating on hydrophilic mica as well as hydrophobic highly ordered pyrolytic graphite (HOPG) surfaces with different nano-patterns. EAK16-II forms randomly oriented nanofibers or nanofiber networks on mica, while ordered nanofibers parallel or oriented 60 degrees or 120 degrees to each other on HOPG, reflecting the crystallographic symmetry of graphite (0001). The density of coated nanofibers on both surfaces can be controlled by adjusting the peptide concentration and the contact time of the peptide solution with the surface. The coated EAK16-II nanofibers alter the wettability of the two surfaces differently: the water contact angle of bare mica surface is measured to be <10 degrees , while it increases to 20.3+/-2.9 degrees upon 2 h modification of the surface using a 29 microM EAK16-II solution. In contrast, the water contact angle decreases significantly from 71.2+/-11.1 degrees to 39.4+/-4.3 degrees after the HOPG surface is coated with a 29 microM peptide solution for 2 h. The stability of the EAK16-II nanofibers on both surfaces is further evaluated by immersing the surface into acidic and basic solutions and analyzing the changes in the nanofiber surface coverage. The EAK16-II nanofibers on mica remain stable in acidic solution but not in alkaline solution, while they are stable on the HOPG surface regardless of the solution pH. This work demonstrates the possibility of using self-assembling peptides for surface modification applications.     

Solubilization and controlled release of a hydrophobic drug using novel micelle-forming ABC triblock copolymers

Amphiphilic ABC triblock copolymers composed of monomethoxy-capped poly(ethylene glycol) (MPEG), poly(2-(dimethylamino)ethyl methacrylate) (DMA), and poly(2-(diethylamino)ethyl methacrylate) (DEA) have been synthesized by atom transfer radical polymerization (ATRP). These copolymers dissolve molecularly in acidic aqueous media at room temperature due to protonation of the tertiary amine groups on the DMA and DEA residues. On adjusting the pH with base, micellization occurred at pH 8, with the water-insoluble, deprotonated DEA block forming the hydrophobic cores and the MPEG and DMA blocks forming the hydrophilic micellar coronas and inner shells, respectively. This pH-induced micellization has been exploited to develop a solvent-free protocol for drug loading. A model hydrophobic drug, dipyridamole (DIP), which dissolves in acid but is insoluble above pH 5.8, was incorporated into the micelles by increasing the pH of an aqueous drug/copolymer mixture to 9. Both the empty and the drug-loaded micelles were characterized by dynamic light scattering and fluorescence studies. The interaction of both pyrene and DIP with the MPEG-DMA-DEA micelles was studied by fluorescence; both compounds had relatively high partition coefficients into the micelles, 4.5 x 10(5) and 1.5 x 10(4), respectively. Intensity-average micelle diameters ranged from 20 to 90 nm, depending on the polymer composition and concentration. Shorter MPEG blocks (Mn = 2000) produced larger micelles than longer MPEG blocks (Mn = 5000) due to the shift in the hydrophilic-hydrophobic balance of the copolymer. Transmission electron microscopy studies of the drug-loaded micelles indicated spherical morphologies and reasonably uniform particle size distributions, which is in marked contrast to the needlelike morphology observed for pure DIP in the absence of the copolymer. Experiments on controlled release demonstrated that DIP-loaded MPEG-DMA-DEA micelles act as a drug carrier, giving slow release to the surrounding solution over a period of days. Rapid release can be triggered by reducing the pH to reverse the micellization.     

Adsorption behavior of a human monoclonal antibody at hydrophilic and hydrophobic surfaces

One aspiration for the formulation of human monoclonal antibodies (mAb) is to reach high solution concentrations without compromising stability. Protein surface activity leading to instability is well known, but our understanding of mAb adsorption to the solid-liquid interface in relevant pH and surfactant conditions is incomplete. To investigate these conditions, we used total internal reflection fluorescence (TIRF) and neutron reflectometry (NR). The mAb tested (“mAb-1”) showed highest surface loading to silica at pH 7.4 (~12 mg/m²), with lower surface loading at pH 5.5 (~5.5 mg/m², further from its pI of 8.99) and to hydrophobized silica (~2 mg/m²). The extent of desorption of mAb-1 from silica or hydrophobized silica was related to the relative affinity of polysorbate 20 or 80 for the same surface. mAb-1 adsorbed to silica on co-injection with polysorbate (above its critical micelle concentration) and also to silica pre-coated with polysorbate. A bilayer model was developed from NR data for mAb-1 at concentrations of 50–5000 mg/L, pH 5.5, and 50–2000 mg/L, pH 7.4. The inner mAb-1 layer was adsorbed to the SiO₂ surface at near saturation with an end-on” orientation, while the outer mAb-1 layer was sparse and molecules had a “side-on” orientation. A non-uniform triple layer was observed at 5000 mg/L, pH 7.4, suggesting mAb-1 adsorbed to the SiO₂ surface as oligomers at this concentration and pH. mAb-1 adsorbed as a sparse monolayer to hydrophobized silica, with a layer thickness increasing with bulk concentration - suggesting a near end-on orientation without observable relaxation-unfolding.     

Molecular dynamics simulations of a protein on hydrophobic and hydrophilic surfaces.

Molecular dynamics simulations have been used to investigate the behavior of the peripheral membrane protein, cytochrome c, covalently tethered to hydrophobic (methyl-terminated) and hydrophilic (thiol-terminated) self-assembled monolayers (SAMs). The simulations predict that the protein will undergo minor structural changes when it is tethered to either surface, and the structures differ qualitatively on the two surfaces: the protein is less spherical on the hydrophilic SAM where the polar surface residues reach out to interact with the SAM surface. The protein is completely excluded from the hydrophobic SAM but partially dissolves in the hydrophilic SAM. Consequently, the surface of the thiol-terminated SAM is considerably less ordered than that of the methyl-terminated SAM, although a comparable, high degree of order is maintained in the bulk of both SAMs: the chains exhibit collective tilts in the nearest-neighbor direction at angles of 20 degrees and 17 degrees with respect to the surface normal in the hydrophobic and the hydrophilic SAMs, respectively. On the hydrophobic SAM the protein is oriented so that the heme plane is more nearly parallel to the surface, whereas on the hydrophilic surface it is more nearly perpendicular. The secondary structure of the protein, dominated by alpha helices, is not significantly affected, but the structure of the loops as well as the helix packing is slightly modified by the surfaces.     

Zein adsorption to hydrophilic and hydrophobic surfaces investigated by surface plasmon resonance

Zein, the prolamine of corn, has been investigated for its potential as an industrial biopolymer. In previous research, zein was plasticized with oleic acid and formed into sheets/films. Physical properties of films were affected by film structure and controlled in turn by zein-oleic acid interactions. The nature of such interactions is not well understood. Thus, protein-fatty acid interactions were investigated in this work by the use of surface plasmon resonance (SPR). Zein adsorption from 75% aqueous 2-propanol solutions, 0.05% to 0.5% w/v, onto hydrophilic and hydrophobic self-assembled monolayers (SAMs) formed by 11-mercaptoundecanoic acid and 1-octanethiol, respectively, was monitored by high time resolution SPR. Initial adsorption rate and ultimate surface coverage increased with bulk protein concentration for both surfaces. The initial slope of plotted adsorption isotherms was higher on 11-mercaptoundecanoic acid than on 1-octanethiol, indicating higher zein affinity for hydrophilic SAMs. Also, maximum adsorption values were higher for zein on hydrophilic than on hydrophobic SAMs. Flushing off loosely bound zein in the SPR cell allowed estimation of apparent monolayer values. Differences in monolayer values for hydrophobic and hydrophilic surfaces were explained in terms of zein adsorption footprint.     

Apparent activation energies associated with protein dynamics on hydrophobic and hydrophilic surfaces

With the use of single-molecule total internal reflection fluorescence microscopy (TIRFM), the dynamics of bovine serum albumin (BSA) and human fibrinogen (Fg) at low concentrations were observed at the solid-aqueous interface as a function of temperature on hydrophobic trimethylsilane (TMS) and hydrophilic fused silica (FS) surfaces. Multiple dynamic modes and populations were observed and characterized by their surface residence times and squared-displacement distributions (surface diffusion). Characteristic desorption and diffusion rates for each population/mode were generally found to increase with temperature, and apparent activation energies were determined from Arrhenius analyses. The apparent activation energies of desorption and diffusion were typically higher on FS than on TMS surfaces, suggesting that protein desorption and mobility were hindered on hydrophilic surfaces due to favorable protein-surface and solvent-surface interactions. The diffusion of BSA on TMS appeared to be activationless for several populations, whereas diffusion on FS always exhibited an apparent activation energy. All activation energies were small in absolute terms (generally only a few kBT), suggesting that most adsorbed protein molecules are weakly bound and move and desorb readily under ambient conditions.     

Synthesis of biocompatible polymeric hydrogels with tunable adhesion to both hydrophobic and hydrophilic surfaces

We report the synthesis of biocompatible polymeric hydrogels based on poly(vinyl acetate) (PVAc) and poly(methyl vinyl ether-co-maleic anhydride) (PMVE-MA). These polymeric hydrogels show strong and tunable adhesion to both hydrophobic and hydrophilic surfaces and should be ideal candidates as bioadhesives for applications such as denture adhesion. PVAc was partially hydrolyzed and then mixed with PMVE-MA. Crosslinking between these two polymers through reactions between hydroxyl groups in partially hydrolyzed PVAc and maleic anhydride groups in PMVE-MA increased their compatibility and prevented phase separation so transparent hydrogels were formed. The adhesion of these polymeric hydrogels to hydrophobic and hydrophilic surfaces was tailored by regulating the degree of hydrolysis of PVAc and the molecular weights of the polymers. In the vicinity of critical gel point, where the elastic modulus G' and the viscous modulus G' scale as G' approximately G' approximately omega (0.3), polymeric hydrogels show optimal adhesion. Transparent gels are formed in mixed solvents of water and ethanol. The content of ethanol in the mixed solvent can be partially replaced by propylene glycol, glycerol, or poly(ethenyl glycol)-400, and the composition of appropriate mixed solvents can be determined by the calculation of solubility parameters.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

ATP level variations in heterotrophic bacteria during attachment on hydrophilic and hydrophobic surfaces.

A survey of the extracellular ATP levels of 86 heterotrophic bacteria showed that gram-negative bacteria of the genera Sulfitobacter, Staleya, and Marinobacter secreted elevated amounts of extracellular ATP, ranging from 6.0 to 9.8 pM ATP/colony forming unit (cfu), and that gram-positive bacteria of the genera Kocuria and Planococcus secreted up to 4.1 pM ATP/cfu. Variations in the levels of extracellular and intracellular ATP-dependent luminescence were monitored in living cells of Sulfitobacter mediterraneus ATCC 700856T and Planococcus maritimus F 90 during 48 h of attachment on hydrophobic (poly[tert-butyl methacrylate], PtBMA) and hydrophilic (mica) surfaces. The bacteria responded to different polymeric surfaces by producing either intracellular or extracellular ATP. The level of intracellular ATP in S. mediterraneus ATCC 700856T attached to either surface was as high as 50-55 pM ATP/cfu, while in P. maritimus F 90 it was 120 and 250 pM ATP/cfu on PtBMA and mica, respectively. S. mediterraneus ATCC 700856T generated about 20 and 50 pM of extracellular ATP/cfu on PtBMA and mica, respectively, while the amount generated by P. maritimus F 90 was about the same for both surfaces, 6 pM ATP/cfu. The levels of extracellular ATP generated by S. mediterraneus during attachment on PtBMA and mica were two to five times higher than those detected during the initial screening. High-resolution atomic force microscopy imaging revealed a potentially interesting correlation between the porous cell-surface of certain alpha- and gamma-proteobacteria and their ability to secrete high amounts of ATP.     

Rubredoxin refolding on nanostructured hydrophobic surfaces: Evidence for a new type of biomimetic chaperones

Rubredoxins (Rds) are small proteins containing a tetrahedral Fe(SCys)₄ site. Folded forms of metal free Rds (apoRds) show greatly impaired ability to incorporate iron compared with chaotropically unfolded apoRds. In this study, formation of the Rd holoprotein (holoRd) on addition of iron to a structured, but iron‐uptake incompetent apoRd was investigated in the presence of polystyrene nanoparticles (NP). In our rationale, hydrophobic contacts between apoRd and the NP surface would expose protein regions (including ligand cysteines) buried in the structured apoRd, allowing iron incorporation and folding to the native holoRd. Burial of the hydrophobic regions in the folded holoRd would allow its detachment from the NP surface. We found that both rate and yield of holoRd formation increased significantly in the presence of NP and were influenced by the NP concentration and size. Rates and yields had an optimum at “catalytic” NP concentrations (0.2 g/L NP) when using relatively small NP (46 nm diameter). At these optimal conditions, only a fraction of the apoRd was bound to the NP, consistent with the occurrence of turnover events on the NP surface. Lower rates and yields at higher NP concentrations or when using larger NP (200 nm) suggest that steric effects and molecular crowding on the NP surface favor specific “iron‐uptake‐competent” conformations of apoRd on the NP surface. This bio‐mimetic chaperone system may be applicable to other proteins requiring an unfolding step before cofactor‐triggered refolding, particularly when over‐expressed under limited cofactor accessibility. Proteins 2014; 82:3154–3162. © 2014 Wiley Periodicals, Inc.     

Nisin adsorption on hydrophilic and hydrophobic surfaces: evidence of its interactions and antibacterial activity

Study of peptides adsorption on surfaces remains a current challenge in literature. A complementary approach, combining X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the antimicrobial peptide nisin adsorption on hydrophilic and hydrophobic surfaces. The native low density polyethylene was used as hydrophobic support and it was grafted with acrylic acid to render it hydrophilic. XPS permitted to confirm nisin adsorption and to determine its amount on the surfaces. ToF‐SIMS permitted to identify the adsorbed bacteriocin type and to observe its distribution and orientation behavior on both types of surfaces. Nisin was more oriented by its hydrophobic side to the hydrophobic substrate and by its hydrophilic side to the outer layers of the adsorbed peptide, in contrast to what was observed on the hydrophilic substrate. A correlation was found between XPS and ToF‐SIMS results, the types of interactions on both surfaces and the observed antibacterial activity. Such interfacial studies are crucial for better understanding the peptides interactions and adsorption on surfaces and must be considered when setting up antimicrobial surfaces. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and characterization of glycopolymer-polypeptide triblock copolymers

Glycopolymer-polypeptide triblock copolymers of the structure, poly(l-alanine)-b-poly(2-acryloyloxyethyl-lactoside)-b-poly(l-alanine) (AGA), have been synthesized by sequential atom transfer radical polymerization (ATRP) and ring-opening polymerization (ROP). Controlled free radical polymerization of 2-O-acryloyl-oxyethoxyl-(2,3,4,6-tetra-O-acetyl-beta-d-galactopyranosyl)-(1-4)-2,3,6-tri-O-acetyl-beta-d-glucopyranoside (AEL) by ATRP with a dibromoxylene (DBX)/CuBr/bipy complex system was used to generate a central glycopolymer block. Telechelic glycopolymers with diamino end groups were obtained by end group transformation and subsequently used as macroinitiators for ROP of l-alanine N-carboxyanhydride monomers (Ala-NCA). Gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy analysis demonstrated that copolymer molecular weight and composition were controlled by both the molar ratios of the Ala-NCA monomer to macroinitiator and monomer conversion and exhibited a narrow distribution (Mw/Mn = 1.06-1.26). FT-IR spectroscopy of triblock copolymers revealed that the ratio of alpha-helix/beta-sheet increased with poly(l-alanine) block length. Of note, transmission electron microscopy (TEM) demonstrated that selected amphiphilic glycopolymer-polypeptide triblock copolymers self-assemble in aqueous solution to form nearly spherical aggregates of several hundreds nanometer in diameter. Significantly, the sequential application of ATRP and ROP techniques provides an effective method for producing triblock copolymers with a central glycopolymer block and flanking polypeptide blocks of defined architecture, controlled molecular weight, and low polydispersity.     

Lipase immobilisation: an equilibrium study of lipases immobilised on hydrophobic and hydrophilic/hydrophobic supports

This work investigates the enzyme-support equilibrium behaviour in immobilised lipase biocatalysts. Equilibrium data determines the maximum enzyme up-take by unit weight of support. Four lipases were immobilised on two polymeric supports, respectively. They were Lipase PS from Pseudomonas, Lipolase 100L from Humicola, SP871 from Rhizomucor miehel and QL from Alcaligenes. The supports were Accurel EP100 (a polypropylene material) and 45SAA (a polypropylene/silica composite). Experimentally, equilibrium was expressed in terms of lipase loading (LU/g support) versus residual lipase concentration (LU/dm³). Activity, efficiency and operational stability of the immobilised lipases were assayed by solvent-free esterification of oleic acid and octanol.Equilibrium data were modelled by the Langmuir, Freundlich and Redlich–Peterson formulae. It was found that Lipolase 100L/Accurel, PS/45SAA and SP871/45SAA systems conformed to the Langmuir behaviour, while Lipase PS/Accurel and SP871/Accurel systems followed the Freundlich behaviour and Lipolase 100L/45SAA, QL/45SAA and QL/Accurel EP100 resembled Redlich–Peterson behaviour. Whereas immobilisation on Accurel EP100 resulted in classical equilibrium isotherms with all four lipases, immobilisation on support 45SAA resulted in two-plateau equilibrium curves which included a step change in the isotherm for all lipases studied, except for SP871. Quantitatively, for 1 g lipase, Accurel and 45SAA had a maximum capacity of 140 and 260 kLU for PS, 112 and 550 kLU for Lipolase 100L, 320 and 800 kLU for SP871 and 18 and 29 kLU for QL, respectively.     

Drastically lowered protein adsorption on microbicidal hydrophobic/hydrophilic polyelectrolyte multilayers

Polyelectrolyte multilayer films assembled from a hydrophobic N-alkylated polyethylenimine and a hydrophilic polyacrylate were discovered to exhibit strong antifouling, as well as antimicrobial, activities. Surfaces coated with these layer-by-layer (LbL) films, which range from 6 to 10 bilayers (up to 45 nm in thickness), adsorbed up to 20 times less protein from blood plasma than the uncoated controls. The dependence of the antifouling activity on the nature of the polycation, as well as on assembly conditions and the number of layers in the LbL films, was investigated. Changing the hydrophobicity of the polycation altered the surface composition and the resistance to protein adsorption of the LbL films. Importantly, this resistance was greater for coated surfaces with the polyanion on top; for these films, the average zeta potential pointed to a near neutral surface charge, thus, presumably minimizing their electrostatic interactions with the protein. The film surface exhibited a large contact angle hysteresis, indicating a heterogeneous topology likely due to the existence of hydrophobic-hydrophilic regions on the surface. Scanning electron micrographs of the film surface revealed the existence of nanoscale domains. We hypothesize that the existence of hydrophobic/hydrophilic nanodomains, as well as surface charge neutrality, contributes to the LbL film's resistance to protein adsorption.     

Influence of preadsorbed milk proteins on adhesion of Listeria monocytogenes to hydrophobic and hydrophilic silica surfaces.

The adsorption of beta-lactoglobulin, bovine serum albumin, alpha-lactalbumin, and beta-casein for 8 h and beta-lactoglobulin and bovine serum albumin for 1 h at silanized silica surfaces of low and high hydrophobicity, followed by incubation in buffer and contact with Listeria monocytogenes, resulted in different numbers of cells adhered per unit of surface area. Adhesion to both surfaces was greatest when beta-lactoglobulin was present and was lowest when bovine serum albumin was present. Preadsorption of alpha-lactalbumin and beta-casein showed an intermediate effect on cell adhesion. Adsorption of beta-lactoglobulin for 1 h resulted in a generally lower number of cells adhered compared with the 8-h adsorption time, while the opposite result was observed with respect to bovine serum albumin. The adhesion data were explainable in terms of the relative rates of arrival to the surface and postadsorptive conformational change among the proteins, in addition to the extent of surface coverage in each case.     

Molecular modeling study of sulfonated SIBS triblock copolymers

An important class of thermoplastic elastomers involves polystyrene and polyisobutylene blocks (SIBS). Sulfonated SIBS Triblock Copolymers (S-SIBS) are of particular interest because of potential applications for fuel cell and textile applications, where breathable, protective clothing is required. We have used multiscale modeling to gain an understanding of the static and dynamic properties of these polymer systems at detailed atomistic levels. Quantum chemistry tools were used to elucidate the bonding of water molecules and sulfonate groups. In addition, molecular dynamics was applied to calculate the polymer density at various levels of sulfonation. The structures of polymer with hydronium ions and also water were studied and the mechanism of water self-diffusion was proposed. It was found that with increase of water content the hydronium ions move further away from sulfonate groups. The self-diffusion coefficients of water were found to reproduce well experimental trends. Two different distributions of sulfonate groups were studied: one blocky and another perfectly dispersed. In the case of the blocky architecture, the water clusters are connected at a lower sulfonation level, leading to increased water diffusion coefficients as compared to the dispersed architecture.     

Adsorption of fibrinogen on silicon oxide with controlled hydrophobic/hydrophilic properties

The amount of fibrinogen irreversibly adsorbed on silicon dioxide does not exceed 3.6 pmol/cm2 and depends on the protein concentration, solution pH and surface hydrophobic/hydrophilic properties. Electrostatic interactions determine the fibrinogen adsorption rate. Partial denaturation of fibrinogen takes place in its adsorption form diluted solutions with the pH value lower than the protein isoelectric point.