Structural characterisation of thermoreversible anionic polysaccharide gels by their elastoviscous properties

Previously reported results obtained for the elastoviscous properties of some thermoreversible gels formed from anionic polysaccharides (high methoxyl pectin, furcellaran and κ-carrageenan) and also gelatin and maltodextrin are discussed and some conclusions about the structure of the gels are presented.The rate at which the relaxation processes take place in the gel is independent of the polymer concentration suggesting that the gels are structurally inhomogeneous.If the helical conformation of the individual macromolecule is stable the standard enthalpy change on crosslink breakdown is less than 45 kJ mol^?1. A relatively small decrease in standard enthalpy is sufficient for network stability because of the low standard entropy loss on gelation which is typical of semi-rigid chain polymers. If, however, the helical conformation is unstable the gelation process is cooperative and the standard enthalpy change on crosslink breakdown exceeds 200 kJ mol^?1.     

Characterisation of interchain association in polysaccharide solutions by ultrasonic relaxation and velocity

The amplitude of ultrasonic relaxation in aqueous solutions of disordered polysaccharides shows a marked increase with increasing degree of coil overlap and, at comparatively low concentrations, attains values comparable to those observed in polysaccharide gels. Mechanical spectroscopy studies indicate that, on the ultrasonic timescale, dynamic networks formed by polymer entanglement in solution are indistinguishable from true gels. In both cases the intense relaxations observed are attributed predominantly to motion of solvent within the polymer network. Due to the inherent stiffness of most polysaccharides, formation of a highly entangled network structure (with consequent enhancement of ultrasonic relaxation) occurs at much lower concentrations than for typical synthetic polymers. The onset of coil overlap (c¹ transition) is accompanied by an abrupt change in the concentration dependence of ultrasonic velocity. Results for the conformationally rigid polysaccharide xanthan, suggest that velocity measurements may offer a convenient method for determination of c¹ in systems where the normal viscometric characterisation is impossible.     

Structural properties of pectin-gelatin gels. Part II: effect of sucrose/glucose syrup

Small deformation dynamic oscillation and bright field microscopy were used to examine the structural properties of single and mixed high methoxy pectin and gelatin systems in the presence of sucrose/glucose syrup blends. Co-solute concentrated (≥78%) systems of the polysaccharide form rubbery structures which are readily transformed into glassy consistencies according to the time-temperature superposition principle. Increasing amounts of co-solute in the gelatin samples induce changes in viscoelasticity from that of conventional hydrogels to mechanical traces that cover much of the plateau region and the beginning of the glass transition area. Furthermore, manipulation of the protein/ sugar ratio can result in strong crystalline matrices, or viscoelastic solutions where the co-solute forms the continuous phase and the gelatin inclusions can undertake a conformational transition. The properties of the single components were used to rationalise the phase behaviour of their mixtures. Upon triggering the gelation of pectin, mixtures can be made where either gelatin or both components form a continuous phase. Results are discussed in the light of evidence obtained from the ethylene glycol work in Part I.     

Gel-forming structures and stages of red algal galactans of different sulfation levels

Sol-gel transition processes of algal galactans were studied using cryofixation method in combination with freeze-drying and scanning electron microscopy (SEM) techniques. The structures formed in successive stages of gelling process upon cooling were rapidly frozen at defined temperature points and viewed by SEM. It was established that in the case of both types of gelling galactans investigated, a fine honeycomb-like network exists for a wide range of solution temperatures. The formation and structure of this network depends on the structural type, gelling stage, and concentration of the galactan in solution. The honeycomb suprastructures exist also in carrageenan and agarose sols (at temperatures considerably exceeding the gelling temperatures). An additional helical network formed showed different behaviour in the case of carrageenan and agar-type polysaccharides. In the gel-formation process, tightening of the network takes place in both types of galactan gels; the honeycomb structures persist in carrageenan (furcellaran) but not in agarose gels.     

Enzyme-catalyzed phase transition of alginate gels and gelatin-alginate interpenetrated networks

The enzyme-catalyzed gel-sol transition of calcium-alginate obtained by internal gelling strategy with the help of an entrapped alginate lyase is described. We show that alginate molecules and enzyme-produced oligoalginates shorten the gel time of physical gelatin gels (5% and 1.5%), probably due to local protein concentration increase. Interpenetrated networks composed of calcium-alginate and of gelatin were obtained only if elongation of gelatin helices inside a pre-existing calcium-alginate network could occur and only for low gelatin concentration (1.5%). The physical gelatin network is almost reversible inside the alginate one. Both networks can be obtained in the presence of alginate lyase, but gel-sol transition of calcium-alginate cannot be obtained in the presence of gelatin.     

Structure and properties of a bacterial polysaccharide from a Klebsiella strain (ATCC 12657)

The chemical structure and the rheological behavior of the Klebsiella polysaccharide ATCC 12657 was studied and compared with data described in the literature and obtained for similar polysaccharides. The acetylated polysaccharide presents in solution a normal viscoelastic behavior with no evidence of an ordered conformation whatever the experimental conditions are. The deacetylated form can induce the formation of physical gels, in the presence of salt excess or ethanol. Microcalorimetry, optical rotation, and rheology experiments demonstrate that a thermally reversible and highly cooperative conformational transition occurs at the same temperature than a sol-gel transition. The melting of the gel and the conformational transition temperatures are dependent on the nature of cations and ionic concentration, whereas the gel strength is only influenced by polymer concentration.     

Structural determination and immunochemical characterization of the type V group B Streptococcus capsular polysaccharide

The type V capsular polysaccharide of group B Streptococcus has been isolated and purified, and its repeating unit structure determined. The native type V polysaccharide contains D-glucose, D-galactose, 2-acetamido-2-deoxy-D-glucose, and sialic acid in a molar ratio of 3:2:1:1. Methylation analysis and 1H NMR and 13C NMR analysis of the native type V polysaccharide and of its specifically degraded products permitted the determination of the repeating unit structure of the type V polysaccharide: [formula: see text] The type V polysaccharide has certain structural features in common with other group B streptococcal capsular polysaccharides but is antigenically distinct: no immunologic cross-reactivity was observed between type V and types Ia, Ib, II, III, or IV polysaccharides. Studies of antibody binding to the partially degraded forms of the type V polysaccharide indicated that the native epitope is complex, involving most if not all of the sugar residues of the repeating unit.     

Water dynamics in charged and uncharged polysaccharide gels by quasi-elastic neutron scattering

Using a microeV neutron spectrometer we have studied the mobility of water in gels formed by two polysaccharides: agarose and hyaluronic acid. Agarose is a nearly uncharged polysaccharide; its gels are fairly stiff, quasi-random networks of fibre bundles. Hyaluronic acid is a highly charged polysaccharide capable of retaining large amounts of water in entangled meshworks with unusual rheological properties. We have analysed sets of quasi-elastic lineshapes broadened by two proton populations with different degrees of freedom. The resulting microscopic mobility parameters and their temperature dependence reveal a complex behaviour. The overall effect of the biopolymer network is to increase translational as well as rotational relaxation times, but the changes observed are not dramatic and cannot fully account for the strikingly different macroscopic properties of these gels. Local electrostatic interactions (over 3 to 20 A) do not appear to influence significantly the rheological behaviour.     

The structure of high-methoxyl sugar acid gels of citrus pectin as determined by AFM

Images of native high-methoxyl sugar acid gels (HMSAGs) were obtained by atomic force microscopy (AFM) in the Tapping Mode^™. Electronic thinning of the pectin strands to one-pixel wide allowed the pectin network to be viewed in the absence of variable strand widths related to preferentially solvated sugar. Thinned images revealed that HMSAGs of pectin comprise a partially cross-linked network, in that many of the cross-linking moieties are attached at only one end. Based on their structural similarities, aggregated pectin in water appears to be a fluid precursor of a HMSAG of pectin. Furthermore, examination of AFM images revealed that gels with ‘uniform’ distribution of strands and pores between strands had higher gel strengths than gels in which strands were non-uniformly distributed and were separated by large and small spaces.     

Glycerolphosphate-containing cell wall polysaccharides from Streptococcus sanguis

Six glycerolphosphate-containing tetraheteroglycans, a, b-1, b-2, b-3, b-4, and b-5, have been purified from the formamide extracts of Streptococcus sanguis by alcohol and acetone precipitations, Sephadex G-75, and diethylaminoethyl-cellulose column chromatography. The polysaccharides were judged as at least 95% pure by analytical disc gel electrophoresis and immune double diffusion against rabbit antiserum. They were shown to be cell wall polysaccharides, since they formed a single band of identity in immune double diffusion with partially purified polysaccharide extracted from a purified cell wall preparation of S. sanguis. The polysaccharides were composed of l-rhamnose, d-glucose, and N-acetyl d-glucosamine in a similar molar ratio, but varied in their glycerol and phosphate contents. They exhibited four different mobilities in polyacrylamide disc gel electrophoresis at pH 8.9. When they were treated with formamide at 170 C for 20 min, the faster moving polysaccharide(s) yielded polysaccharides with mobilities corresponding to the other slower moving polysaccharides. These results indicate that the polysaccharides originated from the same cell wall polysaccharide and were produced as a result of breakage in the phosphodiester bonds during the formamide extraction procedure. A preliminary structural study shows that the terminal reducing sugar is l-rhamnose and that the glycerol moiety is probably linked to the polysaccharide through a phosphodiester bond.     

In vitro protein-polysaccharide conjugation: tyrosinase-catalyzed conjugation of gelatin and chitosan

The enzyme tyrosinase was used for the in vitro conjugation of the protein gelatin to the polysaccharide chitosan. Tyrosinases are oxidative enzymes that convert accessible tyrosine residues of proteins into reactive o-quinone moieties. Spectrophotometric and dissolved oxygen studies indicate that tyrosinase can oxidize gelatin and we estimate that 1 in 5 gelatin chains undergo reaction. Oxidized tyrosyl residues (i.e., quinone residues) can undergo nonenzymatic reactions with available nucleophiles such as the nucleophilic amino groups of chitosan. Ultraviolet/visible, (1)H-NMR, and ir provided chemical evidence for the conjugation of oxidized gelatin with chitosan. Physical evidence for conjugation was provided by dynamic viscometry, which indicated that tyrosinase catalyzes the sol-to-gel conversion of gelatin/chitosan mixtures. The gels formed from tyrosinase-catalyzed reactions were observed to differ from gels formed by cooling gelatin. In contrast to gelatin gels, tyrosinase-generated gels had different thermal behavior and were broken by the chitosan-hydrolyzing enzyme chitosanase. These results demonstrate that tyrosinase can be exploited for the in vitro formation of protein-polysaccharide conjugates that offer interesting mechanical properties.     

Xanthan-like ‘weak gel’ rheology from dispersions of ispaghula seed husk

Dispersions of isabgol, the milled seed husk from Plantago ovata Forsk (alternatively known as ispaghula), show ‘weak-gel’ properties broadly similar to those of xanthan and related polysaccharides with rigid, ordered structures in solution. The origin of this behaviour is attributed to tenuous association of fibrillar assemblies visualised by light microscopy. The network structure is retained to 80°C, but decreases steeply at higher temperatures. The melting process is accompanied by a sharp change in optical rotation of the extracted polysaccharide component of isabgol. An earlier change in optical rotation at lower temperature is tentatively attributed to conformational rearrangement of xylan chains within an ordered, intermolecular structure. Aqueous solutions of the extracted polysaccharide form gels which gradually contract on prolonged storage, consistent with progressive re-formation of the fibrillar structure seen for intact isabgol. Loss of gel-like character in isabgol dispersions occurs over the same temperature range as thermogelation of hydroxypropylmethylcellulose, suggesting opportunities for combined use of the two materials as a substitute (or supplement) for gluten in baked products.     

Thermal properties of polysaccharides at low moisture: 1—An endothermic melting process and water-carbohydrate interactions

The thermal properties of a broad range of polysaccharides containing 5–25% w/w water have been studied by differential scanning calorimetry and dynamic mechanical thermal analysis (DMTA). Following room temperature conditioning, an endothermic event accompanied by material softening is observed at 45–80°C for all samples except those above their glass transition temperature. The temperature of the event is determined by thermal history and is apparently independent of polymer type or moisture content. The associated enthalpy increases with water content. Variable frequency DMTA analysis suggests a structural melting event rather than a relaxation process. The endothermic event is recovered over the days timescale after heating, and can be annealed to higher temperatures with increasing holding temperature.

Results are interpreted in terms of a dynamic hydration model in which specific energetic water-carbohydrate interactions occur but with a lifetime defined by their local effective microviscosity. The observation of the endotherm below glass transition temperatures suggests that in aqueous polysaccharide glasses, enthalpic structures involving the solvent can be made and broken.     

THE PRODUCTION OF EXTRACELLULAR POLYSACCHARIDE BY THE UNICELLULAR RED ALGA PORPHYRIDIUM AERUGINEUM1,2

The unicellular red alga Porphyridium aerugineum was shown to be encapsulated by an amorphous, water-soluble, polyanionic polysaccharide of high molecular weight. The encapsulating polysaccharide is qualitatively identical with polysaccharide found dissolved in large quantity in the culture medium. The kinetics of extracellular polysaccharide production as a function of cell age was studied. Rates of production (on a per cell basis) of both encapsulating and dissolved polysaccharides are greatest in stationary phase light-grown cultures. Dissolved polysaccharide was quantitatively isolated by precipitation with cetyl pyridinium chloride, conversion to the calcium salt, and reprecipitation with ethanol. The procedure yields a spectrally pure product, which is composed of glucose, galactose, xylose, and 2 undetermined, sugar components, and has a sulfate content of 7.6% by weight. Electron microscopy of Porphyridium revealed that Golgi vesicles transport, polymerized polysaccharides to and through the cell membrane. Similar vesicles were observed in the multicellular Pseudogloiophloea, indicating that the Golgi complex plays a crucial role in the production of extracellular polysaccharides by the red algae. H¹⁴CO₃^- pulse-label experiments resulted in labeled extracellular polysaccharide in which all the constituent components contained ¹⁴C. Rates of excretion of polysaccharide were found, to follow a cyclic pattern, correlated generally with the division cycle, of the cell.     

Preparation of Acetylated Grapefruit Peel Polysaccharide

Grapefruit peel polysaccharide has antioxidant, antitumor, hypoglycemic and other biological activities, and chemical modification can further improve the properties of the polysaccharide. Acetylation modification of polysaccharides has the advantages of simple operation, low cost and little pollution, and is widely used at present. Different degrees of acetylation modification have different effects on the properties of polysaccharides, so it is necessary to optimize the preparation technology of acetylated grapefruit peel polysaccharides. In this article, acetylated grapefruit peel polysaccharide was prepared by acetic anhydride method. With the degree of acetyl substitution as the evaluation index, combined with the analysis of sugar content and protein content in the polysaccharide before and after modification, the effects of three feeding ratios of 1:0.6, 1 : 1.2 and 1 : 1.8 (polysaccharide: acetic anhydride, mass/volume) on acetylation modification were explored through single factor experiments. The results showed that the optimum ratio of material to liquid for acetylation modification of grapefruit peel polysaccharide was 1:0.6. Under these conditions, the degree of substitution of acetylated grapefruit peel polysaccharide was 0.323, the sugar content was 59.50 % and the protein content was 1.038 %. The results provide some reference for the study of acetylated grapefruit peel polysaccharide.     

Production of extracellular polysaccharides by Lactobacillus delbrueckii ssp. bulgaricus NCFB 2772 grown in a chemically defined medium

Lactobacillus delbrueckii ssp. bulgaricus NCFB 2772 produced an extracellular polysaccharide when grown in a chemically defined medium with glucose or lactose as the substrate carbohydrate. The isolated extracellular polysaccharide had a sugar composition of glucose, galactose and rhamnose in a ratio of 1:6.8:0.7. The production of extracellular polysaccharides increased at higher temperatures, but the bacterium rapidly lost its polysaccharide producing ability at 47°C. Production of polysaccharides was growth-related: no polysaccharide production was found after growth had ceased. An excess carbohydrate did not result in increased polysaccharide production.     

Rheological properties of mixtures of protein-polysaccharide-dynamic viscoelasticity of blend gels of acylated gelatin, kappa-carrageenan, and agarose

Complex Young's modulus of blend gels of gelatin and kappa-carrageenan or agarose has been measured in order to clarify the protein-polysaccharide interaction in biological systems. The mixture of gelatin and kappa-carrageenan showed phase separation in the intermediate volume fraction of gelatin, and it formed a homogeneous gel when the volume fraction of gelatin is very large or very small. Since the dynamic Young's modulus for blend gels of kappa-carrageenan and gelatin was larger than the calculated one from a theory for dispersed systems, some structural reinforcing must occur. The mixture of agarose and gelatin showed the inverse tendency. It was concluded that the role of electrolytic groups was dominant in dilute gels, while molecular entanglement became more important in concentrated gels.     

大豆多糖对双歧杆菌及人肠道菌群生长的影响

目的研究大豆多糖对双歧杆菌及肠道菌群生长的影响。方法替换Bs培养基中的碳源,分为不加糖、加葡萄糖2％、加大豆多糖2％、加大豆多糖5％、加低聚果糖2％五组,加3种双歧杆菌（长双歧、青春双歧、两歧双歧）菌液1％,测其24h后的活菌数,比较大豆多糖对双歧杆菌生长的影响;替换Bs培养基中的碳源,分为不加糖、加葡萄糖2％、加大豆多糖2％,加低聚果糖2％四组,加人体粪便菌液1％,模拟人体肠道环境厌氧培养24h后,用选择性培养基测其肠杆菌、肠球菌、双歧杆菌、乳酸杆菌的活菌数,观察大豆多糖对人体肠道菌群的影响。结果大豆多糖添加量为5％时对长双歧的促进作用明显优于不加糖组（P〈0．05）;大豆多糖对人体肠道各菌群的生长促进作用与低聚果糖差异无显著性（P〉0．05）。结论大豆多糖对长双歧杆菌的体外促进作用较明显;以粪菌群发酵糖试验表明,大豆多糖对乳杆菌和双歧杆菌均有促进作用,和低聚果糖作用效果相比差异无显著性（P〉0．05）,具有益生元的特性。     

Preparation of vinylated polysaccharides and photofabrication of tubular scaffolds as potential use in tissue engineering

Polysaccharides, such as heparin, hyaluronan, and chitosan, were partially derivatized with a styryl or a methacryloyl group by condensation at a carboxyl or an amino group of the polysaccharides with 4-vinylaniline or 4-vinylbenzoic acid. The degree of substitution depended on the reaction conditions. These compounds with low degrees of derivatization produced water-swollen hydrogels only at relatively high concentrations (30-40 wt %) in the presence of a carboxylated camphorquinone upon visible light irradiation. A high degree of derivatization of heparin increased the gel yield and concomitantly reduced the degree of swelling. The copolymerization of these vinylated polysaccharides with styrenated gelatin considerably reduced the degree of swelling. Tubular photoconstructs were prepared by photocopolymerization of vinylated polysaccharide and vinylated gelatin. The mixing of diacrylated poly(ethylene glycol) with vinylated polysaccharide improved the burst strength of photogels against the gradual infusion of water. These photocurable polysaccharides may be used as photocured scaffolds in tissue-engineered devices.     

Effects of Hexametaphosphate on Soybean Pectic Polysaccharide Extraction

The effects of sodium hexametaphosphate concentration, incubation temperature, and pH on the extraction of polysaccharide from soybean okara (soybean curd waste) were examined. The results suggest that the soybean polysaccharides were almost completely extracted with 50 times their volume of a 2% hexametaphosphate solution at 100°C for 2h, avoiding protein contamination. The viscosity, molecular weight, and sugar composition of the polysaccharides were compared with those of the commercially available samples. No differences were observed in the molecular weight or neutral sugar composition. However, it was found that the galacturonate distribution in the molecules of the two polysaccharides was different. The viscosity of the polysaccharide solution was changed by adding small amount of salt.