Equilibrium hydrogen exchange reveals extensive hydrogen bonded secondary structure in the on-pathway intermediate of Im7

The four-helical immunity protein Im7 folds through an on-pathway intermediate that has a specific, but partially misfolded, hydrophobic core. In order to gain further insight into the structure of this species, we have identified the backbone hydrogen bonds formed in the ensemble by measuring the amide exchange rates (under EX2 conditions) of the wild-type protein and a variant, I72V. In this mutant the intermediate is significantly destabilised relative to the unfolded state (deltadeltaG(ui) = 4.4 kJ/mol) but the native state is only slightly destabilised (deltadeltaG(nu) = 1.8 kJ/mol) at 10 degrees C in 2H2O, pH* 7.0 containing 0.4 M Na2SO4, consistent with the view that this residue forms significant non-native stabilising interactions in the intermediate state. Comparison of the hydrogen exchange rates of the two proteins, therefore, enables the state from which hydrogen exchange occurs to be identified. The data show that amides in helices I, II and IV in both proteins exchange slowly with a free energy similar to that associated with global unfolding, suggesting that these helices form highly protected hydrogen-bonded helical structure in the intermediate. By contrast, amides in helix III exchange rapidly in both proteins. Importantly, the rate of exchange of amides in helix III are slowed substantially in the Im7* variant, I72V, compared with the wild-type protein, whilst other amides exchange more rapidly in the mutant protein, in accord with the kinetics of folding/unfolding measured using chevron analysis. These data demonstrate, therefore, that local fluctuations do not dominate the exchange mechanism and confirm that helix III does not form stable secondary structure in the intermediate. By combining these results with previously obtained Phi-values, we show that the on-pathway folding intermediate of Im7 contains extensive, stable hydrogen-bonded structure in helices I, II and IV, and that this structure is stabilised by both native and non-native interactions involving amino acid side-chains in these helices.     

Rapid folding with and without populated intermediates in the homologous four-helix proteins Im7 and Im9

The kinetics and thermodynamics of the folding of the homologous four-helix proteins Im7 and Im9 have been characterised at pH 7.0 and 10 degrees C. These proteins are 60 % identical in sequence and have the same three-dimensional structure, yet appear to fold by different kinetic mechanisms. The logarithm of the folding and unfolding rates of Im9 change linearly as a function of urea concentration and fit well to an equation describing a two-state mechanism (with a folding rate of 1500 s-1, an unfolding rate of 0. 01 s-1, and a highly compact transition state that has approximately 95 % of the native surface area buried). By contrast, there is clear evidence for the population of an intermediate during the refolding of Im7, as indicated by a change in the urea dependence of the folding rate and the presence of a significant burst phase amplitude in the refolding kinetics. Under stabilising conditions (0.25 M Na2SO4, pH 7.0 and 10 degrees C) the folding of Im9 remains two-state, whilst under similar conditions (0.4 M Na2SO4, pH 7.0 and 10 degrees C) the intermediate populated during Im7 refolding is significantly stabilised (KUI=125). Equilibrium denaturation experiments, under the conditions used in the kinetic measurements, show that Im7 is significantly less stable than Im9 (DeltaDeltaG 9.3 kJ/mol) and the DeltaG and m values determined accord with those obtained from the fit to the kinetic data. The results show, therefore, that the population of an intermediate in the refolding of the immunity protein structure is defined by the precise amino acid sequence rather than the global stability of the protein. We discuss the possibility that the intermediate of Im7 is populated due to differences in helix propensity in Im7 and Im9 and the relevance of these data to the folding of helical proteins in general.     

Im7 folding mechanism: misfolding on a path to the native state

Many proteins populate collapsed intermediate states during folding. In order to elucidate the nature and importance of these species, we have mapped the structure of the on-pathway intermediate of the four-helix protein, Im7, together with the conformational changes it undergoes as it folds to the native state. Kinetic data for 29 Im7 point mutants show that the intermediate contains three of the four helices found in the native structure, packed around a specific hydrophobic core. However, the intermediate contains many non-native interactions; as a result, hydrophobic interactions become disrupted in the rate-limiting transition state before the final helix docks onto the developing structure. The results of this study support a hierarchical mechanism of protein folding and explain why the misfolding of Im7 occurs. The data also demonstrate that non-native interactions can play a significant role in folding, even for small proteins with simple topologies.     

Acidic conditions stabilise intermediates populated during the folding of Im7 and Im9

The helical bacterial immunity proteins Im7 and Im9 have been shown to fold via kinetic mechanisms of differing complexity, despite having 60 % sequence identity. At pH 7.0 and 10 degrees C, Im7 folds in a three-state mechanism involving an on-pathway intermediate, while Im9 folds in an apparent two-state transition. In order to examine the folding mechanisms of these proteins in more detail, the folding kinetics of both Im7 and Im9 (at 10 degrees C in 0.4 M sodium sulphate) have been examined as a function of pH. Kinetic modelling of the folding and unfolding data for Im7 between pH 5.0 and 8.0 shows that the on-pathway intermediate is stabilised by more acidic conditions, whilst the native state is destabilised. The opposing effect of pH on the stability of these states results in a significant population of the intermediate at equilibrium at pH 6.0 and below. At pH 7.0, the folding and unfolding kinetics for Im9 can be fitted adequately by a two-state model, in accord with previous results. However, under acidic conditions there is a clear change of slope in the plot of the logarithm of the folding rate constant versus denaturant concentration, consistent with the population of one or more intermediate(s) early during folding. The kinetic data for Im9 at these pH values can be fitted to a three-state model, where the intermediate ensemble is stabilised and the native state destabilised as the pH is reduced, rationalising previous results that showed that an intermediate is not observed experimentally at pH 7.0. The data suggest that intermediate formation is a general step in immunity protein folding and demonstrate that it is necessary to explore a wide range of refolding conditions in order to show that intermediates do not form in the folding of other small, single-domain proteins.     

Understanding how small helical proteins fold: conformational dynamics of Im proteins relevant to their folding landscapes

Understanding the mechanism of folding of small proteins requires characterization of their starting unfolded states and any partially unfolded states populated during folding. Here, we review what is known from NMR about these states of Im7, a 4-helix bundle protein that folds via an on-pathway intermediate, and show that there is an alignment of non-native structure in urea-unfolded Im7 with the helices of native Im7 that is a consequence of hydrophobic helix-promoting residues also promoting cluster-formation in the unfolded protein. We suggest that this kind of alignment is present in other proteins and is relevant to how native state topology determines folding rates.     

Native Contact Density and Nonnative Hydrophobic Effects in the Folding of Bacterial Immunity Proteins

The bacterial colicin-immunity proteins Im7 and Im9 fold by different mechanisms. Experimentally, at pH 7.0 and 10°C, Im7 folds in a three-state manner via an intermediate but Im9 folding is two-state-like. Accordingly, Im7 exhibits a chevron rollover, whereas the chevron arm for Im9 folding is linear. Here we address the biophysical basis of their different behaviors by using native-centric models with and without additional transferrable, sequence-dependent energies. The Im7 chevron rollover is not captured by either a pure native-centric model or a model augmented by nonnative hydrophobic interactions with a uniform strength irrespective of residue type. By contrast, a more realistic nonnative interaction scheme that accounts for the difference in hydrophobicity among residues leads simultaneously to a chevron rollover for Im7 and an essentially linear folding chevron arm for Im9. Hydrophobic residues identified by published experiments to be involved in nonnative interactions during Im7 folding are found to participate in the strongest nonnative contacts in this model. Thus our observations support the experimental perspective that the Im7 folding intermediate is largely underpinned by nonnative interactions involving large hydrophobics. Our simulation suggests further that nonnative effects in Im7 are facilitated by a lower local native contact density relative to that of Im9. In a one-dimensional diffusion picture of Im7 folding with a coordinate- and stability-dependent diffusion coefficient, a significant chevron rollover is consistent with a diffusion coefficient that depends strongly on native stability at the conformational position of the folding intermediate.     

Amino Acid Insertion Reveals a Necessary Three-Helical Intermediate in the Folding Pathway of the Colicin E7 Immunity Protein Im7

The small (87-residue) α-helical protein Im7 (an inhibitor protein for colicin E7 that provides immunity to cells producing colicin E7) folds via a three-state mechanism involving an on-pathway intermediate. This kinetic intermediate contains three of four native helices that are oriented in a non-native manner so as to minimise exposed hydrophobic surface area at this point in folding. The short (6-residue) helix III has been shown to be unstructured in the intermediate ensemble and does not dock onto the developing hydrophobic core until after the rate-limiting transition state has been traversed. After helix III has docked, it adopts an α-helical secondary structure, and the side chains of residues within this region provide contacts that are crucial to native-state stability. In order to probe further the role of helix III in the folding mechanism of Im7, we created a variant that contains an eight-amino-acid polyalanine-like helix stabilised by a Glu-Arg salt bridge and an Asn-Pro-Gly capping motif, juxtaposed C-terminal to the natural 6-residue helix III. The effect of this insertion on the structure of the native protein and its folding mechanism were studied using NMR and ?-value analysis, respectively. The results reveal a robust native structure that is not perturbed by the presence of the extended helix III. Mutational analysis performed to probe the folding mechanism of the redesigned protein revealed a conserved mechanism involving the canonical three-helical intermediate. The results suggest that folding via a three-helical species stabilised by both native and non-native interactions is an essential feature of Im7 folding, independent of the helical propensity of helix III.     

Structural analysis of the rate-limiting transition states in the folding of Im7 and Im9: similarities and differences in the folding of homologous proteins

The bacterial immunity proteins Im7 and Im9 fold with mechanisms of different kinetic complexity. Whilst Im9 folds in a two-state transition at pH 7.0 and 10 degrees C, Im7 populates an on-pathway intermediate under these conditions. In order to assess the role of sequence versus topology in the folding of these proteins, and to analyse the effect of populating an intermediate on the landscape for folding, we have determined the conformational properties of the rate-limiting transition state for Im9 folding/unfolding using Phi(F)-value analysis and have compared the results with similar data obtained previously for Im7. The data show that the rate-limiting transition states for Im9 and Im7 folding/unfolding are similar: both are compact (beta(T)=0.94 and 0.89, respectively) and contain three of the four native helices docked around a specific hydrophobic core. Significant differences are observed, however, in the magnitude of the Phi(F)-values obtained for the two proteins. Of the 20 residues studied in both proteins, ten have Phi(F)-values in Im7 that exceed those in Im9 by more than 0.2, and of these five differ by more than 0.4. The data suggest that the population of an intermediate in Im7 results in folding via a transition state ensemble that is conformationally restricted relative to that of Im9. The data are consistent with the view that topology is an important determinant of folding. Importantly, however, they also demonstrate that while the folding transition state may be conserved in homologous proteins that fold with two and three-state kinetics, the population of an intermediate can have a significant effect on the breadth of the transition state ensemble.     

The effect of increasing the stability of non-native interactions on the folding landscape of the bacterial immunity protein Im9

How stabilising non-native interactions influence protein folding energy landscapes is currently not well understood: such interactions could speed folding by reducing the conformational search to the native state, or could slow folding by increasing ruggedness. Here, we examine the influence of non-native interactions in the folding process of the bacterial immunity protein Im9, by exploiting our ability to manipulate the stability of the intermediate and rate-limiting transition state (TS) in the folding of this protein by minor alteration of its sequence or changes in solvent conditions. By analysing the properties of these species using Phi-value analysis, and exploration of the structural properties of the TS ensemble using molecular dynamics simulations, we demonstrate the importance of non-native interactions in immunity protein folding and demonstrate that the rate-limiting step involves partial reorganisation of these interactions as the TS ensemble is traversed. Moreover, we show that increasing the contribution to stability made by non-native interactions results in an increase in Phi-values of the TS ensemble without altering its structural properties or solvent-accessible surface area. The data suggest that the immunity proteins fold on multiple, but closely related, micropathways, resulting in a heterogeneous TS ensemble that responds subtly to mutation or changes in the solvent conditions. Thus, altering the relative strength of native and non-native interactions influences the search to the native state by restricting the pathways through the folding energy landscape.     

Conformational properties of the unfolded state of Im7 in nondenaturing conditions

The unfolded ensemble in aqueous solution represents the starting point of protein folding. Characterisation of this species is often difficult since the native state is usually predominantly populated at equilibrium. Previous work has shown that the four-helix protein, Im7 (immunity protein 7), folds via an on-pathway intermediate. While the transition states and folding intermediate have been characterised in atomistic detail, knowledge of the unfolded ensemble under the same ambient conditions remained sparse. Here, we introduce destabilising amino acid substitutions into the sequence of Im7, such that the unfolded state becomes predominantly populated at equilibrium in the absence of denaturant. Using far- and near-UV CD, fluorescence, urea titration and heteronuclear NMR experiments, we show that three amino acid substitutions (L18A–L19A–L37A) are sufficient to prevent Im7 folding, such that the unfolded state is predominantly populated at equilibrium. Using measurement of chemical shifts, ¹⁵N transverse relaxation rates and sedimentation coefficients, we show that the unfolded species of L18A–L19A–L37A deviates significantly from random-coil behaviour. Specifically, we demonstrate that this unfolded species is compact (R_h = 25 Å) relative to the urea-denatured state (R_h ≥ 30 Å) and contains local clusters of hydrophobic residues in regions that correspond to the four helices in the native state. Despite these interactions, there is no evidence for long-range stabilising tertiary interactions or persistent helical structure. The results reveal an unfolded ensemble that is conformationally restricted in regions of the polypeptide chain that ultimately form helices I, II and IV in the native state.     

Protein misfolding: optional barriers, misfolded intermediates, and pathway heterogeneity

To investigate the character and role of misfolded intermediates in protein folding, a recombinant cytochrome c without the normally blocking histidine to heme misligation was studied. Folding remains heterogeneous as in the wild-type protein. Half of the population folds relatively rapidly to the native state in a two-state manner. The other half collapses (fluorescence quenching) and forms a full complement of helix (CD) with the same rate and denaturant dependence as the fast folding fraction but then is blocked and reaches the native structure (695nm absorbance) much more slowly. The factors that transiently block folding are not intrinsic to the folding process but depend on ambient conditions, including protein aggregation (f(concentration)), N terminus to heme misligation (f(pH)), and proline mis-isomerization (f(U state equilibration time)). The misfolded intermediate populated by the slowly folding fraction was characterized by hydrogen exchange pulse labeling. It is very advanced with all of the native-like elements fairly stably formed but not the final Met80-S to heme iron ligation, similar to a previously studied molten globule form induced by low pH. To complete final native state acquisition, some small back unfolding is required (error repair) but the misfolded intermediate does not revisit the U state before proceeding to N. These properties show that the intermediate is a normal on-pathway form that contains, in addition, adventitious misfolding errors that transiently block its forward progress. Related observations for other proteins (partially misfolded intermediates, pathway heterogeneity) might be similarly explained in terms of the optional insertion of error-dependent barriers into a classical folding pathway.     

Sulfate-induced effects in the on-pathway intermediate of the bacterial immunity protein Im7

Intermediates have now been identified in the folding of a number of small, single-domain proteins. Here we describe experiments to determine the effect of Na(2)SO(4) on the properties of the on-pathway intermediate formed early during the folding of the four-helical protein, Im7. This intermediate, studied previously in 0.4 M Na(2)SO(4), contains three of the four native helices and is fascinating in that several residues in helices I, II, and IV make non-native interactions that stabilize this state. Whether these contacts form as a consequence of the presence of Na(2)SO(4), however, remained unresolved. Using kinetic analysis of the effect of Na(2)SO(4) on the unfolding and refolding kinetics of Im7*, combined with detailed analysis of the resulting chevron plots, we show that decreasing the concentration of Na(2)SO(4) from 0.4 to 0 M destabilizes the intermediate and rate-limiting transition (TS2) states by 7 and 10 kJ mol(-)(1), respectively, and has little effect on the relative compactness of these states compared with that of the unfolded ensemble (beta(I) approximately 0.8, beta(TS2) approximately 0.9 in 0 to 0.4 M Na(2)SO(4)). Analysis of 10 variants of the protein in 0.2 M Na(2)SO(4) using Phi-values showed that the structural properties of the intermediate and TS2 are not altered significantly by the concentration of the kosmotrope. The data demonstrate that the rapid formation of a compact intermediate stabilized by non-native interactions during Im7* folding is not induced by high concentrations of the stabilizing salt, but is a generic feature of the folding of this protein.     

Trapping the on-pathway folding intermediate of Im7 at equilibrium

The four-helical protein Im7 folds via a rapidly formed on-pathway intermediate (k(UI)=3000 s(-1) at pH 7.0, 10 degrees C) that contains three (helices I, II and IV) of the four native alpha-helices. The relatively slow (k(IN)=300 s(-1)) conversion of this intermediate into the native structure is driven by the folding and docking of the six residue helix III onto the developing hydrophobic core. Here, we describe the structural properties of four Im7* variants designed to trap the protein in the intermediate state by disrupting the stabilising interactions formed between helix III and the rest of the protein structure. In two of these variants (I54A and L53AI54A), hydrophobic residues within helix III have been mutated to alanine, whilst in the other two mutants the sequence encompassing the native helix III was replaced by a glycine linker, three (H3G3) or six (H3G6) residues in length. All four variants were shown to be monomeric, as judged by analytical ultracentrifugation, and highly helical as measured by far-UV CD. In addition, all the variants denature co-operatively and have a stability (DeltaG(UF)) and buried hydrophobic surface area (M(UF)) similar to those of the on-pathway kinetic intermediate. Structural characterisation of these variants using 1-anilino-8-napthalene sulphonic acid (ANS) binding, near-UV CD and 1D (1)H NMR demonstrate further that the trapped intermediate ensemble is highly structured with little exposed hydrophobic surface area. Interestingly, however, the structural properties of the variants I54A and L53AI54A differ in detail from those of H3G3 and H3G6. In particular, the single tryptophan residue, located near the end of helix IV, and distant from helix III, is in a distinct environment in the two sets of mutants as judged by fluorescence, near-UV CD and the sensitivity of tryptophan fluorescence to iodide quenching. Overall, the results confirm previous kinetic analysis that demonstrated the hierarchical folding of Im7 via an on-pathway intermediate, and show that this species is a highly helical ensemble with a well-formed hydrophobic core. By contrast with the native state, however, the intermediate ensemble is flexible enough to change in response to mutation, its structural properties being tailored by residues in the sequence encompassing the native helix III.     

Extending the folding nucleus of ubiquitin with an independently folding beta-hairpin finger: hurdles to rapid folding arising from the stabilisation of local interactions

The N-terminal beta-hairpin sequence of ubiquitin has been implicated as a folding nucleation site. To extend and stabilise the ubiquitin folding nucleus, we have inserted an autonomously folding 14-residue peptide sequence beta4 which in isolation forms a highly populated beta-hairpin (>70%) stabilised by local interactions. NMR structural analysis of the ubiquitin mutant (Ubeta4) shows that the hairpin finger is fully structured and stabilises ubiquitin by approximately 8kJmol(-1). Protein engineering and kinetic (phi(F)-value) analysis of a series of Ubeta4 mutants shows that the hairpin extension of Ubeta4 is also significantly populated in the transition state (phi(F)-values >0.7) and has the effect of templating the formation of native contacts in the folding nucleus of ubiquitin. However, at low denaturant concentrations the chevron plot of Ubeta4 shows a small deviation from linearity (roll-over effect), indicative of the population of a compact collapsed state, which appears to arise from over-stabilisation of local interactions. Destabilising mutations within the native hairpin sequence and within the engineered hairpin extension, but not elsewhere, eliminate this non-linearity and restore apparent two-state behaviour. The pitfall to stabilising local interactions is to present hurdles to the rapid and efficient folding of small proteins down a smooth folding funnel by trapping partially folded or misfolded states that must unfold or rearrange before refolding.     

Low energy pathways and non-native interactions: the influence of artificial disulfide bridges on the mechanism of folding

Four versions of a beta-sheet protein (CD2.d1) have been made, each with a single artificial disulfide bond inserted into hairpin structures. Folding kinetics of reduced and oxidized forms shows bridge position strongly influences its effect on the folding reaction. Bridging residues 58 and 62 does not affect the rapidly formed intermediate (I) or rate-limiting transition (t) state, whereas bridging 33 and 38, or 31 and 41, lowers the t-state energy, with the latter having the stronger influence. Bridging residues 79 and 90 stabilizes both I- and t-states. To assess additivity in the energetic effects of these bridges, four double-bridge variants have also been made. All show precise additivity of overall stability, with two showing additivity when ground states and the rate-limiting t-state are assessed, i.e. no measurable change in the folding mechanism occurs. However, combining 31-41 and 79-90 bridges produces a molecule that folds through a different pathway, with a much more stable intermediate than expected and a much higher t-state barrier. This is explained by the artificial introduction of stabilizing, non-native contacts in the I-state. More surprisingly, for another double-bridge version (58-62 and 79-90) both I- and t-states are less stable than expected, showing that conformational constraints introduced by the two bridges prevent formation of non-native contacts that would otherwise stabilize the I- and t-states, thereby lowering the energy of the folding landscape in the wild-type (unbridged) molecule. We conclude that the lowest energy path for folding has I- and t-state structures that are stabilized by non-native interactions.     

Aromatic residues engineered into the beta-turn nucleation site of ubiquitin lead to a complex folding landscape, non-native side-chain interactions, and kinetic traps

The fast folding of small proteins is likely to be the product of evolutionary pressures that balance the search for native-like contacts in the transition state with the minimum number of stable non-native interactions that could lead to partially folded states prone to aggregation and amyloid formation. We have investigated the effects of non-native interactions on the folding landscape of yeast ubiquitin by introducing aromatic substitutions into the beta-turn region of the N-terminal beta-hairpin, using both the native G-bulged type I turn sequence (TXTGK) as well as an engineered 2:2 XNGK type I' turn sequence. The N-terminal beta-hairpin is a recognized folding nucleation site in ubiquitin. The folding kinetics for wt-Ub (TLTGK) and the type I' turn mutant (TNGK) reveal only a weakly populated intermediate, however, substitution with X = Phe or Trp in either context results in a high propensity to form a stable compact intermediate where the initial U-->I collapse is visible as a distinct kinetic phase. The introduction of Trp into either of the two host turn sequences results in either complex multiphase kinetics with the possibility of parallel folding pathways, or formation of a highly compact I-state stabilized by non-native interactions that must unfold before refolding. Sequence substitutions with aromatic residues within a localized beta-turn capable of forming non-native hydrophobic contacts in both the native state and partially folded states has the undesirable consequence that folding is frustrated by the formation of stable compact intermediates that evolutionary pressures at the sequence level may have largely eliminated.     

NMR characterisation of the relationship between frustration and the excited state of Im7

Previous work shows that Im9 folds in a two-state transition while its homologue Im7 folds in a three-state transition via an on-pathway kinetic intermediate state (KIS), with this difference being related to frustration in the structure of Im7. We have used NMR spectroscopy to study conformational dynamics connected to the frustration. A combination of equilibrium peptide N¹H/N²H exchange, model-free analyses of backbone NH relaxation data and relaxation dispersion (RD)-NMR shows that the native state of Im7 is in equilibrium with an intermediate state that is lowly populated [equilibrium intermediate state (EIS)]. Comparison of kinetic and thermodynamic parameters describing the EIS native-state equilibrium obtained by RD-NMR with previously reported parameters describing the KIS native-state equilibrium obtained from stopped-flow fluorescence studies of refolding His-tagged Im7 shows that the KIS and the EIS are the same species. ¹⁵N chemical shifts of the EIS obtained from the RD-NMR analysis show that residues forming helix III in the native state are unstructured in the EIS while other residues experiencing frustration in the native state are in structured regions of the EIS. We show that binding of Im7 and its L53A/I54A variant (which resembles the EIS as shown in previous work) to the cognate partner for Im7, the DNase domain of colicin E7, causes the dynamic processes associated with the frustration to be dampened.     

Comparison of the transition state ensembles for folding of Im7 and Im9 determined using all-atom molecular dynamics simulations with phi value restraints

Delineation of the structural properties of transition states is key to deriving models for protein folding. Here we describe the structures of the transition states of the bacterial immunity proteins Im7 and Im9 obtained by all-atom molecular dynamics simulations with phi value restraints derived from protein engineering experiments. This pair of proteins is of special interest because, at pH 7 and 10 degrees C, Im7 folds via an intermediate while Im9 folds with a two-state transition. The structures of the transition states for Im7 and Im9, together with their radii of gyration and distances from the native state, are similar. The typical distance between any two members of the transition state ensemble of both proteins is large, with that of Im9 nearly twice that of Im7. Thus, a broad range of structures make up the transition state ensembles of these proteins. The ensembles satisfy the set of rather low phi values and yet are consistent with high beta(T) values (> 0.85 for both proteins). For both Im7 and Im9 the inter-helical angles are highly variable in the transition state ensembles, although the native contacts between helices I and IV are well conserved. By measuring the distribution of the accessible surface area for each residue we show that the hydrophobic residues that are buried in the native state remain buried in the transition state, corresponding to a hydrophobic collapse to a relatively ordered globule. The data provide new insights into the structural properties of the transition states of these proteins at an atomic level of detail and show that molecular dynamics simulations with phi value restraints can significantly enhance the knowledge of the transition state ensembles (TSE) provided by the experimental phi values alone.     

Thermodynamics and kinetics of non-native interactions in protein folding: a single point mutant significantly stabilizes the N-terminal domain of L9 by modulating non-native interactions in the denatured state

Comparatively little is known about the role of non-native interactions in protein folding and their role in both folding and stability is controversial. We demonstrate that non-native electrostatic interactions involving specific residues in the denatured state can have a significant effect upon protein stability and can persist in the transition state for folding. Mutation of a single surface exposed residue, Lys12 to Met, in the N-terminal domain of the ribosomal protein L9 (NTL9), significantly increased the stability of the protein and led to faster folding. Structural and energetic studies of the wild-type and K12M mutant show that the 1.9 kcal mol(-1) increase in stability is not due to native state effects, but rather is caused by modulation of specific non-native electrostatic interactions in the denatured state. pH dependent stability measurements confirm that the increased stability of the K12M is due to the elimination of favorable non-native interactions in the denatured state. Kinetic studies show that the non-native electrostatic interactions involving K12 persist in the transition state. The analysis demonstrates that canonical Phi-values can arise from the disruption of non-native interactions as well as from the development of native interactions.     

NMR analysis of the conformational properties of the trapped on-pathway folding intermediate of the bacterial immunity protein Im7

Previous work shows that the transiently populated, on-pathway intermediate in Im7 folding contains three of the four native alpha-helices docked around a core stabilised by native and non-native interactions. To determine the structure and dynamic properties of this species in more detail, we have used protein engineering to trap the intermediate at equilibrium and analysed the resulting proteins using NMR spectroscopy and small angle X-ray scattering. Four variants were created. In L53AI54A, two hydrophobic residues within helix III are truncated, preventing helix III from docking stably onto the developing hydrophobic core. In two other variants, the six residues encompassing the native helix III were replaced with three (H3G3) or six (H3G6) glycine residues. In the fourth variant, YY, two native tyrosine residues (Tyr55 and Tyr56) were re-introduced into H3G6 to examine their role in determining the properties of the intermediate ensemble. All four variants show variable peak intensities and broad peak widths, consistent with these proteins being conformationally dynamic. Chemical shift analyses demonstrated that L53AI54A and YY contain native-like secondary structure in helices I and IV, while helix II is partly formed and helix III is absent. Lack of NOEs and rapid NH exchange for L53AI54A, combined with detailed analysis of the backbone dynamics, indicated that the hydrophobic core of this variant is not uniquely structured, but fluctuates on the NMR timescale. The results demonstrate that though much of the native-like secondary structure of Im7 is present in the variants, their hydrophobic cores remain relatively fluid. The comparison of H3G3/H3G6 and L53AI54A/YY suggests that Tyr55 and/or Tyr56 interact with the three-helix core, leading other residues in this region of the protein to dock with the core as folding progresses. In this respect, the three-helix bundle acts as a template for formation of helix III and the creation of the native fold.