A single oligonucleotide can be used to rapidly isolate DNA sequences flanking a transposon Tn5 insertion by the polymerase chain reaction.

We have developed a strategy to rapidly construct DNA hybridization probes for the isolation of genes disrupted by transposon Tn5 insertions. A single oligonucleotide complementary to and extending outward from the ends of the inverted repeat of Tn5 was used to prime DNA synthesis in the polymerase chain reaction. The amplified product consisted of DNA sequences adjacent to both ends of the transposon insertion. The general feasibility of the approach was tested by amplifying pBR322 sequences from a derivative of pBR322 containing a Tn5 insertion. To amplify genomic DNA sequences flanking a Tn5 insertion in the chromosome of a Pseudomonas syringae strain, circular substrates were generated by ligating EcoRI-digested genomic DNA. Tn5 was contained intact within one such circular molecule, as the transposon does not contain sites for cleavage by EcoRI. The amplified product (approximately 2.5 kb) was used as a DNA hybridization probe to isolate the homologous fragment from a cosmid library of wild-type Pseudomonas syringae genomic DNA. This approach may be applied to the efficient isolation of sequences flanking any Tn5 insertion.     

A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation (Ds) transposon lines with insertions on all 5 Arabidopsis chromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsis genome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsis lines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.     

An alternative inverse PCR (IPCR) method to amplify DNA sequences flanking Tn5 transposon insertions

We have developed an alternative method to amplify DNA sequences flanking Tn5 transposon insertions. This method relies on the identical sequences of inverted terminal repeats, located at the 5' and 3' ends of Tn5, to determine the location and orientation of a transposon insertion within a restriction endonuclease fragment. From this information, PCR primers can be designed to selectively amplify by inverse PCR the DNA flanking one side of the transposon. This method avoids the problem of amplifying or cloning long sequences flanking Tn5. To demonstrate the applicability of this method, we generated Tn5 transposon mutants of Pseudomonas abietaniphila BKME-9 which no longer grew on dehydroabietic acid (DhA). The flanking sequence of one of the mutant (strain BKME-941) which accumulated 7-oxoDhA, was amplified.     

A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation(Ds) transposon lines with insertions on all 5 Arabidopsischromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsisgenome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsislines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.     

Rapid amplification and cloning of Tn5 flanking fragments by inverse PCR

A simple approach is described to efficiently amplify DNA sequences flanking transposon Tn5 insertions. The method involves: (i) digestion with a restriction enzyme that cuts within Tn5; (ii) self-ligation under conditions favouring the production of monomeric circles; (iii) four parallel PCR reactions using primers designed to amplify left or right flanking sequences, and to distinguish target amplicons from non-specific products. This reveals the number of Tn5 insertions and the size of flanking genomic restriction fragments, without Southern blot analysis. The amplified product contains restriction sites that facilitate cohesive-end cloning. This rapid method is demonstrated using Tn5 and Tn5-Mob tagged DNA sequences involved in albicidin biosynthesis in Xanthomonas albilineans. It is generally applicable for efficient recovery of DNA sequences flanking transposon Tn5 derivatives in insertional mutagenesis studies.     

Amplification and detection of transposon insertion flanking sequences using fluorescent muAFLP

The amplification of transposon insertionflanking sequences is the basis of a variety of techniques usedfor the detection and characterization of specific transposon insertion events. We have developed a method for the efficient size determination and quantification of amplified genomic sequences thatflank Mutator (Mu) transposon insertions in maize. Using this detection method, we have been able to optimize Mu insertion site amplification and to assess amplification from increasingly complex templates representing increasing numbers of Mu-active maize plants. This detection method should be applicablefor the characterization of transposon or transgene insertion events in a wide variety of organisms.     

ESSENTIALS: Software for Rapid Analysis of High Throughput Transposon Insertion Sequencing Data

High-throughput analysis of genome-wide random transposon mutant libraries is a powerful tool for (conditional) essential gene discovery. Recently, several next-generation sequencing approaches, e.g. Tn-seq/INseq, HITS and TraDIS, have been developed that accurately map the site of transposon insertions by mutant-specific amplification and sequence readout of DNA flanking the transposon insertions site, assigning a measure of essentiality based on the number of reads per insertion site flanking sequence or per gene. However, analysis of these large and complex datasets is hampered by the lack of an easy to use and automated tool for transposon insertion sequencing data. To fill this gap, we developed ESSENTIALS, an open source, web-based software tool for researchers in the genomics field utilizing transposon insertion sequencing analysis. It accurately predicts (conditionally) essential genes and offers the flexibility of using different sample normalization methods, genomic location bias correction, data preprocessing steps, appropriate statistical tests and various visualizations to examine the results, while requiring only a minimum of input and hands-on work from the researcher. We successfully applied ESSENTIALS to in-house and published Tn-seq, TraDIS and HITS datasets and we show that the various pre- and post-processing steps on the sequence reads and count data with ESSENTIALS considerably improve the sensitivity and specificity of predicted gene essentiality.     

A two-component enhancer-inhibitor transposon mutagenesis system for functional analysis of the Arabidopsis genome.

A modified Enhancer-Inhibitor transposon system was used to generate a series of mutant lines by single-seed descent such that multiple I insertions occurred per plant. The distribution of original insertions in the population was assessed by isolating transposon-flanking DNA, and a database of insertion sites was created. Approximately three-quarters of the identified insertion sites show similarity to sequences stored in public databases, which demonstrates the power of this regimen of insertional mutagenesis. To isolate insertions in specific genes, we developed three-dimensional pooling and polymerase chain reaction strategies that we then validated by identifying mutants for the regulator genes APETALA1 and SHOOT MERISTEMLESS. The system then was used to identify inserts in a class of uncharacterized genes involved in lipid biosynthesis; one such insertion conferred a fiddlehead mutant phenotype.     

Molecular analysis of high-copy insertion sites in maize

High-copy transposon mutagenesis is an effective tool for creating gene disruptions in maize. In order to molecularly define transposon-induced disruptions on a genome-wide scale, we optimized TAIL-PCR to amplify genomic DNA flanking maize Robertson’s Mutator insertions. Sample sequencing from 43 Mutator stocks and the W22 inbred line identified 676 non-redundant insertions, and only a small fraction of the flanking sequences showed significant similarity to maize repetitive sequences. We further designed and tested 79 arbitrary primers to identify 12 primers that amplify all Mutator insertions within a DNA sample at 3.1-fold redundancy. Importantly, the products are of sufficient size to use as substrates or probes for hybridization-based identification of gene disruptions. Our adaptation simplifies previously published TAIL-PCR protocols and should be transferable to other high-copy insertional mutagens.     

An improved transposon for the halophilic archaeon Haloarcula hispanica

An improved transposon (ThD73) for Haloarcula hispanica is described. Based on the halobacterial insertion sequence ISH28, it showed little target sequence specificity but was biased toward a lower G+C content. Twenty randomly selected ThD73 mutants were analyzed, and the DNA flanking their insertions revealed several recognizable sequences, including two (unrelated) ISH elements.     

Sleeping Beauty transposition in the mouse genome is associated with changes in DNA methylation at the site of insertion

The Sleeping Beauty (SB) transposon (Tn) system is a nonviral gene delivery tool that has widespread application for transfer of therapeutic genes into the mammalian genome. To determine its utility as a gene delivery system, it was important to assess the epigenetic modifications associated with SB insertion into the genome and potential inactivation of the transgene. This study investigated the DNA methylation pattern of an SB Tn as well as the flanking genomic region at insertion sites in the mouse genome. The ubiquitous ROSA26 promoter and an initial part of the eGFP coding sequence in the SB Tn exhibited high levels of CpG methylation in transgenic mouse lines, irrespective of the chromosomal loci of the insertion sites. In contrast, no detectable CpG methylation in the endogenous mouse ROSA26 counterpart was observed in the same animals. Furthermore, significant hypomethylation was detected in neighboring chromosomal sequences of two unique SB Tn insertions compared to wild-type patterns. Taken together, these results suggest that SB Tn insertions into the mouse genome can be discriminated by DNA methylation machinery from an identical endogenous DNA sequence and can profoundly alter the DNA methylation status of the transgene cargo as well as flanking host genomic regions.     

Establishment of an arbitrary PCR for rapid identification of Tn917 insertion sites in Staphylococcus epidermidis: characterization of biofilm-negative and nonmucoid mutants

Transposon mutagenesis with the Enterococcus faecalis transposon Tn917 is a genetic approach frequently used to identify genes related with specific phenotypes in gram-positive bacteria. We established an arbitrary PCR for the rapid and easy identification of Tn917 insertion sites in Staphylococcus epidermidis with six independent, well-characterized biofilm-negative Tn917 transposon mutants, which were clustered in the icaADBC gene locus or harbor Tn917 in the regulatory gene rsbU. For all six of these mutants, short chromosomal DNA fragments flanking both transposon ends could be amplified. All fragments were sufficient to correctly identify the Tn917 insertion sites in the published S. epidermidis genomes. By using this technique, the Tn917 insertion sites of three not-yet-characterized biofilm-negative or nonmucoid mutants were identified. In the biofilm-negative and nonmucoid mutant M12, Tn917 is inserted into a gene homologous to the regulatory gene purR of Bacillus subtilis and Staphylococcus aureus. The Tn917 insertions of the nonmucoid but biofilm-positive mutants M16 and M20 are located in genes homologous to components of the phosphoenolpyruvate-sugar phosphotransferase system (PTS) of B. subtilis, S. aureus, and Staphylococcus carnosus, indicating an influence of the PTS on the mucoid phenotype in S. epidermidis.     

Human transposon-like elements insert at a preferred target site: evidence for a retrovirally mediated process.

Members of the human transposon-like family of repetitive sequences (called THE 1 repeats) like many other repetitive DNA sequences are flanked by short direct repeats. Comparison of the base sequences of twelve examples of these flanking direct repeats indicates that THE 1 repeats insert into a preferred genomic target site. In one case, we have identified the sequence of an empty site into which a THE 1 element inserted. The sequence of this empty site and sequences of truncated THE 1 LTRs are consistent with a retroviral mechanism for the insertion of THE 1 elements. Truncated transposon structures illustrate for the first time that intermediate structures of retrotransposition may also be integrated into the genome.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

Insertion sites and the terminal nucleotide sequences of the Tn4 transposon.

The nucleotide sequences at the ends of the Tn4 transposon (mercury spectinomycin and sulfonamide resistance) have been determined. They are inverted repeated sequences of 38 nucleotides with three mismatched base pairs. These sequences are strongly homologous with the terminal sequences of Tn501 (mercury resistance) but less so with those of Tn3 (ampicillin resistance). The Tn4 transposon generates pentanucleotide members (Tn3, Tn1000, Tn501, Tn551, IS2) with the exception of Tn1721 and bacteriophage Mu. Among the three Tn4 insertion sites examined here, two of them occurred near a nonanucleotide sequence in perfect homology with part of the terminal inverted-repeat sequence of Tn4 and the third insertion occurred near a sequence of partial homology to one end of Tn4. All three insertions were in the same orientation such that IRb is proximal to its homologous sequence on the recipient DNA.     

Molecular screening for P-element insertions in a large genomic region of Drosophila melanogaster using polymerase chain reaction mediated by the vectorette.

As an alternative to existing methods for the detection of new insertions during a transposon mutagenesis, we adapted the method of vectorette ligation to genomic restriction fragments followed by PCR to obtain genomic sequences flanking the transposon. By combining flies containing a defined genomic transposon with an excess of flies containing unrelated insertion sites, we demonstrate the specificity and sensitivity of the procedure in the detection of integration events. This method was applied in a transposon-tagging screen for BJ1, the Drosophila homolog of the vertebrate gene Regulator of Chromosome Condensation (RCCI). Genetic mobilization of a single genomic P element was used to generate preferentially new local insertions from which integrations into a genomic region surrounding the BJ1 gene were screened. Flies harboring new insertions were phenotypically selected on the basis of the zeste1-dependent transvection of white. We detected a single transposition to a 13-kb region close to the BJ1 gene among 6650 progeny that were analyzed. Southern analysis of the homozygous line confirmed the integration 3 kb downstream of BJ1.