Activity and conformation of a cyclic heptapeptide possessing the message sequence His-Phe-Arg-Trp of alpha-melanotropin

Alpha-melanotropin (alpha-MSH, i.e. alpha-melanocyte stimulating hormone), tridecapeptide (Ac-Ser(1)-Tyr-Ser-Met-G1u(5)-His-Phe-Arg-Trp-Gly(10)-Lys-Pro-Val(13)-NH(2)), has been extensively studied to understand structure-activity relationships. The core sequence (His-Phe-Arg-Trp) is conserved in several species and is considered as the primary active site or "message sequence". Attempts have been made to design conformationally constrained cyclic analogs containing the message sequence to improve the activity. We had earlier reported that the cyclic analog--cyclo[Gly-His-D-Phe-Arg-Trp-Gly], a 18 membered ring system with two fused beta-turn structure, was less active than the corresponding linear peptide. It was suggested that ring size could be an important parameter in the activity of cyclic melanotropic analogs. To investigate the effect of ring size on biological activity, a cyclic heptapeptide, cyclo[Nle(1)-Gly-His-D-Phe-Arg(5)-Trp-Gly(7)], with 21 member ring system was synthesized. This peptide has three orders of magnitude higher biological activity than the cyclic hexapeptide. The conformational study of this cyclic heptapeptide in DMSO-d(6) by NMR and molecular dynamics simulations reveals a structure with two fused beta-turns running across the residues D-Phe(4)-Gly(7) (Type I) and Gly(7)-His(3) (Type II). These findings confirm that stabilization of beta-turns and a relatively larger ring size are essential determinants of activity for cyclic alpha-MSH analogs.     

Evidence for the presence of a secondary structure at the dibasic processing site of prohormone: the pro-ocytocin model.

Bioactivation of pro-proteins by limited proteolysis is a general mechanism in the biosynthesis of hormones, receptors and viral protein precursors. This proceeds by cleavage of peptide bonds at the level of single or pairs of basic residues in the proforms. Examination of a number of cleavage loci in various precursors failed to reveal any consensus primary sequence around the dibasic cleavage sites. Thus it has been proposed, on the basis of secondary structure predictions [Rholam, M., Nicolas, P. and Cohen, P. (1986) FEBS Lett., 207, 1-6], that those basic residues which operate as signal loci for the proteolytic enzyme machinery are situated in, or next to, privileged precursor regions most often constituted by flexible and exposed motifs, e.g. beta-turns and/or loops. Peptides reproducing the N-terminal processing domain of the hormone precursor, pro-ocytocin-neurophysin, were examined by a combination of spectroscopical techniques including circular dichroism, infrared Fourier transform and one- and two-dimensional proton NMR. The results indicate that: (i) the region situated on the N terminus of the Lys-Arg doublet is organized as a beta-turn in solution; (ii) the sequential organization of the residues participating in the beta-turn determines the privileged relative orientation of the basic amino acid side chains and the subtype of turn; (iii) the peptide segment situated on the C-terminal side of the dibasic, corresponding to the N-terminal octapeptide of neurophysin, is organized as an alpha-helix.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. I. Model studies using cyclic and linear peptides.

The high molecular weight (HMW) proteins from wheat contain a repetitive domain that forms 60-80% of their sequence. The consensus peptides PGQGQQ and GYYPTSPQQ form more than 90% of the domain; both are predicted to adopt beta-turn structure. This paper describes the structural characterization of these consensus peptides and forms the basis for the structural characterization of the repetitive HMW domain, described in the companion paper. The cyclic peptides cyclo-[PGQGQQPGQGQQ] (peptide 1), cyclo-[GYYPTSPQQGA] (peptide 2), and cyclo-[PGQGQQGYYPTSPQQ] (peptide 3) were prepared using a novel synthesis route. In addition, the linear peptides (PGQGQQ)n (n = 1, 3, 5) were prepared. CD, FTIR, and NMR data demonstrated a type II beta-turn structure at QPGQ in the cyclic peptide 1 that was also observed in the linear peptides 9PGQGQQ)n. A type I beta-turn was observed at YPTS and SPQQ in peptides 2 and 3, with additional beta-turns of either type I or II at GAGY (peptide 2) and QQGY (peptide 3). The proline in YPTS showed considerable cis/trans isomerization, with up to 50% of the population in the cis-conformation; the other prolines were more than 90% in the trans conformation. The conversion from trans to cis destroys the type I beta-turn at YPTS, but leads to an increase in turn character at SPQQ and GAGY (peptide 2) or QQGY (peptide 3).     

Design, structure and biological activity of beta-turn peptides of CD2 protein for inhibition of T-cell adhesion.

The interaction between cell-adhesion molecules CD2 and CD58 is critical for an immune response. Modulation or inhibition of these interactions has been shown to be therapeutically useful. Synthetic 12-mer linear and cyclic peptides, and cyclic hexapeptides based on rat CD2 protein, were designed to modulate CD2-CD58 interaction. The synthetic peptides effectively blocked the interaction between CD2-CD58 proteins as demonstrated by antibody binding, E-rosetting and heterotypic adhesion assays. NMR and molecular modeling studies indicated that the synthetic cyclic peptides exhibit beta-turn structure in solution and closely mimic the beta-turn structure of the surface epitopes of the CD2 protein. Docking studies of CD2 peptides and CD58 protein revealed the possible binding sites of the cyclic peptides on CD58 protein. The designed cyclic peptides with beta-turn structure have the ability to modulate the CD2-CD58 interaction.     

Structural engineering of the HIV-1 protease molecule with a beta-turn mimic of fixed geometry.

An important goal in the de novo design of enzymes is the control of molecular geometry. To this end, an analog of the protease from human immunodeficiency virus 1 (HIV-1 protease) was prepared by total chemical synthesis, containing a constrained, nonpeptidic type II' beta-turn mimic of predetermined three-dimensional structure. The mimic beta-turn replaced residues Gly16,17 in each subunit of the homodimeric molecule. These residues constitute the central amino acids of two symmetry-related type I' beta-turns in the native, unliganded enzyme. The beta-turn mimic-containing enzyme analog was fully active, possessed the same substrate specificity as the Gly16,17-containing enzyme, and showed enhanced resistance to thermal inactivation. These results indicate that the precise geometry of the beta-turn at residues 15-18 in each subunit is not critical for activity, and that replacement of the native sequence with a rigid beta-turn mimic can lead to enhanced protein stability. Finally, the successful incorporation of a fixed element of secondary structure illustrates the potential of a "molecular kit set" approach to protein design and synthesis.     

Designed beta-hairpin peptides with defined tight turn stereochemistry

The conformational analysis of two synthetic octapeptides, Boc-Leu-Val-Val-D-Pro-L-Ala-Leu-Val-Val-OMe (1) and Boc-Leu-Val-Val-D-Pro-D-Ala-Leu-Val-Val-OMe (2) has been carried out in order to investigate the effect of beta-turn stereochemistry on designed beta-hairpin structures. Five hundred megahertz (1)H NMR studies establish that both peptides 1 and 2 adopt predominantly beta-hairpin conformations in methanol solution. Specific nuclear Overhauser effects provide evidence for a type II' beta-turn conformation for the D-Pro-L-Ala segment in 1, while the NMR data suggest that the type I' D-Pro-D-Ala beta-turn conformation predominates in peptide 2. Evidence for a minor conformation in peptide 2, in slow exchange on the NMR time scale, is also presented. Interstrand registry is demonstrated in both peptides 1 and 2. The crystal structure of 1 reveals two independent molecules in the crystallographic asymmetric unit, both of which adopt beta-hairpin conformations nucleated by D-Pro-L-Ala type II' beta-turns and are stabilized by three cross-strand hydrogen bonds. CD spectra for peptides 1 and 2 show marked differences, presumably as a consequence of the superposition of spectral bands arising from both beta-turn and beta-strand conformations.     

Conformational features of a synthetic model of the first extracellular loop of the angiotensin II AT1A receptor.

The angiotensin II AT1A receptor belongs to the G-protein coupled receptors (GPCRs). Like other membrane proteins, GPCRs are not easily amenable to direct structure determination by the currently available methods. The peptide encompassing the putative first extracellular loop of AT1A (residues Thr88-Leu100, el1) has been synthesized along with a cyclic model where the linear peptide has been covalently linked to a template designed to keep the distance between the peptide termini as expected in the receptor. The conformational features of the two molecules have been studied using circular dichroism and NMR techniques. The region W94PFG97 forms a type-II beta-turn and undergoes a Trp-Pro peptide bond cis-trans isomerization in both peptides confirming that these characteristics are intrinsic to el1. In addition, the presence of the spacer seems to modulate the flexibility of the peptide.     

A neural network method for prediction of beta-turn types in proteins using evolutionary information

MOTIVATION: The prediction of beta-turns is an important element of protein secondary structure prediction. Recently, a highly accurate neural network based method Betatpred2 has been developed for predicting beta-turns in proteins using position-specific scoring matrices (PSSM) generated by PSI-BLAST and secondary structure information predicted by PSIPRED. However, the major limitation of Betatpred2 is that it predicts only beta-turn and non-beta-turn residues and does not provide any information of different beta-turn types. Thus, there is a need to predict beta-turn types using an approach based on multiple sequence alignment, which will be useful in overall tertiary structure prediction. RESULTS: In the present work, a method has been developed for the prediction of beta-turn types I, II, IV and VIII. For each turn type, two consecutive feed-forward back-propagation networks with a single hidden layer have been used where the first sequence-to-structure network has been trained on single sequences as well as on PSI-BLAST PSSM. The output from the first network along with PSIPRED predicted secondary structure has been used as input for the second-level structure-to-structure network. The networks have been trained and tested on a non-homologous dataset of 426 proteins chains by 7-fold cross-validation. It has been observed that the prediction performance for each turn type is improved significantly by using multiple sequence alignment. The performance has been further improved by using a second level structure-to-structure network and PSIPRED predicted secondary structure information. It has been observed that Type I and II beta-turns have better prediction performance than Type IV and VIII beta-turns. The final network yields an overall accuracy of 74.5, 93.5, 67.9 and 96.5% with MCC values of 0.29, 0.29, 0.23 and 0.02 for Type I, II, IV and VIII beta-turns, respectively, and is better than random prediction. AVAILABILITY: A web server for prediction of beta-turn types I, II, IV and VIII based on above approach is available at http://www.imtech.res.in/raghava/betaturns/ and http://bioinformatics.uams.edu/mirror/betaturns/ (mirror site).     

Structural analysis of fertilin(beta) cyclic peptide mimics that are ligands for alpha6beta1 integrin.

The NMR structural analysis of two fertilin(beta) mimics cyclo(EC2DC1)YNH2, 1, and cyclo(D2EC2D1C1)YNH2, 2 is described. Both of these mimics are moderate inhibitors of sperm-egg binding with IC50 values of 500 microm in a mouse in vitro fertilization assay. For peptide 1, the optimized conformations that best match the NMR data have a pseudo-type II' beta-turn with the linker and Glu at the i+1 and i+2 positions, respectively. The EC2D1C1 sequence is in a nonclassical (type IV) beta-turn. For peptide 2, the conformation that best matches the NMR data has two turns: a pseudo-type II' beta-turn in the D2EC2D1 sequence followed by a nonclassical beta-turn in the EC2D1C1 sequence. The Cbeta-Cbeta distance between E and D1 in peptide 1 is 9.1 A, in peptide 2, it is 7.7 A. Thus, one possibility for the high IC50 values of these cyclic peptides is that the acidic residues are not constrained to a sufficiently tight turn, and thus much entropy must still be lost upon binding to the alpha6beta1 integrin. This explains why the cyclic peptides are the same as linear peptides at inhibiting sperm-egg binding.     

Conformational study of linear and cyclic peptides corresponding to the 276-284 epitope region of HSV gD-1

The results of conformational analysis of linear and cyclic peptides from the 276SALLEDPVG(284) sequence of glycoprotein D of Herpes simplex virus are presented. The epitope peptides were synthesized by SPPS and on resin cyclization was applied for preparation of cyclic compounds. Circular dichroism spectroscopy, Fourier-transform infrared spectroscopy and nuclear magnetic resonance (NMR) were used to determine of the solution structure of both linear and cyclic peptides. The results indicated that the cyclopeptides containing the core of the epitope (DPVG) as a part of the cycle have more stable beta-turn structure than the linear peptides or the cyclic analogues, where the core motif is not a part of the cycle. NMR study of H-SALLc(EDPVGK)-NH(2) confirm presence of a type I beta-turn structure which includes the DPVG epitope core.     

Cyclic pentapeptides as models for reverse turns: determination of the equilibrium distribution between type I and type II conformations of Pro-Asn and Pro-Ala beta-turns

Cyclic pentapeptides are excellent models for reverse turns and have been used extensively in our laboratory to explore the influence of different amino acid sequences on turn preference. This paper is divided into two parts: In the first, we review our previous studies of cyclic pentapeptides. We summarize work that demonstrates the range of conformations possible within the cyclic pentapeptide backbone, the importance of sequence chirality in determining the backbone fold, and the utility of these cyclic pentapeptides as models for various turns. In the second, we present new results on two cyclic pentapeptides that contain beta-turns with Pro-Ala or Pro-Asn sequences in the i + 1 and i + 2 positions. By stereochemical criteria, a type I beta-turn is expected to be preferred by such L-L sequences. On the other hand, in proteins Asn occurs frequently in the i + 2 position of type II turns. We asked whether the same propensity would be manifest in an isolated model peptide, and if so, what the interactions were that influenced the relative stability of the type I and type II turns. To address these questions we have compared the conformational behavior of two peptides: cyclo(Gly-Pro-Ala-D-Phe-Pro) and cyclo(D-Ala-Pro-Asn-Gly-Pro). From previous studies, we anticipated that both peptides would contain an inverse gamma-turn and a beta-turn which consisted of either Gly-Pro-Ala-D-Phe or D-Ala-Pro-Asn-Gly in positions i to i + 3, respectively. Nuclear magnetic resonance analysis confirms this overall backbone conformation. Furthermore, quantitative nuclear Overhauser effect measurements in combination with molecular dynamics simulations and torsionally-forced energy minimizations have enabled us to determine that both type I and type II beta-turns are present in equilibrium in these peptides. The introduction of Asn in position i + 2 shifts this equilibrium significantly towards type II. We have done preliminary assessment of the possible side-chain/backbone conformations that contribute to the shift in populations.     

Solid state and solution conformation of Boc-L-Met-Aib-L-Phe-OMe. Beta-turn conformation of a sequence related to an active chemotactic peptide analog

The conformation of the peptide Boc-L-Met-Aib-L-Phe-OMe has been studied in the solid state and solution by X-ray diffraction and 1H n.m.r., respectively. The peptide differs only in the N-terminal protecting group from the biologically active chemotactic peptide analog formyl-L-Met-Aib-L-Phe-OMe. The molecules adopt a type-II beta-turn in the solid state with Met and Aib as the corner residues (phi Met = -51.8 degrees, psi Met = 139.5 degrees, phi Aib = 58.1 degrees, psi Aib = 37.0 degrees). A single, weak 4----1 intramolecular hydrogen bond is observed between the Boc CO and Phe NH groups (N---O 3.25 A, N-H---O 128.4 degrees). 1H n.m.r. studies, using solvent and temperature dependencies of NH chemical shifts and paramagnetic radical induced line broadening of NH resonances, suggest that the Phe NH is solvent shielded in CDCl3 and (CD3)2SO. Nuclear Overhauser effects observed between Met C alpha H and Aib NH protons provide evidence of the occurrence of Met-Aib type-II beta-turns in these solvents.     

Conformationally constrained analogs of protein kinase inhibitor (6-22)amide: effect of turn structures in the center of the peptide on inhibition of cAMP-dependent protein kinase.

The high-affinity interaction between protein kinase inhibitor (PKI)(6-22)amide(Thr6-Tyr-Ala-Asp-Phe-Ile-Ala-Ser-Gly-Arg-Thr-Gly- Arg-Arg-Asn- Ala-Ile22-NH2) and the catalytic subunit of cAMP-dependent protein kinase requires both the N-terminal Thr6 to Ile11 sequence of the inhibitor peptide and its C-terminal pseudosubstrate site comprised of Arg15 to Ile22. Small angle X-ray scattering data indicate that PKI(6-22)amide has a compact, rather than extended, structure in solution (Reed J et al., 1989, Biochem J 264:371-380). CD spectroscopic analysis of the PKI peptide led to the suggestion that a beta-turn structure might be located in the -Ala12-Ser-Gly-Arg15-connecting sequence in the middle of the molecule (Reed J, Kinzel V, Cheng HC, Walsh DA, 1987, Biochemistry 26:7641-7647). To investigate this possibility further, conformationally constrained and flexible analogs of PKI(6-22)amide were synthesized and used to study the structure-function relationships of this central portion of the inhibitor. (Des12-14)PKI(6-22) amide exhibited over a 200-fold loss in inhibitory activity. Replacement of the omitted -Ala12-Ser-Gly14-sequence with aminocaprylic acid yielded an analog that regained more than 90% of the lost binding energy. The D-alanine14 PKI analog was as potent as the parent peptide, whereas the beta-alanine14 and the sarcosine14 analogs were only 10-fold less active. Several peptides that promoted a beta-turn structure at residues 12-15 showed about 200-fold decreases in inhibitory activity. Two constrained analogs that could not assume a beta-turn conformation were only 30-fold less potent than PKI(6-22)amide. Thus, the structure of the central connecting portion of the PKI peptide, encompassing residues 12-15, greatly influences its ability to effectively bind to and inhibit the catalytic subunit. We conclude, however, that a formal beta-turn at this position is not required and is actually detrimental for a high-affinity interaction of PKI(6-22)amide with the enzyme. These results are interpreted in light of the Fourier-transform infrared spectra of the peptide analogs and the crystal structure of the peptide bound at the active site of the protein kinase (Knighton DR et al., 1991b, Science 253:414-420).     

Conformational and biochemical analysis of the cyclic peptides which modulate serine protease activity.

Prostate-specific antigen (PSA), a member of the kallikrein sub-group of the trypsin serine protease family, is a widely used marker for prostate cancer. Several sequences with specific binding to PSA have been identified by using phage display peptide libraries. The GST-fusion proteins of the characterized sequences have been shown to increase the enzyme activity of PSA to a synthetic substrate. The corresponding three cyclic synthetic analogues CVFTSNYAFC (A-1), CVFAHNYNYLVC (B-2) and CVAYCIEHHCWTC (C-4) have similar PSA promoting activity. Despite differences in the amino acid sequences, all three peptides bind to the same region of PSA. The conformation of the peptides was investigated by proton NMR spectroscopy. In addition, alanine replacement was used to characterize the prerequisites for binding. It is proposed that interactions with PSA are based on the aromatic and hydrophobic features of the amino acid side chains. Furthermore, it is suggested that peptides form beta-turn structures forced by cysteine bridges directing important aromatic side chains to the same side of the turn-structure.     

Favourable side-chain orientation of cleavage site dibasic residues of prohormone in proteolytic processing by prohormone convertase 1/3.

Previous studies using selectively modified pro-ocytocin/neurophysin substrate analogues and the purified metalloprotease, pro-ocytocin/neurophysin convertase (magnolysin; EC 3.4 24.62), have shown that dibasic cleavage site processing is associated with a prohormone sequence organized in a beta-turn structure. We have used various peptide analogues of the pro-ocytocin-neurophysin processing domain, and recombinant prohormone convertase 1/3, to test the validity of this property towards this member of the family of prohormone convertases (PCs). The enzymatic cleavage analysis and kinetics showed that: (a) with methyl amide (N-Met) modification, a secondary structure beta-turn breaker, the enzyme substrate interaction was abolished; (b) cleavage was favoured when the dibasic substrate side-chains were oriented in opposite directions; (c) the amino acid present at the P'1 position is important in the enzyme-substrate interaction; (d) the flexibility of the peptide substrate is necessary for the interaction; (e) Addition of dimethylsulfoxide to the cleavage assay favoured the cleavage of the pro-ocytocin/neurophysin large substrate over that of the smaller one pGlu-Arg-Thr-Lys-Arg-methyl coumarin amide. These data allowed us to conclude that proteolytic processing of pro-ocytocin-related peptide substrates by PC1/3 as well as by the metalloenzyme, magnolysin, involves selective recognition of precise cleavage site local secondary structure by the processing enzyme. It is hypothesized that this may represent a general property of peptide precursor proteolytic processing systems.     

Structural recognition of an ICAM-1 peptide by its receptor on the surface of T cells: conformational studies of cyclo (1, 12)-Pen-Pro-Arg-Gly-Gly-Ser-Val-Leu-Val-Thr-Gly-Cys-OH.

The purpose of this study is to elucidate the solution conformation of cyclic peptide 1 (cIBR), cyclo (1, 12)-Pen1-Pro2-Arg3-Gly4-Gly5-Ser6-Val7-Leu8-V al9-Thr10-Gly11-Cys12-OH, using NMR, circular dichroism (CD) and molecular dynamics (MD) simulation experiments. cIBR peptide (1), which is derived from the sequence of intercellular adhesion molecule-1 (ICAM-1, CD54), inhibits homotypic T-cell adhesion in vitro. The peptide hinders T-cell adhesion by inhibiting the leukocyte function-associated antigen-1 (LFA-1, CD11a/CD18) interaction with ICAM-1. Furthermore, Molt-3 T cells bind and internalize this peptide via cell surface receptors such as LFA-1. Peptide internalization by the LFA-1 receptor is one possible mechanism of inhibition of T-cell adhesion. The recognition of the peptide by LFA-1 is due to its sequence and conformation; therefore, this study can provide a better understanding for the conformational requirement of peptide-receptor interactions. The solution structure of 1 was determined using NMR, CD and MD simulation in aqueous solution. NMR showed a major and a minor conformer due to the presence of cis/trans isomerization at the X-Pro peptide bond. Because the contribution of the minor conformer is very small, this work is focused only on the major conformer. In solution, the major conformer shows a trans-configuration at the Pen1-Pro2 peptide bond as determined by HMQC NMR. The major conformer shows possible beta-turns at Pro2-Arg3-Gly4-Gly5, Gly5-Ser6-Val7-Leu8, and Val9-Thr10-Gly11-Cys12. The first beta-turn is supported by the ROE connectivities between the NH of Gly4 and the NH of Gly5. The connectivities between the NH of Ser6 and the NH of Val7, followed by the interaction between the amide protons of Val7 and Leu8, support the presence of the second beta-turn. Furthermore, the presence of a beta-turn at Val9-Thr10-Gly11-Cys12 is supported by the NH-NH connectivities between Thr10 and Gly11 and between Gly11 and Cys12. The propensity to form a type I beta-turn structure is also supported by CD spectral analysis. The cIBR peptide (1) shows structural similarity at residues Pro2 to Val7 with the same sequence in the X-ray structure of D1-domain of ICAM-1. The conformation of Pro2 to Val7 in this peptide may be important for its binding selectivity to the LFA-1 receptor.     

Conformation-activity relationship of peptide T and new pseudocyclic hexapeptide analogs.

Peptide T (ASTTTNYT), a segment corresponding to residues 185-192 of gp120, the coat protein of HIV, has several important biological properties in vitro that have stimulated the search for simpler and possibly more active analogs. We have previously shown that pseudocyclic hexapeptide analogs containing the central residues of peptide T retain considerable chemotactic activity. We have now extended the design of this type of analogs to peptides containing different aromatic residues and/or Ser in lieu of Thr. The complex conformation-activity relationship of these analogs called for a reexamination of the basic conformational tendencies of peptide T itself. Here, we present an exhaustive NMR conformational study of peptide T in different media. Peptide T assumes a gamma-turn in aqueous mixtures of ethylene glycol, a type-IV beta-turn conformation in aqueous mixtures of DMF, and a type-II beta-turn conformation in aqueous mixtures of DMSO. The preferred conformations for the analogs were derived from modeling, starting from the preferred conformations of peptide T. The best models derived from the gamma-turn conformation of peptide T are those of peptides XII (DSNYSR), XIII (ETNYTK) and XVI (ESNYSR). The best models derived from the type-IV beta-turn conformation of peptide T are those of peptides XIV (KTTNYE) and XV (DSSNYR). No low-energy models could be derived starting from the type-II beta-turn conformation of peptide T. The analogs with the most favored conformations are also the most active in the chemotactic test.     

Synthetic protein design: construction of a four-stranded beta-sheet structure and evaluation of its integrity in methanol-water systems.

The characterization of a four-stranded beta-sheet structure in a designed 26-residue peptide Beta-4 is described. The sequence of Beta-4 (Arg-Gly-Thr-Ile-Lys-(D)pro-Gly-Ile-Thr-Phe-Ala-(D)Pro-Ala-Thr-Val-Leu-P he-Ala-Val-(D)Pro-Gly-Lys-Thr-Leu-Tyr-Arg) was chosen such that three strategically positioned (D)Pro-Xxx segments nucleate type II' beta-turns, which facilitate hairpin extension. A four-stranded beta-sheet structure is determined in methanol from 500 MHz 1H NMR data using a total of 100 observed NOEs, 11 dihedral restraints obtained from vicinal JCalphaH-NH values and 10 hydrogen bonding constraints obtained from H/D exchange data. The observed NOEs provide strong evidence for a stable four-stranded sheet and a nonpolar cluster involving Ile8, Phe10, Val15 and Phe17. Circular dichroism studies in water-methanol mixtures provide evidence for melting of the beta-sheet structure at high water concentrations. NMR analysis establishes that the four-stranded sheet in Beta-4 is appreciably populated in 50% (v/v) aqueous methanol. In water, the peptide structure is disorganized, although the three beta-turn nuclei appear to be maintained.     

Mimicry of beta II'-turns of proteins in cyclic pentapeptides with one and without D-amino acids.

The solution structure of eight cyclic pentapeptides has been determined by two-dimensional 1H-NMR spectroscopy combined with spectra simulations and restrained molecular dynamic simulations. Six of the cyclic pentapeptides were derived from the C-terminal cholecystokinin fragment CCK-4 enlarged with Asp1 resulting in the sequence (Asp-Trp-Met-Asp-Phe), one L-amino acid after the other was substituted by its D-analog. In addition, two peptides, including an all-L-amino-acid-containing cyclic pentapeptide, cyclo(Asp-Phe-Lys-Ala-Thr) and cyclo(Asp-Phe-Lys-Ala-D-Thr) were investigated. All D-amino-acid-containing peptides show beta II'-turn conformations with the D-amino acid in the i + 1 position, excepting the D-aspartic-acid-containing peptides. These two peptides are characterized by the lack of beta-turns at pH values less than 4, suggesting that D-aspartic acid in the full-protonized state avoids the formation of beta-turns in these compounds. At pH values greater than 5, a conformational change into the beta II'-turn conformation was also observed for these peptides. Conformations without beta-turns are expected for cyclic all-L pentapeptides, but both cyclo(Asp-Phe-Lys-Ala-Thr) and the D-Thr analog cyclo(Asp-Phe-Lys-Ala-D-Thr) exhibit beta II'-turn conformations around Thr-Asp and D-Thr-Asp. Thus cyclic all-L pentapeptides and those with one D-amino acid are able to form similar structures preferably with a beta II'-turn. The beta-turn formation in cyclic pentapeptides containing a D-aspartic acid is dependent on the ionization state. The relevance of the work to the design of beta'-turn mimetics is discussed.