Human erythrocyte glutathione reductase: chemical mechanism and structure of the transition state for hydride transfer

Kinetic parameters and primary deuterium kinetic isotope effects for NADH and five pyridine nucleotide substrates have been determined at pH 8.1 for human erythrocyte glutathione reductase. DV/KNADH and DV are equal to 1.4 and are pH independent below pH 8.1, but DV decreases to 1.0 at high pH as a group exhibiting a pK of 8.6 is deprotonated. This result suggests that as His-467' is deprotonated, the rate of the isotopically insensitive oxidative half-reaction is specifically decreased and becomes rate-limiting. For all substrates, equivalent V and V/K primary deuterium kinetic isotope effects are observed at pH values below 8.1. The primary deuterium kinetic isotope effect on V, but not V/K, is sensitive to solvent isotopic composition. The primary tritium kinetic isotope effects agree well with the corresponding value calculated from the primary deuterium kinetic isotope effects by using the Swain-Schaad relationship. This suggests that the primary deuterium kinetic isotope effects observed in these steady-state experiments are the intrinsic primary deuterium kinetic isotope effects for hydride transfer. The magnitude of the primary deuterium kinetic isotope effect is dependent on the redox potential of the pyridine nucleotide substrate used, varying from approximately 1.4 for NADH and -320 mV reductants to 2.7 for thioNADH to 4.2-4.8 for 3-acetylpyridine adenine dinucleotide (3APADH). The alpha-secondary tritium kinetic isotope effects also increase as the redox potential of the pyridine nucleotide substrate becomes more positive. Together, these data indicate that the transition state for hydride transfer is very early for NADH and becomes later for thioNADH and 3APADH, as predicted by Hammond's postulate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Alpha-secondary tritium kinetic isotope effects indicate hydrogen tunneling and coupled motion occur in the oxidation of L-malate by NAD-malic enzyme

The NAD-malic enzyme from Ascaris suum catalyzes the divalent metal ion-dependent oxidative decarboxylation of L-malate to give pyruvate and CO2, with NAD+ as the oxidant. Alpha-secondary tritium kinetic isotope effects were measured with NAD+ or APAD+ and L-malate-2-H(D) and several different divalent metal ions. The alpha-secondary tritium kinetic isotope effects are slightly higher than 1 with NAD+ and L-malate as substrates, much larger than the expected inverse isotope effect for a hybridization change from sp2 to sp3. The alpha-secondary tritium kinetic isotope effects are reduced to values near 1 with L-malate-2-D as the substrate, regardless of the metal ion that is used. Data suggest the presence of quantum mechanical tunneling and coupled motion in the malic enzyme reaction when NAD+ and malate are used as substrates. Isotope effects were also measured using the D/T method with NAD+ and Mn2+ as the substrate pair. A Swain-Schaad exponent of 2.2 (less than the value of 3.26 expected for strictly semiclassical behavior) is estimated, suggesting the presence of other slow steps along the reaction pathway. With APAD+ and Mn2+ as the substrate pair, inverse alpha-secondary tritium kinetic isotope effects are observed, and a Swain-Schaad exponent of 3.3 is estimated, consistent with rate-limiting hydride transfer and no quantum mechanical tunneling or coupled motion. Data are discussed in terms of the malic enzyme mechanism and the theory developed by Huskey for D/T isotope effects as an indicator of tunneling [Huskey, W. P. (1991) J. Phys. Org. Chem. 4, 361-366].     

Detailed dissection of a new mechanism for glycoside cleavage: alpha-1,4-glucan lyase

The unusual enzyme, Gracilariopsis alpha-1,4-glucan lyase of the sequence-related glycoside hydrolase family 31, cleaves the glycosidic bond of alpha-1,4-glucans via a beta-elimination reaction involving a covalent glycosyl-enzyme intermediate (Lee, S. S., Yu, S., and Withers, S. G. (2002) J. Am. Chem. Soc. 124, 4948-4949). The classical bell-shaped pH dependence of k(cat)/K(m) indicates two ionizable groups in the active site with apparent pK(a) values of 3.05 and 6.66. Br?nsted relationships of log k(cat) versus pK(a) and log(k(cat)/K(m)) versus pK(a) for a series of aryl glucosides both show a linear monotonic dependence on leaving group pK(a) with low beta(lg) values of 0.32 and 0.33, respectively. The combination of these low beta(lg) values with large secondary deuterium kinetic isotope effects (k(H)/k(D) = 1.16 - 1.19) on the first step indicate a glycosylation step with substantial glycosidic bond cleavage and proton donation to the leaving group oxygen at the transition state. Developed oxocarbenium ion character of the transition state is also suggested by the potent inhibition afforded by acarbose and 1-deoxynojirimycin (K(i) = 20 and 130 nM, respectively) and by the substantial rate reduction afforded by adjacent fluorine substitution. For only one substrate, 5-fluoro-alpha-D-glucopyranosyl fluoride, was the second elimination step shown to be rate-limiting. The large alpha-secondary deuterium kinetic isotope effect (k(H)/k(D) = 1.23) at C-1 and the small primary deuterium kinetic isotope effect (k(H)/k(D) = 1.92) at C-2 confirm an E2 mechanism with strong E1 character for this second step. This considerable structural and mechanistic similarity with retaining alpha-glucosidases is clear evidence for the evolution of an enzyme mechanism within the family.     

The mechanism of glycogen synthetase as determined by deuterium isotope effects and positional isotope exchange experiments

The reaction mechanism for glycogen synthetase from rabbit muscle was examined by alpha-secondary deuterium isotope effects and positional exchange experiments. Incubation of glycogen synthetase with [beta-18O2,alpha beta-18O]UDP-Glc did not result in any detectable positional isotope exchange from the beta-nonbridge position to the anomeric oxygen of the glucose moiety. Glucono-1,5-lactone was found to be a noncompetitive inhibitor versus UDP-Glc. The kinetic constants, K(is) and K(ii), were found to be 91 +/- 4 microM and 0.70 +/- 0.09 mM, respectively. Deoxynojirimycin was a nonlinear inhibitor at pH 7.5. The alpha-secondary deuterium isotope effects were measured with [1-2H]UDP-Glc by the direct comparison method. The isotope effects on Vmax and Vmax/K were found to be 1.23 +/- 0.04 and 1.09 +/- 0.06, respectively. The inhibitory effects by glucono-lactone and deoxynojirimycon plus the large alpha-secondary isotope effect on Vmax have been interpreted to show that an oxocarbonium ion is an intermediate in this reaction mechanism. The lack of a detectable positional isotope exchange reaction in the absence of glycogen suggests the formation of a rigid tight ion pair between UDP and the oxocarbonium ion intermediate.     

Transition state of the sulfuryl transfer reaction of estrogen sulfotransferase

Kinetic isotope effects have been measured for the estrogen sulfotransferase-catalyzed sulfuryl (SO3) transfer from p-nitrophenyl sulfate to the 5'-phosphoryl group of 3'-phosphoadenosine 5'-phosphate. 18(V/K)nonbridge = 1.0016 +/- 0.0005, 18(V/K)bridge = 1.0280 +/- 0.0006, and 15(V/K) = 1.0014 +/- 0.0004. (15(V/K) refers to the nitro group in p-nitrophenyl sulfate). The kinetic isotope effects indicate substantial S O bond fission in the transition state, with partial charge neutralization of the leaving group. The small kinetic isotope effect in the nonbridging sulfuryl oxygen atoms suggests no significant change in bond orders of these atoms occurs, consistent with modest nucleophilic involvement. A comparison of the data for enzymatic and uncatalyzed sulfuryl transfer reactions suggests that both proceed through very similar transition states.     

Permeable membrane/mass spectrometric measurement of solvent 1H/2H, 12C/13C, and 16O/18O kinetic isotope effects associated with alpha-chymotrypsin deacylation: evidence for reaction mechanism plasticity

We have measured, by permeable membrane/mass spectrometry, the 16O/18O, 12C/13C, and solvent H2O/D2O kinetic isotope effects (kie) associated with acyl-alpha-chymotrypsin hydrolysis and transesterification. The hydrolysis of alpha-chymotrypsinyl 2-furoate has a 12C/13C kie of approximately 1.06. Transesterification of the same acyl enzyme shows 16O/18O, 12C/13C, and solvent H2O/D2O kinetic isotope effects of 1.015 (0.003), 1.01-1.02, and 2.226 (0.007), respectively. From the temperature independence of the 16O/18O transesterification kinetic isotope effect and kinetic data reported elsewhere [Wang, C.-L. A., Calvo, K. C., & Klapper, M. H. (1981) Biochemistry 20, 1401-1408], we conclude that there are two active forms of acylchymotrypsin. We also propose that formation of the tetrahedral intermediate is the rate-limiting step in both hydrolysis and transesterification and that the position of the transition state in the transesterification is closer to the starting enzyme ester while that for the hydrolytic reaction is closer to the tetrahedral intermediate. These results are discussed in terms of reaction mechanism plasticity.     

The pH dependence of the kinetic parameters of ketol acid reductoisomerase indicates a proton shuttle mechanism for alkyl migration.

The enzyme ketol acid reductoisomerase catalyzes the second common reaction in the biosynthesis of the branched chain amino acids. The reaction is complex as an alkyl migration and a ketone reduction apparently occur as separate steps during the conversion of acetolactate to 2,3-dihydroxy-3-methylbutyrate. This paper reports on the pH dependence of the kinetic parameters of the enzyme. The pH variation of log(V/K) for acetolactate was fit to an equation describing a bell-shaped curve, indicating an acid and a base catalyst for the reaction. In the reverse direction, V/K for 2,3-dihydroxy-3-methylbutyrate is constant over the pH range 8 to 10 and decreases below pH 8 with the ionization of two catalytic groups. The pH dependence of the V/K values for reduction of the kinetically competent intermediate and analogs of this intermediate are also described by a bell-shaped curve. The pH dependence of the V/K for alkyl migration of this intermediate indicates a single base catalyst for this reaction. We observe no deuterium kinetic isotope effect on V or V/K for the reaction of acetolactate at any pH. We observe a pH-dependent kinetic isotope effect on V/K for the reduction of the intermediate, the magnitude of which is metal ion dependent. Larger KIE's are observed in the presence of Mn2+ as opposed to Mg2+. In the reverse reaction there is a pH-dependent kinetic isotope effect on V/K. Based on the pH dependence of the kinetic parameters and the kinetic isotope effects, we propose a base-catalyzed proton shuttle mechanism for the alkyl migration reaction followed by an acid-assisted ketone reduction by NADPH.     

The catalytic consequences of experimental evolution. Transition-state structure during catalysis by the evolved beta-galactosidases of Escherichia coli (ebg enzymes) changed by a single mutational event.

1. The first chemical step in the hydrolysis of galactosylpyridinium ions by the evolvant ebg enzyme is less sensitive to leaving-group acidity than in the case of the wild-type ebg enzyme, implying less glycone-aglycone-bond fission at the transition state. 2. The first chemical step in the hydrolysis of aryl galactosides by ebg enzyme is probably less sensitive to leaving-group acidity than in the case of ebg enzyme, possibly as a consequence of resulting in more effective proton donation to the leaving aglycone. 3. alpha-Deuterium kinetic isotope effects of 1.1(0) and beta-deuterium kinetic isotope effects of 1.0(0) were measured for the hydrolysis of galactosyl-enzyme intermediates derived from ebg and ebg enzymes: these effects are not compatible with reaction of the sugar ring through a 4C1-like conformation, or with an ionic glycosyl-enzyme intermediate. 4. The variation with pH of steady-state kinetic parameters for hydrolysis of p-nitrophenyl galactoside by ebg and ebg enzymes and of 3-methylphenyl beta-galactoside, 3,4-dinitrophenyl beta-galactoside and beta-galactosyl-3-bromopyridinium ion by ebg enzyme was measured. The steep, non-classical, fall in activity against p-nitrophenyl galactoside at low pH observed with ebg and ebg enzymes is not observed with ebg enzymes.     

Mechanistic studies of protein tyrosine phosphatases YopH and Cdc25A with m-nitrobenzyl phosphate

Protein tyrosine phosphatases (PTPs) constitute a large family of signaling enzymes that include both tyrosine specific and dual-specificity phosphatases that hydrolyze pSer/Thr in addition to pTyr. Previous mechanistic studies of PTPs have relied on the highly activated substrate p-nitrophenyl phosphate (pNPP), an aryl phosphate with a leaving group pK(a) of 7. In the study presented here, we employ m-nitrobenzyl phosphate (mNBP), an alkyl phosphate with a leaving group pK(a) of 14.9, which mimics the physiological substrates of the PTPs. We have carried out pH dependence and kinetic isotope effect measurements to characterize the mechanism of two important members of the PTP superfamily: Yersinia PTP (YopH) and Cdc25A. Both YopH and Cdc25A exhibit bell-shaped pH-rate profiles for the hydrolysis of mNBP, consistent with general acid catalysis. The slightly inverse (18)(V/K)(nonbridge) isotope effects (0.9999 for YopH and 0.9983 for Cdc25A) indicate a loose transition state with little nucleophilic participation for both enzymes. The smaller (18)(V/K)(bridge) primary isotope effects (0.9995 for YopH and 1.0012 for Cdc25A) relative to the corresponding isotope effects for pNPP hydrolysis suggest that protonation of the leaving group oxygen at the transition state by the general acid is ahead of P-O bond fission with the alkyl substrate, while general acid catalysis of pNPP by YopH is more synchronous with P-O bond fission. The isotope effect data also confirm findings from previous studies that Cdc25A utilizes general acid catalysis for substrates with a leaving group pK(a) of >8, but not for pNPP. Interestingly, the difference in the kinetic isotope effects for the reactions of aryl phosphate pNPP and alkyl phosphate mNBP by the PTPs parallels what is observed in the uncatalyzed reactions of their monoanions. In these reactions, the leaving group is protonated in the transition state, as is the case in PTP-catalyzed reactions. Also, the phosphoryl group in the transition states of the enzymatic reactions does not differ substantially from those of the uncatalyzed reactions. These results provide further evidence that these enzymes do not change the transition state but simply stabilize it.     

Determination of the chlorine kinetic isotope effect on the 4-chlorobenzoyl-CoA dehalogenase-catalyzed nucleophilic aromatic substitution

The chlorine kinetic isotope effect (KIE) on the dehalogenation of 4-chlorobenzoyl-CoA catalyzed by 4-chlorobenzoyl-CoA dehalogenase has been measured at room temperature and optimal pH. The measured value of (37)k = 1.0090 +/- 0.0006 is larger than the KIEs recently measured for haloalkane and fluoroacetate dehalogenase. This indicates that the transition state for dissociation of chloride ion from the Meisenheimer intermediate is sensitive to the chlorine isotopic substitution. Simple modeling suggests that this sensitivity originates in the high isotopic sensitivity of the C-Cl bond bending modes.     

A kinetic isotope effect study and transition state analysis of the S-adenosylmethionine synthetase reaction

The biosynthesis of S-adenosylmethionine occurs in a unique enzymatic reaction in which the synthesis of the sulfonium center results from displacement of the entire polyphosphate chain from MgATP. The mechanism of S-adenosylmethionine synthetase (ATP:L-methionine s-adenosyltransferase) from Escherichia coli has been characterized by kinetic isotope effect and substrate trapping measurements. Replacement of 12C by 14C at the 5' carbon of ATP yields a primary Vmax/Km isotope effect (12C/14C) of 1.128 +/- 0.003 in the absence of added monovalent cation activator (K+). At saturating K+ concentrations (10 mM) the primary isotope effect diminishes slightly to 1.108 +/- 0.003, indicating that the step in the mechanism involving bond breaking at the 5' carbon of MgATP has a small commitment to catalysis at conditions near Vmax. No alpha-secondary 3H isotope effect from [5'-3H]ATP was detected, (1H/3H) = 1.000 +/- 0.002, even in the absence of KCl. There was no significant primary sulfur isotope effect from [35S]methionine at KCl concentrations from 0 to 10 mM. Substitution of the methyl group of methionine with tritium yielded a beta-secondary isotope effect (CH3/C3H3) = 1.009 +/- 0.008 independent of KCl concentration. The reaction of selenomethionine and [5'-14C]ATP gave a primary isotope effect of 1.097 +/- 0.006, independent of KCl concentration. Substrate trapping experiments demonstrated that the step in the mechanism involving bond making to sulfur of methionine does not have a significant commitment to catalysis at 0.25 mM KCl, therefore intrinsic isotope effects were observed. Substrate trapping experiments indicated that the step involving bond breaking at carbon 5' of MgATP has a 10% commitment to catalysis at 0.25 mM KCl. The isotope effects are interpreted in terms of an Sn2-like transition state structure in which bonding of the C5' is symmetric with respect to the departing tripolyphosphate group and the incoming sulfur of methionine. With selenomethionine as substrate an earlier transition state is implicated.     

Nonlinear free energy relationship in the general-acid-catalyzed acylation of rat kidney gamma-glutamyl transpeptidase by a series of gamma-glutamyl anilide substrate analogues

The gamma-glutamyl transpeptidase (GGT) purified from rat kidney reacts with a series of eight parasubstituted L-glutamyl gamma-anilides, in the presence of Gly-Gly, catalyzing the formation of gamma-Glu-Gly-Gly (pH 8.0, 37 degrees C). The transpeptidation reaction was followed through the discontinuous colorimetric determination of the concentration of released parasubstituted aniline. Steady-state kinetic studies were performed to measure k(cat) and K(M) values for each anilide substrate. A Hammett plot constructed by the correlation of log(k(cat)) and the sigma(-) parameter for each anilide substrate displays statistically significant upward curvature, consistent with a general-acid-catalyzed acylation mechanism in which the geometry of the transition state changes with the nature of the para substituent. Kinetic isotope effects were measured and are consistent with a reaction involving a proton in flight at the rate-limiting transition state. The pH-rate profiles measured over pH 7.0-9.5 are bell-shaped with kinetic pK(a) values that may be attributed to the active site nucleophile (or its general-base catalytic partner) and the active-site general acid. The variation of the latter pK(a) value as a function of temperature is consistent with an enthalpy of ionization expected for an ammonium ion acting as a general acid. Examination of the variation of k(cat) as a function of temperature gave values for the enthalpy and entropy of activation that are similar to those determined for the general-acid-catalyzed breakdown of the tetrahedral intermediate formed during acylation of chymotrypsin by similar amide substrates.     

Use of isotope effects to elucidate enzyme mechanisms

The chemical bond breaking steps are normally not rate limiting for enzymatic reactions. However, comparison of deuterium and tritium isotope effects on the same reaction, especially when coupled with 13C isotope effects for the same step measured with deuterated as well as unlabeled substrates, allows calculation of the intrinsic isotope effects on the bond breaking steps and thus a determination of the commitments to catalysis for the reactants. The variation in observed isotope effects as a function of reactant concentration can be used to determine kinetic mechanisms, while the pH variation of isotope effects can determine the stickiness of the reactants and which portions of the reactant mechanism are pH dependent. Finally the size of primary and secondary intrinsic isotope effects can be used to determine transition state structure.     

Transition state analysis and requirement of Asp-262 general acid/base catalyst for full activation of dual-specificity phosphatase MKP3 by extracellular regulated kinase

Dual-specificity phosphatase MKP3 down-regulates mitogenic signaling through dephosphorylation of extracellular regulated kinase (ERK). Unlike a simple substrate-enzyme interaction, the noncatalytic, amino-terminal domain of MKP3 can bind efficiently to ERK, leading to activation of the phosphatase catalytic domain by as much as 100-fold toward exogenous substrates. It has been suggested that ERK activates MKP3 through the stabilization of the active phosphatase conformation, enabling general acid catalysis. Here, we investigated whether Asp-262 of MKP3 is the bona fide general acid and evaluated its contribution to the catalytic steps activated by ERK. Using site-directed mutagenesis, pH rate and Br?nsted analyses, kinetic isotope effects, and steady-state and rapid reaction kinetics, Asp-262 was identified as the authentic general acid catalyst, donating a proton to the leaving group oxygen during P-O bond cleavage. Kinetic isotope effects [(18)(V/K)(bridge), (18)(V/K)(nonbridge), and (15)(V/K)] were evaluated for the effect of ERK and of the D262N mutation on the transition state of the phosphoryl transfer reaction. The patterns of the three isotope effects for the reaction with native MKP3 in the presence of ERK are indicative of a reaction where the leaving group is protonated in the transition state, whereas in the D262N mutant, the leaving group departs as the anion. Even without general acid catalysis, the D262N mutant reaction is activated by ERK through increased phosphate affinity ( approximately 8-fold) and the partial stabilization of the transition state for phospho-enzyme intermediate formation ( approximately 4-fold). Based on these analyses, we estimate that dephosphorylation of phosphorylated ERK by the D262N mutant is >1000-fold lower than by native, activated MKP3. Also, the kinetic results suggest that Asp-262 functions as a general base during thiol-phosphate intermediate hydrolysis.     

Mechanism of Agrobacterium beta-glucosidase: kinetic studies.

The beta-glucosidase from Agrobacterium faecalis (previously Alcaligenes faecalis) has been subjected to a detailed kinetic investigation with a range of substrates to probe its specificity and mechanism. It has a relatively broad specificity for the substrate sugar moiety and exhibits a classical pH dependence for its kinetic parameters with three different substrates and an identical pH dependence for its inactivation by a mechanism-based inactivator, cyclophellitol. Measurement of kcat and Km values for a series of aryl glucoside substrates has allowed construction of a Bronsted plot, the concave-downward shape of which is consistent with the anticipated two-step mechanism involving a glucosyl-enzyme intermediate which is formed and hydrolyzed via oxocarbonium ion-like transition states. The slope of the leaving group-dependent portion of the Bronsted plot (beta 1g = -0.7) indicates a large degree of bond cleavage at the transition state. Secondary deuterium kinetic isotope effects measured for five different aryl glucosides are also consistent with this mechanism and further suggest that the transition state for formation of the glucosyl-enzyme intermediate, probed with the slower substrates for which kH/kD = 1.06, is more SN2-like than that for its hydrolysis (for which kH/kD = 1.11). Reasons for this difference are proposed, and values of Ki for several ground-state and transition-state analogue inhibitors are presented which support the concept of sp2-hybridized transition states.     

Binding isotope effects: boon and bane

Kinetic isotope effects are increasingly applied to investigate enzyme reactions and have been used to understand transition state structure, reaction mechanisms, quantum mechanical hydride ion tunneling and to design transition state analogue inhibitors. Binding isotope effects are an inherent part of most isotope effect measurements but are usually assumed to be negligible. More detailed studies have established surprisingly large binding isotope effects with lactate dehydrogenase, hexokinase, thymidine phosphorylase, and purine nucleoside phosphorylase. Binding reactants into catalytic sites immobilizes conformationally flexible groups, polarizes bonds, and distorts bond angle geometry, all of which generate binding isotope effects. Binding isotope effects are easily measured and provide high-resolution and detailed information on the atomic changes resulting from ligand-macromolecular interactions. Although binding isotope effects complicate kinetic isotope effect analysis, they also provide a powerful tool for finding atomic distortion in molecular interactions.     

The use of isotope effects to determine enzyme mechanisms

Isotope effects are one of the most powerful kinetic tools for determining enzyme mechanisms. There are three methods of measurement. First, one can compare reciprocal plots with labeled and unlabeled substrates. The ratio of the slopes is the isotope effect on V/K, and the ratio of the vertical intercepts is the isotope effect on V(max). This is the only way to determine V(max) isotope effects, but is limited to isotope effects of 5% or greater. The second method is internal competition, where the labeled and unlabeled substrates are present at the same time and the change in their ratio in residual substrate or in product is used to calculate an isotope effect, which is that on V/K of the labeled reactant. This is the method used for tritium or (14)C, or with the natural abundances of (13)C, (15)N, or (18)O. The third method involves perturbations from equilibrium when a labeled substrate and corresponding unlabeled product are present at chemical equilibrium. This also gives just an isotope effect on V/K for the labeled reactant. The chemistry is typically not fully rate limiting, so that the isotope effect on V/K is given by: (x)(V/K)=((x)k+c(f)+c(r)(x)K(eq))/(1+c(f)+c(r)) where x defines the isotope (D, T, 13, 15, 18 for deuterium, tritium, (13)C, (15)N, or (18)O), and (x)(V/K), (x)k, and (x)K(eq) are the observed isotope effect, the intrinsic one on the chemical step, and the isotope effect on the equilibrium constant, respectively. The constants c(f) and c(r) are commitments in forward and reverse directions, and are the ratio of the rate constant for the chemical reaction and the net rate constant for release from the enzyme of the varied substrate (direct comparison) or labeled substrate (internal competition and equilibrium perturbation) for c(f), or the first product released or the one involved in the perturbation for c(r). The intrinsic isotope effect, (x)k, can be estimated by comparing deuterium and tritium isotope effects on V/K, or by comparing the deuterium isotope effect with (13)C ones with deuterated and undeuterated substrates. Adding a secondary deuterium isotope effect and its effect on the (13)C one can give an exact solution for all intrinsic isotope effects and commitments. The effect of deuteration on a (13)C isotope effect allows one to tell if the two isotope effects are on the same or different steps. Applications of these methods to several enzyme systems will be presented.     

Kinetic and chemical mechanisms of the fabG-encoded Streptococcus pneumoniae beta-ketoacyl-ACP reductase

Beta-ketoacyl-acyl carrier protein reductase (KACPR) catalyzes the NADPH-dependent reduction of beta-ketoacyl-acyl carrier protein (AcAc-ACP) to generate (3S)-beta-hydroxyacyl-ACP during the chain-elongation reaction of bacterial fatty acid biosynthesis. We report the evaluation of the kinetic and chemical mechanisms of KACPR using acetoacetyl-CoA (AcAc-CoA) as a substrate. Initial velocity, product inhibition, and deuterium kinetic isotope effect studies were consistent with a random bi-bi rapid-equilibrium kinetic mechanism of KACPR with formation of an enzyme-NADP(+)-AcAc-CoA dead-end complex. Plots of log V/K(NADPH) and log V/K(AcAc)(-)(CoA) indicated the presence of a single basic group (pK = 5.0-5.8) and a single acidic group (pK = 8.0-8.8) involved in catalysis, while the plot of log V vs pH indicated that at high pH an unprotonated form of the ternary enzyme complex was able to undergo catalysis. Significant and identical primary deuterium kinetic isotope effects were observed for V (2.6 +/- 0.4), V/K(NADPH) (2.6 +/- 0.1), and V/K(AcAc)(-)(CoA) (2.6 +/- 0.1) at pH 7.6, but all three values attenuated to values of near unity (1.1 +/- 0.03 or 0.91 +/- 0.02) at pH 10. Similarly, the large alpha-secondary deuterium kinetic isotope effect of 1.15 +/- 0.02 observed for [4R-(2)H]NADPH on V/K(AcAc)(-)(CoA) at pH 7.6 was reduced to a value of unity (1.00 +/- 0.04) at high pH. The complete analysis of the pH profiles and the solvent, primary, secondary, and multiple deuterium isotope effects were most consistent with a chemical mechanism of KACPR that is stepwise, wherein the hydride-transfer step is followed by protonation of the enolate intermediate. Estimations of the intrinsic primary and secondary deuterium isotope effects ((D)k = 2.7, (alpha)(-D)k = 1.16) and the correspondingly negligible commitment factors suggest a nearly full expression of the intrinsic isotope effects on (D)V/K and (alpha)(-D)V/K, and are consistent with a late transition state for the hydride transfer step. Conversely, the estimated intrinsic solvent effect ((D)2(O)k) of 5.3 was poorly expressed in the experimentally derived parameters (D)2(O)V/K and (D)2(O)V (both = 1.2 +/- 0.1), in agreement with the estimation that the catalytic commitment factor for proton transfer to the enolate intermediate is large. Such detailed knowledge of the chemical mechanism of KAPCR may now help guide the rational design of, or inform screening assay-design strategies for, potent inhibitors of this and related enzymes of the short chain dehydrogenase enzyme class.     

Mechanism of proton transfer in the 3alpha-hydroxysteroid dehydrogenase/carbonyl reductase from Comamonas testosteroni

3alpha-hydroxysteroid dehydrogenase/carbonyl reductase from Comamonas testosteroni catalyzes the oxidation of androsterone with NAD(+) to form androstanedione and NADH with a concomitant releasing of protons to bulk solvent. To probe the proton transfer during the enzyme reaction, we used mutagenesis, chemical rescue, and kinetic isotope effects to investigate the release of protons. The kinetic isotope effects of (D)V and (D(2)O)V for wild-type enzyme are 1 and 2.1 at pL 10.4 (where L represents H, (2)H), respectively, and suggest a rate-limiting step in the intramolecular proton transfer. Substitution of alanine for Lys(159) changes the rate-limiting step to the hydride transfer, evidenced by an equal deuterium isotope effect of 1.8 on V(max) and V/K(androsterone) and no solvent kinetic isotope effect at saturating 3-(cyclohexylamino)propanesulfonic acid (CAPS). However, a value of 4.4 on V(max) is observed at 10 mm CAPS at pL 10.4, indicating a rate-limiting proton transfer. The rate of the proton transfer is blocked in the K159A and K159M mutants but can be rescued using exogenous proton acceptors, such as buffers, small primary amines, and azide. The Br?nsted relationship between the log(V/K(d)(-base)Et) of the external amine (corrected for molecular size effects) and pK(a) is linear for the K159A mutant-catalyzed reaction at pH 10.4 (beta = 0.85 +/- 0.09) at 5 mm CAPS. These results show that proton transfer to the external base with a late transition state occurred in a rate-limiting step. Furthermore, a proton inventory on V/Et is bowl-shaped for both the wild-type and K159A mutant enzymes and indicates a two-proton transfer in the transition state from Tyr(155) to Lys(159) via 2'-OH of ribose.     

Use of multiple isotope effects to study the mechanism of 6-phosphogluconate dehydrogenase

The multiple isotope effect method of Hermes et al. [Hermes, J. D., Roeske, C. A., O'Leary, M. H., & Cleland, W. W. (1982) Biochemistry 21, 5106-5114] has been used to study the mechanism of the oxidative decarboxylation catalyzed by 6-phosphogluconate dehydrogenase from yeast. 13C kinetic isotope effects of 1.0096 and 1.0081 with unlabeled or 3-deuterated 6-phosphogluconate, plus a 13C equilibrium isotope effect of 0.996 and a deuterium isotope effect on V/K of 1.54, show that the chemical reaction after the substrates have bound is stepwise, with hydride transfer preceding decarboxylation. The kinetic mechanism of substrate addition is random at pH 8, since the deuterium isotope effect is the same when either NADP or 6-phosphogluconate or 6-phosphogluconate-3-d is varied at fixed saturating levels of the other substrate. Deuterium isotope effects on V and V/K decrease toward unity at high pH at the same time that V and V/K are decreasing, suggesting that proton removal from the 3-hydroxyl may precede dehydrogenation. Comparison of the tritium effect of 2.05 with the other measured isotope effects gives limits of 3-4 on the intrinsic deuterium and of 1.01-1.05 for the intrinsic 13C isotope effect for C-C bond breakage in the forward direction and suggests that reverse hydride transfer is 1-4 times faster than decarboxylation.