Photocatalyzed isomerization of 1-pentene by Ru3(CO)12 adsorbed onto porous Vycor glass

UV photolysis of Ru₃(CO)₁₂ physisorbed onto porous Vycor glass leads to the oxidative addition product (μ-H)Ru₃(CO)₁₀(μ-OSi). The latter reacts thermally with 1-pentene to form a stable adduct, HRu₃(CO)₁₀(OSi)(1-C₅H₁₀), and photolysis of the adduct results in isomerization of the alkene. HRu₃(CO)₁₀(OSi)(1-C₅H₁₀) + hv → (μ-H)Ru₃(CO)₁₀(μ-OSi) + 2-pentene As with other photoactivated hybrid systems, the cis-/trans-2-pentene product ratio changes during photolysis. Unlike the other systems, where light generates a thermal catalyst, the data gathered here indicate a photoassisted catalytic process in which photoactivation of HRu₃(CO)₁₀(OSi)(1-C₅H₁₀) leads to an excited state similar to a π-allyl complex.     

Chemistry of vinylidene complexes XI. Synthesis of trinuclear MnFePt complexes by means of consecutive assembling out of mono- and dimetal vinylidene precursors

The dimetal μ-vinylidene complexes Cp(CO)₂MnPt(μ-C = CHPh)L₂ (L = tert.-phosphine or -phosphite), which have been obtained by coupling of the mononuclear complex Cp(CO)₂Mn=C=CHPh and unsaturated PtL₂ unit, add smoothly the Fe(CO)₄ moiety to produce trimetal MnFePt compounds. The μ₃-vinylidene cluster CpMnFePt(μ₃-C=CHPh)(CO)₆(PPh₃) was prepared in quantitative yields from the reactions of Cp(CO)₂MnPt(μ-C=CHPh)(PPh₃)L (L = PPh₃ or CO) with Fe₂(CO)₉ in benzene at 20 °C. The phosphite-substituted complexes Cp(CO)₂Mnpt(μ-C=CHPh)L₂ (L = P(OEt)₃ or P(OPrⁱ)₃) react under analogous conditions with Fe₂(CO)₉ to give mixtures (2:3) of the penta- and hexacarbonyl clusters, CpMnFePt(μ₃-C = CHPh)(CO)₅L₂ and CpMnFePt(μ₃-C = CHPh)(CO)₆L, respectively. The similar reaction of the dimetal complex Cp(CO)₂MnPt(μ-C = CHPh)(dppm), in which the Pt atom is chelated by dppm = Ph₂PCH₂PPhPin2 ligand, gives only a 15% yield of the analogous trimetal μ₃-vinylidene hexacarbonyl product CpMnFePt(μ₃-C = CHPh)(CO)(dppm), but the major product (40%) is the tetranuclear μ₄-vinylidene cluster (dppm)PtFe₃(μ₄-C = CHPh)(CO)₉. The IR and ¹H, ¹³C and ³¹P NMR data for the new complexes are reported and discussed.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

The preparation, characterisation and low temperature X-ray structure of Ru6(η-μ4-CO)2(CO)13(η6-C6Me6)

The new organometallic cluster (η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆Me₆) has been prepared by the thermolysis of Ru₃(CO)₁₂ with hexamethylbenzene in octane and characterised by a single crystal X-ray diffraction study. It is isostructural with the known cluster Ru₆(η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆H₃Me₃) and the metal core constitutnts the same tetrahedral Ru₄ unit with two edge-bridging Ru atoms. The mesitylene derivative has been shown to undergo rearrangement to afford the octahedral carbido cluster Ru₆C(CO)₁₄(η⁶-C₆H₃Me₃), but this conversion is not observed for the new hexamethylbenzene derivative.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Slippage of η-allenyl/propargyl to an η structure and tautomerization of η-propargyl to η-allenyl in ligand addition and substitution reactions of platinum(II) complexes

Reactions of [(PPh₃)₂Pt(η³-CH₂CCPh)]OTf with each of PMe₃, CO and Br⁻ result in the addition of these species to the metal and a change in hapticity of the η³-CH₂CCPh to η¹-CH₂CCPh or η¹-C(Ph)=C=CH₂. Thus, PMe₃ affords [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺, CO gives both [trans-(PPh₃)₂Pt(CO)(η¹-CH₂CCPh)]⁺ and [trans-(PPh₃)₂Pt(CO)(η¹-C(Ph)=C=CH₂)]⁺, and LiBr yields cis-(PPh₃)₂PtBr(η¹-CH₂CCPh), which undergoes isomerization to trans-(PPh₃)₂PtBr(η¹-CH₂CCPh). Substitution reactions of cis- and trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) each lead to tautomerization of η¹-CH₂CCPh to η¹-C(Ph)=C=CH₂, with trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) affording [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺ at ambient temperature and the slower reacting cis isomer giving [trans-(PPh₃)(PMe₃)₂Pt(η¹-C(Ph)=C=CH₂)]⁺ at 54 °C . All new complexes were characterized by a combination of elemental analysis, FAB mas spectrometry and IR and NMR (¹H, ¹³C{¹H} and ³¹P{¹H}) spectroscopy. The structure of [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]BPh₄·0.5MeOH was determined by single-crystal X-ray diffraction analysis.     

Kinetics and mechanisms of ligand substitution reactions of molybdenum SO2 complexes. Synthesis and X-ray structure of trans-Mo(CO)2 (dmpe) (PPh3) (SO2)

Kinetic results are reported for intramolecular PPh₃ substitution reactions of Mo(CO)₂(η¹-L)(PPh₃)₂(SO₂) to form Mo(CO)₂(η²-L)(PPh₃)(SO₂) (L = DMPE = (Me)₂PC₂H₄P(Me)₂ and dppe=Ph₂PC₂H₄PPh₂) in THF solvent, and for intermolecular SO₂ substitutions in Mo(CO)₃(η²-L)(η²-SO₂) (L = 2,2′-bipyridine, dppe) with phosphorus ligands in CH₂Cl₂ solvent. Activation parameters for intramolecular PPh₃ substitution reactions: ΔH^≠ values are 12.3 kcal/mol for dmpe and 16.7 kcal/mol for dppe; ΔS^≠ values are −30.3 cal/mol K for dmpe and −16.4 cal/mol K for dppe. These results are consistent with an intramolecular associative mechanism. Substitutions of SO₂ in MO(CO)₃(η²-L)(η²-SO₂) complexes proceed by both dissociative and associative mechanisms. The facile associative pathways for the reactions are discussed in terms of the ability of SO₂ to accept a pair of electrons from the metal, with its bonding transformations of η²-SO₂ to η¹-pyramidal SO₂, maintaining a stable 18-e count for the complex in its reaction transition state. The structure of Mo(CO)₂(dmpe)(PPh₃)(SO₂) was determined crystallographically: P2₁/c, A=9.311(1), B = 16.344(2), C = 18.830(2) Å, ß=91.04(1)°, V=2865.1(7) ų, Z=4, R(F)=3.49%.     

Ligand connected metal clusters. The molecular structures and solid state packing of {Ru3(CO)11}2(bis(diphenylphosphino)ethane) and {Ru3(CO)11}2(1,4-bis(diphenylphosphino)benzene)

The preparation and structural characterization of {Ru₃(CO)₁₁}₂(1,4-bis(diphenylphosphino)benzene), a modified synthesis of 1,4-bis(diphenylphosphino)benzene, and the structural characterization of {Ru₃(CO)₁₁}₂(bis(diphenylphosphino)ethane) are reported. In both compounds two metal cluster units are connected through ditertiary-phosphine ligands. Both molecules consist of centrosymmetric units in which the diphosphine ligands are largely covered by the triangular ruthenium clusters. No direct interaction between the two cluster units occurs within individual molecules. Molecular packing in the solid state is dominated by interactions between sets of carbon monoxide ligands in motifs that were previously identified in the solid state structure of the parent cluster, Ru₃(CO)₁₂.     

Crown ether mediated cadmium halide dimers and polymers

The reactions of cadmium halides with the 15-membered macrocyclic crown ethers, 15-crown-5 and benzo-15-crown-5, have been carried out and six new complexes have been isolated and structurally characterized. Metal to ligand stoichiometries of 1:1, 2:1, 3:1 and 3:2 have been observed with a variety of different formulations. Examples of charge separated ion pairs ([(NH₄)(benzo-15-crown-5)₂]₂[Cd₂I₆]), halogen bridged monomers, dimers or polymers ([Cd(15-crown-5)(OHMe)(μ-Br)CdBr₃], [Cd(15-crown-5)(μ-Br)₂CdBr(μ-Br)]₂(isolated from the same reaction mixture) and [(CdCl₂)₂CdCl₂(15-crown-5)]_n), and hydrogen bonded finite chains or polymers ([(Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN and [CdI₂(OH₂)₂(THF)]·benzo-15-crown-5) have been isolated. Three different types of 15-crown-5 coordination modes have been observed in these complexes. In-cavity coordination resulting in pentagonal bipyramidal geometries about Cd²⁺ was observed in [(CdCl₂)₂CdCl₂(15-crown-5)]_n, [Cd(15-crown-5)(OHMe)(μ-Br)CdBr₃], and [Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN, [Cd(15-crown-5)(μ-Br)₂CdBr(μ-Br)]₂ displays out-of-cavity coordination with one etheric donor distorted into an axial position of a distorted pentagonal bipyramid. The third coordination mode is secondary sphere coordination via hydrogen bonding which is observed for [Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN. The good fit of Cd²⁺ within the cavity of 15-crown-5 results in shorter bonding contacts and a more narrow distribution in Cd---O values (2.273(7)-2.344(6) Å) than observed for cadmium halide complexes of 18-crown-6 (Cd---O = 2.69(1)–2.81(1) Å).     

Dialkyl-μ-ethylidene-μ-methylene-bis(pentamethylcyclopentadienyl)-dirhodium complexes: synthesis, spectra and decomposition reactions

The dialkyl-μ-ethylidene-μ-methylene-bis (pentamethylcyclopentadienyl)-dirhodium complexes [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (R)₂] (4, P=Me; 5, Et; 6, n-Bu; 7, CH=CH₂; and 8, Z-CH=CHMe) have been prepared from RMgBr and [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe)(X)₂] (2, X=Cl; 3, X=Br). Structures deduced from the NMR spectra show that the dialkyl complexes can exist in one trans and two cis forms. The decomposition of the dimethyl complex 4 is compared with that of the related di-μ-methylene complex; it reacts readily (30°C, MeCN solution) in the presence of one-electron oxidisers to give propene and methane and a little ethene and some butenes. Mass-spectrometric analysis of the ¹³C labelling in the organics originating from [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (¹³CH₃)₂] shows that methane derives from the Rh---Me, ethene half from the ethylidene and half from coupling of Rh-methyl and a bridging methylene, while the propene arises almost entirely from the ethylidene and a rhodium methyl. The butenes come from coupling of ethylidene, methylene and a Rh-methyl, but only quite small amounts are formed; thus C+C coupling is the major decomposition path for the μ-ethylidenes, in contrast to the di-μ-methylene complexes where C+C+C coupling predominates. The divinyl complex [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (CH=CH₂)₂] also underwent internal C+C coupling on reaction with AgBF₄ in MeCN to give a mixture of the allyl and methylallyl cations [(C₅Me₅)Rh(η³-CH₂CHCHR)(MeCN)]⁺(10, R=H; 11, R=Me).     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Polynuclear copper(II) complexes with μ2-1,1-azide bridges. Structural and magnetic properties

Two novel, weakly antiferromagnetically coupled, tetranuclear copper(II) complexes [Cu₄(PAP)₂(μ₂-1,1-N₃)₂(μ₂-1,3-N₃)₂(μ₂-CH₃OH)₂(N₃)₄ (1) (PAP = 1,4-bis-(2′-pyridylamino)phthalazine) and [Cu₄(PAP3Me)₂ (μ₂-1,1-N₃)₂(μ₂-1,3-N₃)₂(H₂O)₂(NO₂)₂]- (NO₃)₂ (2) (PAP3Me = 1,4-bis-(3′-methyl-2′-pyridyl)aminophthalazine) contain a unique structural with two μ₂-1,1-azide intramolecular bridges, and two μ₂-1,3-azide intermolecular bridges linking pairs of copper(II) centers. Four terminal azide groups complete the five-coordinate structures in 1, while two terminal waters and two nitrates complete the coordination spheres in 2. The dinuclear complexes [Cu₂(PPD)(μ₂-1,1-N₃)(N₃)₂(CF₃SO₃)]CH₃OH) (3) and [Cu₂(PPD)(μ₂-1,1-N₃)(N₃)₂(H₂O)(ClO₄)] (4) (PPD = 3,6-bis-(1′-pyrazolyl)pyridazine) contain pairs of copper centers with intramolecular μ₂-1,1-azid and pyridazine bridges, and exhibit strong antiferromagnetic coupling. A one-dimensional chain structure in 3 occurs through intermolecular μ₂-1,1-azide bridging interactions. Intramolecular Cu-N₃-Cu bridge angles in 1 and 2 are small (107.9 and 109.4°, respectively), but very large in 3 and 4 (122.5 and 123.2°, respectively), in keeping with the magnetic properties. 2 crystallizes in the monoclinic system, space group C2/c with a = 26.71(1), b = 13.51(3), c = 16.84(1) Å, β = 117.35(3)° and R = 0.070, R_w = 0.050. 3 crystallizes in the monoclinic system, space group P2₁/c with a = 8.42(1), b = 20.808(9), c = 12.615(4) Å, β = 102.95(5)° and R = 0.045, R_w = 0.039. 4crystallizes in the triclinic system, space group P1, with a = 10.253(3), b = 12.338(5), c = 8.072(4) Å, = 100.65(4), β = 101.93(3), γ = 87.82(3)° and R = 0.038, R_w = 0.036 . The magnetic properties of 1 and 2 indicate the presence of weak net antiferromagnetic exchange, as indicated by the presence of a low temperature maximum in χ_m (80 K (1), 65 K (2)), but the data do not fit the Bleaney-Bowers equation unless the exchange integral is treated as a temperature dependent term. A similar situation has been observed for other related compounds, and various approaches to the problem will be discussed. Magnetically 3 and 4 are well described by the Bleaney-Bowers equation, exhibiting very strong antiferromagnetic exchange (− 2J = 768(24) cm⁻¹ (3); − 2J = 829(11) cm⁻¹ (4)).     

π-Arene complexes.: Part 12. Synthesis of chromiumtricarbonyl complexes of quinoline and N-methylindoles and selected metallation reactions

The lithiation of indole, using a slight excess of n-butyl lithium in THF, followed by methylation and reaction with [Cr(CO)₆] in refluxing dibutyl ether, resulted in the formation of [Cr(η⁶-N-methylindole)(CO)₃] (1a) and [Cr(η⁶-N-methyl-2-methylindole)(CO)₃] (1b). In contrast, lithiation of quinoline in THF, silylation and the subsequent reaction with [Cr(CO)₆] under similar reaction conditions, afforded [Cr(η⁶-N-trimethylsilyl-2-butyl-1,2-dihydroquinoline)(CO)₃] (2) and [Cr(η⁶-{2-butyl-1,2,3,4-tetrahydroquinoline})(CO)₃] (3). The formation of [Cr(η⁶-2,2′-bis{N-methylindolyl})(CO)₃] (4) implied lithiation at the 2-position of 1a. However, metallation at the 7-position was also indicated during the same reaction. In the presence of [Mn(CO)₅Br], product 4 and the transmetallation product [Cr(η⁶-{7-(N-methylindolyl)Mn(CO)₅})(CO)₃] (5) were isolated. Reaction with titanocene dichloride gave [Cr(η⁶-{2-(N-methylindolyl)TiCp₂Cl})(CO)₃] (6), which slowly converted into [TiCp₂{Cr(η⁶-2-(N-methylindolyl)(CO)₃}₂] (7).     

Substitution kinetics of tetracarbonyl(η-alkene)ruthenium complexes: ALKENE = ethene and methyl acrylate

The kinetics in heptane of displacement of the alkene ligands ethene and methyl acrylate from Ru(CO)₄(η²-alkene) by P(OEt)₃ have been measured. The reactions occur by reversible dissociation of the alkenes, and activation parameters are compared with those for dissociation of CO from Ru(CO)₅ and for reactions of the corresponding Os complexes. A linear free energy relationship for ligand dissociation from Ru(CO)₅, Ru(CO)₄(C₂H₄) and Ru(CO)₄(MA) has a gradient close to unity, indicating virtually complete bond breaking in the transition states. Competition parameters for reactions of what is probably a solvated Ru(CO)₄S intermediate have been measured for the alkenes and P(OEt)₃, and for eleven other P-donor nucleophiles. Correlations with the electronic and steric properties of the P-donors show negligible dependence on the electron donicity of the nucleophiles and a small but significant dependence on their sizes. The sizes were quantified by Tolman cone angles or by ‘cone angle equivalents’ derived directly from Brown's ligand repulsion energies (E_r). These correlations compared with those, reported elsewhere, for reactions of the probably solvated intermediates Co₂(CO)₅(μ²-C₂Ph₂) and H₃Re₃(CO)₁₁ formed by ligand dissociative processes. In all cases the discrimination between nucleophiles by the intermediates is weak confirming their high reactivity and the borderline nature of the mechanisms of these bimolecular reactions between I_d and I_a.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

Reactivity, variable temperature solution H NMR studies and MO calculations of dimolybdenum allenylidene complexes of the type [(η-C5H5)2Mo2(CO)4(μ,η(4e)-C=C=CR1R2)]

The reactivity, towards nucleophiles and electrophiles, of dimolybdenum allenylidene complexes of the type [Cp₂Mo₂(CO)₄(μ,η²(4e)-C=C=CR1R2)] (Cp=η⁵-C₅H₅) has been investigated. The nucleophilic attacks occur at the C_γ carbon atom, while electrophiles affec the C atom. Variable temperature solution ¹H NMR studies show a dynamic behavior of these complexes consisting of an equilibrium between two enantiomers with a symmetrical [Cp₂Mo₂(CO)₄(μ-σ,σ(2e)-C=C=CR1R2)] transition state. Extended Hückel MO calculations have been carried out on the model [Cp₂Mo₂(CO)₄(μ,η²-C=C=CH₂]. The calculated charges of the allenylidene carbon atoms suggest that the electrophilic attacks are under charge control, while the nucleophilic attacks are rather under orbital control.