Bacillus subtilis DNA polymerase III: complete sequence, overexpression, and characterization of the polC gene

Genomic DNA encompassing polC, the structural gene specifying Bacillus subtilis DNA polymerase III (PolIII), was sequenced and found to contain a 4311-bp open reading frame (ORF) encoding a 162.4-kDa polypeptide of 1437 amino acids (aa). The ORF was engineered into an Escherichia coli expression plasmid under the control of the coliphage lambda repressor. Derepression of E. coli transformants carrying the recombinant vector resulted in the high-level synthesis of a recombinant DNA polymerase indistinguishable from native PolIII. N-terminal aa sequence analysis of the recombinant polymerase unequivocally identified the 4311-bp ORF as that of polC. Comparative aa sequence analysis indicated significant homology of the B. subtilis enzyme with the catalytic alpha subunit of the E. coli PolIII and, with the exception of an exonuclease domain, little homology with other DNA polymerases. The respective sequences of the mutant polC alleles, dnaF and ts-6, were identified, and the expression of specifically truncated forms of polC was exploited to assess the dependence of polymerase activity on the structure of the enzyme's C terminus.     

Identification, isolation, and characterization of the structural gene encoding the delta' subunit of Escherichia coli DNA polymerase III holoenzyme.

The gene encoding the delta' subunit of DNA polymerase III holoenzyme, designated holB, was cloned by a strategy in which peptide sequence was used to derive a DNA hybridization probe. The gene maps to 24.95 centisomes of the chromosome. Sequencing of holB revealed a 1,002-bp open reading frame predicted to produce a 36,936-Da protein. The gene has a ribosome-binding site and promoter that are highly similar to the consensus sequences and is flanked by two potential open reading frames. Protein sequence analysis of delta' revealed a high degree of similarity to the dnaX gene products of Escherichia coli and Bacillus subtilis, including one stretch of 10 identical amino acid residues. A lesser degree of similarity to the gene 44 protein of bacteriophage T4 and the 40-kDa protein of the A1 complex (replication factor C) of HeLa cells was seen. The gene, when placed into a tac promoter-based expression plasmid, directed expression of two proteins of similar size. By immunodetection with anti-holoenzyme immunoglobulin G, both proteins are judged to be products of holB.     

DNA polymerase III of Enterococcus faecalis: expression and characterization of recombinant enzymes encoded by the polC and dnaE genes

Enterococcus faecalis (Ef) dnaE and polC, the respective genes encoding the DNA replication-specific DNA polymerase III E and DNA polymerase III C, were cloned and engineered for expression in Escherichia coli as hexahistidine (his6)-tagged recombinant proteins. Each gene expressed a catalytically active DNA polymerase of the expected molecular weight. The recombinant polymerases were purified and each was characterized with respect to catalytic properties, inhibitor sensitivity, and recognition by specific antibody raised against the corresponding DNA polymerase III of the model Gram-positive (Gr(+)) organism, Bacillus subtilis (Bs). In conclusion, the properties of each Enterococcus polymerase enzymes were similar to those of the respective B. subtilis enzymes.     

The cloned polC gene of Bacillus subtilis: characterization of the azp12 mutation and controlled in vitro synthesis of active DNA polymerase III

Wild type (wt) Bacillus subtilis polC and polCazp12, a mutant derivative specifying a form of DNA polymerase III resistant to hydroxyphenylazopyrimidines, were cloned as genomic fragments approximating the length required to encode the entire polymerase. The cloned DNA fragments were subjected to restriction and partial sequence analysis to locate the 5' end of the polC-specific coding sequence and the azp12 mutation, which was identified as a T----G transversion specifying replacement of serine with alanine. The cloned wt and azp12-coding sequences were recloned in an Escherichia coli expression vector with their respective 5' ends under the control of the bacteriophage lambda PL promoter and cIts857-encoded repressor. In response to induction, the wt- and azp12-specific recombinant plasmids expressed active DNA polymerases indistinguishable from the native enzymes derived from the respective B. subtilis hosts.     

Identification, isolation, and overexpression of the gene encoding the psi subunit of DNA polymerase III holoenzyme.

The gene encoding the psi subunit of DNA polymerase III holoenzyme, holD, was identified and isolated by an approach in which peptide sequence data were used to obtain a DNA hybridization probe. The gene, which maps to 99.3 centisomes, was sequenced and found to be identical to a previously uncharacterized open reading frame that overlaps the 5' end of rimI by 29 bases, contains 411 bp, and is predicted to encode a protein of 15,174 Da. When expressed in a plasmid that also expressed holC, holD directed expression of the psi subunit to about 3% of total soluble protein.     

Sensitive detection of Mycoplasma pulmonis by using the polymerase chain reaction

Detection of Mycoplasma pulmonis was examined by using the polymerase chain reaction (PCR) for amplifying a specific DNA sequence. In gel electrophoresis which was conducted to detect the amplified products, only 1 pg of M. pulmonis DNA could be detected following 30 cycles of amplification, while no amplified product was detected even from 1 microgram of M. arthritidis or M. neurolyticum DNA. Furthermore, 10 colony-forming units of M. pulmonis could be detected by direct amplification from the mycoplasma suspension. These results suggest the usefulness of the PCR as a highly sensitive, specific, and rapid method for direct detection of M. pulmonis.     

Gonococcal protein III. Purification and chemical characterization of the protein,and the DNA sequence of the structural gene

We have purified protein III (PIII) from several strains of gonococcus by extractions with Zwittergent 3,14 followed by cation exchange chromatography and gel filtration. The pI of 8.6 determined by isoelectric focusing was in keeping with the high content of basic amino acids found. PIII from two strains had identical N-terminal sequence. In contrast to PIII in vivo, purified PIII was highly susceptible to proteolysis. Rabit antibodies raised with purified antigen reacted with PIII of all strains tested as well as meningococcal protein 4. Furthermore, intact gonococci or meningococci could absorb 80% of antibodies raised by immunization with the purified PIII. The structural gene of PIII was cloned and the DNA sequenced. The predicted primary structure is strongly homologous to the OmpA proteins of Enterobacteria.     

Cloning of mnuA, a membrane nuclease gene of Mycoplasma pulmonis, and analysis of its expression in Escherichia coli

Membrane nucleases of mycoplasmas are believed to play important roles in growth and pathogenesis, although no clear evidence for their importance has yet been obtained. As a first step in defining the function of this unusual membrane activity, studies were undertaken to clone and analyze one of the membrane nuclease genes from Mycoplasma pulmonis. A novel screening strategy was used to identify a recombinant lambda phage expressing nuclease activity, and its cloned fragment was analyzed. Transposon mutagenesis was used to identify an open reading frame of 1,410 bp, which coded for nuclease activity in Escherichia coli. This gene coded for a 470-amino-acid polypeptide of 53,739 Da and was designated mnuA (for "membrane nuclease"). The MnuA protein contained a prolipoprotein signal peptidase II recognition sequence along with an extensive hydrophobic region near the amino terminus, suggesting that the protein may be lipid modified or that it is anchored in the membrane by this membrane-spanning region. Antisera raised against two MnuA peptide sequences identified an M. pulmonis membrane protein of approximately 42 kDa by immunoblotting, which corresponded to a trypsin-sensitive nucleolytic band of the same size. Maxicell experiments with E. coli confirmed that mnuA coded for a nuclease of unknown specificity. Hybridization studies showed that mnuA sequences are found in few Mycoplasma species, suggesting that mycoplasma membrane nucleases display significant sequence variation within the genus Mycoplasma.     

DNA polymerase III, a second essential DNA polymerase, is encoded by the S. cerevisiae CDC2 gene

Three nuclear DNA polymerases have been described in yeast: DNA polymerases I, II, and III. DNA polymerase I is encoded by the POL1 gene and is essential for DNA replication. Since the S. cerevisiae CDC2 gene has recently been shown to have DNA sequence similarity to the active site regions of other known DNA polymerases, but to nevertheless be different from DNA polymerase I, we examined cdc2 mutants for the presence of DNA polymerases II and III. DNA polymerase II was not affected by the cdc2 mutation. DNA polymerase III activity was significantly reduced in the cdc2-1 cell extracts. We conclude that the CDC2 gene encodes yeast DNA polymerase III and that DNA polymerase III, therefore, represents a second essential DNA polymerase in yeast.     

Molecular cloning, sequencing, and overexpression of the structural gene encoding the delta subunit of Escherichia coli DNA polymerase III holoenzyme.

Using an oligonucleotide hybridization probe, we have mapped the structural gene for the delta subunit of Escherichia coli DNA polymerase III holoenzyme to 14.6 centisomes of the chromosome. This gene, designated holA, was cloned and sequenced. The sequence of holA matches precisely four amino acid sequences obtained for the amino terminus of delta and three internal tryptic peptides. A holA-overproducing plasmid that directs the expression of delta up to 4% of the soluble protein was constructed. Sequence analysis of holA revealed a 1,029-bp open reading frame that encodes a protein with a predicted molecular mass of 38,703 Da. holA may reside downstream of rlpB in an operon, perhaps representing yet another link between structural genes for the DNA polymerase III holoenzyme and proteins involved in membrane biogenesis. These and other features are discussed in terms of genetic regulation of delta-subunit synthesis.     

On the DNA polymerase III of mouse myeloma: partial purification and characterization.

A high molecular weight membrane-bound DNA polymerase from the mouse myeloma, MOPC-104E, has been purified extensively, and characterized with regard to physical and reaction properties. This enzyme, which is readily distinguishable from other myeloma enzymes that are analogous to the recognized forms of cellular DNA polymerase, is ddesignated DNA polymerase III. DNA polymerase III activity in whole homogenates from MOPC-104E was solubilized and then prurifed using a series of ion-exchange chromatographic procedures followed by DNA-cellulose chromatography and glycerol gradient centrifugation; the enzyme activity as measured with poly(rA)-(dT)12-18 as template-primer and Mn2+ as divalent cation, was purified as much as 18,000-fold. In the final stages of the pruification, DNA polymerase III possessed no detectable RNA polymerase activity, nucleoside diphosphokinase activity, or nucease activity toward DNA or single- and double-stranded RNA...     

Identification,molecular cloning and characterization of the gene encoding the χ subunit of DNA polymerase III holoenzyme of Escherichia coli

We have identified a previously reported open reading frame (ORF13) that maps between pepA and valS at 96.6 centisomes of the Escherichia coli genome as the structural gene for the χ subunit of DNA polymerase III holoenzyme. This conclusion is supported by a perfect match of the amino-terminal 24 residues of χ with the DNA sequence of ORF13 and a demonstration that ORF13 directs expression of a protein that co-migrates with authentic χ on SDS-polyacrylamide gels. ORF13, designated holC, was isolated from the E. coli chromosome and inserted into a tac promoter-based expression plasmid to direct production of the χ subunit to 5–7% of the total soluble protein. The 3′ end of holC was sequenced to resolve discrepancies between two published versions.     

Chloroperoxidase from Streptomyces lividans: isolation and characterization of the enzyme and the corresponding gene.

For the first time, a halogenating enzyme which is not known to produce halogenated metabolites has been isolated from a bacterial strain. The gene encoding the nonheme chloroperoxidase (CPO-L) from Streptomyces lividans TK64 was cloned, and its gene product was characterized. S. lividans TK64 produced only very small amounts of the enzyme. After cloning of the gene into Streptomyces aureofaciens Tü24-88, the enzyme was overexpressed up to 3,000-fold. Based on the overexpression, a simple purification procedure using acid precipitation and hydrophobic interaction chromatography was developed. Thus, 54 mg of homogeneous CPO-L could be obtained from 27 g (wet weight) of mycelium. The native enzyme has a molecular weight of 64,000 and consists of two identical subunits. The enzyme does not exhibit an absorption peak in the Soret region of the optical spectrum. X-ray fluorescence spectroscopy revealed that the enzyme does not contain any metal ions in equimolar amounts. CPO-L showed cross-reaction with antibodies raised against the nonheme chloroperoxidase from Pseudomonas pyrrocinia but not with antibodies raised against CPO-T from S. aureofaciens Tü24. CPO-L exhibits substrate specificity only for chlorination, not for bromination. Therefore, monochlorodimedone is only brominated by CPO-L, whereas indole is brominated and chlorinated. The functional chloroperoxidase gene was located on a 1.9-kb SalI DNA fragment. DNA sequence analysis revealed an open reading frame encoding a predicted polypeptide of 276 amino acids. The overall identity of the amino acid sequence to that of chloroperoxidase from P. pyrrocinia was 71%, whereas that to bromoperoxidase BPO-A2 from S. aureofaciens ATCC 10762 was only 42%.     

A non-radioactive DNA probe for the detection of Mycoplasma pulmonis in murine mycoplasmosis

A non-radioactive DNA probe for the detection of Mycoplasma pulmonis was developed by using photobiotin. The probe detected 0.3 ng chromosomal DNA of M. pulmonis. No cross-hybridization was observed between the probe and the other murine mycoplasma species, M. arthritidis and M. neurolyticum.