Two-dimensional correlation spectroscopy and principal component analysis studies of temperature-dependent IR spectra of cotton-cellulose

The FTIR spectra were measured for raw Uplands Sicala-V2 cotton fibers over a temperature range of 40-325 degrees C to explore the temperature-dependent changes in the hydrogen bonds of cellulose. These cotton-cellulose spectra exhibited complicated patterns in the 3800-2800 cm(-1) region and thus were analyzed by both the exploratory principal component analysis (PCA) and two-dimensional (2-D) correlation spectroscopy methods. The exploratory PCA showed that the spectra separate into two groups on the basis of thermal degradation of the cotton-cellulose and the consequent breakage of intersheet H-bonds present in its structure. Frequency variables, which strongly contributed to each principal component highlighted in its loadings plot, were linked to the frequencies assigned to vibrations of the OH groups involved in different kinds of H-bonds, as well as to vibrations of the CH groups. Deeper insights into reorganization of the temperature-dependent hydrogen bonding were obtained by 2-D correlation spectroscopy. Synchronous and asynchronous spectra were analyzed in the temperature ranges of 40 to 150 and 250 to 320 degrees C, the ranges indicated by PCA. Detailed band assignments of the OH stretching region and changes in the patterns of the hydrogen bonding network of the cotton-cellulose were proposed with the aid of the 2-D correlation spectroscopy analysis. Below 150 degrees C, distinctly different bands assigned to the less stable Ialpha and the more stable Ibeta interchain H-bonds O-6-H-6...O-3' were observed at about 3230 and 3270 cm(-1), respectively. Evaporation of water entrapped in the cellulose network was examined by means of the band at about 3610 cm(-1). The cooperativity of hydrogen bonds, which play a key role in the cellulose conformation, was monitored by frequencies assigned to intrachain H-bonds. It was possible to separate the frequencies assigned to the O-2-H-2...O-6 and O-3-H-3...O-5 intrachain H-bonds into two separate ranges, the spread of which was controlled by the cooperativity effect. The temperature dependence of the asynchronous spectra indicated that the less stable O-3-H-3...O-5 bonds gave rise to an absorption extending from 3300 to 3384 cm(-1), while the more stable O-2-H-2...O-6 bonds were characterized by the absorption between 3400 and 3470 cm(-1). The final breaking of the inter- and intrachain H-bonds, which occurs at the higher temperatures, was monitored by the asynchronous peaks at 3533 and 3590 cm(-1), respectively. On the basis of both the exploratory PCA and 2-D correlation spectroscopy investigations, it was possible to extract well-defined wavenumber ranges assigned to different kinds of intra- and interchain hydrogen bonds, as well as to the free OH groups of the cotton-cellulose.     

pH-dependent stability of the human alpha-lactalbumin molten globule state: contrasting roles of the 6 - 120 disulfide and the beta-subdomain at low and neutral pH

Many proteins are capable of populating partially folded states known as molten globule states. Alpha-lactalbumin forms a molten globule under a range of conditions including low pH (the A-state) and at neutral pH in the absence of Ca(2+) with modest amounts of denaturant. The A-state is the most thoroughly characterized and thought to mimic a kinetic intermediate populated during refolding at neutral pH. We demonstrate that the properties and interactions that stabilize the A-state and the pH 7 molten globule of human alpha-lactalbumin differ. The unfolding of the wild-type protein is compared to the unfolding of a variant that lacks the 6 - 120 disulfide bond and to an autonomously folded peptide construct that we have previously shown represents the minimum core structure of the A-state of human alpha-lactalbumin. Studies conducted at pH 2 and 7 show that the disulfide makes little contribution to the stability of the molten globule at pH 7 but is important at pH 2. In contrast, the beta-subdomain of the protein is less important at pH 2 than at pH 7. The role of helix propensity in stabilizing the different forms of the molten globule state is examined and it is shown that it cannot account for the differences. The strikingly different behavior observed at pH 2 and 7 indicates that the A-state may not be a rigorous mimic of the folding intermediate populated at pH 7.     

Quantitative correlation between mRNA secondary structure around the region downstream of the initiation codon and translational efficiency in Escherichia coli

Translational efficiency in Escherichia coli is known to be strongly influenced by the secondary structure around the ribosome‐binding site and the initiation codon in the translational‐initiation region of the mRNA. Several quantitative studies have reported that translational efficiency is attributable to effects on ribosome accessibility predominantly caused by the secondary structure surrounding the ribosome‐binding site. However, the influence of mRNA secondary structure around regions downstream of the initiation codon on translational efficiency after ribosome‐binding step has not been quantitatively studied. Here, we quantitatively analyzed the relationship between secondary structure of mRNA surrounding the region downstream of the initiation codon, referred to as the downstream region (DR), and protein expression levels. Modified hairpin structures containing the initiation codon were constructed by site‐directed mutagenesis, and their effects on expression were analyzed in vivo. The minimal folding free energy (ΔG) of a local hairpin structure was found to be linearly correlated with the relative expression level over a range of fourfold change. These results demonstrate that expression level can be quantitatively controlled by changing the stability of the secondary structure surrounding the DR. Biotechnol. Bioeng. 2009; 104: 611–616 © 2009 Wiley Periodicals, Inc.     

Application of ATR‐FTIR spectroscopy to the study of thermally induced changes in secondary structure of protein molecules in solid state

FTIR spectroscopy in combination with ATR sampling technique is the most accessible analytical technique to study secondary structure of proteins both in solid and aqueous solution. Although several studies have demonstrated the applications of ATR‐FTIR to study conformational changes of solid dried proteins due to dehydration, there are no reports that demonstrate the application of ATR‐FTIR in the study of thermally induced changes of secondary structure of biomolecules directly on the solid state. In this study, four biomolecules of pharmaceutical interest, lysozyme, myoglobine, chymotripsin and human growth hormone (hGH), were studied on the solid state before and after different thermal treatments in order to relate changes of secondary structure to partial or total thermal denaturation processes. The results obtained provide experimental evidence that protein thermal denaturation in the solid state can be detected by displacement of carbonyl bands which correspond to conformational transformations between α–helix to β‐sheet or intermolecular β‐sheet; the molecules studied undergo this transformation when exposed to a temperature close to their denaturation temperature which may become irreversible depending on the extent of the heating treatment. These findings demonstrate that ATR‐FTIR is an effective and time efficient technique that allows the monitoring of the protein thermal denaturation process of solid samples without further reconstitution or prior sample preparation. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 574–584, 2015.     

Fourier transform IR and Fourier transform Raman spectroscopy studies of metallothionein-III: amide I band assignments and secondary structural comparison with metallothioneins-I and -II

The secondary structures of porcine brain Cu(4)Zn(3)-metallothionein (MT)-III and Cd(5)Zn(2)MT-I, Cd(5)Zn(2)MT-II, and Zn(7)MT-I from rabbit livers in the solid state are investigated by Fourier transform IR spectroscopy (FTIR) and Fourier transform Raman spectroscopy (FT-Raman). The Cu(4)Zn(3)MT-III contains 26-28% beta-turns and half-turns, 13-14% 3(10)-helices, 47-49% random coils, and 11-12% beta-extended chains. The structural comparison of porcine brain Cu(4)Zn(3)MT-III with rabbit liver Cd(5)Zn(2)MT-I (II) and Zn(7)MT-I shows that the contents of the random coil structure are obviously increased. The results indicate that the insert of an acidic hexapeptide in the alpha domain of Cu(4)Zn(3)MT-III possibly forms an alpha helix. However, because the bands assigned to the alpha-helix and random coil structures are overlapped in the spectra, the content of random coil structures in Cu(4)Zn(3)MT-III is therefore higher than those in Cd(5)Zn(2)MT-I, Cd(5)Zn(2)MT-II, and Zn(7)MT-I.     

Vibrational spectroscopic characteristics of secondary structure polypeptides in liquid water: constrained MD simulation studies

Using the constrained MD simulation method in combination with quantum chemistry calculation, Hessian matrix reconstruction, and fragmentation approximation methods, we established a computational scheme for numerical simulations of amide I IR absorption, vibrational circular dichroism (VCD), and 2D IR photon echo spectra of peptides in solution. Six different secondary structure peptides, i.e., alpha-helix, 3(10)-helix, pi-helix, antiparallel and parallel beta-sheets, and polyproline II (P(II)), are considered, and the vibrational characteristic features in their linear and nonlinear spectra in the amide I band region are discussed. Isotope-labeling effects on IR and VCD spectra are notable only for alpha- and pi-helical peptides due to the strong vibrational couplings between two nearest neighboring amide I local oscillators. The amplitudes of difference 2D IR spectra are shown to be strongly dependent on both the extent of mode delocalization and the relative orientation of local mode transition dipoles determined by secondary structure.