基于四引物扩增受阻突变体系PCR 的多重乳腺癌相关SNP 位点检测方法的建立

为提高单核苷酸多态性检测的通量, 引入多重嵌合引物PCR 和毛细管电泳对四引物扩增受阻突变体系PCR 进行改进. 针对乳腺癌位点rs4784227(C>T), rs1219648(G>A)和rs3803662(T>C)设计特异性嵌合引物, 经一次PCR扩增后, 通过毛细管电泳分析产物长度, 同时确定3 个位点的基因型. 70 份全血和口腔拭子样本, 电泳结果均与测序一致, 实现成功分型. 本方法仅需一次PCR 和一次毛细管电泳即可获得3 个位点的分型结果, 操作简单、快速准确.     

Chemical cleavage of mismatch (CCM) to locate base mismatches in heteroduplex DNA

This protocol describes the use of the chemical cleavage of mismatch (CCM) method to assess whether a region of DNA contains mutations and to localize them. Compared with other mutation-detection techniques (such as single strand-conformation polymorphism (SSCP) analysis, denaturing high-performance liquid chromatography (DHPLC) and denaturing gradient gel electrophoresis (DGGE)) that detect mutations in short DNA fragments and require highly specific melting temperatures, CCM has a higher diagnostic sensitivity suited to the detection of mutations in tumor genes, and can analyze amplicons < or = 2 kb in length. To detect mutations, PCR heteroduplexes are incubated with two mismatch-specific reagents. Hydroxylamine modifies unpaired cytosine and potassium permanganate modifies unpaired thymine. The samples are then incubated with piperidine, which cleaves the DNA backbone at the site of the modified mismatched base. Cleavage products are separated by electrophoresis, revealing the identity and location of the mutation. The CCM method can efficiently detect point mutations as well as insertions and deletions. This protocol can be completed in 10 h.     

Single nucleotide polymorphism (SNP) allele frequency estimation in DNA pools using Pyrosequencing

Identifying the genetic variation underlying complex disease requires analysis of many single nucleotide polymorphisms (SNPs) in a large number of samples. Several high-throughput SNP genotyping techniques are available; however, their cost promotes the use of association screening with pooled DNA. This protocol describes the estimation of SNP allele frequencies in pools of DNA using the quantitative sequencing method Pyrosequencing (PSQ). PSQ is a relatively recently described high-throughput method for genotyping, allele frequency estimation and DNA methylation analysis based on the detection of real-time pyrophosphate release during synthesis of the complementary strand to a PCR product. The protocol involves the following steps: (i) quantity and quality assessment of individual DNA samples; (ii) DNA pooling, which may be undertaken at the pre- or post-PCR stage; (iii) PCR amplification of PSQ template containing the variable sequence region of interest; and (iv) PSQ to determine the frequency of alleles at a particular SNP site. Once the quantity and quality of individual DNA samples has been assessed, the protocol usually requires a few days for setting up pre-PCR pools, depending on sample number. After PCR amplification, preparation and analysis of PCR amplicon by PSQ takes 1 h per plate.     

Simple procedure for automatic detection of unstable alleles in the myotonic dystrophy and Huntington's disease loci

Human neurodegenerative and neuromuscular disorders are associated with a class of gene mutations represented by expansion of trinucleotide repeats. DNA testing is important for the diagnosis of these diseases because clinical discrimination is complicated by their late onset and frequently overlapping symptomatology. However, detection of pathologic alleles expanded up to several thousand trinucleotides poses a challenge for the introduction of rapid, fully automatic, and simple DNA diagnostic procedures. Here we propose a simple two-step polymerase chain reaction (PCR) protocol for rapid molecular diagnostics of myotonic dystrophy, Huntington's disease, and possibly also other triplet expansion diseases. Standard PCR amplification with target repeat flanking primers is used for the detection of alleles of up to 100 repeats; next, triplet-primed PCR is applied for detection of larger expansions. Automated capillary electrophoresis of amplicons allows rapid discrimination between normal, premutated and expanded (CTG/CAG)(n) alleles. Using the suggested protocol, the expanded allele was successfully detected in all test DNA samples with known genotypes. Our experience demonstrates that the suggested two-step PCR protocol provides high sensitivity, specificity, and reproducibility; is significantly less time-consuming; is easier to perform; and provides a better basis for automation than previous methods requiring Southern analysis. Therefore, it can be used for confirmation of uncertain clinical diagnoses, for prenatal testing in at-risk families, and, generally in research on these diseases.     

A Rapid and Cost-Effective Method for Genotyping Genome-Edited Animals:A Heteroduplex Mobility Assay Using Microfluidic Capillary Electrophoresis

The recent emergence and application of engineered endonucleases have led to the development of genome editing tools capable of rapidly implementing various targeted genome editions in a wide range of species.Moreover,these novel tools have become easier to use and have resulted in a great increase of applications.Whilst gene knockout(KO) or knockin(KI) animal models are relatively easy to achieve,there is a bottleneck in the detection and analysis of these mutations.Although several methods exist to detect these targeted mutations,we developed a heteroduplex mobility assay on an automated microfluidic capillary electrophoresis system named HMA-CE in order to accelerate the genotyping process.The HMA-CE method uses a simple PCR amplification of genomic DNA(gDNA) followed by an automated capillary electrophoresis step which reveals a heteroduplexes(HD) signature for each mutation.This allows efficient discrimination of wild-type and genome-edited animals down to the single base pair level.     

A high-throughput DNA extraction protocol for tropical molecular breeding programs

Liquid handling robotics and capillary electrophoresis genetic analyzers now offer high-throughput solutions for 2 of the 4 key steps in PCR-based DNA marker-assisted fingerprinting (DNA extraction, PCR amplification, electrophoresis, data analysis). Thus, DNA extraction remains the most significant bottleneck at the bench for large-scale applications in plant breeding and germplasm characterization. We report on a rapid and low-cost method for relatively high-throughput extraction of high-quality DNA from young and mature leaves of sorghum, pearl millet, chickpea, groundnut, and pigeonpea. The procedure uses a modified CTAB/β-mercaptoethanol method for DNA extraction in a 96-well plate. The quantity and quality of the DNA extracted per sample is adequate for more than 1000 PCR reactions. A relatively high throughput of 96–384 samples per person per day can be achieved, depending on the crop. A major timesaving aspect of the protocol is the absence of a manual sample-grinding step. Finally, the cost is a magnitude lower than commercial plate-based kits, and, as such, is likely to have substantial application in tropical molecular breeding programs.     

Developing multiplexed SNP assays with special reference to degraded DNA templates

This protocol describes a single nucleotide polymorphism (SNP) genotyping strategy for highly degraded DNA, using a two-stage multiplex whereby multiple fragments are first amplified in a single exponential reaction and the products of this PCR are added to a linear single-base-extension reaction. It utilizes the analytical power of a capillary electrophoresis system to simultaneously type all the target sites. The protocol is specifically written for use with severely fragmented templates, typical of ancient DNA, and can be adapted to widely used detection platforms. The addition of the single-phase genotyping step avoids the need for the re-amplification and cloning of PCR products, while providing its own controls for the detection of contamination and allelic drop-out. This protocol can facilitate the routine analysis of up to 52 SNP markers (haploid or diploid) in 96 samples in a single day, and is recommended for the authentication of data in all areas of DNA research (population and medical genetics, forensics, ancient DNA).     

Short tandem repeat typing technologies used in human identity testing

Short tandem repeat (STR) typing methods are widely used today for human identity testing applications including forensic DNA analysis. Following multiplex PCR amplification, DNA samples containing the length-variant STR alleles are typically separated by capillary electrophoresis and genotyped by comparison to an allelic ladder supplied with a commercial kit. This article offers a brief perspective on the technologies and issues involved in STR typing.     

High-throughput S-SAP by fluorescent multiplex PCR and capillary electrophoresis in plants

The inherent replicative mode of transposition endows retrotransposons with considerable advantages as genetic tools in plant genome analysis. Here we present a high-throughput sequence-specific amplification polymorphism (S-SAP) method based on copia-like retrotransposons to fulfill the increasing desire of screening large numbers of samples in plants. Classic approach for digestion, ligation and pre-amplification was combined with optimized fluorescent multiplex PCR for simultaneously selective amplifying S-SAP fragments, and multiple S-SAPs were subsequently detected by capillary electrophoresis using ABI PRISM 3700 capillary instruments. Comparisons of results from multiplex PCR with simplex PCR, and from capillary electrophoresis with slab-gel electrophoresis demonstrated that this method is an efficient, economical, and accurate means for high-throughput and large-scale genotyping retrotransposon variation in plants.     

DNA Extraction from small blood volumes and the processing of cellulose blood cards for use in polymerase chain reaction

This article describes two procedures for the purification of genomic DNA from small blood volumes of whole blood using DNAzol^®BD. In the first procedure, DNA is isolated from 1–20 μL of whole blood using a fast and simple protocol that is appropriate for the simultaneous extraction of a large number of samples. The isolated DNA is suitable for gel electrophoresis and polymerase chain reaction (PCR). In the second procedure, cellulose blood cards containing approx 5 μL of dried blood are treated with DNAzol BD in order to retain DNA on the cellulose matrix while removing other cellular components. The blood card with DNA subsequently serves as template in PCR. The blood card processing and amplification procedures are performed in the same PCR tube without any centrifugation steps, making the combined procedures amenable for automated DNA preparation and amplification in a single tube.     

Mutation detection in KRAS Exon 1 by constant denaturant capillary electrophoresis in 96 parallel capillaries

Mutations in KRAS exon 1 oncogene are frequently found in colon carcinomas. A correlation between the mutated KRAS and the prognosis and outcome of treatment of colon cancer patients was reported in the literature. The object of our work was to establish a high-throughput method with high sensitivity to enable screening of tumor mutation status of KRAS exon 1 in large groups of colon cancer patients. KRAS exon 1 sequences from DNA isolated from 191 sporadic colon cancers were PCR amplified using one primer labeled with fluorescein and a second primer extended by a GC-clamp. After PCR amplification samples were subjected to automated 96-array constant denaturant capillary electrophoresis using a modified MegaBACE 1000 sequencing instrument. Mutant samples were identified by characteristic peak patterns. The sensitivity of detection of a mutant allele in a background of the wild-type alleles was 0.3%. Using the 96-array instrument a typical screening of 191 samples for KRAS mutation status could be performed within 2 h. A KRAS exon 1 mutation was found in 66 of 191 (34.6%) of the samples. The 96-array constant denaturant capillary electrophoresis provides an opportunity for the high-sensitivity screening of large cancer populations for KRAS exon 1 mutations.     

Chitosan functionalized magnetic particle-assisted detection of genetically modified soybeans based on polymerase chain reaction and capillary electrophoresis

The high quality of DNA template is one of the key factors to ensure the successful execution of polymerase chain reaction (PCR). Therefore, development of DNA extraction methods is very important. In this work, chitosan modified magnetic particles (MPs) were synthesized and employed for extraction of genomic DNA from genetically modified (GM) soybeans. The extraction protocol used aqueous buffers for DNA binding to and releasing from the surface of the MPs based on the pH inducing the charge switch of amino groups in chitosan modified MPs. The extracted DNA was pure enough (A(260)/A(280)=1.85) to be directly used as templates for PCR amplification. In addition, the PCR products were separated by capillary electrophoresis for screening of GM organisms. The developed DNA extraction method using chitosan modified MPs was capable of preparation of DNA templates, which were PCR inhibitor free and ready for downstream analysis. The whole process for DNA extraction and detection was preferable to conventional methods (phenol-chloroform extraction, PCR, and gel electrophoresis) due to its simplicity and rapidity as well as its avoiding the use of toxic reagents and PCR inhibitors.     

Fluorescence-based single-strand conformation polymorphism analysis of the low density lipoprotein receptor gene by capillary electrophoresis

We describe here a new method to screen for unknown mutations in the low density lipoprotein (LDL) receptor gene by the use of capillary electrophoresis in single-strand conformation polymorphism (SSCP) analysis. To analyze the promoter and all 18 exons, 20 different amplification reactions were necessary. For each polymerase chain reaction (PCR), the forward and reverse primers were 5′ fluorescent-labelled with FAM and HEX, respectively. To test the accuracy of the newly developed method, 61 genetic variants distributed in 16 exons were analyzed. Under identical electrophoresis conditions (13 kV, 30°C, 30 min), 59 mutations were detected by a distinct abnormal SSCP pattern. The two remaining mutations showed only slight abnormalities, which could be amplified by increasing the electrophoresis temperature. The high accuracy, the degree of automation and the speed of analysis make fluorescence-based SSCP analysis with capillary electrophoresis ideal for rapid mutation screening and the technique is well-suited for clinical applications.     

Application of constant denaturant capillary electrophoresis (CDCE) to mutation detection in humans

Constant denaturant electrophoresis is a DNA separation technique based on the principle of cooperative melting equilibrium. DNA sequences with distinct high and low melting domains can be utilized to separate and identify molecules differing by only one base pair in the lower melting domain. Combined with capillary gel electrophoresis and when coupled with high fidelity DNA amplification, this approach can detect mutants at a fraction of 10⁻⁶. Modifications to the capillary elecctrophoretic system have also increased DNA loading capacity which allows for analysis of rare mutations in a large, heterogeneous population such as DNA samples derived from human tissues. Employment of this technology has determined the first mutational spectrum in human cells and tissues in a mitochondrial sequence without phenotypic selection of mutants.     

Mutation screening using fluorescence multiplex denaturing gradient gel electrophoresis (FMD): detecting mutations in the BRCA1 gene

Fluorescent multiplex denaturing gradient gel electrophoresis (FMD) is a mutation screening technique designed to detect unknown as well as previously identified mutations. FMD constitutes a recent modification of the standard denaturing gradient gel electrophoresis (DGGE) technique, which combines multiplex PCR amplification of target DNA using fluorescently labeled primers with DGGE separation of the amplicon mixture, allowing immediate identification of sequence variants by wet gel scanning. FMD permits the simultaneous detection of small insertions, deletions and single nucleotide substitutions among multiple DNA fragments (up to 480 fragments) from 96 samples in parallel for each run. It increases output and reduces cost dramatically compared with classical DGGE, without sacrificing sensitivity and accuracy in detecting mutations. This protocol details an accurate, fast, nonradioactive and cost-effective way to screen the BRCA1 gene for mutations with high sensitivity, providing easily interpreted results. It may also be adapted to screen other target genes and/or used in large-scale epidemiological studies.     

Mutational analysis by a combined application of the multiple restriction fragment-single strand conformation polymorphism and the direct linear amplification DNA sequencing protocols.

We describe here an improved procedure for polymerase chain reaction (PCR)-based single strand conformation polymorphism (SSCP) for rapid mutational detection. To circumvent the restriction of having to analyze relatively short PCR fragments, restriction endonucleases were used to cleave a longer PCR product and the mixture of fragments was analyzed directly in SSCP gel electrophoresis. This multiple restriction fragment (MRF)-SSCP protocol was demonstrated by the detection of a 4-bp deletion in codons 41-42 and a point mutation in the IVS-2 sequence of the human beta-globin gene. The MRF-SSCP or the standard SSCP protocol was then combined with the linear amplification DNA sequencing (LADS) procedure for direct analysis of the PCR products without further purification for an exact characterization of the mutations detected. In the LADS analysis, homo- or heterozygosity of a mutation was easily distinguished by the appearance of a single- or double-lane band in the sequencing gel. The choice of isotope used and different labeling methods were compared and were found, in some cases, to produce SSCP patterns of different complexities. The combined MRF-SSCP/LADS protocol permits rapid mutational analysis of a large number of clinical samples using only very small amounts of materials and can easily be adopted for nonisotopic clinical applications.     

Fast molecular diagnostics of canine T-cell lymphoma by PCR and capillary gel electrophoresis with laser-induced fluorescence detector

Lymphoma is the most common hematopoietic tumor in dogs and manifests as a proliferation of malignant lymphoid cells primarily affecting the lymph nodes or solid visceral organs. We describe the use of capillary gel electrophoresis (CGE) with a laser-induced fluorescence (LIF) detector based on polymerase chain reaction (PCR) to rapidly detect a disorder of the canine T-cell receptor gamma (TCRgamma) gene. After the PCR amplification of the specific TCR( gene in dogs, the 90-bp DNA fragment amplified was separated in a fused-silica capillary by CGE-LIF. Under an electric field of 375 V/cm and with a sieving matrix of 1.5% poly (ethyleneoxide) (M(r) 600,000), the amplified PCR products were analyzed within 4 min by CGE separation. When the CGE-LIF method was applied to real clinical samples of the specific DNA fragment of the TCR( gene, the migration time and the corrected peak area showed relative standard deviations (n=5) of 0.29% and 0.58%, respectively. Both methods of CGE-LIF and slab gel electrophoresis showed same results for nine clinical samples. This PCR/CGE-LIF technique may prove to be a new fast and simple tool for the rapid diagnosis of the PCR-amplified DNA of canine T-cell lymphoma.     

A simple and efficient method for PCR amplifiable DNA extraction from ancient bones

A simple and effective modified ethanol precipitation-based protocol is described for the preparation of DNA from ancient human bones. This method is fast and requires neither hazardous chemicals nor special devices. After the powdering and incubating of the bone samples Dextran Blue was added as a carrier for removing the PCR inhibitors with selective ethanol precipitation. This method could eliminate the time-consuming separate decalcification step, dialysis, application of centrifugation-driven microconcentrators and the second consecutive PCR amplification. The efficiency of this procedure was demonstrated on ten 500–1200-year-old human bones from four different Hungarian burial sites. A mitochondrial specific primer pair was used to obtain sequence information from the purified ancient DNA. The PCR amplification, after our DNA extraction protocol, was successful from each of the 10 bone samples investigated. The results demonstrate that extraction of DNA from ancient bone samples with this new approach increases the success rate of PCR amplification.