Structural characterization of human vimentin rod 1 and the sequencing of assembly steps in intermediate filament formation in vitro using site-directed spin labeling and electron paramagnetic resonance

We have previously established the utility of site-directed spin labeling and electron paramagnetic resonance to determine structural relationships among proteins in intact intermediate filaments. Using this same approach we have introduced spin labels at 21 residues between amino acids 169 and 193 in rod domain 1 of human vimentin. The electron paramagnetic resonance spectra provide direct evidence for the coiled coil nature of the vimentin dimer in this region. This finding is consistent with predictions but has never been demonstrated previously. In a previous study we identified residue 348 in the rod domain 2 as one point of overlap between adjacent dimers in intact filaments. In the present study we defined residue 191 in the rod domain 1 as a second point of overlap and established that the dimers are arranged in an anti-parallel and staggered orientation at this site. Finally, by isolating spin-labeled samples at successive stages during the dialysis that lead to filament assembly in vitro, we have been able to establish a sequence of interactions that occurs during in vitro assembly, starting with the alpha helix and loose coiled coil dimer formation, then the formation of tetrameric species centered on residue 191, followed by interactions centered on residue 348 suggestive of octamer or higher order multimer formation. A continuation of this strategy revealed that both 191-191 and 348-348 interactions are present in low ionic strength Tris buffers when vimentin is maintained at the "protofilament" stage of assembly.     

Structural analysis of vimentin and keratin intermediate filaments by cryo-electron tomography

Intermediate filaments are a large and structurally diverse group of cellular filaments that are classified into five different groups. They are referred to as intermediate filaments (IFs) because they are intermediate in diameter between the two other cytoskeletal filament systems that is filamentous actin and microtubules. The basic building block of IFs is a predominantly alpha-helical rod with variable length globular N- and C-terminal domains. On the ultra-structural level there are two major differences between IFs and microtubules or actin filaments: IFs are non-polar, and they do not exhibit large globular domains. IF molecules associate via a coiled-coil interaction into dimers and higher oligomers. Structural investigations into the molecular building plan of IFs have been performed with a variety of biophysical and imaging methods such as negative staining and metal-shadowing electron microscopy (EM), mass determination by scanning transmission EM, X-ray crystallography on fragments of the IF stalk and low-angle X-ray scattering. The actual packing of IF dimers into a long filament varies between the different families. Typically the dimers form so called protofibrils that further assemble into a filament. Here we introduce new cryo-imaging methods for structural investigations of IFs in vitro and in vivo, i.e., cryo-electron microscopy and cryo-electron tomography, as well as associated techniques such as the preparation and handling of vitrified sections of cellular specimens.     

The intermediate filament architecture as determined by X-ray diffraction modeling of hard alpha-keratin

Despite investigation since the 1950s, the molecular architecture of intermediate filaments has not yet been fully elucidated. Reliable information about the longitudinal organization of the molecules within the filaments and about the lateral interfilament packing is now available, which is not the case for the transverse architecture. Interesting results were recently obtained from in vitro microscopy observations and cross-linking of keratin, desmin, and vimentin analyses. The structural features that emerge from these analyses could not be fully representative of the in vivo architecture because intermediate filaments are subject to polymorphism. To bring new light to the transverse intermediate filament architecture, we have analyzed the x-ray scattering equatorial profile of human hair. Its comparison with simulated profiles from atomic models of a real sequence has allowed results to be obtained that are representative of hard alpha-keratin intermediate filaments under in vivo conditions. In short, the alpha-helical coiled coils, which are characteristic of the central rod of intermediate filament dimers, are straight and not supercoiled into oligomers; the radial density across the intermediate filament section is fairly uniform; the coiled coils are probably assembled into tetrameric oligomers, and finally the oligomer positions and orientations are not regularly ordered. These features are discussed in terms of filament self-assembling and structural variability.     

Lateral A11 type tetramerization in lamins

The assembly of intermediate filaments (IFs) including nuclear lamins is driven by specific interactions of the elementary coiled-coil dimers in both lateral and longitudinal direction. The assembly mode A₁₁ is dependent on lateral tetramerization of the second coiled-coil segment (coil1b) in antiparallel fashion. Recent cryo-electron microscopy studies pointed to 3.5 nm lamin filaments built from two antiparallel threads of longitudinally associated dimers but little molecular detail is available to date. Here we present the 2.6 Å resolution X-ray structure of a lamin A fragment including residues 65–222 which reveals the molecular basis of the A₁₁ interaction. The crystal structure also indicates a continuous α-helical structure for the preceding linker L1 region. The middle part of the antiparallel tetramer reveals unique interactions due to the lamin-specific 42-residue insert in coil1b. At the same time, distinct characteristics of this insert provide for the preservation of common structural principles shared with lateral coil1b tetramers of vimentin and keratin K1/K10. In addition, structural analysis suggests that the A₁₁ interaction in lamins is somewhat weaker than in cytoplasmic IFs, despite a 30% longer overlap. Establishing the structural detail of the A₁₁ interaction across IF types is the first step towards a rational understanding of the IF assembly process which is indispensable for establishing the mechanism of disease-related mutations.     

Chemical cross-linking between lysine groups in vimentin oligomers is dependent on local peptide conformations

Previous studies have shown that cytoplasmic intermediate filaments, other than the keratins, are each constructed from a single type of polypeptide chain. Studies involving chemical crosslinking between lysine groups have shown that assembly of the filaments begins with the formation of dimers in which the peptide chains are parallel and in exact register, and that these dimers further associate in antiparallel patterns having specific degrees of overlap. In the present study, molecular modeling of the conformations of vimentin molecules indicated that lysine side chains in identical positions in regions of α-helix in parallel chains might be unable to be linked because they are on opposite sides of the coiled coil hydrophobic core. Examination of published data on chemical crosslinking of lysines in vimentin confirmed that there were no instances of linkage within dimers between the nine pairs of identical lysines that lie more than one position within α-helical regions in parallel chains. Even among linkages that apparently were between dimers, only one of the 11 linkage products identified involved lysines that were both within an α-helical region. In 10 of the 11 identified linkages between dimers, one or both of the linked lysines were in regions of random coil conformation. These results of molecular modeling indicate that relative motion between polypeptide chains in oligomers of intermediate filament proteins is not sufficient to overcome an orientation of lysine groups that is unfavorable for their chemical linkage. This finding supports the interpretations of keratin cross-linking data indicating that parallel homodimers are the basis for keratin intermediate filament assembly. © 1996 Wiley-Liss, Inc.     

Electron paramagnetic resonance analysis of the vimentin tail domain reveals points of order in a largely disordered region and conformational adaptation upon filament assembly

Very little data have been reported that describe the structure of the tail domain of any cytoplasmic intermediate filament (IF) protein. We report here the results of studies using site directed spin labeling and electron paramagnetic resonance (SDSL‐EPR) to explore the structure and dynamics of the tail domain of human vimentin in tetramers (protofilaments) and filaments. The data demonstrate that in contrast to the vimentin head and rod domains, the tail domains are not closely apposed in protofilaments. However, upon assembly into intact IFs, several sites, including positions 445, 446, 451, and 452, the conserved “beta‐site,” become closely apposed, indicating dynamic changes in tail domain structure that accompany filament elongation. No evidence is seen for coiled‐coil structure within the region studied, in either protofilaments or assembled filaments. EPR analysis also establishes that more than half of the tail domain is very flexible in both the assembly intermediate and the intact IF. However, by positioning the spin label at distinct sites, EPR is able to identify both the rod proximal region and sites flanking the beta‐site motif as rigid locations within the tail. The rod proximal region is well assembled at the tetramer stage with only slight changes occurring during filament elongation. In contrast, at the beta site, the polypeptide backbone transitions from flexible in the assembly intermediate to much more rigid in the intact IF. These data support a model in which the distal tail domain structure undergoes significant conformational change during filament elongation and final assembly.     

Depth-dependent fluorescent quenching of a tryptophan residue located at defined positions on a rigid 21-peptide helix in liposomes

Five lipophilic 21-peptide analogs of the potential-dependent pore-former, alamethicin, were synthesized bearing tryptophan residues at the position 1, 6, 11, 16 and 21 on a long, conformationally rigid, alpha-helix. The alpha-helical conformation was induced and stabilized using the sequential oligomers (Ala-Aib-Ala-Aib-Ala)n as analyzed by CD and NMR. The partitioning of the N-t-butoxycarbonyl 21-peptide methyl esters and the N-terminally deprotected alpha-helices was followed by fluorescence enhancement in phospholipid bilayer vesicles. Quenching experiments were performed by titrating with n-doxyl stearic acids bearing the nitroxide label at positions 5, 7, 10, 12 and 16. This well-defined system revealed that the N- and C-terminal tryptophan residues become situated in the hydrophilic region. Tryptophan at position 11 was found in the lipophilic core, whereas the tryptophan at positions 6 and 16 were localized at intermediate depths of the lipid membrane. Therefore, the helices span the lipid bilayer with their long axis normal to the membrane surface.     

Divide-and-conquer crystallographic approach towards an atomic structure of intermediate filaments

Intermediate filaments (IFs) represent an essential component of the cytoskeleton in higher eukaryotic cells. The elementary building block of the IF architecture is an elongated dimer with its dominant central part being a parallel double-stranded alpha-helical coiled coil. Filament formation proceeds via a specific multi-step association of the dimers into the unit-length filaments, which subsequently anneal longitudinally and finally radially compact into mature filaments. To tackle the challenge of a crystallographic structure determination, we have produced and characterised 17 overlapping soluble fragments of human IF protein vimentin. For six fragments ranging in length between 39 and 84 amino acid residues, conditions yielding macroscopic crystals could be established and X-ray diffraction data were collected to the highest resolution limit between 1.4 and 3 A. We expect that solving the crystal structures of these and further fragments will eventually allow us to patch together a molecular model for the full-length vimentin dimer. This divide-and-conquer approach will be subsequently extended to determining the crystal structures of a number of complexes formed by appropriate vimentin fragments, and will eventually allow us to establish the three- dimensional architecture of complete filaments at atomic resolution.     

Molecular architecture of intermediate filaments

Together with microtubules and actin microfilaments, approximately 11 nm wide intermediate filaments (IFs) constitute the integrated, dynamic filament network present in the cytoplasm of metazoan cells. This network is critically involved in division, motility and other cellular processes. While the structures of microtubules and microfilaments are known in atomic detail, IF architecture is presently much less understood. The elementary 'building block' of IFs is a highly elongated, rod-like dimer based on an alpha-helical coiled-coil structure. Assembly of cytoplasmic IF proteins, such as vimentin, begins with a lateral association of dimers into tetramers and gradually into the so-called unit-length filaments (ULFs). Subsequently ULFs start to anneal longitudinally, ultimately yielding mature IFs after a compaction step. For nuclear lamins, however, assembly starts with a head-to-tail association of dimers. Recently, X-ray crystallographic data were obtained for several fragments of the vimentin dimer. Based on the dimer structure, molecular models of the tetramer and the entire filament are now a possibility.     

Modeling effects of mutations in coiled-coil structures: case study using epidermolysis bullosa simplex mutations in segment 1a of K5/K14 intermediate filaments

The sequence of a protein chain determines both its conformation and its function in vivo. An attempt is made to gain an understanding of the classes of deformations that can arise in an important structural motif, the alpha-helical coiled coil, as a consequence of mutations occurring in its underlying heptad substructure. In order to do so we consider the model structure of segment 1A in intermediate filaments and then investigate the structures arising from each of the 22 mutations observed in cytokeratin K5/K14 molecules that lead to variants of epidermolysis bullosa simplex. These are refined separately using a molecular dynamics protocol. The mutations often result in a significant distortion of the backbone over a turn or so of the alpha helix in either the chain itself or its constituent partner, leading to the likelihood of impaired chain aggregation and hence molecular assembly. One mutant (K14-L143P; 1A-28) gave rise to structural distortion along almost the entire length of segment 1A. The remaining structures showed less deformation, and normal-looking intermediate filaments are likely in vivo. In addition, an identical mutation in the same position in each of the chains in the heterodimer did not necessarily give equivalent structural distortions. Although proline mutations frequently lead to the most severe structural deformations, a non-proline substitution (K14-R125S; 1A-10) gave rise to the largest local structural disruption that was observed. Unexpectedly, mutations in positions a and d were not always of the greatest structural significance, although three in position a were shown by AGADIR to result in a significant increase in alpha-helix stability.     

The crystal structure of the human hepatitis B virus capsid.

Hepatitis B is a small enveloped DNA virus that poses a major hazard to human health. The crystal structure of the T = 4 capsid has been solved at 3.3 A resolution, revealing a largely helical protein fold that is unusual for icosahedral viruses. The monomer fold is stabilized by a hydrophobic core that is highly conserved among human viral variants. Association of two amphipathic alpha-helical hairpins results in formation of a dimer with a four-helix bundle as the major central feature. The capsid is assembled from dimers via interactions involving a highly conserved region near the C terminus of the truncated protein used for crystallization. The major immunodominant region lies at the tips of the alpha-helical hairpins that form spikes on the capsid surface.     

A structural comparison of tryptic fragments of three types of intermediate filaments

We have compared tryptic fragments of three types of intermediate filaments, emphasizing structural characteristics as seen in the electron microscope. Variable, long alpha-helical rod fragments were found to be similar for keratin, neurofilaments and desmin filaments. Short rod fragments from keratin and neurofilaments appeared similar when observed by electron microscopy. Short rod fragments were not seen in desmin filament digests. In addition to these elongated particles, globular fragments, which have not been described previously, were obtained from all three types of intermediate filaments. These globular fragments were characterized by gel filtration and electron microscopy, and compared to globular proteins of known size using both methods. The diameter was about 6 nm and the molecular weight was estimated to be 50 000-60 000. These globular particles may comprise the short, nonhelical regions from several IF protein subunits, which are clustered into an interface in the intact filament or protofilaments.     

Assembly of intermediate filaments

The assembly of intermediate filaments is a fundamental property of the central rod domain of the individual subunit proteins. This rod domain, with its high propensity for α-helix formation, is the common and identifying feature of this family of proteins. Assembly occurs in vitro in the absence of other proteins or exogenous sources of energy; in vivo, it appears as if other factors, as yet poorly understood, modulate the assembly of intermediate filaments. Parallel, in-register dimers form via coiled-coil interactions of the rod domain. Tetramers may form from staggered arrays of parallel or antiparallel arrangements of dimers. Higher-order polymerization, which occurs spontaneously if the ionic strength of a mixture of dimers and tetramers is raised, proceeds rapidly through poorly described intermediates to the final 10 nm filament. This process is dependent on and modulated by the non-α-helical end domains, as well as those amino acids present at the very beginning and end of the rod domain. The interactions governing tetramer formation are most probably the same ones that are responsible for the lateral and longitudinal associations within intermediate filaments.     

Regulatory properties of recombinant tropomyosins containing 5-hydroxytryptophan: Ca2+-binding to troponin results in a conformational change in a region of tropomyosin outside the troponin binding site.

We have introduced tryptophan codons at different positions of the chicken alpha-tropomyosin cDNA (Monteiro, P. B., Lataro, R. C., Ferro, J. A., and Reinach, F. C. (1994) J. Biol. Chem. 269, 10461-10466) and employed a trp auxotrophic Escherichia coli strain to express the proteins in media containing either normal tryptophan, 5-hydroxytrptophan, or 7-azatryptophan. The fluorescence of these latter two tryptophan analogues is excitable at 312-315 nm at which the natural fluorescence of other thin filament proteins (actin, troponin) is not excited. The recombinant tropomyosins have tryptophans or analogues located at amino acid positions 90, 101, 111, 122, or 185 of the protein, all on the external surface of the tropomyosin coiled-coil (positions "c" or "f" of the hydrophobic heptad repeat). The first four mutations are located within the third actin-binding zone of tropomyosin, a region not expected to interact directly with troponin or with neighboring tropomyosin molecules in muscle thin filaments, while position 185 is located in a region that has been implicated in interactions with the globular domain of troponin. The fluorescence intensity of the mutant containing 5-hydroxytryptophan at position 122 (5OH122W) is sensitive to actin binding and sensitive to Ca2+-binding to thin filaments reconstituted with troponin. Assuming that the globular domain of troponin binds to a site between residues 150 and 190 of tropomyosin, the distance between the troponin-binding site and the fluorescent probes at position 122 can be estimated to be 4.2-10.2 nm. While X-ray diffraction and electron micrograph reconstitution studies have provided evidence of Ca2+-induced changes in tropomyosin's interactions in the thin filament, their resolution was not sufficient to distinguish between changes involving the whole tropomyosin molecule or only that region directly interacting with troponin. Here we provide a clear demonstration that Ca2+-binding to troponin results in a conformational change in a region of tropomyosin outside the troponin binding site which is probably associated with a changed interaction with actin.     

Dissecting the 3-D structure of vimentin intermediate filaments by cryo-electron tomography

Vimentin polymerizes via complex lateral interactions of coiled-coil dimers into long, flexible filaments referred to as intermediate filaments (IFs). Intermediate in diameter between microtubules and microfilaments, IFs constitute the third cytoskeletal filament system of metazoan cells. Here we investigated the molecular basis of the 3-D architecture of vimentin IFs by cryo-electron microscopy (cryo-EM) as well as cryo-electron tomography (Cryo-ET) 3-D reconstruction. We demonstrate that vimentin filaments in cross-section exhibit predominantly a four-stranded protofibrilar organization with a right-handed supertwist with a helical pitch of about 96 nm. Compact filaments imaged by cryo-EM appear surprisingly straight and hence appear very stiff. In addition, IFs exhibited an increased flexibility at sites of partial unraveling. This is in strong contrast to chemically fixed, negatively stained preparations of vimentin filaments that generally exhibit smooth bending without untwisting. At some point along the filament unraveling may be triggered and propagates in a cooperative manner so that long stretches of filaments appear to have unraveled rapidly in a coordinated fashion.     

Dual-wavelength stopped-flow analysis of the lateral and longitudinal assembly kinetics of vimentin

Vimentin is a highly charged intermediate filament protein that inherently forms extended dimeric coiled coils, which serve as the basic building blocks of intermediate filaments. Under low ionic strength conditions, vimentin filaments dissociate into uniform tetrameric complexes of two anti-parallel-oriented, half-staggered coiled-coil dimers. By addition of salt, vimentin tetramers spontaneously reassemble into filaments in a time-dependent process: 1) lateral assembly of tetramers into unit-length filaments, 2) longitudinal annealing of unit-length filaments, and 3) longitudinal assembly of filaments coupled with subsequent radial compaction. To independently determine the lateral and longitudinal assembly kinetics, we measure with a stopped-flow instrument the static light scattering signal at two different wavelengths (405 and 594 nm) with a temporal resolution of 3 ms and analyze the signals based on Rayleigh-Gans theory. This theory considers that the intensity of the scattered light depends not only on the molecular weight of the scattering object but also on its shape. This shape dependence is more pronounced at shorter wavelengths, allowing us to decompose the scattered light signal into its components arising from lateral and longitudinal filament assembly. We demonstrate that both the lateral and longitudinal filament assembly kinetics increase with salt concentration.     

Cooperativity mutants of the gamma delta resolvase identify an essential interdimer interaction

gamma delta resolvase, a transposon-encoded site-specific recombinase, catalyzes the resolution of the cointegrate intermediate of gamma delta transposition. The recombination reaction involves the formation of a catalytic nucleoprotein complex whose structure is determined by specific protein-DNA and protein-protein interactions. We have isolated many resolvase mutants and have identified four that are unable to mediate a subclass of higher order protein-protein interactions necessary for recombination. This mutant phenotype is characterized by an inability to catalyze recombination, a loss of cooperative binding to res DNA, and a failure to induce looping out of the DNA between two resolvase binding sites within res. The amino acid side chains identified by the cooperativity mutants cluster on a surface of the protein that mediates an interaction between resolvase dimers in a crystallographic tetramer. We have therefore identified a region of resolvase that mediates an interdimer protein-protein interaction necessary for the formation of the recombinogenic synaptic intermediate.     

Intermolecular versus intramolecular interactions of Dictyostelium myosin: possible regulation by heavy chain phosphorylation

Dictyostelium myosin has been examined under conditions that reveal intramolecular and intermolecular interactions that may be important in the process of assembly and its regulation. Rotary shadowed myosin molecules exhibit primarily two configurations under these conditions: straight parallel dimers and folded monomers. All of the monomers bend in a specific region of the 1860-A-long tail that is 1200 A from the head-tail junction. Molecules in parallel dimers are staggered by 140 A, which is a periodicity in the packing of myosin molecules originally observed in native thick filaments of muscle. The most common region for interaction in the dimers is a segment of the tail about 200-A-long, extending from 900 to 1100 A from the head-tail junction. Parallel dimers form tetramers by way of antiparallel interactions in their tail regions with overlaps in multiples of 140 A. The folded configuration of the myosin molecules is promoted by phosphorylation of the heavy chain by Dictyostelium myosin heavy chain kinase. It appears that the bent monomers are excluded from filaments formed upon addition of salt while the dimeric molecules assemble. These results may provide the structural basis for primary steps in myosin filament assembly and its regulation by heavy chain phosphorylation.     

Properties of the desmin tail domain: studies using synthetic peptides and antipeptide antibodies

Intermediate filament (IF) proteins have a common structural motif consisting of an alpha-helical rod domain flanked by non-alpha-helical amino-terminal head and carboxy-terminal tail domains. Coiled-coil interaction between neighboring rod domains is though to generate the backbone of the 10-nm filament. There must also be other interactions between subunits to bring them into alignment and to effect elongation of the filament, but these are poorly understood. To examine the involvement of the tail domain in filament structure and stabilization, we have studied the interaction between a synthetic peptide corresponding to residues 442-450 of avian desmin, and authentic desmin protein. The potential importance of this region lies in its hydrophilic nature and its high degree of homology among the Type III IF proteins and cytokeratins 8 and 18. The peptide, D442-450, binds to a 27-residue region between lys-436 and leu-463, the carboxy terminus. The presence of the peptide during assembly causes the filaments to appear much more loosely packed than normal desmin IF. We have also generated polyclonal antibodies against this peptide and attempted to localize this portion of the tailpiece along desmin IFs by immunological procedures. By immunoblotting, we found that anti-D442- 450 antibodies recognize desmin and only those proteolytic fragments that contain the tailpiece. In contrast, the antibodies do not label any structure in adult gizzard smooth muscle and skeletal muscle myofibrils in immunofluorescence experiments during which conventional antidesmin antibodies do. At the ultrastructural level, anti-D442-450 antibodies label free desmin tetramers but not desmin IFs. These results show that, as part of an assembled IF, the epitope of anti-D442- 450 is inaccessible to the antibodies, and suggest that either the tailpiece of an IF protein may not be entirely peripheral to the filament backbone, or the interaction between end domains during assembly masks this particular region of the IF molecule.