Structural studies of metal ions in family II pyrophosphatases: the requirement for a Janus ion

Family II inorganic pyrophosphatases (PPases) constitute a new evolutionary group of PPases, with a different fold and mechanism than the common family I enzyme; they are related to the "DHH" family of phosphoesterases. Biochemical studies have shown that Mn(2+) and Co(2+) preferentially activate family II PPases; Mg(2+) partially activates; and Zn(2+) can either activate or inhibit (Zyryanov et al., Biochemistry, 43, 14395-14402, accompanying paper in this issue). The three solved family II PPase structures did not explain the differences between the PPase families nor the metal ion differences described above. We therefore solved three new family II PPase structures: Bacillus subtilis PPase (Bs-PPase) dimer core bound to Mn(2+) at 1.3 A resolution, and, at 2.05 A resolution, metal-free Bs-PPase and Streptococcus gordonii (Sg-PPase) containing sulfate and Zn(2+). Comparison of the new and old structures of various family II PPases demonstrates why the family II enzyme prefers Mn(2+) or Co(2+), as an activator rather than Mg(2+). Both M1 and M2 undergo significant changes upon substrate binding, changing from five-coordinate to octahedral geometry. Mn(2+) and Co(2+), which readily adopt different coordination states and geometries, are thus favored. Combining our structures with biochemical data, we identified M2 as the high-affinity metal site. Zn(2+) activates in the M1 site, where octahedral geometry is not essential for catalysis, but inhibits in the M2 site, because it is unable to assume octahedral geometry but remains trigonal bipyramidal. Finally, we propose that Lys205-Gln81-Gln80 form a hydrophilic channel to speed product release from the active site.     

Rates of elementary catalytic steps for different metal forms of the family II pyrophosphatase from Streptococcus gordonii

Soluble inorganic pyrophosphatases (PPases) form two nonhomologous families, denoted I and II, that have similar active-site structures but different catalytic activities and metal cofactor specificities. Family II PPases, which are often found in pathogenic bacteria, are more active than family I PPases, and their best cofactor is Mn(2+) rather than Mg(2+), the preferred cofactor of family I PPases. Here, we present results of a detailed kinetic analysis of a family II PPase from Streptococcus gordonii (sgPPase), which was undertaken to elucidate the factors underlying the different properties of family I and II PPases. We measured rates of PP(i) hydrolysis, PP(i) synthesis, and P(i)/water oxygen exchange catalyzed by sgPPase with Mn(2+), Mg(2+), or Co(2+) in the high-affinity metal-binding site and Mg(2+) in the other sites, as well as the binding affinities for several active-site ligands (metal cofactors, fluoride, and P(i)). On the basis of these data, we deduced a minimal four-step kinetic scheme and evaluated microscopic rate constants for all eight relevant reaction steps. Comparison of these results with those obtained previously for the well-known family I PPase from Saccharomyces cerevisiae (Y-PPase) led to the following conclusions: (a) catalysis by sgPPase does not involve the enzyme-PP(i) complex isomerization known to occur in family I PPases; (b) the values of k(cat) for the magnesium forms of sgPPase and Y-PPase are similar because of similar rates of bound PP(i) hydrolysis and product release; (c) the marked acceleration of sgPPase catalysis in the presence of Mn(2+) and Co(2+) results from a combined effect of these ions on bound PP(i) hydrolysis and P(i) release; (d) sgPPase exhibits lower affinity for both PP(i) and P(i); and (e) sgPPase and Y-PPase exhibit similar values of k(cat)/K(m), which characterizes the PPase efficiency in vivo (i.e., at nonsaturating PP(i) concentrations).     

An unusual, His-dependent family I pyrophosphatase from Mycobacterium tuberculosis

Soluble inorganic pyrophosphatases (PPases) comprise two evolutionarily unrelated families (I and II). These two families have different specificities for metal cofactors, which is thought to be because of the fact that family II PPases have three active site histidines, whereas family I PPases have none. Here, we report the structural and functional characterization of a unique family I PPase from Mycobacterium tuberculosis (mtPPase) that has two His residues (His21 and His86) in the active site. The 1.3-A three-dimensional structure of mtPPase shows that His86 directly interacts with bound sulfate, which mimics the product phosphate. Otherwise, mtPPase is structurally very similar to the well studied family I hexameric PPase from Escherichia coli, although mtPPase lacks the intersubunit metal binding site found in E. coli PPase. The cofactor specificity of mtPPase resembles that of E. coli PPase in that it has high activity in the presence of Mg2+, but it differs from the E. coli enzyme and family II PPases because it has much lower activity in the presence of Mn2+ or Zn2+. Replacements of His21 and His86 in mtPPase with the residues found in the corresponding positions of E. coli PPase had either no effect on the Mg2+- and Mn2+-supported reactions (H86K) or reduced Mg2+-supported activity (H21K). However, both replacements markedly increased the Zn2+-supported activity of mtPPase (up to 11-fold). In the double mutant, Zn2+ was a 2.5-fold better cofactor than Mg2+. These results show that the His residues in mtPPase are not essential for catalysis, although they determine cofactor specificity.     

Quaternary structure and metal ion requirement of family II pyrophosphatases from Bacillus subtilis, Streptococcus gordonii, and Streptococcus mutans

Pyrophosphatase (PPase) from Bacillus subtilis has recently been found to be the first example of a family II soluble PPase with a unique requirement for Mn2+. In the present work, we cloned and overexpressed in Escherichia coli putative genes for two more family II PPases (from Streptococcus mutans and Streptococcus gordonii), isolated the recombinant proteins, and showed them to be highly specific and active PPases (catalytic constants of 1700-3300 s(-)1 at 25 degrees C in comparison with 200-400 s(-)1 for family I). All three family II PPases were found to be dimeric manganese metalloenzymes, dissociating into much less active monomers upon removal of Mn2+. The dimers were found to have one high affinity manganese-specific site (K(d) of 0.2-3 nm for Mn2+ and 10-80 microm for Mg2+) and two or three moderate affinity sites (K(d) approximately 1 mm for both cations) per subunit. Mn2+ binding to the high affinity site, which occurs with a half-time of less than 10 s at 1.5 mm Mn2+, dramatically shifts the monomer <--> dimer equilibrium in the direction of the dimer, further activates the dimer, and allows substantial activity (60-180 s(-)1) against calcium pyrophosphate, a potent inhibitor of family I PPases.     

Structural analysis of ADP-glucose pyrophosphorylase from the bacterium Agrobacterium tumefaciens

ADP-glucose pyrophosphorylase (ADPGlc PPase) catalyzes the conversion of glucose 1-phosphate and ATP to ADP-glucose and pyrophosphate. As a key step in glucan synthesis, the ADPGlc PPases are highly regulated by allosteric activators and inhibitors in accord with the carbon metabolism pathways of the organism. Crystals of Agrobacterium tumefaciens ADPGlc PPase were obtained using lithium sulfate as a precipitant. A complete anomalous selenomethionyl derivative X-ray diffraction data set was collected with unit cell dimensions a = 85.38 A, b = 93.79 A, and c = 140.29 A (alpha = beta = gamma = 90 degrees ) and space group I 222. The A. tumefaciens ADPGlc PPase model was refined to 2.1 A with an R factor = 22% and R free = 26.6%. The model consists of two domains: an N-terminal alphabetaalpha sandwich and a C-terminal parallel beta-helix. ATP and glucose 1-phosphate were successfully modeled in the proposed active site, and site-directed mutagenesis of conserved glycines in this region (G20, G21, and G23) resulted in substantial loss of activity. The interface between the N- and the C-terminal domains harbors a strong sulfate-binding site, and kinetic studies revealed that sulfate is a competitive inhibitor for the allosteric activator fructose 6-phosphate. These results suggest that the interface between the N- and C-terminal domains binds the allosteric regulator, and fructose 6-phosphate was modeled into this region. The A. tumefaciens ADPGlc PPase/fructose 6-phosphate structural model along with sequence alignment analysis was used to design mutagenesis experiments to expand the activator specificity to include fructose 1,6-bisphosphate. The H379R and H379K enzymes were found to be activated by fructose 1,6-bisphosphate.     

A CBS domain-containing pyrophosphatase of Moorella thermoacetica is regulated by adenine nucleotides

CBS (cystathionine beta-synthase) domains are found in proteins from all kingdoms of life, and point mutations in these domains are responsible for a variety of hereditary diseases in humans; however, the functions of CBS domains are not well understood. In the present study, we cloned, expressed in Escherichia coli, and characterized a family II PPase (inorganic pyrophosphatase) from Moorella thermoacetica (mtCBS-PPase) that has a pair of tandem 60-amino-acid CBS domains within its N-terminal domain. Because mtCBS-PPase is a dimer and requires transition metal ions (Co2+ or Mn2+) for activity, it resembles common family II PPases, which lack CBS domains. The mtCBS-PPase, however, has lower activity than common family II PPases, is potently inhibited by ADP and AMP, and is activated up to 1.6-fold by ATP. Inhibition by AMP is competitive, whereas inhibition by ADP and activation by ATP are both of mixed types. The nucleotides are effective at nanomolar (ADP) or micromolar concentrations (AMP and ATP) and appear to compete for the same site on the enzyme. The nucleotide-binding affinities are thus 100-10000-fold higher than for other CBS-domain-containing proteins. Interestingly, genes encoding CBS-PPase occur most frequently in bacteria that have a membrane-bound H+-translocating PPase with a comparable PP(i)-hydrolysing activity. Our results suggest that soluble nucleotide-regulated PPases act as amplifiers of metabolism in bacteria by enhancing or suppressing ATP production and biosynthetic reactions at high and low [ATP]/([AMP]+[ADP]) ratios respectively.     

The "open" and "closed" structures of the type-C inorganic pyrophosphatases from Bacillus subtilis and Streptococcus gordonii.

Recently, a new class of soluble inorganic pyrophosphatase (type-C PPase) has been described that is not homologous in amino acid sequence or kinetic properties to the well-studied PPases (types A and B) found in many organisms from bacteria to humans and thought to be essential to the cell. Structural studies of the type-C PPases from Streptococcus gordonii and Bacillus subtilis reveal a homodimeric structure, with each polypeptide folding into two domains joined by a flexible hinge. The active site, formed at the interface between the N and C-terminal domains, binds two manganese ions approximately 3.6 A apart in a conformation resembling binuclear metal centres found in other hydrolytic enzymes. An activated water molecule bridging the two metal ions is likely poised for nucleophilic attack of the substrate. Importantly, the S. gordonii and B. subtilis enzymes have crystallised in strikingly different conformations. In both subunits of the S. gordonii crystal structure (1.5 A resolution) the C-terminal domain is positioned such that the active site is occluded, with a sulphate ion bound in the active site. In contrast, in the B. subtilis structure (3.0 A resolution) the C-terminal domain is rotated by about 90 degrees, leaving the active site wide open and accessible for substrate binding.     

Characterization of nuclear phosphoprotein phosphatases from goat testis

Two nuclear phosphoprotein phosphatases (PPases I and II) that cause dephosphorylation of [32P]histone, have been partially purified from goat testis. The enzymic activity is associated with nucleoplasm and chromatin. PPase I is markedly stimulated (approx. 200-600%) by Mg2+ or Mn2+ (1 mM) whereas Ca2+ (1 mM) causes slight stimulation (approx. 35%) of the enzyme. On the contrary, PPase II is only slightly activated (20-40%) by these metal ions (5 mM). Both the phosphoprotein phosphatase isoenzymes are maximally active at pH 6-7. PPases I and II are strongly inhibited (approx. 60-100%) by ZnCl2 (1 mM), P1 (5 mM) and thiol reagents. NaF (5 mM) inhibits (approx. 40%) specifically the activity of PPase I rather than PPase II. PPases are strongly inhibited by relatively high concentration of NaCl (0.4 M), isoenzyme II being more sensitive (approx. 80%) than isoenzyme I (approx. 50%). In addition to histones, both the isoenzymes can as well cause dephosphorylation of protamine, casein, and testicular nuclear proteins. Enzymic characteristics of the testicular nuclear PPases are clearly different from those of the cytosolic enzyme previously characterized.     

Site-specific effects of zinc on the activity of family II pyrophosphatase

Family II pyrophosphatases (PPases), recently found in bacteria and archaebacteria, are Mn(2+)-containing metalloenzymes with two metal-binding subsites (M1 and M2) in the active site. These PPases can use a number of other divalent metal ions as the cofactor but are inactive with Zn(2+), which is known to be a good cofactor for family I PPases. We report here that the Mg(2+)-bound form of the family II PPase from Streptococcus gordonii is nearly instantly activated by incubation with equimolar Zn(2+), but the activity thereafter decays on a time scale of minutes. The activation of the Mn(2+)-form by Zn(2+) was slower but persisted for hours, whereas activation was not observed with the Ca(2+)- and apo-forms. The bound Zn(2+) could be removed from PPase by prolonged EDTA treatment, with a complete recovery of activity. On the basis of the effect of Zn(2+) on PPase dimerization, the Zn(2+) binding constant appeared to be as low as 10(-12) M for S. gordonii PPase. Similar effects of Zn(2+) and EDTA were observed with the Mg(2+)- and apo-forms of Streptococcus mutans and Bacillus subtilis PPases. The effects of Zn(2+) on the apo- and Mg(2+)-forms of HQ97 and DE15 B. subtilis PPase variants (modified M2 subsite) but not of HQ9 variant (modified M1 subsite) were similar to that for the Mn(2+)-form of wild-type PPase. These findings can be explained by assuming that (a) the PPase tightly binds Mg(2+) and Mn(2+) at the M2 subsite; (b) the activation of the corresponding holoenzymes by Zn(2+) results from its binding to the M1 subsite; and (c) the subsequent inactivation of Mg(2+)-PPase results from Zn(2+) migration to the M2 subsite. The inability of Zn(2+) to activate apo-PPase suggests that Zn(2+) binds more tightly to M2 than to M1, allowing direct binding to M2. Zn(2+) is thus an efficient cofactor at subsite M1 but not at subsite M2.     

Crystal structures of 4-alpha-glucanotransferase from Thermococcus litoralis and its complex with an inhibitor

Thermococcus litoralis 4-alpha-glucanotransferase (TLGT) belongs to glucoside hydrolase family 57 and catalyzes the disproportionation of amylose and the formation of large cyclic alpha-1,4-glucan (cycloamylose) from linear amylose. We determined the crystal structure of TLGT with and without an inhibitor, acarbose. TLGT is composed of two domains: an N-terminal domain (domain I), which contains a (beta/alpha)7 barrel fold, and a C-terminal domain (domain II), which has a twisted beta-sandwich fold. In the structure of TLGT complexed with acarbose, the inhibitor was bound at the cleft within domain I, indicating that domain I is a catalytic domain of TLGT. The acarbose-bound structure also clarified that Glu123 and Asp214 were the catalytic nucleophile and acid/base catalyst, respectively, and revealed the residues involved in substrate binding. It seemed that TLGT produces large cyclic glucans by preventing the production of small cyclic glucans by steric hindrance, which is achieved by three lids protruding into the active site cleft, as well as an extended active site cleft. Interestingly, domain I of TLGT shares some structural features with the catalytic domain of Golgi alpha-mannosidase from Drosophila melanogaster, which belongs to glucoside hydrolase family 38. Furthermore, the catalytic residue of the two enzymes is located in the same position. These observations suggest that families 57 and 38 evolved from a common ancestor.     

Structure of the bacteriophage lambda Ser/Thr protein phosphatase with sulfate ion bound in two coordination modes

The protein phosphatase encoded by bacteriophage lambda (lambda PP) belongs to a family of Ser/Thr phosphatases (Ser/Thr PPases) that includes the eukaryotic protein phosphatases 1 (PP1), 2A (PP2A), and 2B (calcineurin). These Ser/Thr PPases and the related purple acid phosphatases (PAPs) contain a conserved phosphoesterase sequence motif that binds a dinuclear metal center. The mechanisms of phosphoester hydrolysis by these enzymes are beginning to be unraveled. To utilize lambda PP more effectively as a model for probing the catalytic mechanism of the Ser/Thr PPases, we have determined its crystal structure to 2.15 A resolution. The overall fold resembles that of PP1 and calcineurin, including a conserved beta alpha beta alpha beta structure that comprises the phosphoesterase motif. Substrates and inhibitors probably bind in a narrow surface groove that houses the active site dinuclear Mn(II) center. The arrangement of metal ligands is similar to that in PP1, calcineurin, and PAP, and a bound sulfate ion is present in two novel coordination modes. In two of the three molecules in the crystallographic asymmetric unit, sulfate is coordinated to Mn2 in a monodentate, terminal fashion, and the two Mn(II) ions are bridged by a solvent molecule. Two additional solvent molecules are coordinated to Mn1. In the third molecule, the sulfate ion is triply coordinated to the metal center with one oxygen coordinated to both Mn(II) ions, one oxygen coordinated to Mn1, and one oxygen coordinated to Mn2. The sulfate in this coordination mode displaces the bridging ligand and one of the terminal solvent ligands. In both sulfate coordination modes, the sulfate ion is stabilized by hydrogen bonding interactions with conserved arginine residues, Arg 53 and Arg 162. The two different active site structures provide models for intermediates in phosphoester hydrolysis and suggest specific mechanistic roles for conserved residues.     

Crystal structure of FabG4 from Mycobacterium tuberculosis reveals the importance of C-terminal residues in ketoreductase activity

Rv0242c, also known as FabG4, is a beta-ketoacyl CoA reductase in Mycobacterium tuberculosis. The crystal structure of C-terminal truncated FabG4 is solved at 2.5? resolution which shows the presence of two distinct domains, domain I and II. Domain I partially resembles "flavodoxin type domain" and the domain II is a typical "ketoacyl CoA reductase (KAR) domain". The enzyme exhibits ketoacyl CoA reductase activity by reducing acetoacyl CoA to 3-hydroxyacyl CoA in presence of NADH. Conserved catalytic triad Ser347, Tyr360, and Lys364 constitute the active site residues of the KAR domain. Presence of the Tyr and the Lys residues in the triad in a particular orientation is imperative for effective catalytic mechanism. The importance of loop I and II and the role of the C-terminal residues of KAR domain are highlighted. Comparative structural analyses clearly demonstrate that loop II is stabilized by hydrophobic interaction with C-terminal residues to sustain the orientation of Tyr360. Loop I interacts with loop II via H-bonding network to restrict the active site residue Lys364 in a catalytically favorable orientation.     

Crystal structure of Rab geranylgeranyltransferase at 2.0 A resolution

BACKGROUND: Rab geranylgeranyltransferase (RabGGT) catalyzes the addition of two geranylgeranyl groups to the C-terminal cysteine residues of Rab proteins, which is crucial for membrane association and function of these proteins in intracellular vesicular trafficking. Unlike protein farnesyltransferase (FT) and type I geranylgeranyltransferase, which both prenylate monomeric small G proteins or short peptides, RabGGT can prenylate Rab only when Rab is in a complex with Rab escort protein (REP). RESULTS: The crystal structure of rat RabGGT at 2.0 A resolution reveals an assembly of four distinct structural modules. The beta subunit forms an alpha-alpha barrel that contains most of the residues in the active site. The alpha subunit consists of a helical domain, an immunoglobulin (Ig)-like domain, and a leucine-rich repeat (LRR) domain. The N-terminal region of the alpha subunit binds to the active site in the beta subunit; residue His2alpha directly coordinates a zinc ion. The prenyl-binding pocket of RabGGT is deeper than that in FT. CONCLUSIONS: LRR and Ig domains are often involved in protein-protein interactions; in RabGGT they might participate in the recognition and binding of REP. The binding of the N-terminal peptide of the alpha subunit to the active site suggests an autoinhibition mechanism that might contribute to the inability of RabGGT to recognize short peptides or Rab alone as its substrate. Replacement of residues Trp102beta and Tyr154beta in FT by Ser48beta and Leu99beta, respectively, in RabGGT largely determine the different lipid-binding specificities of the two enzymes.     

Effects of active site mutations on the metal binding affinity, catalytic competence, and stability of the family II pyrophosphatase from Bacillus subtilis

Family II inorganic pyrophosphatases (PPases) have been recently found in a variety of bacteria. Their primary and tertiary structures differ from those of the well-known family I PPases, although both have a binuclear metal center directly involved in catalysis. Here, we examined the effects of mutating one Glu, four His, and five Asp residues forming or close to the metal center on Mn(2+) binding affinity, catalysis, oligomeric structure, and thermostability of the family II PPase from Bacillus subtilis (bsPPase). Mutations H9Q, D13E, D15E, and D75E in two metal-binding subsites caused profound (10(4)- to 10(6)-fold) reductions in the binding affinity for Mn(2+). Most of the mutations decreased k(cat) for MgPP(i) by 2-3 orders of magnitude when measured with Mn(2+) or Mg(2+) bound to the high-affinity subsite and Mg(2+) bound to both the low-affinity subsite and pyrophosphate. In the E78D variant, the k(cat) for the Mn-bound enzyme was decreased 120-fold, converting bsPPase from an Mn-specific to an Mg-specific enzyme. K(m) values were less affected by the mutations, and, interestingly, were decreased in most cases. Mutations of His(97) and His(98) residues, which lie near the subunit interface, greatly destabilized the bsPPase dimer, whereas most other mutations stabilized it. Mn(2+), in sharp contrast to Mg(2+), conferred high thermostability to wild-type bsPPase, although this effect was reduced by all of the mutations except D203E. These results indicate that family II PPases have a more integrated active site structure than family I PPases and are consequently more sensitive to conservative mutations.     

Domains of Crm1 involved in the formation of the Crm1, RanGTP, and leucine-rich nuclear export sequences trimeric complex.

Nuclear export of proteins containing a leucine-rich nuclear export sequence (NES) is mediated by a specific NES receptor known as Crm1. This protein, which is related to the karyopherin beta family, interacts directly with NES in a RanGTP-dependent manner. To characterize the domains of Crm1 involved in formation of the trimeric Crm1-NES-RanGTP complex, N- and C-terminal deletion mutants of Crm1 were generated and their ability to bind NES and RanGTP in vitro was analyzed. Our results indicate that two regions of Crm1 are required for the formation of the trimeric Crm1-NES-RanGTP complex, the N-terminal domain of Crm1 and the central domain of the receptor, starting after residue 160 with an essential region between 566 and 720. The N-terminal domain is homologous to the RanGTP-binding domain of karyopherin beta and therefore is likely involved in the interaction with RanGTP. Consequently, the central domain likely corresponds to the NES-binding site of Crm1.     

Isomaltulose synthase (PalI) of Klebsiella sp. LX3. Crystal structure and implication of mechanism

Isomaltulose synthase from Klebsiella sp. LX3 (PalI, EC 5.4.99.11) catalyzes the isomerization of sucrose to produce isomaltulose (alpha-D-glucosylpyranosyl-1,6-D-fructofuranose) and trehalulose (alpha-D-glucosylpyranosyl-1,1-d-fructofuranose). The PalI structure, solved at 2.2-A resolution with an R-factor of 19.4% and Rfree of 24.2%, consists of three domains: an N-terminal catalytic (beta/alpha)8 domain, a subdomain between N beta 3 and N alpha 3, and a C-terminal domain having seven beta-strands. The active site architecture of PalI is identical to that of other glycoside hydrolase family 13 members, suggesting a similar mechanism in substrate binding and hydrolysis. However, a unique RLDRD motif in the proximity of the active site has been identified and shown biochemically to be responsible for sucrose isomerization. A two-step reaction mechanism for hydrolysis and isomerization, which occurs in the same pocket is proposed based on both the structural and biochemical data. Selected C-terminal truncations have been shown to reduce and even abolish the enzyme activity, consistent with the predicted role of the C-terminal residues in the maintenance of enzyme conformation and active site topology.     

Ligand binding sites in Escherichia coli inorganic pyrophosphatase: effects of active site mutations

Type I soluble inorganic pyrophosphatases (PPases) are well characterized both structurally and mechanistically. Earlier we measured the effects of active site substitutions on pH--rate profiles for the type I PPases from both Escherichia coli (E-PPase) and Saccharomyces cerevisae (Y-PPase). Here we extend these studies by measuring the effects of such substitutions on the more discrete steps of ligand binding to E-PPase, including (a) Mg(2+) and Mn(2+) binding in the absence of added ligand; (b) Mg(2+) binding in the presence of either P(i) or hydroxymethylbisphosphonate (HMBP), a competitive inhibitor of E-PPase; and (c) P(i) binding in the presence of Mn(2+). The active site of a type I PPase has well-defined subsites for the binding of four divalent metal ions (M1--M4) and two phosphates (P1, P2). Our results, considered in light of pertinent results from crystallographic studies on both E-PPase and Y-PPase and parallel functional studies on Y-PPase, allow us to conclude the following: (a) residues E20, D65, D70, and K142 play key roles in the functional organization of the active site; (b) the major structural differences between the product and substrate complexes of E-PPase are concentrated in the lower half of the active site; (c) the M1 subsite is functionally isolated from the rest of the active site; and (d) the M4 subsite is an especially unconstrained part of the active site.     

Evolutionary conservation of the active site of soluble inorganic pyrophosphatase.

Soluble inorganic pyrophosphatases (PPases) are essential enzymes that are important for controlling the cellular levels of inorganic pyrophosphate (PPi). Although prokaryotic and eukaryotic PPases differ substantially in amino acid sequence, recent evidence now demonstrates clearly that PPases throughout evolution show a remarkable level of conservation of both an extended active site structure, which has the character of a mini-mineral, and a catalytic mechanism. PPases require several (three or four) Mg2+ ions at the active site for activity and many of the 15-17 fully conserved active site residues are directly involved in the binding of metal ions. Each of the eight microscopic rate constants that has been evaluated for the PPases from both Escherichia coli and Saccharomyces cerevisiae is quite similar in magnitude for the two enzymes, supporting the notion of a conserved mechanism.     

The role of Asp42 in Escherichia coli inorganic pyrophosphatase functioning.

Excess of Mg2+ ions is known to inhibit the soluble inorganic pyrophosphatases (PPases). In contrast, the mutant Escherichia coli inorganic pyrophosphatase Asp42-->Asn is three times more active than native and retains its activity at high Mg2+ concentration. In this paper, another two mutant variants with Asp42 replaced by Ala or Glu were investigated to characterize the role of Asp42 in catalysis. pH-independent kinetic parameters of MgPPi hydrolysis and the dissociation constants for the activating and inhibitory Mg2+ ions were calculated. It was shown that Mg2+ inhibition of MgPPi hydrolysis by native PPase exhibited uncompetitive kinetics under the saturating substrate concentration. All three substitutions of Asp42 lead to a sharp decrease of inhibitory Mg2+ affinity to the enzyme. These findings allow determination of the sites of inhibitory and substrate Mg2+ ions binding to PPase. Common features of these mutants allow the conclusion that the function of Asp42 is to accurately coordinate the residues implicated in the substrate and the inhibitory Mg2+ ion binding to PPase active site. Structural analysis of PPase complexed with Mg2+ compared with PPase complexed with Mn2+ and reaction products confirms this supposition.