Cryopreservation and biophysical properties of articular cartilage chondrocytes

In order to successfully cryopreserve articular cartilage chondrocytes, it is important to characterize their osmotic response during the cryopreservation process, as the ice forms and the solutes concentrate. In this study, experimental work was undertaken to determine the osmotic parameters of articular cartilage chondrocytes. The osmotically inactive volume of articular cartilage chondrocytes was determined to be 44% of the isotonic volume. The membrane hydraulic conductivity parameters for water were determined by fitting a theoretical water transport model to the experimentally obtained volumetric shrinkage data; the membrane hydraulic conductivity parameter L(Pg) was found to be 0.0633 microm/min/atm, and the activation energy E, 8.23 kcal/mol. The simulated cooling process, using the osmotic parameters obtained in this study, suggests a cooling rate of 80 degrees C/min for the cryopreservation of the articular cartilage chondrocytes of hogs. The data obtained in this study could serve as a starting point for those interested in cryopreservation of chondrocytes from articular cartilage in other species in which there is clinical interest and there are no parameters for prediction of responses.     

Construction of tissue-engineered cartilage using human placenta-derived stem cells

Human placenta-derived stem cells (hPDSCs) were isolated by trypsinization and further induced into cartilage cells in vitro. The engineered cartilage was constructed by combining hPDSCs with collagen sponge and the cartilage formation was observed by implantation into nude mice. Results showed that hPDSCs featured mesenchymal stem cells and maintained proliferation in vitro for over 30 passages while remaining undifferentiated. All results indicated that hPDSCs have the potential to differentiate into functional cartilage cells in vitro when combined with collagen sponge, which provided experimental evidence for prospective clinical application.     

Injectable tissue-engineered cartilage using a fibrin glue polymer.

The purpose of this study was to demonstrate the feasibility of using a fibrin glue polymer to produce injectable tissue-engineered cartilage and to determine the optimal fibrinogen and chondrocyte concentrations required to produce solid, homogeneous cartilage. The most favorable fibrinogen concentration was determined by measuring the rate of degradation of fibrin glue using varying concentrations of purified porcine fibrinogen. The fibrinogen was mixed with thrombin (50 U/cc in 40 mM calcium chloride) to produce fibrin glue. Swine chondrocytes were then suspended in the fibrinogen before the addition of thrombin. The chondrocyte/polymer constructs were injected into the subcutaneous tissue of nude mice using chondrocyte concentrations of 10, 25, and 40 million chondrocytes/cc of polymer (0.4-cc injections). At 6 and 12 weeks, the neocartilage was harvested and analyzed by histology, mass, glycosaminoglycan content, DNA content, and collagen type II content. Control groups consisted of nude mice injected with fibrin glue alone (without chondrocytes) and a separate group injected with chondrocytes suspended in saline only (40 million cells/cc in saline; 0.4-cc injections). The fibrinogen concentration with the most favorable rate of degradation was 80 mg/cc. Histologic analysis of the neocartilage showed solid, homogeneous cartilage when using 40 million chondrocytes/cc, both at 6 and 12 weeks. The 10 and 25 million chondrocytes/cc samples showed areas of cartilage separated by areas of remnant fibrin glue. The mass of the samples ranged from 0.07 to 0.12 g at 6 weeks and decreased only slightly by week 12. The glycosaminoglycan content ranged from 2.3 to 9.4 percent for all samples; normal cartilage controls had a content of 7.0 percent. DNA content ranged from 0.63 to 1.4 percent for all samples, with normal pig cartilage having a mean DNA content of 0.285 percent. The samples of fibrin glue alone produced no cartilage, and the chondrocytes alone produced neocartilage samples with a significantly smaller mass (0.47 g at 6 weeks and 0.46 g at 12 weeks) when compared with all samples produced from chondrocytes suspended in fibrin glue (p < 0.03). Gel electrophoreses demonstrated the presence of type II collagen in all sample groups. This study demonstrates that fibrin glue is a suitable polymer for the formation of injectable tissue-engineered cartilage in the nude mouse model. Forty million chondrocytes per cc yielded the best quality cartilage at 6 and 12 weeks when analyzed by histology and content of DNA, glycosaminoglycan, and type II collagen.     

Diffusion-weighted MRI and quantitative biophysical modeling of hippocampal neurite loss in chronic stress

Chronic stress has detrimental effects on physiology, learning and memory and is involved in the development of anxiety and depressive disorders. Besides changes in synaptic formation and neurogenesis, chronic stress also induces dendritic remodeling in the hippocampus, amygdala and the prefrontal cortex. Investigations of dendritic remodeling during development and treatment of stress are currently limited by the invasive nature of histological and stereological methods. Here we show that high field diffusion-weighted MRI combined with quantitative biophysical modeling of the hippocampal dendritic loss in 21 day restraint stressed rats highly correlates with former histological findings. Our study strongly indicates that diffusion-weighted MRI is sensitive to regional dendritic loss and thus a promising candidate for non-invasive studies of dendritic plasticity in chronic stress and stress-related disorders.     

Age-related quantitative MRI changes in healthy cartilage: preliminary results

OBJECTIVES: As the early form of OA is characterized by elevated water content in the cartilage tissue, the purpose of this study was to verify in vivo if age-related changes in patellar cartilage in healthy volunteers can be detected using quantitative MRI with T2 mapping and volume measurement MRI methods. DESIGN: Thirty healthy volunteers of various classes of age (18 to 65 years old) were enrolled in this study. MR images of the patellar cartilage were acquired at 1.5T. Patellar cartilage volume and T2 maps were determined. RESULTS: Despite non-significance, there was a trend in reducing cartilage volume with ageing (r: -0.25). In contrast global T2 slightly increased with ageing (r: 0.46). BMI (r: 0.51) and bone volume (r: 0.69) are well correlated to cartilage volume. CONCLUSION. Age-related physiologic changes in the water content of patellar cartilage can be detected using MRI. The proposed T2-mapping method, coupled with other non-invasive MR cartilage imaging techniques, could aid in the early diagnosis of OA.     

Effects of mixing intensity on tissue-engineered cartilage

Mechanical forces regulate the structure and function of many tissues in vivo; recent results indicate that the mechanical environment can decisively influence the development of engineered tissues cultured in vitro. To investigate the effects of the hydrodynamic environment on tissue-engineered cartilage, primary bovine calf chondrocytes were seeded on fibrous polyglycolic acid meshes and cultured in spinner flasks either statically or at one of nine different turbulent mixing intensities. In medium from unmixed flasks, CO(2) accumulated and O(2) was depleted, whereas in medium from mixed flasks the concentrations of both gases approached their equilibrium values. Relative to constructs exposed to nonmixed conditions, constructs exposed to mixing contained higher fractions of collagen, synthesized and released more GAG, but contained lower fractions of GAG. Across the wide range of mixing intensities investigated, the presence or absence of mixing, but not the intensity of the mixing, was the primary determinant of the GAG and collagen content in the constructs. The all-or-none nature of these responses may provide insight into the mechanism(s) by which engineered cartilage perceives changes in its hydrodynamic environment and responds by modifying extracellular matrix production and release. 2001 John Wiley & Sons, Inc.     

Adhesion of tissue-engineered cartilate to native cartilage

Reconstruction of cartilaginous defects to correct both craniofacial deformities and joint surface irregularities remains a challenging and controversial clinical problem. It has been shown that tissue-engineered cartilage can be produced in a nude mouse model. Before tissue-engineered cartilage is used clinically to fill in joint defects or to reconstruct auricular or nasal cartilaginous defects, it is important to determine whether it will integrate with or adhere to the adjacent native cartilage at the recipient site. The purpose of this study was to determine whether tissue-engineered cartilage would adhere to adjacent cartilage in vivo. Tissue-engineered cartilage was produced using a fibrin glue polymer (80 mg/cc purified porcine fibrinogen polymerized with 50 U/cc bovine thrombin) mixed with fresh swine articular chondrocytes. The polymer/chondrocyte mixture was sandwiched between two 6-mm-diameter discs of fresh articular cartilage. These constructs were surgically inserted into a subcutaneous pocket on the backs of nude mice (n = 15). The constructs were harvested 6 weeks later and assessed histologically, biomechanically, and by electron microscopy. Control samples consisted of cartilage discs held together by fibrin glue alone (no chondrocytes) (n = 10). Histologic evaluation of the experimental constructs revealed a layer of neocartilage between the two native cartilage discs. The neocartilage appeared to fill all irregularities along the surface of the cartilage discs. Safranin-O and toluidine blue staining indicated the presence of glycosaminoglycans and collagen, respectively. Control samples showed no evidence of neocartilage formation. Electron microscopy of the neocartilage revealed the formation of collagen fibers similar in appearance to the normal cartilage matrix in the adjacent native cartilage discs. The interface between the neocartilage and the native cartilage demonstrated neocartilage matrix directly adjacent to the normal cartilage matrix without any gaps or intervening capsule. The mechanical properties of the experimental constructs, as calculated from stress-strain curves, differed significantly from those of the control samples. The mean modulus for the experimental group was 0.74 +/- 0.22 MPa, which was 3.5 times greater than that of the control group (p < 0.0002). The mean tensile strength of the experimental group was 0.064 +/- 0.024 MPa, which was 62.6 times greater than that of the control group (p < 0.0002). The mean failure strain of the experimental group was 0.16 +/- 0.061 percent, which was 4.3 times greater than that of the control group (p < 0.0002). Finally, the mean fracture energy of the experimental group was 0.00049 +/- 0.00032 J, which was 15.6 times greater than that of the control group. Failure occurred in all cases at the interface between neocartilage and native cartilage. This study demonstrated that tissue-engineered cartilage produced using a fibrin-based polymer does adhere to adjacent native cartilage and can be used to join two separate pieces of cartilage in the nude mouse model. Cartilage pieces joined in this way can withstand forces significantly greater than those tolerated by cartilage samplesjoined only by fibrin glue.     

Depth-dependent biomechanical and biochemical properties of fetal, newborn, and tissue-engineered articular cartilage

Adult articular cartilage has depth-dependent mechanical and biochemical properties which contribute to zone-specific functions. The compressive moduli of immature cartilage and tissue-engineered cartilage are known to be lower than those of adult cartilage. The objective of this study was to determine if such tissues exhibit depth-dependent compressive properties, and how these depth-varying properties were correlated with cell and matrix composition of the tissue. The compressive moduli of fetal and newborn bovine articular cartilage increased with depth (p<0.05) by a factor of 4-5 from the top 0.1 mm (28+/-13 kPa, 141+/-10 kPa, respectively) to 1 mm deep into the tissue. Likewise, the glycosaminoglycan and collagen content increased with depth (both p<0.001), and correlated with the modulus (both p<0.01). In contrast, tissue-engineered cartilage formed by either layering or mixing cells from the superficial and middle zone of articular cartilage exhibited similarly soft regions at both construct surfaces, as exemplified by large equilibrium strains. The properties of immature cartilage may provide a template for developing tissue-engineered cartilage which aims to repair cartilage defects by recapitulating the natural development and growth processes. These results suggest that while depth-dependent properties may be important to engineer into cartilage constructs, issues other than cell heterogeneity must be addressed to generate such tissues.     

The effect of tissue-engineered cartilage biomechanical and biochemical properties on its post-implantation mechanical behavior

The insufficient load-bearing capacity of today’s tissue-engineered (TE) cartilage limits its clinical application. Focus has been on engineering cartilage with enhanced mechanical stiffness by reproducing native biochemical compositions. More recently, depth dependency of the biochemical content and the collagen network architecture has gained interest. However, it is unknown whether the mechanical performance of TE cartilage would benefit more from higher content of biochemical compositions or from achieving an appropriate collagen organization. Furthermore, the relative synthesis rate of collagen and proteoglycans during the TE process may affect implant performance. Such insights would assist tissue engineers to focus on those aspects that are most important. The aim of the present study is therefore to elucidate the relative importance of implant ground substance stiffness, collagen content, and collagen architecture of the implant, as well as the synthesis rate of the biochemical constituents for the post-implantation mechanical behavior of the implant. We approach this by computing the post-implantation mechanical conditions using a composition-based fibril-reinforced poro-viscoelastic swelling model of the medial tibia plateau. Results show that adverse implant composition and ultrastructure may lead to post-implantation excessive mechanical loads, with collagen orientation being the most critical variable. In addition, we predict that a faster synthesis rate of proteoglycans compared to that of collagen during TE culture may result in excessive loads on collagen fibers post-implantation. This indicates that even with similar final contents, constructs may behave differently depending on their development. Considering these aspects may help to engineer TE cartilage implants with improved survival rates.     

Evaluating joint-space narrowing and cartilage loss in rheumatoid arthritis by using MRI

Introduction

Magnetic resonance imaging (MRI) has been shown to be superior to radiography (XR) for assessing synovitis, osteitis, and bone erosion in rheumatoid arthritis (RA), particularly in clinical trials. However, relatively little has been reported on the ability of MRI to evaluate articular cartilage loss, or joint-space narrowing (JSN), in the hands and wrists. In a previous study, we adapted the nine-point Genant-modified Sharp XR-JSN score for use with MRI (MRI-JSN). In this study, we compare MRI-JSN with XR-JSN by using images from two multicenter clinical trials.

Methods

Baseline XR and 1.5-Tesla MR images of one hand and wrist from each of 47 subjects with RA enrolled in one of two multicenter clinical trials were evaluated by using the XR-JSN and MRI-JSN methods by a single radiologist experienced in the two methods. Radiographs and MR images were read independently on different occasions.

Results

In total, 575 of 611 joints were compared (one metacarpophalangeal joint of the thumb and 35 proximal interphalangeal joints were outside the MRI field of view and could not be assessed). The 22 (47%) subjects showed JSN with both XR and MRI, and 25 (53%) subjects showed no JSN with either method. No subject showed JSN with only one or the other method. MRI showed high agreement with XR (intraclass correlation coefficient = 0.83). Sensitivity of MRI for JSN, by using XR as the gold standard, was 0.94; specificity was 0.91; accuracy was 0.91; positive predictive value was 0.64; and negative predictive value was 0.99.

Conclusions

This validation exercise suggests that MRI JSN scoring may offer a viable alternative to XR JSN scoring in multicenter clinical trials of RA. However, the relative longitudinal sensitivity of MRI to change and the ability to discriminate therapeutic effect on JSN were not evaluated in this study.     

Influence of tissue- and cell-scale extracellular matrix distribution on the mechanical properties of tissue-engineered cartilage

The insufficient load-bearing capacity of today’s tissue- engineered (TE) cartilage limits its clinical application. Generally, cartilage TE studies aim to increase the extracellular matrix (ECM) content, as this is thought to determine the load-bearing properties of the cartilage. However, there are apparent inconsistencies in the literature regarding the correlation between ECM content and mechanical properties of TE constructs. In addition to the amount of ECM, the spatial inhomogeneities in ECM distribution at the tissue scale as well as at the cell scale may affect the mechanical properties of TE cartilage. The relative importance of such structural inhomogeneities on mechanical behavior of TE cartilage is unknown. The aim of the present study was, therefore, to theoretically elucidate the influence of these inhomogeneities on the mechanical behavior of chondrocyte-agarose TE constructs. A validated non-linear fiber-reinforced poro-elastic swelling cartilage model that can accommodate for effects of collagen reinforcement and swelling by proteoglycans was used. At the tissue scale, ECM was gradually varied from predominantly localized in the periphery of the TE construct toward an ECM-rich inner core. The effect of these inhomogeneities in relation to the total amount of ECM was also evaluated. At the cell scale, ECM was gradually varied from localized in the pericellular area, toward equally distributed throughout the interterritorial area. Results from the tissue-scale model indicated that localization of ECM in either the construct periphery or in the inner core may reduce construct stiffness compared with that of constructs with homogeneous ECM. Such effects are more significant at high ECM amounts. At the cell scale, localization of ECM around the cells significantly reduced the overall stiffness, even at low ECM amounts. The compressive stiffness gradually increased when ECM distribution became more homogeneous and the osmotic swelling pressure in the interterritorial area increased. We conclude that for the same amount of ECM content in TE cartilage constructs, superior mechanical properties can be achieved with more homogeneous ECM distribution at both tissue and cell scale. Inhomogeneities at the cell scale are more important than those at the tissue scale.     

A novel rotating-shaft bioreactor for two-phase cultivation of tissue-engineered cartilage

A novel rotating-shaft bioreactor (RSB) was developed for two-phase cultivation of tissue-engineered cartilage. The reactor consisted of a rotating shaft on which the chondrocyte/scaffold constructs (7.5 mm diameter x 3.5 mm thickness) were fixed and a reactor vessel half-filled with medium. The horizontal rotation of the shaft resulted in alternating exposure of the constructs to gas and liquid phases, thus leading to efficient oxygen and nutrient transfer, as well as periodically changing, mild shear stress exerting on the construct surfaces (0-0.32 dyn/cm2 at 10 rpm), as revealed by computer simulation. Strategic operation of the RSB (maintaining rotating speed at 10 rpm for 3 weeks and lowering the speed to 2 rpm in week 4) in combination with higher seeding density (6 x 10(6) chondrocytes/scaffold) and medium perfusion resulted in uniform cell distribution and increased glycosaminoglycan (3.1 mg/scaffold) and collagen (7.0 mg/scaffold) deposition. The 4-week constructs resembled native cartilages in terms of not only gross appearance and cell morphology but also distributions of glycosaminoglycan, total collagen, and type II collagen, confirming the maintenance of chondrocyte phenotype and formation of cartilage-like constructs in the RSB cultures. In summary, the novel RSB may be implicated for in vitro study of chondrogenesis and de novo cartilage development under periodic mechanical loading. With proper optimization of the culture conditions, a RSB may be employed for the production of cartilage-like constructs.     

Prediction of biomechanical properties of articular cartilage with quantitative magnetic resonance imaging

Quantitative magnetic resonance imaging (MRI) is the most potential non-invasive means for revealing the structure, composition and pathology of articular cartilage. Here we hypothesize that cartilage mechanical properties as determined by the macromolecular framework and their interactions can be accessed by quantitative MRI. To test this, adjacent cartilage disk pairs (n=32) were prepared from bovine proximal humerus and patellofemoral surfaces. For one sample, the tissue Young's modulus, aggregate modulus, dynamic modulus and Poisson's ratio were determined in unconfined compression. The adjacent disk was studied at 9.4T to determine the tissue T(2) relaxation time, sensitive to the integrity of the collagen network, and T(1) relaxation time in the presence of Gd-DTPA, a technique developed for the estimation of cartilage proteoglycan (PG) content. Quantitative MRI parameters were able to explain up to 87% of the variations in certain biomechanical parameters. Correlations were further improved when data from the proximal humerus was assessed separately. MRI parameters revealed a topographical variation similar to that of mechanical parameters. Linear regression analysis revealed that Young's modulus of cartilage may be characterized more completely by combining both collagen- and PG-sensitive MRI parameters. The present results suggest that quantitative MRI can provide important information on the mechanical properties of articular cartilage. The results are encouraging with respect to functional imaging of cartilage, although in vivo applicability may be limited by the inferior resolution of clinical MRI instruments.     

Clinically translatable cell tracking and quantification by MRI in cartilage repair using superparamagnetic iron oxides

BACKGROUND: Articular cartilage has very limited intrinsic regenerative capacity, making cell-based therapy a tempting approach for cartilage repair. Cell tracking can be a major step towards unraveling and improving the repair process of these therapies. We studied superparamagnetic iron oxides (SPIO) for labeling human bone marrow-derived mesenchymal stem cells (hBMSCs) regarding effectivity, cell viability, long term metabolic cell activity, chondrogenic differentiation and hBMSC secretion profile. We additionally examined the capacity of synovial cells to endocytose SPIO from dead, labeled cells, together with the use of magnetic resonance imaging (MRI) for intra-articular visualization and quantification of SPIO labeled cells. METHODOLOGY/PRINICIPAL FINDINGS: Efficacy and various safety aspects of SPIO cell labeling were determined using appropriate assays. Synovial SPIO re-uptake was investigated in vitro by co-labeling cells with SPIO and green fluorescent protein (GFP). MRI experiments were performed on a clinical 3.0T MRI scanner. Two cell-based cartilage repair techniques were mimicked for evaluating MRI traceability of labeled cells: intra-articular cell injection and cell implantation in cartilage defects. Cells were applied ex vivo or in vitro in an intra-articular environment and immediately scanned. SPIO labeling was effective and did not impair any of the studied safety aspects, including hBMSC secretion profile. SPIO from dead, labeled cells could be taken up by synovial cells. Both injected and implanted SPIO-labeled cells could accurately be visualized by MRI in a clinically relevant sized joint model using clinically applied cell doses. Finally, we quantified the amount of labeled cells seeded in cartilage defects using MR-based relaxometry. CONCLUSIONS: SPIO labeling appears to be safe without influencing cell behavior. SPIO labeled cells can be visualized in an intra-articular environment and quantified when seeded in cartilage defects.     

A mathematical model of tissue-engineered cartilage development under cyclic compressive loading

In this work a coupled model of solute transport and uptake, cell proliferation, extracellular matrix synthesis and remodeling of mechanical properties accounting for the impact of mechanical loading is presented as an advancement of a previously validated coupled model for free-swelling tissue-engineered cartilage cultures. Tissue-engineering constructs were modeled as biphasic with a linear elastic solid, and relevant intrinsic mechanical stimuli in the constructs were determined by numerical simulation for use as inputs of the coupled model. The mechanical dependent formulations were derived from a calibration and parametrization dataset and validated by comparison of normalized ratios of cell counts, total glycosaminoglycans and collagen after 24-h continuous cyclic unconfined compression from another dataset. The model successfully fit the calibration dataset and predicted the results from the validation dataset with good agreement, with average relative errors up to 3.1 and 4.3 %, respectively. Temporal and spatial patterns determined for other model outputs were consistent with reported studies. The results suggest that the model describes the interaction between the simultaneous factors involved in in vitro tissue-engineered cartilage culture under dynamic loading. This approach could also be attractive for optimization of culture protocols, namely through the application to longer culture times and other types of mechanical stimuli.     

Finite element study of a tissue-engineered cartilage transplant in human tibiofemoral joint

Most tissue-engineered cartilage constructs are more compliant than native articular cartilage (AC) and are poorly integrated to the surrounding tissue. To investigate the effect of an implanted tissue-engineered construct (TEC) with these inferior properties on the mechanical environment of both the engineered and adjacent native tissues, a finite element study was conducted. Biphasic swelling was used to model tibial cartilage and an implanted TEC with the material properties of either native tissue or a decreased elastic modulus and fixed charged density. Creep loading was applied with a rigid impermeable indenter that represented the femur. In comparison with an intact joint, compressive strains in the transplant, surface contact stress in the adjacent native AC and load partitioning between different phases of cartilage were affected by inferior properties of TEC. Results of this study may lead to a better understanding of the complex mechanical environment of an implanted TEC.