Wide variation in effectiveness of laboratory disinfectants against bacteriophages

Aims: The purpose of this study was to identify an effective disinfectant for the inactivation of the bacteriophages (phages) being used in our laboratory, as published studies on phage inactivation are far from unanimous in their conclusions. Methods and Results: The phages studied were three closely related strains of Myoviridae and three strains of Siphoviridae. Three disinfectants which are used commonly in microbiology laboratories were evaluated: Virkon (1%), ethanol (75%) and sodium hypochlorite (2500 ppm available chlorine). The most effective of these was Virkon, which inactivated all six phages rapidly. Ethanol was effective against the Myoviridae but had little effect on the Siphoviridae. Sodium hypochlorite was the least effective of the disinfectants evaluated. Conclusions: The findings of this study demonstrate a wide diversity in the effectiveness of disinfectants tested for inactivation of phages. Significance and Impact of the Study: Of the disinfectants tested Virkon is the most suitable choice for those unable to carry out disinfection validation studies, or where a broad spectrum disinfectant against phages is required. All of the phages in this study showed resilience to inactivation by sodium hypochlorite, and therefore this disinfectant is an unwise choice for use against phage without first assessing its effectiveness.     

Antimicrobial mortar surfaces for the improvement of hygienic conditions

Aims:  To evaluate the effectiveness of various antimicrobial mortar formulations in inhibiting the growth of a selection of pathogens of environmental and hygienic concern.
Methods and Results:  Mortar prisms containing triclosan-incorporated fibres or different concentrations of silver copper zeolites were incubated with Escherichia coli , Listeria monocytogenes , Salmonella enterica or Staphylococcus aureus at 4 or 20°C for 24 h. From plate counting, a substantial bactericidal effect (>4 log units) could only be observed for the mortar specimens containing more than 3% zeolites on cement weight base, the effect being more pronounced at 20°C compared to 4°C. No inhibitory effect could be observed for mortar specimens containing antimicrobial fibres. Adenosinetriphosphate (ATP) measurements allowed for a rapid indication of the occurrence of antimicrobial activity.
Conclusions:  In order to obtain a bactericidal effect on mortar surfaces, concentrations of silver copper zeolites of more then 3% are required.
Significance and Impact of the Study:  To our knowledge, this is the first study in which the effectiveness of various antimicrobial mortar mixtures towards the inhibition of pathogens has been evaluated in a quantitative way. Antimicrobial concrete mixtures can be used for the improvement of the hygienic conditions in a variety of environments.     

Fungicidal effects of chemical disinfectants, UV light, desiccation and heat on the amphibian chytrid Batrachochytrium dendrobatidis

The efficacy of a number of disinfection treatments was tested on in vitro cultures of the fungus Batrachochytrium dendrobatidis, the causative agent of chytridiomycosis in amphibians. The aim was to evaluate the fungicidal effects of chemical disinfectants, sterilising ultraviolet (UV) light, heat and desiccation, using methods that were feasible for either disinfection in the field, in amphibian husbandry or in the laboratory. The chemical disinfectants tested were: sodium chloride, household bleach (active ingredient: sodium hypochlorite), potassium permanganate, formaldehyde solution, Path-X agricultural disinfectant (active ingredient: didecyl dimethyl ammonium chloride, DDAC), quaternary ammonium compound 128 (DDAC), Dithane, Virkon, ethanol and benzalkonium chloride. In 2 series of experiments using separate isolates of B. dendrobatidis, the fungicidal effect was evaluated for various time periods and at a range of chemical concentrations. The end point measured was death of 100% of zoospores and zoosporangia. Nearly all chemical disinfectants resulted in 100%, mortality for at least one of the concentrations tested. However, concentration and time of exposure was critical for most chemicals. Exposure to 70% ethanol, 1 mg Virkon ml(-1) or 1 mg benzalkonium chloride ml(-1) resulted in death of all zoosporangia after 20 s. The most effective products for field use were Path-X and the quaternary ammonium compound 128, which can be used at dilutions containing low levels (e.g. 0.012 or 0.008%, respectively) of the active compound didecyl dimethyl ammonium chloride. Bleach, containing the active ingredient sodium hypochlorite, was effective at concentrations of 1% sodium hypochlorite and above. Cultures did not survive complete drying, which occurred after <3 h at room temperature. B. dendrobatidis was sensitive to heating, and within 4 h at 37 degrees C, 30 min at 47 degrees C and 5 min at 60 degrees C, 100% mortality occurred. UV light (at 1000 mW m(-2) with a wavelength of 254 nm) was ineffective at killing B. dendrobatidis in culture.     

Development and Testing of a Microbiological Assay To Detect Residual Effects of Disinfectant on Hard Surfaces

We describe a glucuronidase bioassay for detecting residual bactericidal activity from the use of disinfectants on hard surfaces; in this assay we used formaldehyde, ethanol, isopropanol, chlorine, and a commercial preparation containing 2-bromo-2-nitro-1,3-propanediol. Chlorine and the commercial preparation showed bactericidal activity (53.5% and 98.2%, respectively) for a week after disinfection.     

Comparison of bacteriostatic and bactericidal activity of 13 essential oils against strains with varying sensitivity to antibiotics

Aims:  To compare the bacteriostatic and bactericidal activity of 13 chemotyped essential oils (EO) on 65 bacteria with varying sensitivity to antibiotics.
Methods and Results:  Fifty-five bacterial strains were tested with two methods used for evaluation of antimicrobial activity (CLSI recommendations): the agar dilution method and the time-killing curve method. EO containing aldehydes ( Cinnamomum verum bark and Cymbopogon citratus ), phenols ( Origanum compactum , Trachyspermum ammi , Thymus satureioides , Eugenia caryophyllus and Cinnamomum verum leaf) showed the highest antimicrobial activity with minimum inhibitory concentration (MIC) <2% (v/v) against all strains except Pseudomonas aeruginosa . Alcohol-based EO ( Melaleuca alternifolia , Cymbopogon martinii and Lavandula angustifolia ) exhibited varying degrees of activity depending on Gram status. EO containing 1·8-cineole and hydrocarbons ( Eucalyptus globulus , Melaleuca cajeputii and Citrus sinensis ) had MIC_90% ≥ 10% (v/v). Against P. aeruginosa , only C. verum bark and O. compactum presented MIC ≤2% (v/v). Cinnamomum verum bark, O. compactum , T. satureioides , C. verum leaf and M. alternifolia were bactericidal against Staphylococcus aureus and Escherichia coli at concentrations ranging from to 0·31% to 10% (v/v) after 1 h of contact. Cinnamomum verum bark and O. compactum were bactericidal against P. aeruginosa within 5 min at concentrations <2% (v/v).
Conclusions:  Cinnamomum verum bark had the highest antimicrobial activity, particularly against resistant strains.
Significance and Impact of the Study:  Bacteriostatic and bactericidal activity of EO on nosocomial antibiotic-resistant strains.     

Development and testing of a microbiological assay to detect residual effects of disinfectant on hard surfaces.

We describe a glucuronidase bioassay for detecting residual bactericidal activity from the use of disinfectants on hard surfaces; in this assay we used formaldehyde, ethanol, isopropanol, chlorine, and a commercial preparation containing 2-bromo-2-nitro-1, 3-propanediol. Chlorine and the commercial preparation showed bactericidal activity (53.5% and 98.2%, respectively) for a week after disinfection.     

Model systems allowing quantification of sensitivity to disinfectants and comparison of disinfectant susceptibility of persistent and presumed nonpersistent Listeria monocytogenes

Aims:  To determine if Listeria monocytogenes persistent strains differ from presumed nonpersistent strains in disinfection susceptibility and to examine the influence of attachment and NaCl on susceptibility.
Methods and Results:  Two model-systems that allowed quantitative inter-strain comparison of disinfectant sensitivity were developed. Persistent L. monocytogenes were not more tolerant to the disinfectants Incimaxx DES and Triquart SUPER than presumed nonpersistent isolates. When calibrating the systems with respect to presence of biological material and cell density, attached bacteria were as sensitive to disinfectants as were planktonic bacteria. Growth with 5% NaCl increased the tolerance of planktonic cells to Incimaxx DES. All strains of spot inoculated L. monocytogenes survived well 20 h of drying when protected by growth media and 5% NaCl, but were not protected by NaCl against disinfection.
Conclusions:  Persistent strains of L. monocytogenes are as susceptible to disinfectants as are presumed nonpersistent strains and attachment does not render the strains more tolerant to disinfectants. Growth with NaCl affected the susceptibility of the planktonic L. monocytogenes to Incimaxx DES and protected spot inoculated cells during drying.
Significance and Impact of the Study:  Attachment to surfaces does not per se offer protection to L. monocytogenes against disinfectants and disinfection tolerances do not appear to influence the ability of a strain to persist.     

Synergistic interactions between cefalexin and kanamycin in Mueller–Hinton broth medium and in milk

Aims:  This study investigated the in vitro bactericidal activity of an intramammary drug product by comparing the kill kinetics of cefalexin and kanamycin, alone and in fixed ratio combination, against Streptococcus uberis , Staphylococcus aureus and Escherichia coli strains isolated from field cases of bovine mastitis. The effect of milk as a diluent on the rate of bacterial killing was also assessed.
Methods and Results:  Antibacterial kill kinetics was determined against each bacterial strain in Mueller–Hinton broth (MHB) and in milk. In MHB, the fixed cefalexin : kanamycin combination (1·5 : 1 w/w) exhibited a clear synergistic bactericidal activity against the strains tested. The combination also showed an enhanced killing activity in milk, as compared to either agent alone.
Conclusions:  The data show the occurrence of synergistic interactions between cefalexin and kanamycin, resulting in a faster and enhanced bactericidal activity against major mastitis pathogens.
Significance and Impact of the Study:  The study demonstrated that the combination exhibited a larger and faster rate of kill of S. aureus , S. uberis and E. coli compared to either cefalexin or kanamycin alone, while using a lower total amount of antibiotic. Synergistic and additive effects were also observed when milk was used as a medium. The results support the use of this combination of narrow spectrum antibiotics to treat clinical mastitis via the intramammary route and provide data on its killing kinetics.     

Genes involved in copper resistance influence survival of Pseudomonas aeruginosa on copper surfaces

Aims:  To evaluate the killing of Pseudomonas aeruginosa PAO1 on copper cast alloys and the influence of genes on survival on copper containing medium and surfaces.
Methods and Results:  Different strains of P. aeruginosa were inoculated on copper containing medium or different copper cast alloys and the survival rate determined. The survival rates were compared with rates on copper-free medium and stainless steel as control. In addition, the effect of temperature on survival was examined.
Conclusions:  Copper cast alloys had been previously shown to be bactericidal to various bacteria, but the mechanism of copper-mediated killing is still not known. In this report, we demonstrate that P. aeruginosa PAO1 is rapidly killed on different copper cast alloys and that genes involved in conferring copper resistance in copper-containing medium also influenced survival on copper cast alloys. We also show that the rate of killing is influenced by temperature.
Significance and Impact of the Study:  To use copper surfaces more widely as bactericidal agents in various settings, it is important to understand how genes influence survival on these surfaces. Here we show that genes shown to be involved in copper resistance in P. aeruginosa PAO1 can have an impact on the length of survival time on copper cast alloys under certain conditions. This is an important first step for evaluation of future use of copper surfaces as bactericidal agents.     

Persistence of chlorine-sensitive Legionella pneumophila in hyperchlorinated installations

Aims:  To study the persistence of Legionella over time in different disinfected facilities and analysing whether failures in bacterial eradication could be the result of a decrease in the susceptibility of the persistent strains to subsequent treatments.
Methods and Results:  A long-term environmental surveillance was carried out in three different facilities associated with cases of Legionnaires' disease (a hospital, a fishing boat and a hotel). Despite several hyperchlorination episodes, amplified fragment length polymorphism, pulsed field gel electrophoresis- Sfi I and arbitrarily primed polymerase chain reaction methods demonstrated that a specific clone of L. pneumophila serogroup 1 was able to survive for 17, 5 and 10 years in the hospital, fishing boat and the hotel, respectively. Isolates from different years from the same facility showed similar minimal inhibitory concentration and minimal bactericidal concentration values against eight different disinfectants.
Conclusions:  Hyperchlorination over long periods of time did not prevent the persistence of L. pneumophila . The lack of effectiveness did not appear to be the result of a decreased susceptibility of Legionella to chlorine. Hyperchlorination did not modify in vitro susceptibility of Legionella to other disinfectants to which the bacteria had not previously been exposed.
Significance and Impact of the Study:  Persistent Legionella in treated installations remain sensitive to disinfectants; hence, new strategies of treatment, different from hyperchlorination, should be developed to achieve bacterial eradication.     

In vitro inhibition activity of different bacteriocin-producing Escherichia coli against Salmonella strains isolated from clinical cases

Aims:  To compare in vitro the inhibitory activity of four bacteriocin-producing Escherichia coli to a well-characterized panel of Salmonella strains, recently isolated from clinical cases in Switzerland.
Methods and Results:  A panel of 68 nontyphoidal Salmonella strains was characterized by pulsed-field gel electrophoresis analysis and susceptibility to antibiotics. The majority of tested strains were genetically different, with 40% resistant to at least one antibiotic. E. coli Mcc24 showed highest in vitro activity against Salmonella (100%, microcin 24), followed by E. coli L1000 (94%, microcin B17), E. coli 53 (49%, colicin H) and E. coli 52 (21%, colicin G) as revealed using a cross-streak activity assay.
Conclusions:  Escherichia coli Mcc24, a genetically modified organism producing microcin 24, and E. coli L1000, a natural strain isolated from human faeces carrying the mcb -operon for microcin B17-production, were the most effective strains in inhibiting in vitro both antibiotic resistant and sensitive Salmonella isolates.
Significance and Impact of the Study:  Due to an increasing prevalence of antibiotic resistant Salmonella strains, alternative strategies to fight these foodborne pathogens are needed. E. coli L1000 appears to be a promising candidate in view of developing biotechnological alternatives to antibiotics against Salmonella infections.     

Use of the modified Robbins device to study the in vitro biofilm removal efficacy of NitrAdine, a novel disinfecting formula for the maintenance of oral medical devices

Aims:  To evaluate the use of the modified Robbins device (MRD) to test disinfection strategies against biofilms that form on oral medical devices and to test the biofilm removal efficacy of NitrAdine^TM, a disinfectant for the maintenance of oral medical devices.
Methods and Results:  Biofilms were grown on discs using the MRD and biofilms formed in this system were used to evaluate the efficacy of NitrAdine^TM and to determine the optimal disinfection conditions. Our data indicate that the use of the MRD allows for the rapid and reproducible formation of high-density biofilms. Determination of the efficacy of NitrAdine^TM revealed high activity against biofilms tested (e.g. >3 log reduction for Candida albicans and Staphylococcus aureus ) and allowed the determination of the optimal conditions for its use.
Conclusion:  The high reproducibility and flexibility of the MRD make it an excellent candidate for standardized testing of disinfectants aimed at reducing biofilms on oral medical devices. Using this system, we were able to demonstrate that NitrAdine^TM exhibits high activity against biofilms formed by the micro-organisms tested.
Significance and Impact of the Study:  Our data suggest that our procedure is appropriate for standardized testing of disinfectants aimed at reducing biofilms on oral medical devices.     

The survival of Salmonella enterica serovar Typhimurium DT104 and total viable counts on beef surfaces at different relative humidities and temperatures

Aims:  The aim of this study was to investigate changes in Salmonella and total viable count (TVC) survival on beef carcass surfaces stored for 72 h under different combinations of relative humidity (i.e. RH 75% or 96%) and temperature (5°C or 10°C).
Methods and Results:  The influence of low water activity ( a _w) and temperature on the survival and growth of Salmonella enterica serovar Typhimurium DT104 and the aerobic mesophilic flora on meat pieces from different sites on beef carcasses was investigated, under controlled conditions (75% or 96% RH; 5 or 10°C) in an environmental cabinet. Salmonella counts declined during storage at low a _w (75% RH) conditions at 5°C or 10°C. Salmonella counts increased during storage at high a _w (96% RH) at 10°C only. At 5°C, TVCs increased during storage at high a _w, but not at low a _w. TVCs increased on all samples from carcasses stored at high or low a _w at 10°C, except those samples taken from areas of surface fat.
Conclusions:  This suggests that substrate composition dictates growth rates under low a _w conditions. The results are discussed in terms of the possible protective effects of substrate osmolyte accumulation in bacterial survival and/or growth.
Significance and Impact of the Study:  The data obtained in this study provides useful insights on the influence of a _w and temperature on pathogen survival on meat surfaces at chill temperature.     

Bovicin HC5 reduces thermal resistance of Alicyclobacillus acidoterrestris in acidic mango pulp

Aims:  To test the effect of bovicin HC5 against vegetative cells and endospores of Alicyclobacillus acidoterrestris DSMZ 2498 in synthetic media and in acidic mango pulp.
Methods and Results:  Alicyclobacillus acidoterrestris was grown in synthetic medium at 40°C and pH 4·0. The effect on vegetative cells was assayed by adding bovicin HC5 to synthetic medium (40–160 AU ml⁻¹) or to mango pulp (100 AU ml⁻¹) at various pH values and determining the effect on growth (OD_600nm) and viable cell number, respectively. The effect of bovicin HC5 on spore germination and thermal sensitivity of A. acidoterrestris was tested in mango pulp (pH 4·0) containing 80 AU ml⁻¹ of bovicin HC5. Bovicin HC5 was bactericidal against vegetative cells of A. acidoterrestris at different pH values and showed sporicidal activity against endospores of this bacterium. When spores of A. acidoterrestris were heat treated in the presence of bovicin HC5, D -values decreased 77% to 95% compared to untreated controls at temperatures ranging from 80 to 95°C.
Conclusion:  Bovicin HC5 was bactericidal and sporicidal against A. acidoterrestrsi DSMZ 2498.
Significance and Impact of the Study:  These results indicated that bovicin HC5 has potential to prevent spoilage of acidic fruit juices by thermocidophilic spore-forming bacteria.     

Isolation and characterization of bacteriophages for avian pathogenic E. coli strains

Aims:  To isolate and characterize bacteriophages, and to evaluate its lytic performance against avian pathogenic Escherichia coli (APEC) strains with high patterns of antibiotic resistance, in order to select phages for a therapeutic product to treat colibacillosis in chickens.
Methods and Results:  Bacteriophages were isolated from poultry sewage and tested against 148 O-serotyped APEC strains. The morphological characterization of the bacteriophages was made by transmission electronic microscopy (TEM) observations and the genetic comparison between bacteriophages DNA was performed by restriction fragment length polymorphism (RFLP) patterns. Results showed that 70·5% of the tested E. coli strains were sensitive to a combination of three of the five isolated phages, that seemed to be virulent and taxonomically belong to the Caudovirales order. Two of them look like 16–19, T4-like phages ( Myoviridae ) and the third is a T1-like phage and belongs to Syphoviridae family. All of them are genetically different.
Conclusions:  It was possible to obtain a combination of three different lytic bacteriophages with broad lytic spectra against the most prevalent O-serotypes of APEC.
Significance and Impact of the Study:  Data reported in this study, presents an in vitro well studied phage product to be used as antimicrobial agent to treat colibacillosis in poultry industry.     

The estimation of pooled-sample sensitivity for detection of Salmonella in turkey flocks

Aims:  To investigate the effectiveness of pooled sampling methods for detection of Salmonella in turkey flocks.
Methods and Results:  Individual turkey droppings were taken from 43 flocks, with half the dropping tested for S almonella as an individual sample and the other half included in a pool of five. A pair of boot swabs and a dust sample were also taken from each flock. The results were analysed using Bayesian methods in the absence of a gold standard. This showed a dilution effect of mixing true-positive with negative samples, but even with this the pooled faecal samples were found to be a highly efficient method of testing compared with individual faecal samples. The more samples included in the pool, the more sensitive the pooled sampling method was predicted to be. The sensitivity of dust sampling was much more sensitive than faecal sampling at low prevalence.
Conclusions:  Pooled faecal sampling is an efficient method of Salmonella detection in turkey flocks. The additional testing of a dust sample greatly increased the effectiveness of sampling, especially at low prevalence.
Significance and Impact of the Study:  This is the first study to relate the sensitivity of the sampling methods to the within-flock prevalence.     

Assessment of bactericidal activity of disinfectants against Legionella on the biofilm model

Comparative assessment of bactericidal activity of different disinfectants against Legionella biofilms was conducted. Monospecies biofilms of 3 strains of Legionella pneumophila obtained on plastic plates in stable conditions were used as models. It has been shown that for degradation of biofilms as well as for prophylactic action of disinfectants in preventing formation of biofilms on plastic surfaces, higher concentrations of preparations were needed as compared to their bactericidal concentrations for culture of Legionella determined by method of serial dilutions.     

Effects of yeast probiotic formulation on viability, revival and protection against infection with Salmonella enterica ssp. enterica serovar Typhimurium in mice

Aims:  To compare the effects of five yeast probiotic formulations on viability, revival and washout kinetic in the digestive tract of mice, and the protection against an experimental infection with Salmonella enterica serovar Typhimurium.
Methods and Results:  The number of viable cells in five commercial probiotic products codified as A, B, C and D ( Saccharomyces boulardii – lyophilized) and E ( Saccharomyces cerevisiae – aqueous suspension) was determined, as well as revival and washout kinetic in mouse intestine. Protective capacity was evaluated by survival rate and histopathology of liver and intestine of mice treated with each product and then challenged with Salm . Typhimurium.
Conclusions:  Product A contained the highest number of viable cells and, fed to mice, gave the highest counts of viable yeasts and the longest persistence in faeces. Probably as a consequence, the highest survival and protection of intestinal and hepatic tissues were observed when product A was used for mouse treatment. Product E showed low counts in the formulation and was not recovered from mouse intestine.
Significance and Impact of the Study:  Formulation (lyophilization or aqueous suspension) is an important factor for revival and survival of a probiotic product in vivo and consequently for its protective properties.     

Conversion of volatile fatty acids into polyhydroxyalkanoate by Ralstonia eutropha

Aims:  The aims of this study were to optimize condensed corn solubles (CCS) as a medium for growth of Ralstonia eutropha and to determine the effects of individual volatile fatty acids (VFAs) on polyhydroxyalkanoate (PHA) production .
Methods and Results:  A CCS medium of concentration 240 g l⁻¹ with a carbon : nitrogen ratio of 50 : 1 was developed as the optimal medium. Cultures were grown in 1-l aerated flasks at 250 rev min⁻¹ at 30°C for 120 h. Comparable growth rates were observed in CCS vs a defined medium. At 48 h, VFAs were fed individually at different levels. Optimal levels of all the acids were determined to maximize PHA production. An overall comparison of the VFAs indicated that butyric and propionic acids provided the best results.
Conclusion:  An optimized CCS medium supported growth of R. eutropha . Butyric and propionic acids were the most efficient carbon sources to maximize PHA production when added at the 5 g l⁻¹ level.
Significance and Impact of the Study:  The study shows that a byproduct of ethanol industry can be effectively used as a low cost medium for PHA production, thus partly reducing the cost of commercialization of biopolymers.     

Bactericidal and sporicidal performance of a polymer-encapsulated chlorine dioxide-coated surface

Aims:  To investigate the physical characteristics and the bactericidal and sporicidal potential of a polymer-encapsulated ClO₂ coating.
Methods and Results:  An antimicrobial coating based on polymer-encapsulated ClO₂ was developed. A low viscosity, water/oil/water double emulsion coating was formulated for easy on-site application. Escherichia coli , Pseudomonas aeruginosa , Bacillus subtilis and Staphylococcus aureus were applied onto the coating to study the bactericidal capabilities of the coating. The bactericidal performance of the coating increased when the contact time with the tested bacteria increased. Over 99% of the E. coli , Ps. aeruginosa , B. subtilis were killed with a contact time of 30 min. Although endospores of B. subtilis are more resistant, about 75% of the spores were killed after 72 h on the coating. Moreover, a sustained release of gaseous ClO₂ was achieved to maintain about 90% removal of B. subtilis with a 10-min contact time during a 28-day study period. The coating also exhibits antiadhesive properties against bacteria.
Conclusions:  A polymer-encapsulated ClO₂ coating with sustained release of ClO₂ and promising bactericidal and sporicidal features was tested for 28 days.
Significance and Impact of the Study:  This study provides a new direction for developing polymer-encapsulated ClO₂ coatings that possess persistent bactericidal and sporicidal properties.