Recognition of oriT for DNA processing at termination of a round of conjugal transfer

Conjugal transfer of plasmid DNA is terminated when the transferred strand, linearized at the 38 base-pair origin of transfer (oriT), is recircularized. For the plasmid R1162, it is the protein MobA, covalently linked to the linear strand, that rejoins the ends by a reversible transesterification reaction. We have identified from those oligonucleotides with a partially degenerate oriT base sequence, subpopulations bound by MobA that undergo transesterification, and support efficient termination of conjugal transfer. Two domains of oriT, a ten base-pair inverted repeat and an adjacent TAA, are required for tight binding by the protein, whereas the location of the dinucleotide YG determines the site of strand cleavage. The results indicate that capture of MobA by oriT, and subsequent processing of the DNA for termination, are determined by different sequence motifs within this locus.     

Specific binding of MobA, a plasmid-encoded protein involved in the initiation and termination of conjugal DNA transfer, to single-stranded oriT DNA.

MobA protein, encoded by the broad host-range plasmid R1162, is required for conjugal mobilization of this plasmid. The protein is an essential part of the relaxosome, and is also necessary for the termination of strand transfer. In vitro, MobA is a nuclease specific for one of the two DNA strands of the origin of transfer (oriT). The protein can cleave this strand at the same site that is nicked in the relaxosome, and can also ligate the DNA. We show here that purified MobA protein forms a complex that is specific for this single oriT strand. The complex is unusually stable, with a half-life of approximately 95 min, is not disrupted by hybridization with the complementary strand, and reforms rapidly after boiling. Both the inverted repeat within oriT, and the eight bases between this repeat and the site cleaved by MobA, are required for binding by the protein. Mutations reducing base complementarity between the arms of the inverted repeat also decrease binding. This effect is partially suppressed by second-site mutations restoring complementarity. These results parallel the effects of these mutations on termination. Footprinting experiments with P1 nuclease indicate that the DNA between the inverted repeat and the nick site is protected by MobA, but that pairing between the arms of the repeat, which occurs in the absence of protein, is partially disrupted. Our results suggest that termination of strand transfer during conjugation involves tight binding of the MobA protein to the inverted repeat and adjacent oriT DNA. This complex positions the protein for ligation of the ends of the transferred strand, to reform a circular plasmid molecule.     

Initiation and termination of DNA transfer during conjugation of IncI1 plasmid R64: roles of two sets of inverted repeat sequences within oriT in termination of R64 transfer

Intercellular transfer of plasmid DNA during bacterial conjugation initiates and terminates at a specific origin of transfer, oriT. We have investigated the oriT structure of conjugative plasmid R64 with regard to the initiation and termination of DNA transfer. Using recombinant plasmids containing two tandemly repeated R64 oriT sequences with or without mutations, the subregions required for initiation and termination were determined by examining conjugation-mediated deletion between the repeated oriTs. The oriT subregion required for initiation was found to be identical to the 44-bp oriT core sequence consisting of two units, the conserved nick region sequence and the 17-bp repeat A sequence, that are recognized by R64 relaxosome proteins NikB and NikA, respectively. In contrast, the nick region sequence and two sets of inverted repeat sequences within the 92-bp minimal oriT sequence were required for efficient termination. Mutant repeat A sequences lacking NikA-binding ability were found to be sufficient for termination, suggesting that the inverted repeat structures are involved in the termination process. A duplication of the DNA segment between the repeated oriTs was also found after mobilization of the plasmid carrying initiation-deficient but termination-proficient oriT and initiation-proficient but termination-deficient oriT, suggesting that the 3' terminus of the transferred strand is elongated by rolling-circle-DNA synthesis.     

Localized denaturation of oriT DNA within relaxosomes of the broad-host-range plasmid R1162

The broad-host-range, multicopy plasmid R1162 is efficiently mobilized during conjugation by the self-transmissible plasmid R751. The relaxosome, a complex of plasmid DNA and R1162-encoded proteins, forms at the origin of transfer ( oriT ) and is required for mobilization. Transfer is initiated by strand- and site-specific nicking of the DNA within this structure. We show by probing with potassium permanganate that oriT DNA is locally melted within the relaxosome, in the region from the inverted repeat to the site that is nicked. Mutations in this region of oriT , and in genes encoding the protein components of the relaxosome, affect both nicking and melting of the DNA. The nicking protein in the relaxosome is MobA, which also ligates the transferred linear, single strand at the termination of a round of transfer. We propose that there is an underlying similarity in the substrates for these two MobA-dependent, DNA-processing reactions. We also show that MobA has an additional role in transfer, beyond the nicking and resealing of oriT DNA.     

Relaxed specificity of the R1162 nickase: a model for evolution of a system for conjugative mobilization of plasmids

The primary DNA processing protein for conjugative mobilization of the plasmid R1162 is the transesterase MobA, which acts at a unique site on the plasmid, the origin of transfer (oriT). Both MobA and oriT are members of a large family of related elements that are widely distributed among bacteria. Each oriT consists of a highly conserved core and an adjacent region that is required for binding by its cognate MobA. The sequence of the adjacent region is important in determining the specificity of the interaction between the Mob protein and the oriT DNA. However, the R1162 MobA is active on the oriT of pSC101, another naturally occurring plasmid. We show here that MobA can recognize oriTs having different sequences in the adjacent region and, with varying frequencies, can cleave these oriTs at the correct position within the core. Along with the structure of the oriTs themselves, these characteristics suggest a model for the evolution of this group of transfer systems.     

The relaxosome protein MobC promotes conjugal plasmid mobilization by extending DNA strand separation to the nick site at the origin of transfer

The frequency of conjugal mobilization of plasmid R1162 is decreased approximately 50-fold if donor cells lack MobC, one of the plasmid-encoded proteins making up the relaxosome at the origin of transfer ( oriT  ). The absence of MobC has several different effects on oriT DNA. Site- and strand-specific nicking by MobA protein is severely reduced, accounting for the lower frequency of mobilization. The localized DNA strand separation required for this nicking is less affected, but becomes more sensitive to the level of active DNA gyrase in the cell. In addition, strand separation is not efficiently extended through the region containing the nick site. These effects suggest a model in which MobC acts as a molecular wedge for the relaxosome-induced melting of oriT DNA. The effect of MobC on strand separation may be partially complemented by the helical distortion induced by supercoiling. However, MobC extends the melted region through the nick site, thus providing the single-stranded substrate required for cleavage by MobA.     

Localization of the nic site of IncN conjugative plasmid pCU1 through formation of a hybrid oriT.

The N-type oriT of plasmid pMUR274 was cloned on a 474-bp RsaI-SspI fragment, and the nucleotide sequence was determined. A comparison of the pMUR274 oriT sequence and the sequence of the oriTs of IncN plasmid pCU1 and IncW plasmid R388 demonstrated 57 and 28% identity, respectively. Intramolecular, site-specific recombination between the pCU1 oriT and the oriT of pMUR274 resulted in the formation of a hybrid oriT containing one half of each parental sequence. The junction point of the hybrid occurred within a 10-bp sequence, GCTATACACC, present in both parental sequences and represents the nic site of each oriT. Mutation of the first A or second T residue within the 10-bp junction sequence reduced transfer less than 20-fold, while mutation of either the second or third A residue reduced transfer over 1,000-fold. Site-specific recombination between a wild-type pCU1 oriT and these four mutant pCU1 oriTs demonstrated that nic lies between the second T and second A residues of the 10-bp junction sequence. Site-specific recombination between wild-type and mutant pCU1 oriTs also demonstrated that point mutations to the right of nic reduced both initiation and termination of transfer while point mutations to the left of nic reduced termination but had little or no effect on initiation. A 28-bp deletion within the AT-rich region 39 bases to the right of nic reduced both initiation and termination, while deletion of a 6-bp inverted repeat sequence at the right-most boundary of the minimal oriT region reduced initiation but not termination.     

MobA, the DNA strand transferase of plasmid R1162: the minimal domain required for DNA processing at the origin of transfer

MobA is a DNA strand transferase encoded by the plasmid R1162 and required for plasmid DNA processing during conjugal transfer. The smallest active fragment was identified using phage display and partial enzymatic digestion of the purified protein. This fragment, consisting of approximately the first 184 amino acids, is able to bind and cleave its normal DNA substrate, the origin of transfer (oriT). Smaller fragments having one of these activities were not obtained. An active intermediate consisting of MobA linked to DNA was isolated and used to show that a single molecule of MobA is sufficient to carry out all of the DNA processing steps during transfer. These results, along with those obtained earlier, point to a single large, active site in MobA that makes several different contacts along the oriT DNA strand.     

Recombination between directly repeated origins of conjugative transfer cloned in M13 bacteriophage DNA models ligation of the transferred plasmid strand.

When two, directly-repeated copies of the origin of transfer (oriT) of the conjugatively mobilizable, broad host-range plasmid R1162 are cloned into bacteriophage M13mp9 DNA, they undergo recombination in the presence of one of the R1162-encoded proteins required for mobilization [Meyer, R. (1989) J. Bacteriol., 171, 799-806]. Mutations in the outer arm of the inverted repeat within oriT inhibit this recombination. These mutations also affect a late step in transfer. We propose that recombination on the phage DNA models the processing of single-stranded DNA after entry into a recipient cell. The two, directly-repeated oriTs are not equivalent during the recombination reaction, because they are differently affected by the outer-arm mutations. A mutation was also isolated that reduces the specificity of the cleavage site in one of the two oriTs. Together, the results with the mutations suggest that phage recombinants can form only when the first cleavage occurs at one of the two oriTs. This is followed by the resulting free 3' end joining to the 5' end at the cleavage site of the other oriT.     

Characterizing the DNA contacts and cooperative binding of F plasmid TraM to its cognate sites at oriT

TraM is a DNA binding protein required for conjugative transfer of the self-transmissible IncF group of plasmids, including F, R1, and R100. F TraM binds to three sites in F oriT: two high affinity binding sites, sbmA and sbmB, which are direct repeats of nearly identical sequence involved in the autoregulation of the traM gene; and a lower affinity site, sbmC, an inverted repeat important for transfer, which is situated nearest to the nic site where transfer originates. TraM bound cooperatively to its binding sites at oriT; the presence of sbmA and sbmB increased the affinity for sbmC 10-fold. Bending of oriT DNA by TraM was minimal, suggesting that TraM, a tetramer, was able to loop the DNA when bound to sbmA and sbmB simultaneously. Hydroxyl radical footprinting of DNA of sbmA and sbmC revealed that TraM contacted the DNA within a region previously delineated by DNase I footprinting. TraM protected the CT bases within the sequence CTAG, which occurred at 12-base intervals on the top and bottom strand of sbmA, most consistently with other protected bases. The footprint on sbmC revealed that the predicted inverted repeats were protected by TraM with a pattern that began at the center of the repeats and radiated outward at 11-12 base intervals toward the 5'-ends of either strand. At high protein concentrations, this pattern extended beyond the footprint defined by DNase I, suggesting that the DNA was wrapped around the protein forming a nucleosome-like structure, which could aid in preparing the DNA for transfer.     

Origin and fate of the 3' ends of single-stranded DNA generated by conjugal transfer of plasmid r1162

During conjugation, a single strand of DNA is cleaved at the origin of transfer (oriT) by the plasmid-encoded relaxase. This strand is then unwound from its complement and transferred in the 5'-to-3' direction, with the 3' end likely extended by rolling-circle replication. The resulting, newly synthesized oriT must then be cleaved as well, prior to recircularization of the strand in the recipient. Evidence is presented here that the R1162 relaxase contains only a single nucleophile capable of cleaving at oriT, with another molecule therefore required to cleave at a second site. An assay functionally isolating this second cleavage shows that this reaction can take place in the donor cell. As a result, there is a flux of strands with free 3' ends into the recipient. These ends are susceptible to degradation by exonuclease I. The degree of susceptibility is affected by the presence of an uncleaved oriT within the strand. A model is presented where these internal oriTs bind and trap the relaxase molecule covalently bound to the 5' end of the incoming strand. Such a mechanism would result in the preferential degradation of transferred DNA that had not been properly cleaved in the donor.     

Investigating the basis of substrate recognition in the pC221 relaxosome

The nicking of the origin of transfer (oriT) is an essential initial step in the conjugative mobilization of plasmid DNA. In the case of staphylococcal plasmid pC221, nicking by the plasmid-specific MobA relaxase is facilitated by the DNA-binding accessory protein MobC; however, the role of MobC in this process is currently unknown. In this study, the site of MobC binding was determined by DNase I footprinting. MobC interacts with oriT DNA at two directly repeated 9 bp sequences, mcb1 and mcb2, upstream of the oriT nic site, and additionally at a third, degenerate repeat within the mobC gene, mcb3. The binding activity of the conserved sequences was confirmed indirectly by competitive electrophoretic mobility shift assays and directly by Surface Plasmon Resonance studies. Mutation at mcb2 abolished detectable nicking activity, suggesting that binding of this site by MobC is a prerequisite for nicking by MobA. Sequential site-directed mutagenesis of each binding site in pC221 has demonstrated that all three are required for mobilization. The MobA relaxase, while unable to bind to oriT DNA alone, was found to associate with a MobC-oriT complex and alter the MobC binding profile in a region between mcb2 and the nic site. Mutagenesis of oriT in this region defines a 7 bp sequence, sra, which was essential for nicking by MobA. Exchange of four divergent bases between the sra of pC221 and the related plasmid pC223 was sufficient to swap their substrate identity in a MobA-specific nicking assay. Based on these observations we propose a model of layered specificity in the assembly of pC221-family relaxosomes, whereby a common MobC:mcb complex presents the oriT substrate, which is then nicked only by the cognate MobA.     

Stringent and relaxed recognition of oriT by related systems for plasmid mobilization: implications for horizontal gene transfer

The plasmids R1162 and pSC101 have origins of conjugative transfer (oriTs) and corresponding relaxases that are closely related. The oriTs are made up of a highly conserved core, where DNA is cleaved by the relaxase prior to transfer, and an inverted repeat that differs in size and sequence. We show that in each case the seven base pairs adjacent to the core and within one arm of the inverted repeat are sufficient to determine specificity. Within this DNA there are three AT base pairs located 4 bp from the core. Mutations in the AT base pairs suggest that the relaxase makes essential contacts at these locations to the minor groove of the DNA. The remaining four bases are different for each oriT and are both necessary and sufficient for stringent recognition of oriT by the pSC101 mobilization proteins. In contrast, the R1162 mobilization proteins have a much more relaxed requirement for the base sequence of this specificity region. As a result, the R1162 mobilization proteins can initiate transfer from a variety of sites, including those derived from the chromosome. The R1162 mobilization proteins could therefore contribute to the horizontal gene transfer of DNA from diverse sources.     

Mutational analysis of the R64 oriT region: requirement for precise location of the NikA-binding sequence.

Conjugative DNA transfer of IncI1 plasmid R64 is initiated by the introduction of a site- and strand-specific nick into the origin of transfer (oriT). In R64 oriT, 17-bp (repeat A and B) and 8-bp inverted-repeat sequences with mismatches are located 8 bp away from the nick site. The nicking is mediated by R64 NikA and NikB proteins. To analyze the functional organization of the R64 oriT region, various deletion, insertion, and substitution mutations were introduced into a 92-bp minimal R64 oriT sequence and their effects on oriT function were investigated. This detailed analysis confirms our previous prediction that the R64 oriT region consists of an oriT core sequence and additional sequences necessary for full oriT activity. The oriT core sequence consists of the repeat A sequence, which is recognized by R64 NikA protein, and the nick region sequence, which is conserved among various origins of transfer and is most probably recognized by NikB protein. The oriT core sequence is sufficient for NikAB-mediated oriT-specific nicking. Furthermore, it was shown that the repeat A sequence is essential for localization to a precise position relative to the nick site for oriT function. This seems to be required for the formation of a functional ternary complex consisting of NikA and NikB proteins and oriT DNA. The repeat B sequence and 8-bp inverted repeat sequences are suggested to be required for the termination of DNA transfer.     

Reconstitution of a staphylococcal plasmid-protein relaxation complex in vitro

The isolation of plasmid-protein relaxation complexes from bacteria is indicative of the plasmid nicking-closing equilibrium in vivo that serves to ready the plasmids for conjugal transfer. In pC221 and pC223, the components required for in vivo site- and strand-specific nicking at oriT are MobC and MobA. In order to investigate the minimal requirements for nicking in the absence of host-encoded factors, the reactions were reconstituted in vitro. Purified MobA and MobC, in the presence of Mg2+ or Mn2+, were found to nick at oriT with a concomitant phosphorylation-resistant modification at the 5' end of nic. The position of nic is consistent with that determined in vivo. MobA, MobC, and Mg2+ or Mn2+ therefore represent the minimal requirements for nicking activity. Cross-complementation analyses showed that the MobC proteins possess binding specificity for oriT DNA of either plasmid and are able to complement each other in the nicking reaction. Conversely, nicking by the MobA proteins is plasmid specific. This suggests the MobA proteins may encode the nicking specificity determinant.     

MobB protein stimulates nicking at the R1162 origin of transfer by increasing the proportion of complexed plasmid DNA.

An essential early step in conjugal mobilization of R1162, nicking of the DNA strand that is subsequently transferred, is carried out in the relaxosome, a complex of two plasmid-encoded proteins and DNA at the origin of transfer (oriT). A third protein, MobB, is also required for efficient mobilization. We show that in the cell this protein increases the proportion of molecules specifically nicked at oriT, resulting in lower yields of covalently closed molecules after alkaline extraction. These nicked molecules largely remain supercoiled, with unwinding presumably constrained by the relaxosome. MobB enhances the sensitivity of the oriT DNA to oxidation by permanganate, indicating that the protein acts by increasing the fraction of complexed molecules. Mutations that significantly reduce the amount of complexed DNA in the cell were isolated. However, plasmids with these mutations were mobilized at nearly the normal frequency, were nicked at a commensurate level, and still required MobB. Our results indicate that the frequency of transfer is determined both by the amount of time each molecule is in the nicked form and by the proportion of complexed molecules in the total population.     

A dual functional origin of transfer in the ICEclc genomic island of Pseudomonas knackmussii B13

Genomic islands (GEIs) are large DNA segments, present in most bacterial genomes, that are most likely acquired via horizontal gene transfer. Here, we study the self-transfer system of the integrative and conjugative element ICEclc of Pseudomonas knackmussii B13, which stands model for a larger group of ICE/GEI with syntenic core gene organization. Functional screening revealed that unlike conjugative plasmids and other ICEs ICEclc carries two separate origins of transfer, with different sequence context but containing a similar repeat motif. Conjugation experiments with GFP-labelled ICEclc variants showed that both oriTs are used for transfer and with indistinguishable efficiencies, but that having two oriTs results in an estimated fourfold increase of ICEclc transfer rates in a population compared with having a single oriT. A gene for a relaxase essential for ICEclc transfer was also identified, but in vivo strand exchange assays suggested that the relaxase processes both oriTs in a different manner. This unique dual origin of transfer system might have provided an evolutionary advantage for distribution of ICE, a hypothesis that is supported by the fact that both oriT regions are conserved in several GEIs related to ICEclc.