Serendipitous syntheses of Rh(H)2Cl(PRPh2)3 complexes, and their crystal structures, where R = Me, Cy (cyclohexyl)

Reactions of RhCl(cod)(THP) (cod = 1,5-cyclooctadiene; THP = P(CH₂OH)₃) with PMePh₂ or PCyPh₂ (Cy = cyclohexyl) in acetone/MeOH solution under H₂ surprisingly form the complexes cis, mer-Rh(H)₂Cl(PRPh₂)₃ (R = Me or Cy); both complexes are characterized by crystallography (the first structures in which the hydride ligands of such dihydrido-chloro-trisphosphine complexes have been located), and by detailed ¹H and ³¹P NMR spectroscopy. The key role of the THP in the observed chemistry is discussed.     

Stereoselective Epoxidation of 4-Bromo-1-Butene and 3-Butene-1-Ol with Three Alkene-Utilizing Bacteria

Stereoselective epoxidation of 4-bromo-1-butene and 3-butene-1-ol was carried out with three alkene-utilizing bacteria: Mycobacterium LI, Mycobacterium E3 and Nocardia IP1. The enantiomeric compositions of 4-bromo-1,2-epoxybutane and 4-hydroxy-1,2-epoxybutane were determined by optical rotation and checked by ¹H NMR using a chiral shift reagent and by ¹⁹F NMR after reaction with the Mosher reagent. The presence of a bromine atom or a hydroxyl group induced some variations in the stereochemical course of the microbial epoxidation. The epoxides were produced predominantly in the 2R-form but their enantiomeric composition depended on both the microorganism used and on the substrate studied.     

Synthesis and characterization of organomolybdenum and organotungsten halides containing the η-pentabenzylcyyclopentadienyl ligand η-Bz5C5M(CO)3X (M = Mo, W; X = Cl, Br, I). The X-ray molecular structure of η-Bz5C5Mo(CO)3I

An improved synthetic procedure for pentabenzylcyclopentadiene Bz₅C₅H was developed. Six new organomolybdenum and organotungsten halides η⁵-Bz₅C₅M(CO)₃X(M = Mo, W; X = Cl, Br, I) were syntesized through the reaction of η⁵-Bz₅C₅M(CO)₃Li (derived from Bz₅C₅H, n-BuLi and M(CO)₆) with PCl₃, PBr₃ or I₂ and characterized by elemental analysis, IR and ¹H NMR spectroscopy. The structure of η⁵-Bz₅C₅Mo(CO)₃I was determined by single-crystal X-ray diffraction techniques. It crystallized in the monoclinic space groupp P2/c with cell parameters a = 13.294(4), B = 15.147(4), C = 19.027(3) Å, β = 108.32(2)°, V = 3637(2) ų, Z = 4 and D_x = 1.50 g cm⁻³. The final R value was 0.035 for 4564 observed reflections.     

Infraspecific chemical variability of the leaf essential oil of Juniperus phoenicea var. turbinata from Portugal

The essential oil composition of 68 individual plants of Juniperus phoenicea from Portugal was investigated by GC, GC-MS and ¹³C NMR. -Pinene, β-phellandrene, -terpinyl acetate and myrcene were found to be the main constituents. Botanical and chemical data as well as phytogeographical distribution indicate J. phoenicea var. turbinata as the unique subspecies occurring in Portugal. Nevertheless, this taxon exhibits chemical polymorphism. The results of the oil compositions were processed by hierarchical clustering and principal component analysis allowing to establish three groups of essential oils differentiated by the content of -pinene, β-phellandrene and -terpinyl acetate.     

Characterisation of thermally modified hard- and softwoods by C CPMAS NMR

The changes induced by thermal modification in the chemical structure of spruce [Picea abies (L.) Karst.], birch (Betula pendula), aspen (Populus tremula) and oak (Quercus robur) were studied by ¹³C CPMAS NMR spectroscopy. Spruce, birch and aspen were thermally modified at 195 °C and oak at 160 °C, under steam, according to an industrial-scale heat treatment process. In both hard- and softwood samples, ¹³C CPMAS NMR measurements revealed a degradation of less ordered carbohydrates (i.e. hemicelluloses and amorphous cellulose) in the thermally modified wood, which resulted in an increase in the cellulose crystallinity. Furthermore, thermal modification induced changes in the lignin structure by a cleavage of the β-O-4 linkages. In the softwood lignin, a decrease also occurred in the methoxyl group content leading to a more condensed lignin structure.     

Response time and electrorheology of semidiluted gellan, xanthan and cellulose suspensions

Response times with electrical fields of gellan and xanthan dry powder suspensions of 25, 32 and 53 μm average diameter and concentrations of 1.0, 1.5 and 2.0% (w/w) dispersed in commercial corn oil were optically measured through a specifically designed set up. In all cases, the delay time was proportional to 1/E^a, where E is the applied field and a is an adjustable parameter. The values of parameter a were very different from the typical value of some known electrorheolgical fluids. Response time of gellan suspensions was shorter than the one obtained for xanthan and it is comparable to the time found by using silica particles in silicon oil. Response times for cellulose were very large and the fibrillation phenomenon was negligible for E<1.0 kv/mm.

Viscosity measurements of semidiluted xanthan, gellan and cellulose suspensions (1.0 and 1.5% w/w) under the influence of electrical fields, were performed in a parallel plates rheometer. Results in the range of stress <70 Pa showed that viscosity values of gellan suspensions were larger than those obtained with xanthan or cellulose under the same applied electric field at shear rates higher than 10 s⁻¹. However, cellulose suspensions showed larger viscosity values compared with the ones measured with xanthan and gellan suspensions at very low shear rates. Dielectric measurements of cellulose, xanthan and gellan 1.5% w/w suspensions were performed in the range 10⁰–8×10⁴ Hz. Results agree with a Maxwell–Wagner type relaxation model.     

Effects of environmental factors, age and genotype on sperm production and semen quality in Bos indicus and Bos taurus AI bulls in Brazil

The effects of ambient temperature and humidity, month, age and genotype on sperm production and semen quality in AI bulls in Brazil were evaluated. Data from two consecutive years were analyzed separately. Seven Bos indicus and 11 Bos taurus bulls from one artificial insemination (AI) center were evaluated in Year 1 and 24 B. indicus and 16 B. taurus bulls from three AI centers were evaluated in Year 2. Ambient temperature and humidity did not significantly affect sperm production and semen quality, probably because there was little variation in these variables. Month accounted for less than 2% of the variation in sperm production and semen quality. Increased bull age was associated with decreased sperm motility (P<0.10) and increased minor sperm defects (P<0.001) in Year 1. B. indicus bulls had greater (P<0.005) sperm concentration than B. taurus bulls in both years (1.7×10⁹/ml versus 1.2×10⁹/ml in Year 1 and 1.6×10⁹/ml versus 1.2×10⁹/ml in Year 2, respectively). Ejaculate volume was not significantly affected by genotype in Year 1 (6.6 ml versus 6.9 ml in B. indicus and B. taurus bulls, respectively), but B. indicus bulls had greater (P<0.05) total (11.4×10⁹ versus 8.2×10⁹) and viable (6.7×10⁹ versus 4.9×10⁹) numbers of spermatozoa in the ejaculate than B. taurus bulls. In Year 2, B. taurus bulls had greater (P<0.05) ejaculate volume than B. indicus bulls (8.2 ml versus 6.7 ml, respectively) and total and viable number of spermatozoa in the ejaculate were not significantly different between genotypes (10.3×10⁹ versus 9.1×10⁹ and 6.1×10⁹ versus 5.4×10⁹ in B. indicus and B. taurus bulls, respectively). Sperm motility was not significantly affected by genotype (mean, 59%). In Year 1, B. indicus bulls tended (P<0.10) to have more major sperm defects and had more (P<0.05) total sperm defects than B. taurus bulls (11.8% versus 8.7% and 13.6% versus 10.0%, respectively). In Year 2, B. indicus bulls tended (P<0.10) to have more total sperm defects than B. taurus bulls (16.2% versus 13.3%, respectively). In conclusion, neither ambient temperature and humidity nor month (season) significantly affected sperm production and semen quality. B. indicus bulls had significantly greater sperm concentration and B. taurus bulls had significantly fewer morphologically defective spermatozoa.     

Molecular structures and some properties of tris(2-aminoethyl) amine cobalt(III) complexes with thiocarboxylato-O,S such as 3-mercaptopropionato, 2-mercaptoacetato and their derivatives

Cobalt(III) complexes with a thiolate or thioether ligand, t-[Co(mp)(tren)]⁺ (2), t-[Co(mtp)(tren)]²⁺ (1Me) and t-[Co(mta)(tren)]²⁺ (2Me), (mp = 3-mercaptopropionate, MA = 3-(methylthio)propionate and MTA = 2-(methylthio)acetate) have been prepared in aqueous solutions. The crystal structures of 1, 2, 1Me and 2Me were determined by X-ray diffraction methods. The crystal data are as follows, t-[Co(mp)(tren)]ClO₄ (1CIO₄): monoclinic, P2₁/n, A = 10.877(8), B = 11.570(4), c = 12.173(7) Å, β = 92.20(5)°, V = 1531(1) ų, Z = 4 and R = 0.060; t-[Co(ma)(tren)]Cl·3H₂O (2Cl·3H₂O): monoclinic, P2₁/n, a = 7.7688(8), B = 27.128(2), C = 7.858(1) Å, β = 100.63(1)°, V = 1627.7(3) ų, Z = 4 and R = 0.066; (+)₄₆₅^CD-t-[Co(mtp)(tren)](ClO₄)₂ ((+)₄₆₅^CD-1Me(ClO₄)₂): orthorhombic, P2₁2₁2₁, A = 10.6610(7), B = 11.746(1), C = 15.555(1) Å, V = 1947.9(3) ų, Z = 4 and R = 0.068; (+)₄₆₅^CD-t-[Co(mta)(tren)](ClO₄)₂ ((+)₄₆₅^CD-2Me(ClO₄)₂): orthorhombic, P2₁2₁2₁, a = 10.564(1), B = 11.375(1), C = 15.434(2) Å, V = 1854.7(4) ų, Z = 4 and R = 0.047. All central Co(III) atoms have approximately octahedral geometry, coordinated by four N, one O, and one S atoms. All of the complexes are only isomer, of which the sulfur atom in the didentate-O,S ligands are located at the trans position to the tertiary amine nitrogen atom of tren. 1 and 1Me contain six-membered chelate ring, and 2 and 2Me do five-membered chelate ring in the didentate ligand. The chirality of the asymmetric sulfur donor atom in (+)₄₆₅^CD-1Me is the S configuration and that in (+)₄₆₅^CD-2Me is the R one. The ¹H NMR, ¹³C NMR and electronic absorption spectral behaviors and electrochemical properties of the present complexes are discussed in relation to their stereochemistries.     

Studies on the reactivity of organometallic Ru-, Rh- and Os-pta complexes with DNA model compounds

The reactions of arene–metal complexes (arene = p-cymene, benzene or pentamethylcyclopentadienyl, metal = Ru, Rh or Os), including 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1]decanephosphine (pta) and chloro co-ligands, with 9-methylguanine, adenine, and a series of nucleosides were studied in water to ascertain the binding modes. The products were characterized by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Tandem mass spectrometry was found to provide excellent information on preferential binding sites. In general, the N7 position on guanine (the most basic site) was found to be the preferred donor atom for coordination to the metal complexes. The X-ray structures of the precursor complexes, [(η⁵-C₁₀H₁₅)RhCl(pta-Me)₂]Cl₂, [(η⁶-C₁₀H₁₄)OsCl(pta)₂]Cl, and [(η⁶-C₆H₆)OsCl₂(CH₃CN)], are also reported.     

Synthesis, GC selective DNA binding and topoisomerase II inhibition activities of ruthenium(II) polypyridyl complex containing 11-aminopteridino[6,7-f][1,10]phenanthrolin-13(12H)-one

A DNA-intercalating Ru(II) polypyridyl complex [Ru(bpy)₂(appo)]²⁺ (bpy = 2,2′-bipyridine, appo = 11-aminopteridino[6,7-f][1,10]phenanthrolin-13(12H)-one) has been synthesized and characterized by elemental analysis, electrospray mass spectra, ¹H NMR, UV/Vis spectrum, fluorescent spectrum and electrochemistry. The DNA-binding, photocleavage, and topoisomerase inhibition of the complex was studied. Interestingly, the complex binds to DNA via an intercalative mode with preference for GC sequences and cleaves the pBR322 DNA upon irradiation. In addition, the complex shows high inhibition activity against topoisomerase II by interfere the DNA religation.     

Enhancement of growth and gymnodimine production by the marine dinoflagellate, Karenia selliformis

Because of its novel bioactive properties the production of gymnodimine for use as a pharmaceutical precursor has aroused interest. The dinoflagellate, Karenia selliformis produces gymnodimine when grown in bulk culture using GP + selenium medium but the growth rates (μ) and levels of gymnodimine are low (μ, 0.05 days⁻¹; gymnodimine 250 μg L⁻¹ max). We describe the effects of organic acid additions (acetate, glycolate, alanine and glutamate additions and combinations of these) in enhancing growth and gymnodimine production in axenic cultures. The most effective organic acid combinations in decreasing order were: glycolate/alanine > acetate > glycolate. Glycolate/alanine optimised gymnodimine production by prolonging growth (maximum cell yield, 1.76 × 10⁵ cells mL⁻¹; gymnodimine, 1260 μg L⁻¹; growth rate (μ), 0.2 days⁻¹) compared to the control (growth maximum cell yield, 7.8 × 10⁴ cells mL⁻¹; gymnodimine, 780 μg L⁻¹; μ, 0.17 days⁻¹). Acetate enhanced gymnodimine by stimulating growth rate (μ, 0.23 days⁻¹) and the large concentration of gymnodimine per cell (16 pg cell⁻¹ cf. 9.8 pg cell⁻¹ for the control) suggests a role for this compound in gymnodimine biosynthesis. Amending culture media with Mn²⁺ additions resulted in slightly decreased growth in control cultures and increased the gymnodimine while in glycolate/alanine cultures growth was stimulated but gymnodimine production decreased. The results suggest that the organic acid can enhance gymnodimine production by either enhancing growth maximum or the biosynthetic pathway.     

Synthesis, radiolabeling and receptor binding of [3H][(1S,2R)ACPC2]endomorphin-2

Previously, we have shown that substitution of Pro² for cis-2-aminocyclopentanecarboxylic acid, ACPC in endomorphin-2 results in an analogue with greatly augmented proteolytic stability, high μ-opioid receptor affinity and selectivity. We now report the synthesis and biochemical characterization of [³H][(1S,2R)ACPC²]endomorphin-2 with a specific activity of 1.41 TBq/mmol (38.17 Ci/mmol). Specific binding of [³H][(1S,2R)ACPC²]endomorphin-2 was saturable and of high affinity with an equilibrium dissociation constant, K_d = 1.80 ± 0.21 nM and receptor density, B_max = 345 ± 27 fmol × mg protein⁻¹ at 25 °C in rat brain membranes. Similar affinity values were obtained in kinetic and displacement assays. Both Na⁺ and Gpp(NH)p decreased the affinity proving the agonist character of the radioligand. [³H][(1S,2R)ACPC²]endomorphin-2 retained the μ-specificity of the parent peptide. The new radioligand will be a useful tool to map the topographical requirements of μ-opioid peptide binding due to its high affinity, selectivity and enzymatic stability.     

Contribution of the heme propionate groups to the electron transfer and electrostatic properties of myoglobin

The role of the heme propionate groups in determining the electron transfer and electrostatic properties of myoglobin have been studied by thermodynamic, kinetic, and spectroscopic studies of horse heart myoglobin in which the heme propionate groups are esterified. Spectroelectrochemical analysis has established that the E_m,7 of dimethylester heme-substituted Mb (DME-Mb) (E_m,7 = 100.2(2) mV vs. NHE (Normal Hydrogen Electrode) (25 °C) is increased  40 mV relative to that of the native protein with ΔH° = −12.9(2) kcal/mol and ΔS° = −51.0(8) cal/mol/deg (pH 7.0, μ = 0.1 M (phosphate)). The second order rate constant for reduction of DME-metMb by Fe(EDTA)²⁻ is increased  > 400-fold relative to that for reduction of native metMb to a value of 1.34(2) × 10³ M⁻¹ s⁻¹ with ΔS^‡ = −13(1) cal/mol/deg and ΔH^‡ = 9.2(3) (pH 7.0, μ = 0.1 M (phosphate)). Analysis of the pH dependences of the reduction potential and rate constant for reduction by Fe(EDTA)²⁻ demonstrates that heme propionate esterification introduces significant changes into the electrostatic interactions in myoglobin. These changes are also manifested by differences in the pH dependences of the ¹H NMR spectra of native and DME-metMb that reveal shifts in pK_a values for specific His residues as the result of heme propionate esterification. In sum, the current results establish that heme propionate esterification not only affects the electron transfer properties of myoglobin but also influences the titration behavior of specific His residues.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Isolation and characterization of soluble sulfated polysaccharide from the red seaweed Gracilaria cornea

The composition, structure and rheological properties of a soluble sulfated polysaccharide from Gracilaria cornea (Brazilian red marine alga) were investigated. Agarocolloid yield, intrinsic viscosity, monosaccharide composition, sulfate and cation content as well as molecular weight were determined. The main polysaccharide components were 3,6-anhydrogalactose (24.7%) and galactose (64.6%). In addition, minor components such as 6-O-methyl-galactose (8.5%), glucose (1.5%), xylose (0.7%) and sulfated groups (4.8%) were detected. Comparison between sulfate contents determined by Fourier transform IR (FT-IR) spectroscopy and microelemental analysis was made. Data from ¹³C NMR and FT-IR provided evidence of sulfation in C-4 and C-6 of galactose. Sodium, calcium, magnesium and potassium cations were detected in the agarocolloid. The intrinsic viscosities were lower than typical values for agar in the same experimental conditions. No gelation in 1.5, 2.0 and 3.0% (w/v) aqueous solution was observed, even by cooling up to 4 °C. Gel permeation chromatography indicated two major polysaccharide fractions of M_pk 7.4×10⁴ and 1.8×10⁴ g/mol and a minor fraction of M_pk 2.1×10⁶ g/mol, probably a protein–polysaccharide complex.     

Kinetics of laccase-catalysed TEMPO oxidation

The oxidation of TEMPO (2,2,6,6-tetramethyl-piperidine-1-oxyl radical) has been studied in the presence of recombinant laccases (benzenediol:oxygen oxidoreductase, EC 1.10.3.2) from Polyporus pinsitus (rPpL), Myceliophthora thermophila (rMtL), Coprinus cinereus (rCcL) and Rhizoctonia solani (rRsL) in buffer solution pH 4.5–7.3 and at 25 °C. At pH 5.5 the oxidation constant calculated from the initial rate of TEMPO oxidation was 1.7 × 10⁴, 1.4 × 10³, 7.8 × 10² and 5.2 × 10² M⁻¹ s⁻¹ for rPpL, rRsL, rCcL and rMtL, respectively. The maximal activity of rPpL-catalysed TEMPO oxidation was at pH 5.0. The pK_a obtained in neutral pH range was 6.2. The reactivity of laccases is in a good agreement with laccases copper type I redox potential.

TEMPO oxidation rate increased 541 times in the presence of 10-(3-propylsulfonate) phenoxazine (PSPX). The model of synergistic TEMPO and PSPX oxidation was proposed. Experimentally obtained rate constants for rPpL-catalysed PSPX oxidation were in a good agreement with those calculated from the synergistic model, therefore confirming the feasibility of the model. The acceleration of TEMPO oxidation with high reactive laccase substrates opens new possibilities for TEMPO application as a mediator.     

Structural determinations, magnetic and EPR studies of complexes involving the Cr(OH)2Cr unit

Five heterometallic compounds with formulae [Ba(H₂O)₄Cr₂(μ-OH)₂(nta)₂] · 3H₂O (I), [M(bpy)₂(H₂O)₂] [Cr₂(OH)₂(nta)₂] · 7H₂O, where M²⁺ = Zn, (II); Ni, (III); Co, (IV) and [Mn(H₂O)₃(bpy)Cr₂(OH)₂(nta)₂] · (bpy) · 5H₂O (V); bpy = 2,2′-bipyridine, (nta = nitrilotriacetate ion) have been prepared by reaction of I with the corresponding M^II-sulfates in the presence of 2,2′-bipyridine. Substances I–V have been characterized by magnetic susceptibility measurements, EPR and X-ray determinations. I represents a 2D coordination polymer formed by coordination of centrosymmetrical dimeric chromium(III) units and Barium cations. The 10-coordinate Ba polyhedron is completed by four water molecules. Compounds II–IV are isostructural and consist of non-centrosymmetric dimeric anions [Cr₂(μ-OH)₂(nta)₂]²⁻, complex cations [M^II(bpy)₂(H₂O)₂]²⁺ and solvate water molecules. The octahedral coordination of chromium atoms implies four donor atoms of the nta³⁻ ligands and two bridging OH groups. Multiple hydrogen bonds of coordinated and solvate water molecules link anions and cations in a 3D network. A similar [Cr₂(μ-OH)₂(nta)₂]²⁻ unit is found in V. The bridging function is performed by a carboxylate oxygen atom of the nta ligand that leads to the formation of a trinuclear complex [Mn(bpy)(H₂O)₂Cr₂(μ-OH)₂(nta)₂]. Experimental and calculated frequency and temperature dependences of EPR spectra of these compounds are presented. The fine structure appearing on the EPR spectra of compound V is analyzed in detail at different temperatures. It is established that the main part of the EPR signals is due to the transitions in the spin states of a spin multiplet with S = 2. Analyses of experimental and calculated spectra confirm the absence of interaction between metal ions (M^II) and Cr-dimers in complexes III and IV and the presence of weak Mn–Cr interactions in V. The temperature dependence of magnetic susceptibilities for I–V was fitted on the basis of the expression derived from isotropic Hamiltonian including a bi-quadratic exchange term.     

Effect of temperature and pH on 31P nuclear magnetic resonances of phospholipids in cholate micelles

Accurate and precise determination of phospholipid composition by ³¹P NMR spectroscopy requires correct assignments and adequate spectral resolution. Because temperature and pH may affect chemical shifts (δ), our first aim was to establish the temperature coefficient (Δδ/ΔT) of common phospholipid classes when using sodium cholate as detergent. This parameter can then be used to aid in resonance assignments. The second goal was to investigate the pH dependence of δ so that, in addition to temperature, pH control can be used to minimize spectral overlap. For phosphatidylcholine, sphingomyelin, dihydrosphingomyelin and phosphatidylglycerol, δ values were invariant with pH and temperature. Whereas the Δδ/ΔT for phosphatidylinositol was 4 × 10⁻³ ppm/°C, regardless of pH, these coefficients were highly pH-dependent for phosphatidic acid, phosphatidylethanolamine and phosphatidylserine, exhibiting maximal variations with the deprotonation of the headgroup, particularly for phosphatidic acid. These trends indicate the importance of H-bonding on δ and Δδ/ΔT for phospholipid resonances.     

Rhodium(I) complexes of the type [TpRh(LL)] (LL = 2 CO, NBD, COD) with trifluoromethyl substituted tris (pyrazolyl) borate ligands and their dynamic behaviour in solution. The X-ray crystal structure of TpRh(CO)2

Three seriesof Rh(I) complexes of the type Tp^3R,5RRh(LL), with LL = 2 CO (1), norbornadiene (NBD) (2) and 1,5-cyclooctadiene (COD) (3) and the tris (pyrazolyl)borate (Tp) ligands 3R=5R=Me (a), 3R=CF₃5R=Me (b); and 3R=5R=CF₃ (c) were synthesized and fully characterized by IR and multinuclear NMR spectroscopy. Three isomeric forms were identified in solutions of these complexes: two square-planar isomers with a κ²-Tp³R,5R ligand, the uncoordinated pyrazolyl ring occupying either an equatorial position (type A), or an axial position (type B), and a five-coordinate species with a κ³, Tp³R,5R ligand (type C). In the carbonyl complexes 1 the dynamic equilibria between these isomers are solvent dependent. Interestingly, solutions of complex 1c contained all three isomers simultaneously. ¹⁰³Rh and ¹³C NMR spectral studies indicate that the NBD compounds, 2, preferentially form square-planar complexes when Tp^CF₃,Me and Tp^CF₃,CF₃ are present, while for the COD complexes, 3, square-planar complexes are preferred for all three Tp-type ligands. The X-ray structure of Tp^CF₃,MeRh(CO)₂ (1b) was determined (spacce group C2/ c,a = 21.271(9), B = 11.004(3), C = 21.563(9) Å, β = 114.93(3)°, V=4577(3) ų, Z = 8, R = 3.41, R_w = 4.70). Its structure is of type B, with the third pyrazolyl ring axially placed, the N(4) being almost directly above the Rh atom but exerting only a weak Rh-N interaction.