Microcycle conidiation inPenicillium italicum

Penicillium italicum readily conidiates in submerged (shaken) culture in a common carbohydrate-mineral salts medium. At 25°C formation of penicilli is completed within 40 h after inoculation of the nutrient medium with conidia. In medium of proper composition all conidia undergo a true microcycle conidiation, i.e., conidiogenesis immediately follows germination without substantial mycelial growth. The pH of the medium has an overriding effect on conidiation, giving the possibility to synchronize the whole process.     

Microcycle conidiation — A review

Microcycle conidiation is defined as the germination of spores by the direct formation of conidia without the intervention of mycelial growth, as occurs in most normal life cycles. It is a method of asexual spore formation in which the normal life cycle of the fungus is bypassed. Spores formed through sexual reproduction and species with unicellular thalli are not included in microcycle conidiation. The term secondary conidium or secondary spore is usually, but not always, synonymous with microcycle conidiation. In the laboratory various factors, but especially temperature, can induce the microcycle condition in such fungi asAspergillus niger, Penicillium andNeurospora crassa, providing a useful tool for research. Microcycle conidiation has also been reported in a broad range of species in nature, and comprises a normal part of the life cycle in several groups, including the Entomophthorales, Taphrinales, Clavicipitales, Uredinales, Ustilaginales, Tremellales and Exobasidiales. The presence of a microcycle in such fungi undoubtedly provides a survival mechanisn for spores that encounter unfavorable conditions.     

Microcycle sporogenesis in some streptomycetes without shift down treatment

Conditions for microcycle sporogenesis in two streptomycete strains without shifting the culture were found. The sporulation in Streptomyces granaticolor took place after 24 h of cultivation. The dry mass was increasing till 32 h probably due to production of a hydrophobic substance resembling fibrous sheath of aerial hyphae and spores. Ultrathin section of microcycle spores are presented.     

Microcycle Sporogenesis of Bacillus cereus in a Chemically Defined Medium

A chemically defined medium which allowed germination, outgrowth, and subsequent resporulation of Bacillus cereus T spores, without intervening cell division (microcycle sporogenesis), is described. No medium replacement was required. The second-stage spores were heat-stable and had similar germination characteristics and dipicolinic acid content to primary spores. Deoxyribonucleic acid (DNA) replication began soon after germination and there was a doubling in the DNA content of the cells within 2 hr.     

Fine Structure of Bacillus megaterium during Microcycle Sporogenesis

Ultrathin sections were prepared from cultures of Bacillus megaterium QM B1551 undergoing microcycle sporogenesis (initial spore to primary cell to second-stage spore without intervening cell division) on a chemically defined medium. The cytoplasmic core of the dormant spore was surrounded by plasma membrane, cell-wall primordium, cortex, outer cortical layer, and spore coats. Early in the cycle, the coat opened at the germinal groove, the cortex swelled, ribosomes and a chromatinic area associated with large mesosomes (which may later be incorporated into the expanding plasma membrane) appeared in the core, and the cell wall became defined at the site of the cell wall primordium. Poly-β-hydroxybutyrate granules began to appear in the primary cell at about 3 hr. By 7 hr, the forespore of the second-stage spore was delineated by typical double membranes. Between 7 and 12 hr, second-stage cell-wall primordium and cortex developed between the separating forespore membranes. The inner membrane became the plasma membrane of the second-stage spore, and the outer membrane eventually disintegrated within the second-stage spore cortex. A densely staining double layer (spore-coat primordium) developed external to the outer forespore membrane. The inner spore coat and the outer cortical layer of the second-stage spore developed from this primordium. The outer part of the spore coat, probably of sporangial origin, was laid down on the external surface of the inner spore coat. By 12 hr, second-stage spores were almost mature. By 20 hr, the mature endospores, with a thickened outer coat, were often still enclosed by degenerate primary cell wall and by the outer cortical layer and spore coat of the initial spore.     

Metabolic Requirements for Microcycle Sporogenesis of Bacillus megaterium

Spores of Bacillus megaterium QM B1551 germinated, elongated, and resporulated (microcycle sporogenesis) in simple chemically defined media which permitted no cell division. The second-stage spores thus produced were heat-stable and required heat activation for germination. The original amount of spore deoxyribonucleic acid tripled before completion of the cycle. Acetate and a small amount of a tricarboxylic acid cycle intermediate were the minimal organic metabolic requirements for microcycle sporogenesis. During this cycle, germinated cells oxidized acetate only after a delay, whether or not glucose was initially present. Spores that were germinated in the absence of a carbon source first oxidized an endogenous substrate, and then developed the ability to oxidize acetate.     

Microcycle conidiation and its genetic basis in Neurospora crassa.

Some wild isolates of Neurospora show microcycle conidiation in liquid culture under continuous agitation. Macroconidia from agar-grown mycelial cultures germinated in liquid and the germlings spontaneously produced conidia with no intervening mycelial phase. Three types of microcycle conidiation were seen among progeny of N. crassa Vickramam A x N. crassa a wild-type: (1) multinucleate blastoconidia produced by apical budding and septation, (2) multinucleate arthroconidia produced by holothallic septation and disarticulation of cells, and (3) uninucleate microconidia produced directly from conidiogenous cells of the germlings. Two genes were identified which control specific patterns of microcycle conidiogenesis. A single gene mcb in linkage group VR near al-3 (3.2% recombination) controls blastoconidiation. This gene is epistatic to gene mcm located in linkage group IIL, very near ro-7 (1.4%). mcm controls both microconidiation and arthroconidiation depending on temperature. Strains of genotype mcm produce microconidia almost exclusively at 18-22 degrees C, but arthroconidia with few or no microconidia at 30 degrees C. Because they result in rapid and synchronized conidiation in liquid culture, the two genes should be useful for studies of developmental gene regulation. mcm makes it possible to obtain large quantities of pure microconidia rapidly for experimentation.     

Macromolecular Synthesis During Microcycle Sporogenesis of Bacillus cereus T

Microcycle sporogenesis induced in Bacillus cereus T by phosphate limitation occurs over a narrow range of phosphate to spore inoculum ratios. Sufficient phosphate is required to satisfy the demands for a twofold increase in deoxyribonucleic acid; net ribonucleic acid synthesis is not required. The total ribonucleic acid content of the culture was variable, and deoxyribonucleic acid synthesis was restricted to a twofold increase. Developmental changes during outgrowth occurred synchronously, whereas enzyme synthesis was periodic. The timing of the synthesis of tricarboxylic cycle enzymes, extracellular protease, arginase, histidase, and alkaline phosphatase was measured. Histidase could be induced after 2.5 hr throughout microcycle sporogenesis. Several other features of macromolecular synthesis during microcycle sporogenesis are described. Differences between this pattern and those observed during outgrowth leading to cell division are discussed. A technique for accurately estimating the levels and time of synthesis of incompletely extractable, labile enzymes is also presented.     

Spore Yield and Microcycle Conidiation of Colletotrichum gloeosporioides in Liquid Culture

The effect of V8 juice concentration (5 to 40%, vol/vol), spore inoculum density (10⁵ and 10⁷ spores per ml), and liquid batch or fed-batch culture condition on mycelium and spore production by Colletotrichum gloeosporioides was evaluated. The amount of mycelium produced, the time required for initiation of sporulation following attainment of maximum mycelium, and the time for attainment of maximum spore concentration increased with increasing V8 juice concentration in batch culture. Cultures containing V8 juice at >10% achieved a similar spore density (apparent spore-carrying capacity) of about 0.8 mg of spores per ml (1 × 10⁷ to 2 × 10⁷ spores per ml) independent of inoculum density and V8 juice concentration. The relative spore yield decreased from a high of 64% of the total biomass for the low-inoculum 5% V8 culture, through 13% for the analogous 40% V8 culture, to a low of 2% for the high-inoculum 27% V8 culture. Fed-batch cultures were used to establish conditions of high spore density and low substrate availability but high substrate flux. The rate of addition of V8 juice was adjusted to approximate the rate of substrate utilization by the (increasing) biomass. The final spore concentration was about four times higher (3.0 mg of spores per ml) than the apparent spore-carrying capacity in batch culture. This high spore yield was obtained at the expense of greatly reduced mycelium, resulting in a high relative spore yield (62% of the total biomass). Microcycle conidiation occurred in the fed-batch but not batch systems. These data indicate that substrate-limited, fed-batch culture can be used to increase the amount and efficiency of spore production by C. gloeosporioides by maintaining microcycle conidiation conditions favoring allocation of nutrients to spore rather than mycelium production.     

Requirement of Deoxyribonucleic Acid Synthesis for Microcycle Sporulation in Bacillus megaterium

Bacillus megaterium cells have been examined during outgrowth for their macromolecular content, ability to undergo microcycle sporulation, the time of their growth division, the time of deoxyribonucleic acid (DNA) replication initiation, and their ability to synthesize DNA after transfer to sporulation medium. The increase in total DNA content of the cells increased discontinuously beginning at 90 min. Thymidine incorporation became insensitive to chloramphenicol between 90 and 105 min of outgrowth. At 90 min the cells acquired the ability to undergo microcycle sporulation and the degree of sporulation depended on the time spent in outgrowth, with maximal sporulation occurring at 180 min. During outgrowth, cells underwent one synchronous growth division beginning at 225 min and ending at 270 min. Outgrowing cells were not able to continue DNA synthesis after transfer to sporulation medium. The data suggest that DNA replication starts before cells are able to undergo microcycle sporulation; however, the initiation of replication may not be the only requirement for microcycle sporulation.     

Microcycle conidiation in submerged cultures of Penicillium cyclopium attained without temperature changes

Microcycle conidiation in shaken cultures of Penicillium cyclopium M 79 was induced at 24 degrees C without any shock treatment. The occurrence of a microcycle depended on the presence of an organic acid (especially glutamic acid) in combination with glucose, low phosphate concentration, light and sufficient aeration. Absence of glucose and/or lowered aeration evoked vegetative growth. A synchronous and homogeneous microcycle required a certain relationship between the number of inoculated conidia and the concentration of the organic acid in the medium; the optimum was at 0.08 nmol acid per conidium. Higher values stimulated normal vegetative growth. A shortage or absence of the organic acid led to an atypical growth. The effect of organic acid can be partially replaced by addition of 2% (w/v) CaCO3. Addition of NH+4 in concentrations higher than 6 mM to cultures with glutamate or glutamine evoked vegetative growth.     

基于转录组的冬虫夏草菌微循环产孢研究

为研究冬虫夏草菌（Ophiocordyceps sinensis）微循环产孢过程中的分子机理,采用高通量测序技术,对微循环产孢前后冬虫夏草菌的转录组进行研究。筛选获得差异表达基因6 902个。Gene Ontology（GO）功能聚类分析表明,差异表达基因主要参与分子功能、胞内运输、核糖核蛋白复合体等生物学通路。京都基因与基因组百科全书（Kyoto Encyclopedia of Genes and Genomes,KEGG)功能富集分析结果表明,差异表达基因参与了核糖体、嘧啶代谢、蛋白酶体、嘌呤代谢、甘氨酸代谢等过程。Mmc、Mcb、MaH1、MaPP5、MaAGA、Pyk等候选基因不同程度的参与了冬虫夏草菌微循环产孢过程,其中Mcb家族基因可能起到关键作用。通过qRT PCR验证差异表达基因,定量结果与转录组测序结果一致。本研究为进一步揭示冬虫夏草菌微循环产孢分子机制以及关键基因的调控提供了重要信息。     

Microcycle conidiation in Penicillium urticae: an ultrastructural investigation of conidiogenesis.

A cultivation system has been developed for Penicillium urticae which yields 'microcycle' conidiation in submerged culture. Spherical growth of spores was initiated by incubation at 37 degrees C in a growth-favoring medium. Transfer of these enlarged spores to a nitrogen-poor medium at 35 degrees C results in synchronous germination and limited outgrowth followed by roughly synchronous conidiation. A study of the conidiation stage showed that a phialide and an immature conidium began to form at the tip of all germ tubes 18 h after the temperature shift. By 24 h additional phialides commonly appeared as a branch near the tip of the germ tube and the more mature conidia exhibited increasing refractility. The earliest ultrastructural signs of conidiation were various round invaginations in the plasma membrane and a thickening and rounding of the new spore wall which appeared as an inner extension of the phialide cell wall. Upon segregation of the conidium from the phialide cell by conidial wall formation, 'trench-like' invaginations gradually appeared in the plasma membrane and a disorganized rodlet pattern was formed on the outer surface of the maturing conidial wall. Continued maturation involved the formation of chains of conidia and phialide senescence which was characterized by a general degradation of intracellular structure. A comparison with standard surface and submerged culture conidiation indicated that 'microcycle' conidiation, while less prolific, was essentially identical.     

Electrophoresis in nanochannels: brief review and speculation

The relevant physical phenomena that dominate electrophoretic transport of ions and macromolecules within long, thin nanochannels are reviewed, and a few papers relevant to the discussion are cited. Sample ion transport through nanochannels is largely a function of their interaction with electric double layer. For small ions, this coupling includes the net effect of the external applied field, the internal field of the double layer, and the non-uniform velocity of the liquid. Adsorption/desorption kinetics and the effects of surface roughness may also be important in nanochannel electrophoresis. For macromolecules, the resulting motion is more complex as there is further coupling via steric interactions and perhaps polarization effects. These complex interactions and coupled physics represent a valuable opportunity for novel electrophoretic and chromatographic separations.