Synthesis, X-ray crystal structure and magnetic study of the 1D {[Cu2(N,N,N′,N′-tetramethyl-ethylenediamine)2(μ-1,5-dca)2(dca)2]}n complex

Reaction of Cu(NO₃)₂ · 3H₂O, N,N,N′,N′-tetramethyl-ethylenediamine (L) and sodium dicyanamide (Nadca) in aqueous medium yields a complex the {[Cu₂L₂(μ-1,5-dca)₂(dca)₂]}_n complex, 1. Single crystal X-ray analysis reveals that complex 1 has a 1D infinite chain structure in which copper(II) ions are bridged by single dicyanamide anions in an end-to-end fashion. The coordination environment around copper(II) is distorted square pyramidal. Two among the four coordination sites of the basal plane are occupied by the nitrogen atoms of the diamine and two remaining sites are occupied by the terminal nitrogen atom of a bridging and of a monodentate dca anions. The fifth coordination site (apical) is occupied by a nitrogen atom from a bridging dca anion of an adjacent CuL(dca)₂ moiety, yielding the [Cu₂L₂(μ-1,5-dca)₂(dca)₂] dinuclear unit. Dimeric units are connected to each other by single μ-1,5-dicyanamido group to form infinite 1D chains which propagate parallel to the crystallographic c-axis. The variable temperature magnetic susceptibility measurements evidenced weakly antiferromagnetic interactions (J = −0.26 cm⁻¹) in {[Cu₂L₂(μ-1,5-dca)₂(dca)₂]}_n, 1.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Synthesis and structural characterization of the molecular loop [cis-Mo2(N,N-di-p-anisylformamidinate)2]2(O2C-CHCCH-CO2)2

A new molecular loop composed of two quadruply bonded Mo₂(DAniF)₂ units (DAniF=N,N^′-di-p-anisylformamidinate) linked by two chiral allene-1,3-dicarboxylate anions has been prepared from the reaction of [cis-Mo₂(DAniF)₂(MeCN)₄](BF₄)₂ with the bis(tetraethylammonium) salt of allene-1,3-dicarboxylic acid. This compound, [cis-Mo₂(DAniF)₂]₂(O₂C-CHCCH-CO₂)₂ (1), has been characterized by X-ray crystallography and by ¹H NMR and UV-Vis spectroscopy. The molecule possesses a center of inversion and hence is meso. There is only weak electronic coupling between the two Mo₂ ⁴⁺ units as revealed by electrochemical measurements.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Thiolato-bridged “Linear” trinuclear platinum complexes [Pt3(μ-SR)4(dppm)2]

Thiolato-bridged tri- and dinuclear platinum complexes of the types [Pt₃(μ-SR)₄(dppm)₂]²⁺ (1) and [Pt₂(μ-ER)₂(dppm)₂]²⁺ (2) (E=S or Se; R=alkyl or aryl; dppm=bis(diphenylphosphino)methane) have been prepared using the mononuclear precursors [Pt(ER)₂(dppm)]. The complexes have been characterized by NMR (¹H, ¹³C, ³¹P, ¹⁹⁵Pt), FT-IR and FAB mass spectral data. The structure of [Pt₃(μ-SC₆H₄CH₃-4)₄(dppm)₂][CF₃SO₃]₂ · 6CH₂Cl₂ (1d), has been established through X-ray crystallography, revealing a zig-zag arrangement of the three coordination spheres around the platinum atoms.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

The azidopentacyanoferrate(III) ion as a tecton in constructing heterometallic complexes: Synthesis, crystal structure and magnetic properties of [Mn(valphen)(H2O)2]2[(H2O)(valphen)Mn(μ-CN)Fe(CN)4(N3)]·8H2O

By employing the common precursor Na₃[Fe(CN)₅(NH₃)]·3H₂O in a new synthetic approach, the azidopentacyanoferrate(III) ion has been isolated and structurally characterized as (Ph₄As)₂[Na(H₂O)₄][Fe(CN)₅(N₃)] 1. In order to confirm its building block ability, compound 1 has been reacted with the mononuclear complex [Mn(valphen)(H₂O)₂]ClO₄ (H₂valphen represents the Schiff base resulting from the condensation of o-vanillin with 1,2-phenylenediamine in a 2:1 M ratio) to afford the new Mn^III-Fe^III heterometallic system [Mn(valphen)(H₂O)₂]₂[(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]·8H₂O 2. The crystal structure of compound 2 reveals a supramolecular assembly generated by [(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]²⁻ dianions and discrete [Mn(valphen)(H₂O)₂]⁺ counterions. The dynamic magnetic measurements of compound 2 point to a slow relaxation of the magnetization.     

Synthesis, structure and redox properties of an unexpected trinuclear copper(II) complex with aspartame: [Cu(apm)2Cu(μ-N,O:O′-apm)2(H2O)Cu(apm)2(H2O)] · 5H2O

Structural, magnetic and spectroscopic data of a new trinuclear copper(II) complex with the ligand aspartame (apm) are described. [Cu(apm)₂Cu(μ-N,O:O′-apm)₂(H₂O)Cu(apm)₂(H₂O)] · 5H₂O crystallizes in the triclinic system, space group P1 (#1) with a = 7.3300(1) Å, b = 15.6840(1) Å, c = 21.5280(1) Å, α = 93.02(1)°, β = 93.21(1)°, γ = 92.66(1)° and Z = 1. Aspartame coordinates to Cu(II) through the carboxylate and β-amino groups. The carboxylate groups of the two central ligands act as bidentate bridges in a syn-anti conformation while the carboxylate groups of the four peripheral ligands are monodentate in a syn conformation. The central copper ion is in a distorted square pyramidal geometry with the apical position being occupied by one oxygen atom of the water molecule. The two terminal copper(II) atoms are coordinated to the ligands in the same position but their coordination sphere differs from each other due to the fact that one copper atom has a water molecule in an apical position leading to an octahedral coordination sphere while the other copper atom is exclusively coordinated to aspartame ligands forming a distorted square pyramidal coordination sphere. Thermal analysis is consistent with the X-ray structure. EPR spectra and CV curves indicate a rupture of the trinuclear framework when this complex is dissolved in ethanol or DMF, forming a mononuclear species, with a tetragonal structure.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

Crystal structures, spectral and magnetic properties of cobalt(II) pyridinecarboxylates: A novel polymeric chain in {[{2,6-(MeO)2nic}2(H2O)2Co(μ-H2O)Co(H2O)4(μ-H2O)]{2,6-(MeO)2nic}2 · 6H2O}n

Synthesis and characterization of two new cobalt(II) complexes, namely monomeric [Co(2-MeSnic)₂(H₂O)₄] · 4H₂O (2-MeSnic is 2-methylthionicotinate) and polymeric {[{2,6-(MeO)₂nic}₂(H₂O)₂Co(μ-H₂O)Co(H₂O)₄(μ-H₂O)]{2,6-(MeO)₂nic}₂ · 6H₂O}_n (2,6-(MeO)₂nic is 2,6-dimethoxynicotinate), are reported. The characterizations were based on elemental analysis, infrared and electronic spectra as well as magnetic measurements. Crystal structures of both complexes have been determined. In both of them - ([Co(2-MeSnic)₂(H₂O)₄] · 4H₂O and {[{2,6-(MeO)₂nic}₂(H₂O)₂Co(μ-H₂O)Co(H₂O)₄(μ-H₂O)]{2,6-(MeO)₂nic}₂ · 6H₂O}_n) - the Co^II atom is six-coordinated. In the 2nd complex, there are two nonequivalent Co^II central atoms, involved in forming a linear polymeric chain with alternating cationic and neutral part. One of them is octahedrally coordinated by a carboxyl oxygen atom of 2,6-(MeO)₂nic, two water molecules and the corresponding centrosymmetrically located atoms. The second Co^II atom is also octahedrally coordinated by six water molecules. Both coordination polyhedra are bridged by a water molecule. The charge of the cationic part is compensated for by two independent anionic 2,6-(MeO)₂nic units. The structure is held together by a complicated system of hydrogen bonds.     

The complexes with end-to-end dicyanamide bridges: syntheses, characterization and crystal structures of [Cu(μ1,5-dca)2(phen)]n and [Cd(μ1,5-dca)2(py)2]n (phen=phenanthroline; py=pyridine; dca=dicyanamide, N(CN)2 )

Two new dicyanamide (dicyanamide=[N(CN)₂]⁻, dca) bridged complexes, [Cu(μ_1,5-dca)₂(phen)]_n (1) and [Cd(μ_1,5-dca)₂(py)₂]_n (2) have been synthesized and their structures have been determined by X-ray crystallography diffraction. Complex 1 crystallizes in the monoclinic space group P2(1)/c with a=10.1502(3), b=10.9815(4), c=14.5839(4) Å and Z=4. The adjacent copper atoms are connected by single end-to-end dca bridges to form a chain structure along the b axis. The chains are linked via Cu?N weak interactions to give rise to a 2D layer structure, which furthermore into a 3D structure by the π-π interaction between aromatic rings of adjacent layers. Complex 2 crystallizes in the monoclinic space group C2/m with a=6.6849(10), b=17.476(2), c=13.231(2) Å and Z=4. The cadmium(II) center is six-coordinated with a distorted octahedral geometry, bounded to four N atoms of four dca ligands and two N atoms of two-chelated py ligands. Neighbor Cd(II) atoms are linked by the double end-to-end dca bridges to generate a chain structure, which result in a 2D layer structure through the π-π interactions between the adjacent chains with distances 3.641 Å. EPR and magnetic results of 1 suggest that the complex exhibits a weak ferromagnetic interaction through CuNCNCNCu pathways.     

Preparation, structures and properties of oxalate-bridged binuclear iron(III) complex: [(acac)2Fe(μ-ox)Fe(acac)2] and [(acac)2Fe(μ-ox)Fe(acac)2]·CH2ClCH2Cl

An oxalate-bridged binuclear iron(III) complex, [(acac)₂Fe(μ-ox)Fe(acac)₂], (acac⁻=acetylacetonate anion and ox²⁻=oxalate anion) was prepared. The complex crystallized as two types of crystals under different conditions: one had 1,2-dichloroethane as a solvent molecule of crystallization 2, the other did not 1. Both compounds have been characterized by X-ray crystallography, infrared spectroscopy, and thermogravimetric analysis. Compound 1 has also been characterized by UV-Vis and ¹H NMR spectroscopies, mass spectrometry, and electrochemistry. In both crystals, each iron(III) is coordinated in an octahedral arrangement by the oxygen atoms of an oxalate-bridging ligand and four oxygen atoms belonging to peripheral acac ligands in an octahedral arrangement. The intermetallic distance of Fe?Fe is 5.4368(9) Å in 1 and 5.438(2) Å in 2. Two iron(III) ions in each crystal are bridged by the oxalate and both lie in the oxalate-plane. The results of thermal analyses imply that the thermal stability of 2 is lower than that of 1. Cyclic voltammograms of 1 in acetonitrile and dichloromethane at low temperature showed two consecutive, quasi-Nernstian, one-electron reduction steps corresponding to the reduction of Fe^III-Fe^III to Fe^III-Fe^II followed by the reduction of Fe^III-Fe^II to Fe^II-Fe^II. The electrochemical comproportionation constants (K_c) of the equilibrium (Fe^III-Fe^III) + (Fe^II-Fe^II) ? 2(Fe^III-Fe^II) are 10^8.9 in acetonitrile medium and 10^8.5 in dichloromethane, respectively. The considerably large K_c values indicate that the main factor contributing to the stabilization of the Fe^III-Fe^II mixed-valence state is electronic delocalization through the oxalate-bridge.     

Low temperature matrix photochemistry of M2(CO)4(μ-S-t-Bu)2 and [M(CO)2Cl2] anions, where M = Rh and Ir

Photolysis of M₂(CO)₄(μ-S-t-Bu)₂, where M = Rh or Ir, in Nujol matrices at ca. 90 K results in simple CO loss to form a tricarbonyl intermediate analogous to that observed for Rh₂(CO)₄(μ-Cl)₂. Photolysis of the anions, [M(CO)₂Cl₂]¹⁻, where M = Rh or Ir, in inert ionic matrices at ca. 90 K, results in CO-loss to form an intermediate analogous to that formed by Rh(CO)₂(i-Pr₂HN)Cl. Finally, photolysis of trans-Ir(CO)(PMe₃)₂Cl in a Nujol matrix at ca. 90 K gives rise to a new species whose carbonyl band is shifted slightly down in energy as has been observed for trans-Rh(CO)(PMe₃)₂Cl. In all cases the iridium compounds behave similarly to the rhodium species although the photon energy for iridium photochemistry is typically above that of the rhodium compounds.     

1,3-Bis(α-aminoisopropyl)benzene, meta-C6H4(CMe2NH2)2: An N,N-bridging and N,C,N-cyclometalating ligand

Saponification of the bis(carbamic acid ester) 1,3-C₆H₄(CMe₂NHCO₂Me)₂ (1), made by the addition of methanol to commercial 1,3-C₆H₄(CMe₂NCO)₂, yielded the meta-phenylene-based bis(tertiary carbinamine) 1,3-C₆H₄(CMe₂NH₂)₂ (2). Dinuclear [{(η⁴-1,5-C₈H₁₂)RhCl}₂{μ-1,3-C₆H₄(CMe₂NH₂)₂}] (3) resulted from the action of 2 on [{(η⁴-1,5-C₈H₁₂)Rh(μ-Cl)}₂] in toluene. Combination of 2 with PdCl₂ or K₂[PdCl₄] gave the dipalladium macrocycle trans,trans-[{μ-1,3-C₆H₄(CMe₂NH₂)₂}₂(PdCl₂)₂] (4) along with cyclometalated [{2,6-C₆H₃(CMe₂NH₂)₂-κN,κC¹,κN′}PdCl] (5). Substitution of PEt₃ for the labile chlorido ligand of 5 afforded [{2,6-C₆H₃(CMe₂NH₂)₂-κN,κC¹, κN′}Pd(PEt₃)]Cl (6). The crystal structures of the following compounds were determined: bis(carbamic acid ester) 1, ligand 2 as its bis(trifluoroacetate) salt [1,3-C₆H₄(CMe₂NH₃)₂](O₂CCF₃)₂, 2 · (HAc_f)₂, complexes 3 and 6, as well as 1,3-C₆H₄(CMe₂OH)₂ (the diol analogue of 2).     

Mono- and binuclear copper(II) complexes containing di(2-pyridyl)sulfide (DPS) as chelating ligand: Spectroscopic characterization and crystal structures of [Cu(DPS)(H2O)Cl2] · H2O and [{Cu(DPS)Cl}2μ-(Cl)2]

The complexes [Cu(DPS)(H₂O)Cl₂] · H₂O (1a) and [{Cu(DPS)Cl}₂μ-(Cl)₂] (1b) where DPS = Di(2-pyridyl)sulfide have been synthesized and characterized using elemental analysis, thermal analysis (TG/DSC), vibrational and electronic spectroscopies as well as electron paramagnetic resonance (EPR). Additionally, the crystal and molecular structures of both compounds have been determined by X-ray diffraction techniques.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.