Resistance of Bacillus Endospores to Extreme Terrestrial and Extraterrestrial Environments

Endospores of Bacillus spp., especially Bacillus subtilis, have served as experimental models for exploring the molecular mechanisms underlying the incredible longevity of spores and their resistance to environmental insults. In this review we summarize the molecular laboratory model of spore resistance mechanisms and attempt to use the model as a basis for exploration of the resistance of spores to environmental extremes both on Earth and during postulated interplanetary transfer through space as a result of natural impact processes.     

The high-resolution architecture and structural dynamics of Bacillus spores

The capability to image single microbial cell surfaces at nanometer scale under native conditions would profoundly impact mechanistic and structural studies of pathogenesis, immunobiology, environmental resistance, and biotransformation. Here, using in vitro atomic force microscopy, we have directly visualized high-resolution native structures of bacterial endospores, including the exosporium and spore coats of four Bacillus species in air and water environments. Our results demonstrate that the mechanisms of spore coat self-assembly are similar to those described for inorganic and macromolecular crystallization. The dimensions of individual Bacillus atrophaeus spores decrease reversibly by 12% in response to a change in the environment from fully hydrated to air-dried state, establishing that the dormant spore is a dynamic physical structure. The interspecies distributions of spore length and width were determined for four species of Bacillus spores in water and air environments. The dimensions of individual spores differ significantly depending upon species, growth regimes, and environmental conditions. These findings may be useful in the reconstruction of environmental and physiological conditions during spore formation and for modeling the inhalation and dispersal of spores. This study provides a direct insight into molecular architecture and structural variability of bacterial endospores as a function of spatial and developmental organizational scales.     

Role of pigmentation in protecting Bacillus sp. endospores against environmental UV radiation

Bacillus endospores show different kinds of pigmentation. Red-pigmented spores of Bacillus atrophaeus DSM 675, dark-gray spores of B. atrophaeus(T) DSM 7264 and light-gray spores of B. subtilis DSM 5611 were used to study the protective role of the pigments in their resistance to defined ranges of environmental UV radiation. Spores of B. atrophaeus DSM 675 possessing a dark-red pigment were 10 times more resistant to UV-A radiation than those of the other two investigated strains, whereas the responses to the more energetic UV-B and UV-C radiation were identical in all three strains. The methanol fraction of the extracted pigment from the spores absorbs in the associated wavelength area. These results indicate that the carotene-like pigment of spores of B. atrophaeus DSM 675 affects the resistance of spores to environmental UV-A radiation.     

Analysis of the role of bacterial endospore cortex structure in resistance properties and demonstration of its conservation amongst species

AIMS: The aim of this work was to compare the chemical structure of the spore cortex of a range of species, and to determine any correlation between cortex structure and spore resistance properties. METHODS AND RESULTS: The fine chemical structure of the cortex of Bacillus subtilis, Bacillus megaterium, Bacillus cereus and Clostridium botulinum was examined by muropeptide analysis using reverse phase HPLC. There is a conserved basic structure between peptidoglycan of these species, with the only difference being the level of de-N-acetylation of an amino sugar. In order to determine if an alteration in cortex structure correlates with heat resistance properties, the peptidoglycan structure and properties of B. subtilis spores prepared under different conditions were compared. Peptidoglycan from spores prepared in Nutrient Broth (NB) showed reduction in single L-alanine substituted muramic acid to only 13.9% compared with 20.6% in CCY-grown spores. NB-prepared spores are also unstable, with 161-fold less heat resistance (60 min, 85 degrees C) and 43 times less Mn(2+) content than CCY-grown spores. Addition of MnCl(2) to NB led to a peptidoglycan profile similar to CCY-grown spores, sevenfold more heat resistance (60 min, 85 degrees C) and an 86-fold increase in Mn(2+) content. Addition of CCY salts to NB led all parameters to be comparable with CCY-grown spore levels. CONCLUSION: It has been shown that peptidoglycan structure is conserved in four spore-forming bacteria. Also, spore heat resistance is multifactorial and cannot be accounted for by any single parameter. SIGNIFICANCE AND IMPACT OF THE STUDY: Endospores made by diverse species most likely have common mechanisms of heat resistance. However, the molecular basis for their resistance remains elusive.     

Direct investigation of viscosity of an atypical inner membrane of Bacillus spores: A molecular rotor/FLIM study

We utilize the fluorescent molecular rotor Bodipy-C₁₂ to investigate the viscoelastic properties of hydrophobic layers of bacterial spores Bacillus subtilis. The molecular rotor shows a marked increase in fluorescence lifetime, from 0.3 to 4 ns, upon viscosity increase from 1 to 1500 cP and can be incorporated into the hydrophobic layers within the spores from dormant state through to germination. We use fluorescence lifetime imaging microscopy to visualize the viscosity inside different compartments of the bacterial spore in order to investigate the inner membrane and relate its compaction to the extreme resistance observed during exposure of spores to toxic chemicals. We demonstrate that the bacterial spores possess an inner membrane that is characterized by a very high viscosity, exceeding 1000 cP, where the lipid bilayer is likely in a gel state. We also show that this membrane evolves during germination to reach a viscosity value close to that of a vegetative cell membrane, ca. 600 cP. The present study demonstrates quantitative imaging of the microscopic viscosity in hydrophobic layers of bacterial spores Bacillus subtilis and shows the potential for further investigation of spore membranes under environmental stress.     

Bacterial spores in food: how phenotypic variability complicates prediction of spore properties and bacterial behavior

Bacillus spores are a known cause of food spoilage and their increased resistance poses a major challenge in efficient elimination. Recent studies on bacterial cultures at the single cell level have revealed how minor differences in essential spore properties, such as core water content or germinant receptor levels, can cause the observed differences in spore germination and outgrowth behavior. Moreover, heterogeneous behavior is influenced by commonly accepted food preservation techniques, such as heating or the usage of weak organic acids. Understanding the underlying molecular mechanisms and key players involved in phenotypic heterogeneity of spores, while taking the spore's history into account, will improve predictability of the spore's behavior to various treatments and triggers.     

Inactivation of bacillus spores in dry systems at low and high temperatures.

A plot of the thermal resistance of Bacillus subtilis var. niger spores (log D value) against temperature was linear between 37 and 190 degrees C (z = 23 degrees C), provided that the relative humidity of the spore environment was kept below a certain critical level. The corresponding plot for Bacillus stearothermophilus spores was linear in the range 150 to 180 degrees C (z = 29 degrees C) but departed from linearity at lower temperatures (decreasing z value). However, the z value of 29 degrees C was decreased to 23 degrees C if spores were dried before heat treatment. The straight line corresponding to this new z value was consistent with the inactivation rate at a lower temperature (60 degrees C). The data indicate that bacterial spores which are treated in dry heat at an environmental relative humidity near zero are inactivated mainly by a drying process. By extrapolation of the thermal resistance plot obtained under these conditions for B. subtilis var. niger spores, the D value at 0 degrees C would be about 4 years.     

掷孢酵母及其应用研究进展

掷孢酵母是一类能够弹射孢子(称为掷孢子)的酵母菌,主要由Bullera属、Sporobolomyces属和Sporidiobolus属组成,该类酵母分布广泛。在实验室培养过程中多以芽殖、掷孢子以及菌丝状生长,Sporidiobolus属的菌株经配对能够形成有性孢子。分子生物学手段的开展使掷孢酵母各类群间的系统发育关系更加明确。本文结合本实验室的研究结果,阐述了掷孢酵母存在的细胞分化现象,并且推测细胞分化有助于菌体抵抗逆境。因此,掷孢酵母可以作为一种潜在的模式生物对抗逆机制进行探究。在食品和环境问题备受瞩目的今天,掷孢酵母以其可自身积累酯类、色素、酶类等有益代谢产物的特点,及治理污染物特性越来越受到人们的关注。     

Bacterial endospores and their significance in stress resistance

In terms of resistance to extreme environmental stresses, the bacterial spore represents a pinnacle of evolution. Spores are highly resistant to a wide variety of physical stresses such as: wet and dry heat, UV and gamma radiation, oxidizing agents, chemicals, and extremes of both vacuum and ultrahigh hydrostatic pressure. Some of the molecular mechanisms underlying spore resistance properties have been elucidated in the laboratory, and involve both: (i) protection of vital spore macromolecules during dormancy, and (ii) repair of damaged macromolecules during germination. Our group has recently become interested in testing if the laboratory model of spore UV resistance is relevant to spore persistence in the environment. We have constructed a number of Bacillus subtilis strains which are defective in various DNA repair systems and spore structural components. Using spores of these strains, we have been exploring: (i) the types of damage induced in DNA by the UV-B and UV-A components of sunlight; (ii) the relative contribution of the major spore DNA repair systems to spore solar radiation resistance; and (iii) the role of spore structural components such as the spore coats and dipicolinic acid (DPA) in attenuation of the lethal and mutagenic effects of solar UV. The current data are reviewed with the ultimate goal of obtaining a complete model describing spore persistence and longevity in the terrestrial solar UV radiation environment. This revised version was published online in August 2006 with corrections to the Cover Date.     

Bacterial spore structures and their protective role in biocide resistance

The structure and chemical composition of bacterial spores differ considerably from those of vegetative cells. These differences largely account for the unique resistance properties of the spore to environmental stresses, including disinfectants and sterilants, resulting in the emergence of spore-forming bacteria such as Clostridium difficile as major hospital pathogens. Although there has been considerable work investigating the mechanisms of action of many sporicidal biocides against Bacillus subtilis spores, there is far less information available for other species and particularly for various Clostridia. This paucity of information represents a major gap in our knowledge given the importance of Clostridia as human pathogens. This review considers the main spore structures, highlighting their relevance to spore resistance properties and detailing their chemical composition, with a particular emphasis on the differences between various spore formers. Such information will be vital for the rational design and development of novel sporicidal chemistries with enhanced activity in the future.     

UV resistance of Bacillus anthracis spores revisited: validation of Bacillus subtilis spores as UV surrogates for spores of B. anthracis Sterne

Recent bioterrorism concerns have prompted renewed efforts towards understanding the biology of bacterial spore resistance to radiation with a special emphasis on the spores of Bacillus anthracis. A review of the literature revealed that B. anthracis Sterne spores may be three to four times more resistant to 254-nm-wavelength UV than are spores of commonly used indicator strains of Bacillus subtilis. To test this notion, B. anthracis Sterne spores were purified and their UV inactivation kinetics were determined in parallel with those of the spores of two indicator strains of B. subtilis, strains WN624 and ATCC 6633. When prepared and assayed under identical conditions, the spores of all three strains exhibited essentially identical UV inactivation kinetics. The data indicate that standard UV treatments that are effective against B. subtilis spores are likely also sufficient to inactivate B. anthracis spores and that the spores of standard B. subtilis strains could reliably be used as a biodosimetry model for the UV inactivation of B. anthracis spores.     

枯草芽孢杆菌微生态制剂发酵研究进展

微生态制剂是饲用抗生素的绿色有效替代品。枯草芽孢杆菌在逆境中可形成抗逆性强的芽孢,在生产和应用过程中保持高活性,是一种高效的微生态制剂菌种。提高枯草芽孢杆菌活菌数及芽孢率是保证微生态制剂产品质量的关键。本文综述了枯草芽孢杆菌芽孢形成的分子生物学机制及影响芽孢形成的重要因素,进一步比较枯草芽孢杆菌微生态制剂不同发酵方式的特点,重点阐述了提高枯草芽孢杆菌有效生物量的工艺优化,最后介绍了枯草芽孢杆菌微生态制剂的应用,并对将来研究思路进行了讨论。     

Nanoscale Structural and Mechanical Analysis of Bacillus anthracis Spores Inactivated with Rapid Dry Heating

Effective killing of Bacillus anthracis spores is of paramount importance to antibioterrorism, food safety, environmental protection, and the medical device industry. Thus, a deeper understanding of the mechanisms of spore resistance and inactivation is highly desired for developing new strategies or improving the known methods for spore destruction. Previous studies have shown that spore inactivation mechanisms differ considerably depending upon the killing agents, such as heat (wet heat, dry heat), UV, ionizing radiation, and chemicals. It is believed that wet heat kills spores by inactivating critical enzymes, while dry heat kills spores by damaging their DNA. Many studies have focused on the biochemical aspects of spore inactivation by dry heat; few have investigated structural damages and changes in spore mechanical properties. In this study, we have inactivated Bacillus anthracis spores with rapid dry heating and performed nanoscale topographical and mechanical analysis of inactivated spores using atomic force microscopy (AFM). Our results revealed significant changes in spore morphology and nanomechanical properties after heat inactivation. In addition, we also found that these changes were different under different heating conditions that produced similar inactivation probabilities (high temperature for short exposure time versus low temperature for long exposure time). We attributed the differences to the differential thermal and mechanical stresses in the spore. The buildup of internal thermal and mechanical stresses may become prominent only in ultrafast, high-temperature heat inactivation when the experimental timescale is too short for heat-generated vapor to efficiently escape from the spore. Our results thus provide direct, visual evidences of the importance of thermal stresses and heat and mass transfer to spore inactivation by very rapid dry heating.     

Mechanisms of killing of spores of Bacillus subtilis by dimethyldioxirane

AIMS: To determine the mechanisms of Bacillus subtilis spore resistance to and killing by a novel sporicide, dimethyldioxirane (DMDO) that was generated in situ from acetone and potassium peroxymonosulfate at neutral pH. METHODS AND RESULTS: Spores of B. subtilis were effectively killed by DMDO. Rates of killing by DMDO of spores lacking most DNA protective alpha/beta-type small, acid-soluble spore proteins (alpha- beta- spores) or the major DNA repair protein, RecA, were very similar to that of wild-type spore killing. Survivors of wild-type and alpha- beta- spores treated with DMDO also exhibited no increase in mutations. Spores lacking much coat protein due either to mutation or chemical decoating were much more sensitive to DMDO than were wild-type spores, but were more resistant than growing cells. Wild-type spores killed with this reagent retained their large pool of dipicolinic acid (DPA), and the survivors of spores treated with DMDO were sensitized to wet heat. The DMDO-killed spores germinated with nutrients, albeit more slowly than untreated spores, but germinated faster than untreated spores with dodecylamine. The killed spores were also germinated by very high pressures and by lysozyme treatment in hypertonic medium, but many of these spores lysed shortly after their germination, and none of these treatments were able to revive the DMDO-killed spores. CONCLUSIONS: DMDO is an effective reagent for killing B. subtilis spores. The spore coat is a major factor in spore resistance to DMDO, which does not kill spores by DNA damage or by inactivating some component needed for spore germination. Rather, this reagent appears to kill spores by damaging the spore's inner membrane in some fashion. SIGNIFICANCE AND IMPACT OF THE STUDY: This work demonstrates that DMDO is an effective decontaminant for spores of Bacillus species that can work under mild conditions, and the killed spores cannot be revived. Evidence has also been obtained on the mechanisms of spore resistance to and killing by this reagent.     

Germination-initiated spores of Bacillus brevis Nagano retain their resistance properties.

Initiated spores and vegetative cells of the gramicidin S-producing Bacillus brevis Nagano were compared with respect to their resistance to various forms of stress (osmotic shock-starvation, exposure to ethanol, sonic oscillation, and heat). The resistance of initiated spores to all of these stress situations was considerably greater than that of vegetative cells and approached that of dormant spores. The period during which the initiated spores remained resistant to heat was extended by addition of gramicidin S. The antibiotic may therefore be of survival value to the species in nature by slowing down the development of initiated spores in the outgrowth phase of germination, thereby extending the period during which the cells are resistant to environmental stress.     

Spores of Bacillus subtilis: their resistance to and killing by radiation, heat and chemicals

A number of mechanisms are responsible for the resistance of spores of Bacillus species to heat, radiation and chemicals and for spore killing by these agents. Spore resistance to wet heat is determined largely by the water content of spore core, which is much lower than that in the growing cell protoplast. A lower core water content generally gives more wet heat-resistant spores. The level and type of spore core mineral ions and the intrinsic stability of total spore proteins also play a role in spore wet heat resistance, and the saturation of spore DNA with alpha/beta-type small, acid-soluble spore proteins (SASP) protects DNA against wet heat damage. However, how wet heat kills spores is not clear, although it is not through DNA damage. The alpha/beta-type SASP are also important in spore resistance to dry heat, as is DNA repair in spore outgrowth, as Bacillus subtilis spores are killed by dry heat via DNA damage. Both UV and gamma-radiation also kill spores via DNA damage. The mechanism of spore resistance to gamma-radiation is not well understood, although the alpha/beta-type SASP are not involved. In contrast, spore UV resistance is due largely to an alteration in spore DNA photochemistry caused by the binding of alpha/beta-type SASP to the DNA, and to a lesser extent to the photosensitizing action of the spore core's large pool of dipicolinic acid. UV irradiation of spores at 254 nm does not generate the cyclobutane dimers (CPDs) and (6-4)-photoproducts (64PPs) formed between adjacent pyrimidines in growing cells, but rather a thymidyl-thymidine adduct termed spore photoproduct (SP). While SP is formed in spores with approximately the same quantum efficiency as that for generation of CPDs and 64PPs in growing cells, SP is repaired rapidly and efficiently in spore outgrowth by a number of repair systems, at least one of which is specific for SP. Some chemicals (e.g. nitrous acid, formaldehyde) again kill spores by DNA damage, while others, in particular oxidizing agents, appear to damage the spore's inner membrane so that this membrane ruptures upon spore germination and outgrowth. There are also other agents such as glutaraldehyde for which the mechanism of spore killing is unclear. Factors important in spore chemical resistance vary with the chemical, but include: (i) the spore coat proteins that likely react with and detoxify chemical agents; (ii) the relative impermeability of the spore's inner membrane that restricts access of exogenous chemicals to the spore core; (iii) the protection of spore DNA by its saturation with alpha/beta-type SASP; and (iv) DNA repair for agents that kill spores via DNA damage. Given the importance of the killing of spores of Bacillus species in the food and medical products industry, a deeper understanding of the mechanisms of spore resistance and killing may lead to improved methods for spore destruction.     

Mechanisms of Bacillus subtilis spore resistance to and killing by aqueous ozone

AIMS: To determine the mechanisms of Bacillus subtilis spore killing by and resistance to aqueous ozone. METHODS AND RESULTS: Killing of B. subtilis spores by aqueous ozone was not due to damage to the spore's DNA, as wild-type spores were not mutagenized by ozone and wild-type and recA spores exhibited very similar ozone sensitivity. Spores (termed alpha-beta-) lacking the two major DNA protective alpha/beta-type small, acid-soluble spore proteins exhibited decreased ozone resistance but were also not mutagenized by ozone, and alpha-beta- and alpha-beta-recA spores exhibited identical ozone sensitivity. Killing of spores by ozone was greatly increased if spores were chemically decoated or carried a mutation in a gene encoding a protein essential for assembly of the spore coat. Ozone killing did not cause release of the spore core's large depot of dipicolinic acid (DPA), but these killed spores released all of their DPA after a subsequent normally sublethal heat treatment and also released DPA much more readily when germinated in dodecylamine than did untreated spores. However, ozone-killed spores did not germinate with either nutrients or Ca(2+)-DPA and could not be recovered by lysozyme treatment. CONCLUSIONS: Ozone does not kill spores by DNA damage, and the major factor in spore resistance to this agent appears to be the spore coat. Spore killing by ozone seems to render the spores defective in germination, perhaps because of damage to the spore's inner membrane. SIGNIFICANCE AND IMPACT OF THE STUDY: These results provide information on the mechanisms of spore killing by and resistance to ozone.     

Life cycle and spore resistance of spore-forming Bacillus atrophaeus

Bacillus endospores have a wide variety of important medical and industrial applications. This is an overview of the fundamental aspects of the life cycle, spore structure and factors that influence the spore resistance of spore-forming Bacillus. Bacillus atrophaeus was used as reference microorganism for this review because their spores are widely used to study spore resistance and morphology. Understanding the mechanisms involved in the cell cycle and spore survival is important for developing strategies for spore killing; producing highly resistant spores for biodefense, food and pharmaceutical applications; and developing new bioactive molecules and methods for spore surface display.     

Mechanisms of Bacillus subtilis spore killing by and resistance to an acidic Fe-EDTA-iodide-ethanol formulation

AIMS: To determine the mechanisms of Bacillus subtilis spore killing by and resistance to an acidic solution containing Fe(3+), EDTA, KI and ethanol termed the KMT reagent. METHODS AND RESULTS: Wild-type B. subtilis spores were not mutagenized by the KMT reagent but the wild-type and recA spores were killed at the same rate. Spores (alpha(-)beta(-)) lacking most DNA-protective alpha/beta-type small, acid-soluble spore proteins were less resistant to the KMT reagent than wild-type spores but were also not mutagenized, and alpha(-)beta(-) and alpha(-)beta(-)recA spores exhibited nearly identical resistance. Spore resistance to the KMT reagent was greatly decreased if spores had defective coats. However, the level of unsaturated fatty acids in the inner membrane did not determine spore sensitivity to the KMT reagent. Survivors in spore populations killed by the KMT reagent were sensitized to killing by wet heat or nitrous acid and to high salt in plating medium. KMT reagent-killed spores had not released their dipicolinic acid (DPA), although these killed spores released their DPA more readily when germinated with dodecylamine than did untreated spores. However, KMT reagent-killed spores did not germinate with nutrients or Ca(2+)-DPA and were recovered only poorly by lysozyme treatment in a hypertonic medium. CONCLUSIONS: The KMT reagent does not kill spores by DNA damage and a major factor in spore resistance to this reagent is the spore coat. KMT reagent treatment damages the spore's ability to germinate, perhaps by damaging the spore's inner membrane. However, this damage is not oxidation of unsaturated fatty acids. SIGNIFICANCE AND IMPACT OF THE STUDY: These results provide information on the mechanism of spore resistance to and killing by the KMT reagent developed for killing Bacillus spores.     

Mechanisms of killing of Bacillus subtilis spores by Decon and Oxone, two general decontaminants for biological agents

AIMS: To determine the mechanisms of Bacillus subtilis spore killing by and resistance to the general biological decontamination agents, Decon and Oxone. METHODS AND RESULTS: Spores of B. subtilis treated with Decon or Oxone did not accumulate DNA damage and were not mutagenized. Spore killing by these agents was increased if spores were decoated. Spores prepared at higher temperatures were more resistant to these agents, consistent with a major role for spore coats in this resistance. Neither Decon nor Oxone released the spore core's depot of dipicolinic acid (DPA), but Decon- and Oxone-treated spores more readily released DPA upon a subsequent normally sublethal heat treatment. Decon- and Oxone-killed spores initiated germination with dodecylamine more rapidly than untreated spores, but could not complete germination triggered by nutrients or Ca(2+)-DPA and did not degrade their peptidoglycan cortex. However, lysozyme treatment did not recover these spores. CONCLUSIONS: Decon and Oxone do not kill B. subtilis spores by DNA damage, and a major factor in spore resistance to these agents is the spore coat. Spore killing by both agents renders spores defective in germination, possibly because of damage to the inner membrane of spore. SIGNIFICANCE AND IMPACT OF STUDY: These results provide information on the mechanisms of the killing of bacterial spores by Decon and Oxone.