Filopodia initiation

Filopodia are long, slender, actin-rich cellular protrusions, which recently have become a focus of cell biology research because of their proposed roles as sensory and exploratory organelles that allow for “intelligent” cell behavior. Actin nucleation, elongation and bundling are believed to be essential for filopodia formation and functions. However, the identity of actin filament nucleators responsible for the initiation of filopodia remains controversial. Two alternative models, the convergent elongation and tip nucleation, emphasize two different actin filament nucleators, the Arp2/3 complex or formins, respectively, as key players during filopodia initiation. Although these two models in principle are not mutually exclusive, it is important to understand which of them is actually employed by cells. In this review, we discuss the existing evidence regarding the relative roles of the Arp2/3 complex and formins in filopodia initiation.     

Ancestral sporulation initiation

Members of the classes Bacilli and Clostridia are able to form endospores, with clostridia representing the ancestral phylogenetic line. In contrast to Bacillus subtilis, the process of sporulation initiation at the molecular level is less well understood in Clostridium acetobutylicum, the model organism of the clostridia. Especially the question of how the master regulator of sporulation, Spo0A, becomes phosphorylated, remained unsolved so far. Steiner et al. now provide compelling genetic and biochemical evidence for two different pathways of direct phosphorylation of Spo0A in C. acetobutylicum by three orphan sensor kinases. Cac0903 and Cac3319 act together, while the other pathway is only dependent on Cac0323. Abortion of sporulation initiation can be achieved by a kinase-like protein, Cac0437.     

Bypassing translation initiation

A high-resolution cryo-EM reconstruction of a ribosome-bound dicistrovirus IRES (Schüler et al., 2006) and the crystal structure of its ribosome binding domain (Pfingsten et al., 2006) provide new insights into an exceptional eukaryotic translation mechanism.     

Sulfolobus solfataricus translation initiation factor 1 stimulates translation initiation complex formation

The eukaryotic translation initiation factor 1 binds to the ribosome during translation initiation. It is instrumental for initiator-tRNA and mRNA binding, and has a function in selection of the authentic start codon. Here, we show that the archaeal homolog aIF1 has analogous functions. The aIF1 protein of the archaeon Sulfolobus solfataricus is bound to the small ribosomal subunit during translation initiation and accelerates binding of initiator-tRNA and mRNA to the ribosome. Accordingly, aIF1 stimulated translation of an mRNA in a S. solfataricus in vitro translation system. Moreover, this study suggested that the C terminus of the factor is of relevance for its function.     

Escherichia coli translation initiation factor 3 discriminates the initiation codon in vivo

In a genetic selection designed to isolate Escherichia coli mutations that increase expression of the IS 10 transposase gene ( tnp ), we unexpectedly obtained viable mutants defective in translation initiation factor 3 (IF3). Several lines of evidence led us to conclude that transposase expression, per se , was not increased. Rather, these mutations appear to increase expression of the tnp'–'lacZ gene fusions used in this screen, by increasing translation initiation at downstream, atypical initiation codons. To test this hypothesis we undertook a systematic analysis of start codon requirements and measured the effects of IF3 mutations on initiation from various start codons. Beginning with an efficient translation initiation site, we varied the AUG start codon to all possible codons that differed from AUG by one nucleotide. These potential start codons fall into distinct classes with regard to translation efficiency in vivo : Class I codons (AUG, GUG, and UUG) support efficient translation; Class IIA codons (CUG, AUU, AUC, AUA, and ACG) support translation at levels only 1–3% that of AUG; and Class IIB codons (AGG and AAG) permit levels of translation too low for reliable quantification. Importantly, the IF3 mutations had no effect on translation from Class I codons, but they increased translation from Class II codons 3–5-fold, and this same effect was seen in other gene contexts. Therefore, IF3 is generally able to discriminate between efficient and inefficient codons in vivo , consistent with earlier in vitro observations. We discuss these observations as they relate to IF3 autoregulation and the mechanism of IF3 function.     

Cell-cycle-specific initiation of replication

The following characteristics are relevant when replication of chromosomes and plasmids is discussed in relation to the cell cycle: the timing or replication, the selection of molecules for replication, and the coordination of multiple initiation events within a single cell cycle. Several fundamentally different methods have been used to study these processes: Meselson—Stahl density-shift experiments, experiments with the so-called‘baby machine', sorting of cells according to size, and flow cytometry. The evidence for precise timing and co-ordination of chromosome replication in Escherichia coli is overwhelming. Similarly, the high-copy-number plasmid ColE1 and the low-copy-number plasmids R1/R100 without any doubt replicate randomly throughout the cell cycle. Data about the low-copy-number plasmids F and P1 are conflicting. This calls for new types of experiments and for a better understanding of how these plasmids control their replication and partitioning.     

Optimal flight initiation distance

Decisions regarding flight initiation distance have received scant theoretical attention. A graphical model by Ydenberg and Dill (1986. The economics of fleeing from predators. Adv. Stud. Behav. 16, 229-249) that has guided research for the past 20 years specifies when escape begins. In the model, a prey detects a predator, monitors its approach until costs of escape and of remaining are equal, and then flees. The distance between predator and prey when escape is initiated (approach distance = flight initiation distance) occurs where decreasing cost of remaining and increasing cost of fleeing intersect. We argue that prey fleeing as predicted cannot maximize fitness because the best prey can do is break even during an encounter. We develop two optimality models, one applying when all expected future contribution to fitness (residual reproductive value) is lost if the prey dies, the other when any fitness gained (increase in expected RRV) during the encounter is retained after death. Both models predict optimal flight initiation distance from initial expected fitness, benefits obtainable during encounters, costs of escaping, and probability of being killed. Predictions match extensively verified predictions of Ydenberg and Dill's (1986) model. Our main conclusion is that optimality models are preferable to break-even models because they permit fitness maximization, offer many new testable predictions, and allow assessment of prey decisions in many naturally occurring situations through modification of benefit, escape cost, and risk functions.     

Plant cell culture initiation

The use of cultured plant cells in either organized or unorganized form has increased vey considerably in the last 10–15 yr. Many new technologies have been developed and applications in both fundamental and applied research have led to the development of some powerful tools for improving our knowledge of botanical systems and for gaining external influence over some of the key processes involved in inter-and intracellular organization. This is particularly the case when cell culture techniques are combined with those for the genetic modification of plant cells. Being able to regenerate whole plants that have gained or lost the expression of one or more specific genes has revolutionized the way in which we approach scientific questions and has opened up many additional possibilities for the molecular dissection of plants. The success or fall of all plant cell culture technologies lies with culture initiation. The choice of plant material, its physiologival state and cultivation history, the media used, and their means of preparation are just some of the factors that can greatly influence whether the desired end result will be achieved. In this article are described some of the practical aspects involved in successful plant cell culture initiation and the choices that have to be made. Attention is given to some of the pitfalls that can occur and how to avoid them. A good start is half the work     

Control of initiation of sporulation by replication initiation genes in Bacillus subtilis

Initiation of spore formation in Bacillus subtilis appears to depend on initiation of DNA replication. This regulation was first identified using a temperature-sensitive mutation in dnaB. We found that mutations in the replication initiation genes dnaA and dnaD also inhibit sporulation, indicating that inhibition of sporulation is triggered by general defects in the function of replication initiation proteins.     

An aptamer-based biosensor for mammalian initiation factor eukaryotic initiation factor 4A

Aptamers are short single-stranded DNA or RNA sequences that are selected in vitro based on their high affinity to a target molecule. Here we demonstrate that an RNA aptamer selected against eukaryotic initiation factor 4A (eIF4A) serves as an efficient biosensor. The aptamer, when immobilized to resin, purifies eIF4A from crude cell extracts by affinity pull-down, and ³²P-labeled aptamer can detect some 300 ng of eIF4A by dot-blot analysis. Moreover, by use of an aptamer-immobilized sensor chip, we developed a surface plasmon resonance assay to detect eIF4A at the nanogram level within whole cell lysates after optimizing sample preparation, thereby showing a real-time sensor for eIF4A in cell extract solution.     

Effect of polypeptide initiation factors on the spermidine stimulation of initiation complex formation

The AUG- and MS2 RNA-dependent fMet-tRNA binding to 30S ribosomal subunits was stimulated by spermidine with any individual or combination of initiation factors capable of participating in the formation of an initiation complex. When 70S ribosomes were used instead of 30S ribosomal subunits, IF-3 was necessary for spermidine stimulation of the complex formation.     

How initiation factors tune the rate of initiation of protein synthesis in bacteria

The kinetics of initiator transfer RNA (tRNA) interaction with the messenger RNA (mRNA)-programmed 30S subunit and the rate of 50S subunit docking to the 30S preinitiation complex were measured for different combinations of initiation factors in a cell-free Escherichia coli system for protein synthesis with components of high purity. The major results are summarized by a Michaelis-Menten scheme for initiation. All three initiation factors are required for maximal efficiency (kcat/KM) of initiation and for maximal in vivo rate of initiation at normal concentration of initiator tRNA. Spontaneous release of IF3 from the 30S preinitiation complex is required for subunit docking. The presence of initiator tRNA on the 30S subunit greatly increases the rate of 70S ribosome formation by increasing the rate of IF3 dissociation from the 30S subunit and the rate of 50S subunit docking to the IF3-free 30S preinitiation complex. The reasons why IF1 and IF3 are essential in E. coli are discussed in the light of the present observations.