基于生命周期方法的生活垃圾资源化利用系统生态效率分析

我国生活垃圾产量大但处理能力不足,产生多种环境危害,对其资源化利用能够缓解环境压力并回收资源。为探讨生活垃圾资源化利用策略,综合生命周期评价与生命周期成本分析方法,建立生态效率模型。以天津市为例,分析和比较焚烧发电、卫生填埋-填埋气发电、与堆肥+卫生填埋3种典型生活垃圾资源化利用情景的生态效率。结果表明,堆肥+卫生填埋情景具有潜在最优生态效率;全球变暖对总环境影响贡献最大,而投资成本对经济影响贡献最大。考虑天津市生活垃圾管理现状,建议鼓励发展生活垃圾干湿组分分离及厨余垃圾堆肥的资源化利用策略。     

Use of Incinerator Bottom Ash for Frit Production

This article presents the results of an experimental activity aimed at investigating the technical feasibility and the environmental performance of using municipal solid waste incineration bottom ash to produce glass frit for ceramic glaze (glaze frit). The process includes an industrial pretreatment of bottom ash that renders the material suitable for use in glaze frit production and allows recovery of aluminum and iron. The environmental performance of this treatment option is assessed with the life cycle assessment (LCA) methodology. The goal of the LCA study is to assess and compare the environmental impacts of two scenarios of end of life of bottom ash from municipal solid waste incineration (MSWI): landfill disposal (conventional scenario) and bottom ash recovery for glaze frit production (innovative scenario). The main results of the laboratory tests, industrial simulations, and LCA study are presented and discussed, and the environmental advantages of recycling versus landfill disposal are highlighted.     

Life cycle assessment of composite packaging waste management—a Chinese case study on aseptic packaging

Purpose

Approximately 46,000 t/day of packaging waste was generated in China in 2010, of which, 2,500 t was composite packaging waste. Due to the lack of recycling technology and an imperfect recovery system, most of this waste is processed in sanitary landfills. An effective packaging waste management system is needed since this waste not only uses up valuable resources, but also increases environmental pollution. The purpose of this study is to estimate the environmental impact of the treatment scenarios in composite packaging waste which are commonly used in China, to determine the optimum composite packaging waste management strategy, and to design new separating and recycling technology for composite packaging, based on the life cycle assessment (LCA) results.

Methods

To identify the best treatment for composite packaging waste, the LCA software SimaPro 7.1.6 was used to assist in the analysis of the environmental impacts, coupled with the impact assessment method Eco-Indicator 99. LCA for composite packaging waste management was carried out by estimating the environmental impacts of the four scenarios most often used in China: landfill, incineration, paper recycling, and separation of polyethylene and aluminum. One ton of post-consumption Tetra Pak waste was selected as the functional unit. The data on the mass, energy fluxes, and environmental emissions were obtained from literature and site investigations.

Results and discussion

Landfill—scenario 1—was the worst waste management option. Paper recycling—scenario 3—was more environmentally friendly than incineration, scenario 2. Scenario 4, separating out polyethylene and aluminum, was established based on the LCA result, and inventory data were obtained from the demonstration project built by this research. In scenario 4, the demonstration project for the separation of polyethylene and aluminum was built based on the optimum conditions from single-factor and orthogonal experiments. Adding this flow process into the life cycle of composite packaging waste treatment decreased the environmental impacts significantly.

Conclusions

The research results can provide useful scientific information for policymakers in China to make decisions regarding composite packaging waste. Incineration could reduce more environmental impacts in the respiratory inorganics category, and separation of polyethylene and aluminum, in the fossil fuel category. If energy saving is the primary governmental goal, the separation of polyethylene and aluminum would be the better choice, while incineration would be the better choice for emission reduction.     

Coupling Input‐Output Tables with Macro‐Life Cycle Assessment to Assess Worldwide Impacts of Biofuels Transport Policies

Many countries see biofuels as a replacement to fossil fuels to mitigate climate change. Nevertheless, some concerns remain about the overall benefits of biofuels policies. More comprehensive tools seem required to evaluate indirect effects of biofuel policies. This article proposes a method to evaluate large‐scale biofuel policies that is based on life cycle assessment (LCA), environmental extensions of input‐output (I‐O) tables, and a general equilibrium model. The method enables the assessment of indirect environmental effects of biofuels policies, including land‐use changes (LUCs), in the context of economic and demographic growth. The method is illustrated with a case study involving two scenarios. The first one describes the evolution of the world economy from 2006 to 2020 under business as usual (BAU) conditions (including demographic and dietary preferences changes), and the second integrates biofuel policies in the United States and the European Union (EU). Results show that the biofuel scenario, originally designed to mitigate climate change, results in more greenhouse gas emissions when compared to the BAU scenario. This is mainly due to emissions associated with global LUCs. The case study shows that the method enables a broader consideration for environmental effects of biofuel policies than usual LCA: Global economic variations calculated by a general equilibrium economic model and LUC emissions can be evaluated. More work is needed, however, to include new biofuel production technologies and reduce the uncertainty of the method.     

Combining Material Flow Analysis,Life Cycle Assessment,and Multiattribute Utility Theory

Three assessment methods, material flow analysis (MFA), life cycle analysis (LCA), and multiattribute utility theory (MAUT) are systematically combined for supporting the choice of best end‐of‐life scenarios for polyethylene terephthalate (PET) waste in a municipality of a developing country. MFA analyzes the material and energy balance of a firm, a region, or a nation, identifying the most relevant processes; LCA evaluates multiple environmental impacts of a product or a service from cradle to grave; and MAUT allows for inclusion of other aspects along with the ecological ones in the assessment. We first systematically coupled MFA and LCA by defining “the service offered by the total PET used during one year in the region” as the functional unit. Inventory and impacts were calculated by multiplying MFA flows with LCA impacts per kilogram. We used MAUT to include social and economic aspects in the assessment. To integrate the subjective point of view of stakeholders in the MAUT, we normalized the environmental, social, and economic variables with respect to the magnitude of overall impacts or benefits in the country. The results show large benefits for recycling scenarios from all points of view and also provide information about waste treatment optimization. The combination of the three assessment methods offers a powerful integrative assessment of impacts and benefits. Further research should focus on data collection methods to easily determine relevant material flows. LCA impact factors specific to Colombia should be developed, as well as more reliable social indicators.     

Measuring and Improving Eco‐efficiency Using Data Envelopment Analysis

The concept of eco‐efficiency can be defined with the “product value/environmental influence” ratio. Different models have been proposed to measure eco‐efficiency. The main difference among them is the weighting system used to aggregate the environmental results. Data envelopment analysis (DEA) permits this aggregation without requiring a subjective judgment about the weights. In this study, we applied a DEA model to Spanish Mahón‐Menorca cheese production to determine the most eco‐efficient production techniques. To this end, 16 scenarios of Mahón‐Menorca cheese production were built regarding technical (degree of automation) and cleaner production criteria. The environmental impacts were assessed by means of life cycle assessment. We carried out an economic assessment by determining the economic value added and the net income for each scenario. The results are referred to as 1 kilogram (kg) cheese ripened over 105 days. Through DEA, an eco‐efficiency ratio between 0 and 1 was obtained. Three scenarios were found to be eco‐efficient, with a high degree of automation (enclosed vat and molding and demolding machines) and accelerated cheese ripening. We used Monte Carlo simulation to carry out a sensitivity analysis to compare the influence of price changes on the eco‐efficiency ratio. The results emphasize the consistency and stability of the eco‐efficient scenarios.     

Discussion on methods to include prevention activities in waste management LCA

Purpose

Waste prevention has been assigned increasing attention worldwide during recent years, and it is expected to become one of the core elements of waste management planning in the near future. In this framework, this paper presents and discusses two possible LCA approaches for the evaluation of the environmental and energetic performance of municipal solid waste (MSW) management systems which include the effects of waste prevention activities.

Methods

The two approaches are conceived for the comparison of waste management scenarios including waste prevention activities with baseline scenarios without waste prevention. For both of them, the functional unit is defined and the system boundaries are described with reference to different typologies of waste prevention activities identified in an extensive review. The procedure for the calculation of the LCA impacts of scenarios is also reported and an example illustrating the processes to be included in system boundaries for a specific waste prevention activity is provided.

Results and discussion

The presented approaches lead to the same result in terms of difference between the LCA impacts of a waste prevention scenario and of a baseline one. However, because of the partially different upstream system boundaries, different values of the impacts of single scenarios are obtained and the application of the two approaches is more suitable in different situations and in analyses with different purposes. The methodological aspects that can complicate the applicability of the two approaches are discussed lastly.

Conclusions

The environmental and energetic performance of MSW management scenarios including waste prevention activities can be evaluated with the two LCA approaches presented in this paper. They can be used for many purposes such as, among the most general, evaluating the upstream and downstream environmental consequences of implementing particular waste prevention activities in a given waste management system, complementing waste reduction indicators with LCA-based indicators and supporting with quantitative evidence the strategic and policy relevance of waste prevention.     

Application of a Life Cycle Model for European Union Policy‐Driven Waste Management Decision Making in Emerging Economies

Solid waste life cycle modeling has predominantly focused on developed countries, but there are significant opportunities to assist developing and transition economies to minimize the environmental impact of solid waste management (SWM). Serbia is representative of a transition country and most (92%) of its waste is landfilled. As a Candidate European Union (EU) country, Serbia is expected to implement SWM strategies that meet EU directives. The Solid Waste Life‐Cycle Optimization Framework (SWOLF) was used to evaluate scenarios that meet EU goals by 2030. Scenarios included combinations of landfills, anaerobic digestion, composting, material recovery facilities (MRFs), waste‐to‐energy (WTE) combustion, and the use of refuse‐derived fuel in cement kilns. Each scenario was evaluated with and without separate collection of recyclables. Modeled impacts included cost, climate change, cumulative fossil energy demand, acidification, eutrophication, photochemical oxidation, total eco‐toxicity, and total human toxicity. Trade‐offs among the scenarios were evaluated because no scenario performed best in every category. In general, SWM strategies that incorporated processes that recover energy and recyclable materials performed well across categories, whereas scenarios that did not include energy recovery performed poorly. Emissions offsets attributable to energy recovery and reduced energy requirements associated with remanufacturing of recovered recyclables had the strongest influence on the results. The scenarios rankings were robust under parametric sensitivity analysis, except when the marginal electricity fuel source changed from coal to natural gas. Model results showed that the use of existing infrastructure, energy recovery, and efficient recovery of recyclables from mixed waste can reduce environmental emissions at relatively low cost.     

Comparison of Plastic Packaging Waste Management Options: Feedstock Recycling versus Energy Recovery in Germany

Plastics recycling, especially as prescribed by the German Ordinance on Packaging Waste (Verpackungsverordnung), is a conspicuous example of closing material loops on a large scale. In Germany, an industry‐financed system (Duales System Deutschland) was established in 1991 to collect and recycle packaging waste from households. To cope with mixed plastics, various “feedstock‐recycling” processes were developed. We discuss the environmental benefits and the cost‐benefit ratio of the system relative to municipal solid waste (MSW) incineration, based on previously published life‐cycle assessment (LCA) studies. Included is a first‐time investigation of energy recovery in all German incinerators, the optimization opportunities, the impact on energy production and substitution processes, an estimation of the costs, and a cost‐benefit assessment. In an LCA, the total environmental impact of MSW incineration is mainly determined by the energy recovery ratio, which was found on average to reach 39% in current German incineration plants. Due to low revenues from additional energy generation, it is not cost‐effective to optimize the plants energetically. Energy from plastic incineration substitutes for a specific mixture of electric base‐load power, district heating, and process steam generation. Any additional energy from waste incineration will replace, in the long term, mainly natural gas, rather than coal. Incineration of plastic is compared with feedstock recycling methods in different scenarios. In all scenarios, the incineration of plastic leads to an increase of CO2 emissions compared to landfill, whereas feedstock recycling reduces CO2 emissions and saves energy resources. The costs of waste incineration are assumed to decrease by about 30% in the medium term. Today, the calculated costs of CO2 reduction in feedstock recycling are very high, but are ex‐pected to decline in the near future. Relative to incineration, the costs for conserving energy via feedstock recycling are 50% higher, but this gap will close in the near future if automatic sorting and processing are implemented in Germany.     

LCA application to integrated waste management planning in Gipuzkoa (Spain)

Goal, Scope and Background  Gipuzkoa is a department of the Vasque Country (Spain) with a population of about 700,000 people. By the year 2000 approximately 85% of municipal solid waste in this area was managed by landfilling, and only 15% was recycled. Due to environmental law restrictions and landfill capacity being on its limit, a planning process was initiated by the authorities. LCA was used, from an environmental point of view, to assess 7 possible scenarios arising from the draft Plan for the 2016 time horizon. Main Features  In each scenario, 9 waste flows are analysed: rest waste, paper and cardboard, glass containers, light packaging, organic-green waste, as well as industrial/commercial wood, metals and plastics, and wastewater sludge. Waste treatments range from recycling to energy recovery and landfilling. Results  Recycling of the waste flows separated at the source (paper and cardboard, glass, light packaging, organic-green waste, wood packaging, metals and plastics) results in net environmental benefits caused by the substitution of primary materials, except in water consumption. These benefits are common to the 7 different scenarios analysed. However, some inefficiencies are detected, mainly the energy consumption in collection and transport of low density materials, and water consumption in plastic recycling. The remaining flows, mixed waste and wastewater sludge, are the ones causing the major environmental impacts, by means of incineration, landfilling of partially stabilised organic material, as well as thermal drying of sludge. With the characterisation results, none of the seven scenarios can be clearly identified as the most preferable, although, due to the high recycling rates expected by the Plan, net environmental benefits are achieved in 9 out of 10 impact categories in all scenarios when integrated waste management is assessed (the sum of the 9 flows of waste). Finally, there are no relevant differences between scenarios concerning the number of treatment plants considered. Nevertheless, only the effects on transportation impacts were assessed in the LCA, since the plant construction stage was excluded from the system boundaries. Conclusions  The results of the study show the environmental importance of material recycling in waste management, although the recycling schemes assessed can be improved in some aspects. It is also important to highlight the environmental impact of incineration and landfilling of waste, as well as thermal drying of sludge using fossil fuels. One of the main findings of applying LCA to integrated waste management in Gipuzkoa is the fact that the benefits of high recycling rates can compensate for the impacts of mixed waste and wastewater sludge. Recommendations and Outlook  Although none of the scenarios can be clearly identified as the one having the best environmental performance, the authorities in Gipuzkoa now have objective information about the future scenarios, and a multidisciplinary panel could be formed in order to weight the impacts if necessary. In our opinion, LCA was successfully applied in Gipuzkoa as an environmental tool for decision making.     

Environmental impact and cost assessment of incineration and ethanol production as municipal solid waste management strategies

Purpose

Municipal solid waste (MSW) can be handled with several traditional management strategies, including landfilling, incineration, and recycling. Ethanol production from MSW is a novel strategy that has been proposed and researched for practical use; however, MSW ethanol plants are not widely applied in practice. Thus, this study has been conducted to analyze and compare the environmental and economic performance of incineration and ethanol production as alternatives to landfilling MSW.

Methods

The ISO 14040 life cycle assessment framework is employed to conduct the environmental impact assessment of three different scenarios for the two MSW management strategies based on processing 1 ton of MSW as the functional unit. The first scenario models the process of incinerating MSW and recovering energy in the form of process heat; the second scenario also includes the process of incinerating MSW but yields in the recovery of energy in the form of electricity; and the third scenario models the process of converting MSW into ethanol. The economic impacts of each scenario are then assessed by performing benefit-to-cost ratio (BCR) and net present value (NPV) analyses.

Results and discussion

The results from the environmental impact assessment of each scenario reveal that scenario 2 has the highest benefits for resource availability while scenario 3 is shown to be the best alternative to avoid human health and ecosystems diversity impacts. Scenario 1 has the worst environmental performance with respect to each of these environmental endpoint indicators and has net environmental impacts. The results of the economic analysis indicate that the third scenario is the best option with respect to BCR and NPV, followed by scenarios 2 and 1, respectively. Furthermore, environmental and economic analysis results are shown to be sensitive to MSW composition.

Conclusions

It appears municipalities should prefer MSW incineration with electricity generation or MSW-to-ethanol conversion over MSW incineration with heat recovery as an alternative to landfilling. The contradiction between the environmental impact assessment results and economic analysis results demonstrates that the decision-making process is sensitive to a broad set of variables. Decisions for a specific MSW management system are subject to facility location and size, MSW composition, energy prices, and governmental policies.     

Absolute versus Relative Environmental Sustainability

The cradle‐to‐cradle (C2C) concept has emerged as an alternative to the more established eco‐efficiency concept based on life cycle assessment (LCA). The two concepts differ fundamentally in that eco‐efficiency aims to reduce the negative environmental footprint of human activities while C2C attempts to increase the positive footprint. This article discusses the strengths and weaknesses of each concept and suggests how they may learn from each other. The eco‐efficiency concept involves no long‐term vision or strategy, the links between resource consumption and waste emissions are not well related to the sustainability state, and increases in eco‐efficiency may lead to increases in consumption levels and hence overall impact. The C2C concept's disregard for energy efficiency means that many current C2C products will likely not perform well in an LCA. Inherent drawbacks are restrictions on the development of new materials posed by the ambition of continuous loop recycling, the perception that human interactions with nature can benefit all parts of all ecosystems, and the hinted compatibility with continued economic growth. Practitioners of eco‐efficiency can benefit from the visions of C2C to avoid a narrow‐minded focus on the eco‐efficiency of products that are inherently unsustainable. Moreover, resource efficiency and positive environmental effects could be included more strongly in LCA. Practitioners of C2C on the other hand should recognize the value of LCA in addressing trade‐offs between resource conservation and energy use. Also, when designing a “healthy emission” it should be recognized that it will often have an adverse effect on parts of the exposed ecosystem.     

生命周期评价方法在城市生活垃圾管理中的应用研究述评

结合城市生活垃圾管理系统特征,系统归纳基于生命周期评价(Life cycle assessment,LCA)方法的城市生活垃圾管理模型的发展现状,并对LCA方法在城市生活垃圾管理中的实践以及在我国开展城市生活垃圾管理LCA研究的应用前景进行评述。分析表明,LCA是城市生活垃圾管理领域的重要工具之一,基于LCA方法的城市生活垃圾管理模型在全生命周期环境影响评价与识别、处置工艺选择与改进、可持续生活垃圾管理决策支持等方面具有十分重要的应用价值。中国在本地化生活垃圾管理系统LCA模型开发、清单数据库和评价指标体系构建以及与其他研究方法集成等方面面临挑战。     

Life Cycle Assessment of End‐of‐Life Management Options for Construction and Demolition Debris

A life cycle assessment (LCA) of various end‐of‐life management options for construction and demolition (C&D) debris was conducted using the U.S. Environmental Protection Agency's Municipal Solid Waste Decision Support Tool. A comparative LCA evaluated seven different management scenarios using the annual production of C&D debris in New Hampshire as the functional unit. Each scenario encompassed C&D debris transport, processing, separation, and recycling, as well as varying end‐of‐life management options for the C&D debris (e.g., combustion to generate electricity versus landfilling for the wood debris stream and recycling versus landfilling for the nonwood debris stream) and different bases for the electricity generation offsets (e.g., the northeastern U.S. power grid versus coal‐fired power generation). A sensitivity analysis was also conducted by varying the energy content of the C&D wood debris and by examining the impact of basing the energy offsets on electricity generated from various fossil fuels. The results include impacts for greenhouse gas (GHG) emissions, criteria air pollutants, ancillary solid waste production, and organic and inorganic constituents in water emissions. Scenarios with nonwood C&D debris recycling coupled with combustion of C&D wood debris to generate electricity had lower impacts than other scenarios. The nonwood C&D debris recycling scenarios where C&D wood debris was landfilled resulted in less overall impact than the scenarios where all C&D debris was landfilled. The lowest impact scenario included nonwood C&D debris recycling with local combustion of the C&D wood debris to generate electricity, providing a net gain in energy production of more than 7 trillion British thermal units (BTU) per year and a 130,000 tons per year reduction in GHG emissions. The sensitivity analysis revealed that for energy consumption, the model is sensitive to the energy content of the C&D wood debris but insensitive to the basis for the energy offset, and the opposite is true for GHG emissions.     

Life‐cycle and cost of goods assessment of fed‐batch and perfusion‐based manufacturing processes for mAbs

Life‐cycle assessment (LCA) is an environmental assessment tool that quantifies the environmental impact associated with a product or a process (e.g., water consumption, energy requirements, and solid waste generation). While LCA is a standard approach in many commercial industries, its application has not been exploited widely in the bioprocessing sector. To contribute toward the design of more cost‐efficient, robust and environmentally‐friendly manufacturing process for monoclonal antibodies (mAbs), a framework consisting of an LCA and economic analysis combined with a sensitivity analysis of manufacturing process parameters and a production scale‐up study is presented. The efficiency of the framework is demonstrated using a comparative study of the two most commonly used upstream configurations for mAb manufacture, namely fed‐batch (FB) and perfusion‐based processes. Results obtained by the framework are presented using a range of visualization tools, and indicate that a standard perfusion process (with a pooling duration of 4 days) has similar cost of goods than a FB process but a larger environmental footprint because it consumed 35% more water, demanded 17% more energy, and emitted 17% more CO₂ than the FB process. Water consumption was the most important impact category, especially when scaling‐up the processes, as energy was required to produce process water and water‐for‐injection, while CO₂ was emitted from energy generation. The sensitivity analysis revealed that the perfusion process can be made more environmentally‐friendly than the FB process if the pooling duration is extended to 8 days. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1324–1335, 2016     

An Input‐Output Model of Extended Producer Responsibility

Under an extended producer responsibility (EPR) system, when a producer delivers a product to the market it must also pay a takeback fee, which is used to cover the costs of end‐of‐life disposal. EPR systems are currently used in Europe and beyond to manage a variety of products, including packaging and used tires. In this article we develop an input‐output (IO) model that is able to assess the impacts of an EPR system, and is based on the waste IO (WIO) model. The WIO model is itself a hybrid‐unit model extension of the Leontief model that is able to capture the substitution effect between recycled/recovered material/energy from waste treatment and their non‐waste cognates. The resulting EPRIO model, besides the conventional direct and indirect effects of the Leontief model and the substitution effects of the WIO model, is able to capture the opportunity costs of financing the EPR system, and additionally requires the specification of an alternative waste management policy, with its own opportunity costs. The impact of an EPR policy is thus the difference between the impacts of the reference EPR and the alternative waste treament policies. The resulting model is illustrated with a simple example of a used tire management EPR system.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.     

Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study

Three‐dimensional (3D) printing and geo‐polymers are two environmentally oriented innovations in concrete manufacturing. The 3D printing of concrete components aims to reduce raw material consumption and waste generation. Geo‐polymer is being developed to replace ordinary Portland cement and reduce the carbon footprint of the binder in the concrete. The environmental performance of the combined use of the two innovations is evaluated through an ex‐ante life cycle assessment (LCA). First, an attributional LCA was implemented, using data collected from the manufacturer to identify the hotspots for environmental improvements. Then, scaled‐up scenarios were built in collaboration with the company stakeholder. These scenarios were compared with the existing production system to understand the potential advantages/disadvantages of the innovative system and to identify the potential directions for improvement. The results indicate that 3D printing can potentially lead to waste reduction. However, depending on its recipe, geo‐polymer likely has higher environmental impacts than ordinary concrete. The ex‐ante LCA suggests that after step‐by‐step improvements in the production and transportation of raw materials, 3D printing geo‐polymer concrete is able to reduce the carbon footprint of concrete components, while it does still perform worse on impact categories, such as depletion of abiotic resources and stratospheric ozone depletion. We found that the most effective way to lower the environmental impacts of 3D concrete is to reduce silicate in the recipe of the geo‐polymer. This approach is, however, challenging to realize by the company due to the locked‐in effect of the previous innovation investment. The case study shows that to support technological innovation ex‐ante LCA has to be implemented as early as possible in innovation to allow for maintaining technical flexibility and improving on the identified hotspots.     

Life Cycle Assessment of a Personal Computer and its Effective Recycling Rate (7 pp)

Background, Aims and Scope Telecommunication and information technology, dramatically emerged during the last decade, has generated environmental problems by accelerating mass production, mass consumption, and mass disposal of personal computers (PCs) in Korea. In addition, it has led the Korean new economy. The Korean government has encouraged researchers and industry to study the environmental impact, adequate disposal treatment, and the reasonable recycling rate of an end-of-life personal computer. The main purpose of this research is to investigate the life cycle environmental impact of PCs and to determine the desirable or feasible recycle rate of an end-of-life PC. An LCA on a PC was performed based on different recycling scenario. Target audiences are new product developers, designers, product recovery managers and environmental policy makers who are interested in the environmental impact of PCs and recycling of end-of-life products. Methods A target product is a Pentium IV personal computer made in Korea in 2001, excluding the monitor and peripheral equipment. The procedure of the LCA followed the ISO14040 series. System boundary includes the entire life cycle of the product, including pre-manufacturing (the electrical parts and components manufacturing), manufacturing, transportation, use, and disposal. The LCI and impact assessment database for a PC was constructed using SIMAPRO version 4.0 software and LCI information was compiled by site-specific data and the Korean national database. The LCA was performed on different recycling scenarios: one being that of the current recycling rate of 46%, and the other being the ideal condition of a 100% recycling rate. Results and Discussion Abiotic depletion, global warming, ecotoxicity, human toxicity, acidification, ozone layer depletion, photo-oxidant formation, and eutrophication are adopted as the impact categories. The pre-manufacturing stage was a significant stage for all of the environmental parameters, besides human toxicity potential. PC manufacturing consists of rather simple processes such as assembly and packaging. For improving the environmental performance of PCs, environmental management approaches of design for the environment and green procurement are recommended. The use stage had a significant potential due to the electricity consumption produced by burning fossil fuel. The disposal stage's contribution to environmental impact was largest in human toxicity, and second largest in ozone layer depletion potential. The PC recycling was shown to inhibit all environmental impacts with the exception of the ozone depletion and ecotoxicity potential. The increase of light oil, nitric acid, sulfuric acid, and deoxidating agent consumption during the recycling process contributes to the environmental impact of ozone and ecotoxicity parameters. Current recovery and recycling technologies should be taken into account for enhancing the benefits of recycling. Anyway, the effectiveness of recycling was highlighted by this study. PC recycling reduces the total environmental impact of the product. The PC recycling is recommended to be raised up to at least 63% in order to reduce the environmental burdens of a PC in other life cycle stages. Conclusion and Recommendation This study implies that design for the environment (DfE) in the product design stage and green procurement are recommended for improving the entire environmental performance of electronic equipment such as PCs. The recycling of waste PCs clearly reduces the environmental burden. There are, however, trade-offs among environmental parameters according to the PC recycling rate. Current recycling methods are not effective in reducing ozone depletion and ecotoxicity environmental impact. The product recovery is another key for efficient recycling. Efficient reverse logistics to collect and transport end-of-life PCs should be taken into account to enhance recycling effects. There were several electrical parts not included in this assessment, due to the unavailability of adequate data. Further studies with more detail and reliable inventories for electrical parts and sub-components are recommended. Furthermore, costs of recycling should also be treated in further research.