Spa32 regulates a switch in substrate specificity of the type III secreton of Shigella flexneri from needle components to Ipa proteins

Type III secretion systems (TTSS) are essential virulence determinants of many gram-negative bacteria and serve, upon physical contact with target cells, to translocate bacterial proteins directly across eukaryotic cell membranes. The Shigella TTSS is encoded by the mxi/spa loci located on its virulence plasmid. By electron microscopy secretons are visualized as tripartite with an external needle, a transmembrane domain, and a cytoplasmic bulb. In the present study, we generated a Shigella spa32 mutant and studied its phenotype. The spa32 gene shows low sequence homology to Salmonella TTSS1 invJ/spaN and to flagellar fliK. The spa32 mutant, like the wild-type strain, secreted the Ipas and IpgD, which are normally secreted via the TTSS, at low levels into the growth medium. However, unlike the wild-type strain, the spa32 mutant could neither be induced to secrete the Ipas and IpgD instantaneously upon addition of Congo red nor penetrate HeLa cells in vitro. Additionally, the Spa32 protein is secreted in large amounts by the TTSS during exponential growth but not upon Congo red induction. Interestingly, electron microscopy analysis of the spa32 mutant revealed that the needle of its secretons were up to 10 times longer than those of the wild type. In addition, in the absence of induction, the spa32 mutant secreted normal levels of MxiI but a large excess of MxiH. Taken together, our data indicate that the spa32 mutant presents a novel phenotype and that the primary defect of the mutant may be its inability to regulate or control secretion of MxiH.     

Spa32 interaction with the inner‐membrane Spa40 component of the type III secretion system of Shigella flexneri is required for the control of the needle length by a molecular tape measure mechanism

The effectors of enterocyte invasion by Shigella are dependent on a type III secretion system that contains a needle whose length average does not exceed 50 nm. Previously, we reported that Spa32 is required for needle length control as well as to switch substrate specificity from MxiH to Ipa proteins secretion. To identify functional domains of Spa32, 11 truncated variants were constructed and analysed for their capacity (i) to control the needle's length; (ii) to secrete the Ipa proteins; and (iii) to invade HeLa cells. Deletion at either the N‐terminus or C‐terminus affect Spa32 function in all cases, but Spa32 variants lacking internal residues 37–94 or 130–159 retained full Spa32 function. Similarly, a Spa32 variant obtained by inserting of the YscP's ruler domain retained Spa32 function although it programmed slightly elongated needles. Using the GST pull‐down assay, we show that residues 206–246 are required for Spa32 binding to the C‐terminus of Spa40, an inner membrane protein required for Ipa proteins secretion. Our data clearly demonstrate that shortening Spa32 affects the length of the needle in a comparable manner to the spa32 mutant, indicating that the control of needle length does not require a molecular ruler mechanism.     

Supramolecular structure of the Shigella type III secretion machinery: the needle part is changeable in length and essential for delivery of effectors

We investigated the supramolecular structure of the SHIGELLA: type III secretion machinery including its major components. Our results indicated that the machinery was composed of needle and basal parts with respective lengths of 45.4 +/- 3.3 and 31.6 +/- 0.3 nm, and contained MxiD, MxiG, MxiJ and MxiH. spa47, encoding a putative F(1)-type ATPase, was required for the secretion of effector proteins via the type III system and was involved in the formation of the needle. The spa47 mutant produced a defective, needle-less type III structure, which contained MxiD, MxiG and MxiJ but not MxiH. The mxiH mutant produced a defective type III structure lacking the needle and failed to secrete effector proteins. Upon overexpression of MxiH in the mxiH mutant, the bacteria produced type III structures with protruding dramatically long needles, and showed a remarkable increase in invasiveness. Our results suggest that MxiH is the major needle component of the type III machinery and is essential for delivery of the effector proteins, and that the level of MxiH affects the length of the needle.     

MxiK and MxiN interact with the Spa47 ATPase and are required for transit of the needle components MxiH and MxiI,but not of Ipa proteins,through the type III secretion apparatus of Shigella flexneri

The type III secretion (TTS) pathway is used by numerous Gram-negative pathogens to inject virulence factors into eukaryotic cells. The Shigella flexneri TTS apparatus (TTSA) spans the bacterial envelope and its assembly requires the products of approximately 20 mxi and spa genes. We present a functional analysis of the mxiK, mxiN and mxiL genes. Inactivation of mxiK and mxiN, but not mxiL, resulted in the assembly of a non-functional TTSA that lacked the outer needle. The amounts of needle components MxiH and MxiI were drastically reduced in mxiK and mxiN mutants and in the secretion defective spa47 mutant, indicating that MxiH and MxiI are degraded if they do not transit through the TTSA. Remarkably, expression of MxiH-His in the mxiN mutant and MxiI-His in the mxiK mutant restored assembly of a functional TTSA, as shown by the ability of these strains to enter into epithelial cells and to secrete Ipa proteins in response to activation by Congo red. Using a two-hybrid screen in yeast and immunoprecipitation assays from S. flexneri extracts, we identified interactions between MxiK and Spa33 and Spa47 and between MxiN and Spa33 and Spa47. These results suggest that transit of the needle components MxiH and MxiI through the TTSA involves the concerted action of the cytoplasmic proteins Spa47, Spa33, MxiK and MxiN. They also show that neither MxiK nor MxiN are absolutely required for secretion of Ipa proteins, provided that the TTSA is correctly assembled.     

Shigella Spa33 is an essential C-ring component of type III secretion machinery

Type III secretion machinery (TTSM), composed of a needle, a basal body, and a C-ring compartment, delivers a subset of effectors into host cells. Here, we show that Shigella Spa33 is an essential component of the C-ring compartment involved in mediating the transit of various TTSM-associated translocated proteins. Electron microscopic analysis and pull-down assay revealed Spa33 to be localized beneath the TTSM via interaction with MxiG and MxiJ (basal body components). Spa33 is also capable of interacting with Spa47 (TTSM ATPase), MxiK, MxiN (required for the transit of MxiH, the needle component), Spa32 (required for determining needle length), and several effectors. Genetic and functional analyses of the Spa33 C-terminal region, which is highly conserved in the SpaO-YscQ-HrcQ(B)-FliN family, indicate that some of the conserved residues are crucial for needle formation via interactions with MxiN. Thus, Spa33 plays a central role as the C-ring component in recruiting/exporting TTSM-associated proteins.     

Molecular and functional analysis of the type III secretion signal of the Salmonella enterica InvJ protein

Central to the pathogenicity of Salmonella enterica is the function of a type III secretion system (TTSS) encoded within a pathogenicity island at centisome 63 (SPI-1). An essential component of this system is a supramolecular structure termed the needle complex. Proteins to be delivered into host cells possess specific signals that route them to the type III secretion pathway. In addition, some bacterial proteins have signals that deliver them to the secretion complex to either become their structural components or exert their function at that location. One of these proteins is InvJ, which controls the length of the needle substructure of the needle complex. In this study, we have analysed the signal that targets InvJ to the TTSS. We found that amino acid residues 4 to 7 of InvJ are necessary and sufficient to mediate secretion of InvJ or a reporter protein in a TTSS-dependent manner. InvJ secretion was found to be essential for its function in needle length determination, effector protein secretion and bacterial invasion of epithelial cells. Frameshift mutagenesis analysis indicated that the InvJ type III secretion signal sequence tolerates significant alterations in its amino acid sequence without affecting InvJ secretion. Introduction of silent mutations in the secretion signal coding sequence that result in drastically different predicted mRNA folds had no effect on InvJ secretion or expression.     

The needle component of the type III secreton of Shigella regulates the activity of the secretion apparatus

Gram-negative bacteria commonly interact with eukaryotic host cells by using type III secretion systems (TTSSs or secretons). TTSSs serve to transfer bacterial proteins into host cells. Two translocators, IpaB and IpaC, are first inserted with the aid of IpaD by Shigella into the host cell membrane. Then at least two supplementary effectors of cell invasion, IpaA and IpgD, are transferred into the host cytoplasm. How TTSSs are induced to secrete is unknown, but their activation appears to require direct contact of the external distal tip of the apparatus with the host cell. The extracellular domain of the TTSS is a hollow needle protruding 60 nm beyond the bacterial surface. The monomeric unit of the Shigella flexneri needle, MxiH, forms a superhelical assembly. To probe the role of the needle in the activation of the TTSS for secretion, we examined the structure-function relationship of MxiH by mutagenesis. Most point mutations led to normal needle assembly, but some led to polymerization or possible length control defects. In other mutants, secretion was constitutively turned "on." In a further set, it was "constitutively on" but experimentally "uninducible." Finally, upon induction of secretion, some mutants released only the translocators and not the effectors. Most types of mutants were defective in interactions with host cells. Together, these data indicate that the needle directly controls the activity of the TTSS and suggest that it may be used to "sense" host cells.     

Physical characterization of MxiH and PrgI, the needle component of the type III secretion apparatus from Shigella and Salmonella

Shigella and Salmonella use similar type III secretion systems for delivering effector proteins into host cells. This secretion system consists of a base anchored in both bacterial membranes and an extracellular "needle" that forms a rod-like structure exposed on the pathogen surface. The needle is composed of multiple subunits of a single protein and makes direct contact with host cells to facilitate protein delivery. The proteins that make up the needle of Shigella and Salmonella are MxiH and PrgI, respectively. These proteins are attractive vaccine candidates because of their essential role in virulence and surface exposure. We therefore isolated, purified, and characterized the monomeric forms of MxiH and PrgI. Their far-UV circular dichroism spectra show structural similarities with hints of subtle differences in their secondary structure. Both proteins are highly helical and thermally unstable, with PrgI having a midpoint of thermal unfolding (Tm) near 37 degrees C and MxiH having a value near 42 degrees C. The two proteins also have comparable intrinsic stabilities as measured by chemically induced (urea) unfolding. MxiH, however, with a free energy of unfolding (DeltaG degrees 0,un) of 1.6 kcal/mol, is slightly more stable than PrgI (1.2 kcal/mol). The relatively low m-values obtained for the urea-induced unfolding of the proteins suggest that they undergo only a small change in solvent-accessible surface area. This argues that when MxiH and PrgI are incorporated into the needle complex, they obtain a more stable structural state through the introduction of protein-protein interactions.     

Role of EscF, a putative needle complex protein, in the type III protein translocation system of enteropathogenic Escherichia coli

Type III secretion systems, designed to deliver effector proteins across the bacterial cell envelope and the plasma membrane of the target eukaryotic cell, are involved in subversion of eukaryotic cell functions in a variety of human, animal and plant pathogens. In enteropathogenic Escherichia coli (EPEC), several protein substrates for the secretion apparatus were identified, including EspA, EspB and EspD. EspA is a structural protein and the major component of a large transiently expressed filamentous surface organelle that forms a direct link between the bacterium and the host cell, whereas EspD and EspB seem to form the mature translocation pore. Recent studies of the type III secretion systems of Shigella and Salmonella pathogenicity island (SPI)-1 revealed the existence of a macromolecular complex that spans both bacterial membranes and consists of a basal structure with two upper and two lower rings and a needle-like projection that extends outwards from the bacterial surface. MxiH ( Shigella ) and PrgI ( Salmonella ) are the main components of the needle of the type III secretion complex. A needle-like complex has not yet been reported in EPEC. In this study, we investigated EscF, a protein sharing sequence similarity with MxiH and PrgI. We report that EscF is required for type III protein secretion and EspA filament assembly. Moreover, we show that EscF binds EspA, suggesting that EspA filaments are an extension of the type III secretion needle complexes in EPEC.     

Shigella deliver an effector protein to trigger host microtubule destabilization,which promotes Rac1 activity and efficient bacterial internalization

Shigella deliver a subset of effectors into the host cell via the type III secretion system, that stimulate host cell signal pathways to modulate the actin dynamics required for invasion of epithelial cells. Here we show that one of the Shigella effectors, called VirA, can interact with tubulin to promote microtubule (MT) destabilization, and elicit protrusions of membrane ruffling. Under in vitro conditions, VirA inhibited polymerization of tubulin and stimulated MT destabilization. Upon microinjection of VirA into HeLa cells, a localized membrane ruffling was induced rapidly. Overexpression of VirA in host cells caused MT destruction and protruding membrane ruffles which were absent when VirA was co-expressed with a dominant-negative Rac1 mutant. Indeed, Shigella but not the virA mutant stimulated Rac1, including the formation of membrane ruffles in infected cells. Importantly, the MT structure beneath the protruding ruffling was destroyed. Furthermore, drug-induced MT growth in HeLa cells greatly enhanced the Shigella entry. These results indicate that VirA is a novel type of bacterial effector capable of inducing membrane ruffling through the stimulation of MT destabilization.     

A Repulsive Electrostatic Mechanism for Protein Export through the Type III Secretion Apparatus

Many Gram-negative bacteria initiate infections by injecting effector proteins into host cells through the type III secretion apparatus, which is comprised of a basal body, a needle, and a tip. The needle channel is formed by the assembly of a single needle protein. To explore the export mechanisms of MxiH needle protein through the needle of Shigella flexneri, an essential step during needle assembly, we have performed steered molecular dynamics simulations in implicit solvent. The trajectories reveal a screwlike rotation motion during the export of nativelike helix-turn-helix conformations. Interestingly, the channel interior with excessive electronegative potential creates an energy barrier for MxiH to enter the channel, whereas the same may facilitate the ejection of the effectors into host cells. Structurally known basal regions and ATPase underneath the basal region also have electronegative interiors. Effector proteins also have considerable electronegative potential patches on their surfaces. From these observations, we propose a repulsive electrostatic mechanism for protein translocation through the type III secretion apparatus. Based on this mechanism, the ATPase activity and/or proton motive force could be used to energize the protein translocation through these nanomachines. A similar mechanism may be applicable to macromolecular channels in other secretion systems or viruses through which proteins or nucleic acids are transported.     

Identification of the MxiH needle protein residues responsible for anchoring invasion plasmid antigen D to the type III secretion needle tip

The pathogenesis of Shigella flexneri requires a functional type III secretion apparatus to serve as a conduit for injecting host-altering effector proteins into the membrane and cytoplasm of the targeted cell. The type III secretion apparatus is composed of a basal body and an exposed needle that is an extended polymer of MxiH with a 2.0-nm inner channel. Invasion plasmid antigen D (IpaD) resides at the tip of the needle to control type III secretion. The atomic structures of MxiH and IpaD have been solved. MxiH (8.3 kDa) is a helix-turn-helix, whereas IpaD (36.6 kDa) has a dumbbell shape with two globular domains flanking a central coiled-coil that stabilizes the protein. These structures alone, however, have not been sufficient to produce a workable in silico model by which IpaD docks at the needle tip. Thus, the work presented here provides an initial step in understanding this important protein-protein interaction. We have identified key MxiH residues located in its PSNP loop and the contiguous surface that uniquely contribute to the formation of the IpaD-needle interface as determined by NMR chemical shift mapping. Mutation of Asn-43, Leu-47, and Tyr-50 residues severely affects the stable maintenance of IpaD at the Shigella surface and thus compromises the invasive phenotype of S. flexneri. Other residues could be mutated to give rise to intermediate phenotypes, suggesting they have a role in tip complex stabilization while not being essential for tip complex formation. Initial in vitro fluorescence polarization studies confirmed that specific amino acid changes adversely affect the MxiH-IpaD interaction. Meanwhile, none of the mutations appeared to have a negative effect on the MxiH-MxiH interactions required for efficient needle assembly.     

The Common Structural Architecture of Shigella flexneri and Salmonella typhimurium Type Three Secretion Needles

The Type Three Secretion System (T3SS), or injectisome, is a macromolecular infection machinery present in many pathogenic Gram-negative bacteria. It consists of a basal body, anchored in both bacterial membranes, and a hollow needle through which effector proteins are delivered into the target host cell. Two different architectures of the T3SS needle have been previously proposed. First, an atomic model of the Salmonella typhimurium needle was generated from solid-state NMR data. The needle subunit protein, PrgI, comprises a rigid-extended N-terminal segment and a helix-loop-helix motif with the N-terminus located on the outside face of the needle. Second, a model of the Shigella flexneri needle was generated from a high-resolution 7.7-Å cryo-electron microscopy density map. The subunit protein, MxiH, contains an N-terminal α-helix, a loop, another α-helix, a 14-residue-long β-hairpin (Q51–Q64) and a C-terminal α-helix, with the N-terminus facing inward to the lumen of the needle. In the current study, we carried out solid-state NMR measurements of wild-type Shigella flexneri needles polymerized in vitro and identified the following secondary structure elements for MxiH: a rigid-extended N-terminal segment (S2-T11), an α-helix (L12-A38), a loop (E39-P44) and a C-terminal α-helix (Q45-R83). Using immunogold labeling in vitro and in vivo on functional needles, we located the N-terminus of MxiH subunits on the exterior of the assembly, consistent with evolutionary sequence conservation patterns and mutagenesis data. We generated a homology model of Shigella flexneri needles compatible with both experimental data: the MxiH solid-state NMR chemical shifts and the state-of-the-art cryoEM density map. These results corroborate the solid-state NMR structure previously solved for Salmonella typhimurium PrgI needles and establish that Shigella flexneri and Salmonella typhimurium subunit proteins adopt a conserved structure and orientation in their assembled state. Our study reveals a common structural architecture of T3SS needles, essential to understand T3SS-mediated infection and develop treatments.     

Helical packing of needles from functionally altered Shigella type III secretion systems

Gram-negative bacteria commonly interact with eukaryotic host cells using type III secretion systems (TTSSs or secretons), which comprise cytoplasmic, transmembrane and extracellular domains. The extracellular domain is a hollow needle-like structure protruding 60 nm beyond the bacterial surface. The TTSS is activated to transfer bacterial proteins directly into a host cell only upon physical contact with the target cell. We showed previously that the monomer of the Shigella flexneri needle, MxiH, assembles into a helical structure with parameters similar to those defining the architecture of the extracellular components of bacterial flagella. By analogy with flagella, which are known to exist in different helical states, we proposed that changes in the helical packing of the needle might be used to sense host cell contact. Here, we show that, on the contrary, mutations within MxiH that lock the TTSS into altered secretion states do not detectably alter the helical packing of needles. This implies that either: (1) host cell contact is signalled through the TTSS via helical changes in the needle that are significantly smaller than those linked to structural changes in the flagellar filament and therefore too small to be detected by our analysis methods or (2) that signal transduction in this system occurs via a novel molecular mechanism.     

Helical reconstruction of Salmonella and Shigella needle filaments attached to type 3 basal bodies

Gram-negative pathogens evolved a syringe-like nanomachine, termed type 3 secretion system, to deliver protein effectors into the cytoplasm of host cells. An essential component of this system is a long helical needle filament that protrudes from the bacterial surface and connects the cytoplasms of the bacterium and the eukaryotic cell. Previous structural research was predominantly focused on reconstituted type 3 needle filaments, which lacked the biological context. In this work we introduce a facile procedure to obtain high-resolution cryo-EM structure of needle filaments attached to the basal body of type 3 secretion systems. We validate our approach by solving the structure of Salmonella PrgI filament and demonstrate its utility by obtaining the first high-resolution cryo-EM reconstruction of Shigella MxiH filament. Our work paves the way to systematic structural characterization of attached type 3 needle filaments in the context of mutagenesis studies, protein structural evolution and drug development.     

Phosphatases and kinases delivered to the host cell by bacterial pathogens

The gram-negative type III secretion pathway translocates bacterial proteins directly into eukaryotic host cells, thus allowing a pathogen to interfere directly with host signalling pathways. Protein and inositol phosphatases and protein kinases have been identified as delivered effectors in three bacterial pathogens, Salmonella, Shigella and Yersinia, and it is expected that several more such type III effectors will be found.     

Ultrastructural analysis of IpaD at the tip of the nascent MxiH type III secretion apparatus of Shigella flexneri

Shigella flexneri is a Gram-negative enteric pathogen that is the predominant cause of bacillary dysentery. Shigella uses a type III secretion system to deliver effector proteins that alter normal target cell functions to promote pathogen invasion. The type III secretion apparatus (T3SA) consists of a basal body, an extracellular needle, and a tip complex that is responsible for delivering effectors into the host cell cytoplasm. IpaD [Ipa (invasion plasmid antigen)] is the first protein to localize to the T3SA needle tip, where it prevents premature effector secretion and serves as an environmental sensor for triggering recruitment of the translocator protein IpaB to the needle tip. Thus, IpaD would be expected to form a stable structure whose overall architecture supports its functions. It is not immediately obvious from the published IpaD crystal structure (Protein Data Bank ID 2j0o) how a multimer of IpaD would be incorporated at the tip of the first static T3SA intermediate, nor what its functional role would be in building a mature T3SA. Here, we produce three-dimensional reconstructions from transmission electron microscopy images of IpaD localized at the Shigella T3SA needle tip for comparison to needle tips from a Shigella ipaD-null mutant. The results demonstrate that IpaD resides as a homopentamer at the needle tip of the T3SA. Furthermore, comparison to tips assembled from the distal domain IpaD(Δ192-267) mutation shows that IpaD adopts an elongated conformation that facilitates its ability to control type III secretion and stepwise assembly of the T3SA needle tip complex.     

Functional conservation of the secretion and translocation machinery for virulence proteins of yersiniae, salmonellae and shigellae.

Virulent bacteria of the genera Yersinia, Shigella and Salmonella secrete a number of virulence determinants, Yops, Ipas and Sips respectively, by a type III secretion pathway. The IpaB protein of Shigella flexneri was expressed in Yersinia pseudotuberculosis and found to be secreted under the same conditions required for Yop secretion. Likewise, YopE was secreted by the wild-type strain LT2 of Salmonella typhimurium, but YopE was not secreted by the isogenic invA mutant. Secretion of both IpaB and YopE required their respective chaperones, IpgC and YerA. In addition, yopE-containing S. typhimurium expressed a YopE-mediated cytotoxicity on cultured HeLa cells. YopE was detected in the cytosol of the infected HeLa cells and the amount of translocated YopE correlated with the degree of cytotoxicity. Both translocation and cytotoxicity were prevented by the addition of gentamicin. Treatment of HeLa cells with cytochalasin D prior to infection prevented internalization of bacteria, but translocation of YopE was still observed. These results favour the hypothesis that YopE is translocated through the plasma membrane by surface-located bacteria. We propose that virulent Salmonella and Shigella deliver virulence effector molecules into the target cell through the utilization of a functionally conserved secretion/translocation machinery similar to that shown for Yersinia.