Polymer-Based Sustained-Release Dosage Forms for Protein Drugs, Challenges, and Recent Advances

While the concept of using polymer-based sustained-release delivery systems to maintain therapeutic concentration of protein drugs for extended periods of time has been well accepted for decades, there has not been a single product in this category successfully commercialized to date despite clinical and market demands. To achieve successful systems, technical difficulties ranging from protein denaturing during formulation process and the course of prolonged in vivo release, burst release, and incomplete release, to low encapsulation efficiency and formulation complexity have to be simultaneously resolved. Based on this updated understanding, formulation strategies attempting to address these aspects comprehensively were reported in recent years. This review article (with 134 citations) aims to summarize recent studies addressing the issues above, especially those targeting practical industrial solutions. Formulation strategies representative of three areas, microsphere technology using degradable hydrophobic polymers, microspheres made of water soluble polymers, and hydrophilic in vivo gelling systems will be selected and introduced. To better understand the observations and conclusions from different studies for different systems and proteins, physicochemical basis of the technical challenges and the pros and cons of the corresponding formulation methods will be discussed.     

Evaluation of Ionotropic Cross-Linked Chitosan/Gelatin B Microspheres of Tramadol Hydrochloride

Microspheres of tramadol hydrochloride (TM) for oral delivery were prepared by complex coacervation method without the use of chemical cross-linking agents such as glutaraldehyde to avoid the toxic reactions and other undesirable effects of the chemical cross-linking agents. Alternatively, ionotropic gelation was employed by using sodium-tripolyphosphate as cross-linking agent. Chitosan and gelatin B were used as polymer and copolymer, respectively. All the prepared microspheres were subjected to various physicochemical studies, such as drug–polymer compatibility by thin layer chromatography (TLC) and Fourier transform infrared (FTIR) spectroscopy, surface morphology by scanning electron microscopy, frequency distribution, drug entrapment efficiency, in vitro drug release characteristics and release kinetics. The physical state of drug in the microspheres was determined by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). TLC and FTIR studies indicated no drug–polymer incompatibility. All the microspheres showed initial burst release followed by a fickian diffusion mechanism. DSC and XRD analysis indicated that the TM trapped in the microspheres existed in an amorphous or disordered-crystalline status in the polymer matrix. From the preliminary trials, it was observed that it may be possible to formulate TM microspheres by using biodegradable natural polymers such as chitosan and gelatin B to overcome the drawbacks of TM and to increase the patient compliance.     

Cephalexin Microspheres for Dairy Mastitis: Effect of Preparation Method and Surfactant Type on Physicochemical Properties of the Microspheres

The aim of this study was to evaluate the effects of preparation method and the type of surfactant on the properties of cephalexin (CPX) microspheres in order to obtain delivery systems suitable for the treatment of dairy mastitis. Microspheres were obtained using various preparation conditions and their physicochemical characteristics such as size, loading efficiency, morphology, and drug crystallinity were investigated. Antibacterial activity of microspheres from the optimum preparation condition was also studied. CPX microspheres were prepared by two different W/O/W emulsion solvent evaporation methods using PLGA as a matrix forming polymer. Several types of surfactants including nonionic, cationic, and anionic at different concentrations were used for preparation of the particles. The type and concentration of surfactant did neither affect the size nor morphology of the microspheres but showed a pronounced effect on the CPX encapsulation efficiency. It was found that Tween 80 showed the highest drug encapsulation efficiency (66.5%). Results from X-ray diffraction diffractograms and differential scanning calorimetry thermograms indicated that CPX entrapped in these microparticles was amorphous. Assessment of antibacterial activity showed that the obtained CPX microspheres exhibited good inhibition with minimum inhibitory concentration and minimum bactericidal concentration values of 128 μg/mL and 2,048 mg/mL against Staphylococcus aureus ATCC 25923, 512 μg/mL and 4,096 mg/mL against Escherichia coli ATCC 25922, respectively.     

Quantification of isoniazid and acetylisoniazid in rat plasma and alveolar macrophages by liquid chromatography-tandem mass spectrometry with on-line extraction

To evaluate if pulmonary delivery of microparticles loaded with a prodrug of isoniazid (INH), isoniazid methanesulfonate (INHMS), can target alveolar macrophages (AM) and reduce metabolism of INH, an HPLC-MS/MS assay with automated online extraction for quantification of INH and its metabolite acetylisoniazid (AcINH) in plasma and AMs was developed and validated. Reproducibility in rat plasma and homogenate of a rat AM cell line, NR8383, for INH and AcINH showed excellent precision and accuracy with calibration curves exhibiting linearity within a range of 1-250ng/ml of INH and 0.05-50ng/ml of AcINH (r(2)>0.99). The validated methods were successfully applied to pharmacokinetic study of INHMS-loaded microparticles in rats, demonstrating efficient targeting of AMs and reduction of INH metabolism.     

Negative Thermo-responsive Microspheres Based on Hydrolyzed Gelatin as Drug Delivery Device

This paper deals with the synthesis of thermo-responsive microspheres with proteic structure exhibiting a transition temperature close to the body temperature. Temperature-sensitive hydrogels have attracted extensive interest due to their potential and promising applications in drug delivery field since they can undergo a rapid and reversible phase transition from a swollen to a shrunken state depending on environmental temperature. The hydrogels were synthesized by free-radical polymerization of hydrolyzed methacrylated gelatin (HGel-MA) and N,N′-methylenebisacrylamide as pro-hydrophilic multifunctional macromer and crosslinker, respectively, and N-isopropylacrylamide as thermo-responsive monomer. Thermal analyses showed negative thermo-responsive behavior for all compositions and, by increasing the content of the hydrophilic moieties in the network, the transition temperature raised to 36.9°C, close to the physiological values. In order to test the materials as drug carriers, diclofenac sodium salt was chosen as model drug. Drug release profiles, in phosphate buffer solution (pH 7.0, 10⁻³ M) at 25 and 40°C, depend on the hydrogel’s crosslinking degree and hydrophilic/hydrophobic balance in the polymeric network. For all formulations, in the shrunken state, the drug release percent values ranged from 80% to 100% after 24 h, and after 3 h, more than 60% of therapeutics was delivered. On the contrary, the swelling of the loaded microparticles produces, even after 30 h, a drug release percent of about 75%. By using semi-empirical equations, the release mechanism was extensively studied and the diffusional contribute was evaluated. The physico-chemical characteristics of thermo-responsive materials confirm the applicability of the microspheres as drug delivery device.     

Non-phagocytic uptake of intravenously injected microspheres in rat spleen: influence of particle size and hydrophilic coating

A recent development in prolonging the circulation time of drug carriers, such as liposomes and microspheres, has been to minimize their removal by macrophages of the reticuloendothelial system by covering their surface with hydrophilic polymers such as poloxamers, poloxamines and poly(ethyleneglycols). Here we demonstrate that this strategy may not necessarily prolong the circulatory half-life of drug carriers in all animal models. In rats, as opposed to rabbits, a non-phagocytic mechanism in the spleen may be triggered to remove efficiently from the blood drug carriers coated with hydrophilic coatings. Both the size of particle and its hydrophilic coating may act synergistically to trigger this non-phagocytic mechanism. In rats, a remarkable log to log relationship between particle size and spleen uptake was observed for both uncoated and polymeric coated microspheres. The potential implication of these observations in site-specific delivery of drug carriers is discussed.     

In silico Structure Modeling and Comparative Analysis of Characterization Properties of Protein Polymers Useful for Protein-Based Nano Particulate Drug Delivery Systems (NPDDS): A Bioinformatics Approach

With an increasing interest in nanoparticulate delivery systems, there is a greater need to identify biomaterials that are biocompatible and safe for human applications. Protein polymers from animal and plant sources are promising materials for designing nanocarriers. Composition of the protein plays an important role for specific drug delivery applications such as drug release, targeting, and stimuli responsive drug release. An important issue in protein polymers is characteristics such as size, charge, and hydrophobicity may play a significant role in phagocytic uptake and initiating a subsequent immune response. This remains to be investigated systematically by analyzing factors that influence nanoparticle characteristics of protein and reduce phagocytic uptake and does not initiate immune response too. Although protein polymers are biodegradable, it is essential to ensure that there must not be premature enzymatic breakdown of the protein nanoparticles in the systemic circulation. Surface modification of the protein nanoparticles can be used to address this issue to propose the necessary modification in the surface of the protein would be great contribution in the nano particulate drug delivery systems (NPPDS). Of the various proteins, gelatin and albumin have been widely studied for drug delivery applications. Plant proteins are yet to be investigated widely for drug delivery applications so there is need to find out the plant proteins capable to act as nanoparticles. The commercial success of albumin-based nanoparticles has created an interest in other proteins. An increased understanding of the physicochemical properties coupled with the developments in rDNA technology will open up new opportunities for protein-based nanoparticulate systems. In the present studies several proteins currently useful for drug delivery system were structurally modeled and has been analyzed to propose the essential characteristics of protein for protein-based NPDDS.     

Overviews on the cellular uptake mechanism of polysaccharide colloidal nanoparticles

Nanoparticulate drug/gene carriers have gained much attention in the past decades because of their versatile and tunable properties. However, efficacy of the therapeutic agents can be further enhanced using naturally occurring materials‐based nanoparticles. Polysaccharides are an emerging class of biopolymers; therefore, they are generally considered to be safe, non‐toxic, biocompatible and biodegradable. Considering that the target of nanoparticle‐based therapeutic strategies is localization of biomedical agents in subcellular compartments, a detailed understanding of the cellular mechanism involved in the uptake of polysaccharide‐based nanoparticles is essential for safe and efficient therapeutic applications. Uptake of the nanoparticles by the cellular systems occurs with a process known as endocytosis and is influenced by the physicochemical characteristics of nanoparticles such as size, shape and surface chemistry as well as the employed experimental conditions. In this study, we highlight the main endocytosis mechanisms responsible for the cellular uptake of polysaccharide nanoparticles containing drug/gene.     

Ophthalmic Delivery of Brinzolamide by Liquid Crystalline Nanoparticles: In Vitro and In Vivo Evaluation

Brinzolamide (BLZ) is a drug used to treat glaucoma; however, its use is restricted due to some unwanted adverse events. The goal of this study was to develop BLZ-loaded liquid crystalline nanoparticles (BLZ LCNPs) and to figure out the possibility of LCNPs as a new therapeutic system for glaucoma. BLZ LCNPs were produced by a modified emulsification method and their physicochemical aspects were estimated. In vitro release study revealed BLZ LCNPs displayed to some extent prolonged drug release behavior in contrast to that of BLZ commercial product (Azopt®). The ex vivo apparent permeability coefficient of BLZ LCNP systems demonstrated a 3.47-fold increase compared with that of Azopt®. The pharmacodynamics was checked over by calculating the percentage fall in intraocular pressure and the pharmacodynamic test showed that BLZ LCNPs had better therapeutic potential than Azopt®. Furthermore, the in vivo ophthalmic irritation was evaluated by Draize test. In conclusion, BLZ LCNPs would be a promising delivery system used for the treatment of glaucoma, with advantages such as lower doses but maintaining the effectiveness, better ocular bioavailability, and patient compliance compared with Azopt®.     

Preparation of adriamycin gelatin microsphere-loaded decellularized periosteum that is cytotoxic to human osteosarcoma cells

The purpose of this study was to develop a novel approach to treat bone osteosarcoma using a multipurpose scaffold aiming for local drug delivery. The slowly releasing microspheres was designed to deliver the chemotherapy drug adriamycin (ADM) and a decellularized (D) periosteum scaffold (which is known to be able to promote bone regeneration) was used to carry these microspheres. D-periosteum was obtained by physical and chemical decellularization. Histological results showed that the cellular components were effectively removed. The D-periosteum showed an excellent cytocompatibility and the ability to promote adhesion and growth of fibroblasts. Two kinds of slowly releasing microspheres, adriamycin gelatin microspheres (ADM-GMS) and adriamycin poly (dl-lactide-co-glycolide) gelatin microspheres (ADM-PLGA-GMS), were prepared and anchored to D-periosteum, resulting in two types of drug-releasing regenerative scaffolds. The effectiveness of these two scaffolds in killing human osteosarcoma cells was tested by evaluating cell viability overtime of the cancer cells cultured with the scaffolds. In summary, a gelatin/decellularized periosteum-based biologic scaffold material was designed aiming for local delivery of chemotherapy drugs for osteosarcoma, with the results showing ability of the scaffolds in sustaining release of the cancer drug and in suppressing growth of the cancer cells in vitro.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Recent Advancement of Chitosan-Based Nanoparticles for Oral Controlled Delivery of Insulin and Other Therapeutic Agents

Nanoparticles composed of naturally occurring biodegradable polymers have emerged as potential carriers of various therapeutic agents for controlled drug delivery through the oral route. Chitosan, a cationic polysaccharide, is one of such biodegradable polymers, which has been extensively exploited for the preparation of nanoparticles for oral controlled delivery of several therapeutic agents. In recent years, the area of focus has shifted from chitosan to chitosan derivatized polymers for the preparation of oral nanoparticles due to its vastly improved properties, such as better drug retention capability, improved permeation, enhanced mucoadhesion and sustained release of therapeutic agents. Chitosan derivatized polymers are primarily the quaternized chitosan derivatives, chitosan cyclodextrin complexes, thiolated chitosan, pegylated chitosan and chitosan combined with other peptides. The current review focuses on the recent advancements in the field of oral controlled release via chitosan nanoparticles and discusses about its in vitro and in vivo implications.     

Macrophage specific drug delivery in experimental leishmaniasis

Macrophage-specific delivery systems are the subject of much interest nowadays, because of the fact that macrophages act as host cells for many parasites and bacteria, which give rise to outbreak of so many deadly diseases(eg. leishmaniasis, tuberculosis etc.) in humans. To combat these deadly diseases initially macrophage specific liposomal delivery system were thought of and tested in vivo against experimental leishmaniasis in hamsters using a series of indigenous or synthetic antileishmanial compounds and the results were critically discussed. In vitro testing was also done against macrophages infected with Leishmania donovani, the causative agent for visceral leishmaniasis. The common problem of liposome therapy being their larger size, stability and storage, non-ionic surfactant vesicles, niosomes were prepared, for their different drug distribution and release characteristics compared to liposomes. When tested in vivo, the retention capacity of niosomes was found to be higher than that of liposomes due to the absence of lipid molecules and their smaller size. Thus the therapeutic efficacy of certain antileishmanial compounds was found to be better than that in the liposomal form. The niosomes, being cheaper, less toxic, biodegradable and non-immunogenic, were considered for sometime as suitable alternatives to liposomes as drug carriers. Besides the advent of other classical drugs carriers(e.g. neoglycoproteins), the biggest challenge came from polymeric delivery vehicles, specially the polymeric nanoparticles which were made of cost effective biodegradable polymers and different natural polymers. Because of very small size and highly stable nature, use of nanoparticles as effective drug carriers has been explored in experimental leishmaniasis using a series of antileishmanial compounds, both of indigenous and synthetic origin. The feasibility of application in vivo, when tested for biological as well as for other physicochemical parameters, the polymeric nanoparticles have turned out to be the best and thus may be projected for effective use in the clinics.     

Controlled Release of Dutasteride from Biodegradable Microspheres: In Vitro and In Vivo Studies

The aim of the present work was to study the in vitro/in vivo characteristics of dutasteride loaded biodegradable microspheres designed for sustained release of dutasteride over four weeks. An O/W emulsion-solvent evaporation method was used to incorporate dutasteride, which is of interest in the treatment of benign prostatic hyperplasia (BPH), into poly(lactide-co-glycolide) (PLGA). A response surface method (RSM) with central composite design (CCD) was employed to optimize the formulation variables. A prolonged in vitro drug release profile was observed, with a complete release of the entrapped drug within 28 days. The pharmacokinetics study showed sustained plasma drug concentration-time profile of dutasteride loaded microspheres after subcutaneous injection into rats. The in vitro drug release in rats correlated well with the in vivo pharmacokinetics profile. The pharmacodynamics evaluated by determination of the BPH inhibition in the rat models also showed a prolonged pharmacological response. These results suggest the potential use of dutasteride loaded biodegradable microspheres for the management of BPH over long periods.     

Development of Spray Dried Liposomal Dry Powder Inhaler of Dapsone

This investigation was undertaken to evaluate practical feasibility of site specific pulmonary delivery of liposomal encapsulated Dapsone (DS) dry powder inhaler for prolonged drug retention in lungs as an effective alternative in prevention of Pneumocystis carinii pneumonia (PCP) associated with immunocompromised patients. DS encapsulated liposomes were prepared by thin film evaporation technique and resultant liposomal dispersion was passed through high pressure homogenizer. DS nano-liposomes (NLs) were separated by ultra centrifugation and characterized. NLs were dispersed in phosphate buffer saline (PBS) pH 7.4 containing different carriers like lactose, sucrose, and hydrolyzed gelatin, and 15% l-leucine as antiadherent. The resultant dispersion was spray dried and spray dried formulation were characterized to ascertain its performance. In vitro pulmonary deposition was assessed using Andersen Cascade Impactor as per USP. NLs were found to have average size of 137 ± 15 nm, 95.17 ± 3.43% drug entrapment, and zeta potential of 0.8314 ± 0.0827 mV. Hydrolyzed gelatin based formulation was found to have low density, good flowability, particle size of 7.9 ± 1.1 μm, maximum fine particle fraction (FPF) of 75.6 ± 1.6%, mean mass aerodynamic diameter (MMAD) 2.2 ± 0.1 μm, and geometric standard deviation (GSD) 2.3 ± 0.1. Developed formulations were found to have in vitro prolonged drug release up to 16 h, and obeys Higuchi's Controlled Release model. The investigation provides a practical approach for direct delivery of DS encapsulated in NLs for site specific controlled and prolonged release behavior at the site of action and hence, may play a promising role in prevention of PCP.     

Microparticulate Based Topical Delivery System of Clobetasol Propionate

Psoriasis is a chronic, autoimmune skin disease affecting approximately 2% of the world's population. Clobetasol propionate which is a superpotent topical corticosteroid is widely used for topical treatment of psoriasis. Conventional dosage forms like creams and ointments are commonly prefered for the therapy. The purpose of this study was to develop a new topical delivery system in order to provide the prolonged release of clobetasol propionate and to reduce systemic absorption and side effects of the drug. Clobetasol propionate loaded-poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres were prepared by oil-in-water emulsion–solvent evaporation technique. Particle size analysis, morphological characterization, DSC and XRD analyses and in vitro drug release studies were performed on the microparticle formulations. Emulgel formulations were prepared as an alternative for topical delivery of clobetasol propionate. In vitro drug release studies were carried out from the emulgel formulations containing pure drug and drug-loaded microspheres. In addition, the same studies were performed to determine the drug release from the commercial cream product of clobetasol propionate. The release of clobetasol propionate from the emulgel formulations was significantly higher than the commercial product. In addition, the encapsulation of clobetasol propionate in the PLGA microspheres significantly delayed the drug release from the emulgel formulation. As a result, the decrease in the side effects of clobetasol propionate by the formulation containing PLGA microspheres is expected.     

Ocular amphotericin B delivery by chitosan-modified nanostructured lipid carriers for fungal keratitis-targeted therapy

Abstract

Context: Fungal keratitis, a corneal fungal infection of the eye caused mainly by Candida species, has become the leading cause of blindness resulting from corneal disease in China. Present limitations in the management of ophthalmic fungal infections include the inability to provide long-term extraocular drug delivery without compromising intraocular structures and/or systemic drug exposure.

Objective: The aim of this study was to construct amphotericin B (AmB) loaded, chitosan-modified, nanostructured lipid carriers (AmB-CH-NLC) for prolonged ocular application and for the improvement of the targeted delivery of AmB to the ocular mucosa.

Materials and methods: The AmB-CH-NLC was produced by the method of emulsion evaporation-solidification at low temperature. The particle size, zeta potential, and encapsulation efficiency, drug-release behavior, and corneal penetration ability were performed in vitro and in vivo.

Results and discussion: The prepared AmB-CH-NLC nanoparticles exhibited a measured size of 185.4?nm, a zeta potential of 27.1?mV, and an entrapment efficiency of 90.9%. Sustained drug release behavior was observed in vitro. The in vivo ocular pharmacokinetic study indicated improved bioavailability of AmB-CH-NLC. The corneal penetration study showed that the AmB-CH-NLC could successfully penetrate into the cornea with no obvious irritation to the rabbits’ eyes.

Conclusion: The results support that this novel nanomedicine could be a promising system for effective ocular delivery of amphotericin B for fungal keratitis-targeted therapy.     

Development of Budesonide Microparticles Using Spray-Drying Technology for Pulmonary Administration: Design, Characterization, In Vitro Evaluation, and In Vivo Efficacy Study

The purpose of this research was to generate, characterize, and investigate the in vivo efficacy of budesonide (BUD) microparticles prepared by spray-drying technology with a potential application as carriers for pulmonary administration with sustained-release profile and improved respirable fraction. Microspheres and porous particles of chitosan (drug/chitosan, 1:2) were prepared by spray drying using optimized process parameters and were characterized for different physicochemical parameters. Mass median aerodynamic diameter and geometric standard deviation for conventional, microspheres, and porous particles formulations were 2.75, 4.60, and 4.30 μm and 2.56, 1.75, and 2.54, respectively. Pharmacokinetic study was performed in rats by intratracheal administration of either placebo or developed dry powder inhalation (DPI) formulation. Pharmacokinetic parameters were calculated (Ka, Ke, T _max, C _max, AUC, and Vd) and these results indicated that developed formulations extended half life compared to conventional formulation with onefold to fourfold improved local and systemic bioavailability. Estimates of relative bioavailability suggested that developed formulations have excellent lung deposition characteristics with extended T _1/2 from 9.4 to 14 h compared to conventional formulation. Anti-inflammatory activity of BUD and developed formulations was compared and found to be similar. Cytotoxicity was determined in A549 alveolar epithelial cell line and found to be not toxic. In vivo pulmonary deposition of developed conventional formulation was studied using gamma scintigraphy and results indicated potential in vitro–in vivo correlation in performance of conventional BUD DPI formulation. From the DPI formulation prepared with porous particles, the concentration of BUD increased fourfold in the lungs, indicating pulmonary targeting potential of developed formulations.     

Molecular recognition by Kluyveromyces of amphotericin B-loaded, galactose-tagged, poly (lactic acid) microspheres

In an effort to develop a new way of drug delivery, especially for polyenic antifungal molecules, we have incorporated amphotericin B (AmB) into biodegradable galactosylated poly (L-lactic acid) (L-PLA) and poly (L-lactic-co-glycolic acid) (PLGA) microspheres. These drug carriers were prepared by solvent evaporation using an oil/water (o/w) emulsion. The ratio of galactosyl spacers with different chain lengths was 1.74-2.78%. The maximal quantity of AmB encapsulated reported to 100 mg of the galactosylated microspheres was 7.14 mg for L-PLA (encapsulation rate 45% of mole) and 6.42 mg for PLGA derivatives (encapsulation rate 81% of mole). In our yeast model, drug release depended on three factors: (i) presence of galactosylated antennae, (ii) length of galactosyl antenna and (iii) nature of the polymer. More of the AmB trapped in PLGA microspheres was released than from PLA microspheres. These novel functionalised microspheres could be required for the delivering of therapeutic agents according to their recognition to specific cells.     

Prolonged release biodegradable vesicular carriers for rifampicin--formulation and kinetics of release

An attempt has been made to design suitable liposome and niosome-encapsulated drug delivery system for rifampicin and evaluated the same in vitro and in vivo. A modified lipid layer hydration method was employed to prepare these vesicular carriers. The formulated systems were characterized in vitro for size distribution analysis, drug entrapment, drug release profiles and vesicular stability at different conditions of storage. In vivo drug kinetics was evaluated in normal, healthy albino rats for niosomal formulation upon subcutaneous injection and various pharmacokinetic parameters were determined. Niosomes and liposomes exhibited mean diameter of 9.73 and 11.87 microns with entrapment efficiencies of 30.5 and 34.2% respectively. Both the products exhibited sustained release characteristics in vitro with zero order drug release kinetics up to initial 10 hr. Stability evaluation indicated that both formulations were not significantly leaky over a period of one month. Niosomal formulation elevated plasma elimination half life and decreased elimination rate constants for rifampicin in vivo suggested that encapsulation retarded the removal of the drug from circulation compared to free drug due to slow drug release into systemic circulation. A five-fold increase in the area under plasma rifampicin concentration-time curve for niosomal rifampicin as compared to free drug indicated better bioavailability of encapsulated drug. It is evident from this study that niosomes and liposomes could be promising delivery systems for rifampicin with prolonged drug release profiles and reasonably good stability characteristics.