Investigations into the ability of an oblique alpha-helical template to provide the basis for design of an antimicrobial anionic amphiphilic peptide

AP1 (GEQGALAQFGEWL) was shown by theoretical analysis to be an anionic oblique-orientated alpha-helix former. The peptide exhibited a monolayer surface area of 1.42 nm(2), implying possession of alpha-helical structure at an air/water interface, and Fourier transform infrared spectroscopy (FTIR) showed the peptide to be alpha-helical (100%) in the presence of vesicle mimics of Escherichia coli membranes. FTIR lipid-phase transition analysis showed the peptide to induce large decreases in the fluidity of these E. coli membrane mimics, and Langmuir-Blodgett trough analysis found the peptide to induce large surface pressure changes in monolayer mimics of E. coli membranes (4.6 mN.m(-1)). Analysis of compression isotherms based on mixing enthalpy (DeltaH) and the Gibbs free energy of mixing (DeltaG(Mix)) predicted that these monolayers were thermodynamically stable (DeltaH and DeltaG(Mix) each negative) but were destabilized by the presence of the peptide (DeltaH and DeltaG(Mix) each positive). The peptide was found to have a minimum lethal concentration of 3 mm against E. coli and was seen to cause lysis of erythrocytes at 5 mm. In combination, these data clearly show that AP1 functions as an anionic alpha-helical antimicrobial peptide and suggest that both its tilted peptide characteristics and the composition of its target membrane are important determinants of its efficacy of action.     

Thermodynamic interactions of a cis and trans benzanilide with Escherichia coli bacterial membranes

The activity of a membrane interactive cis and trans benzanilide against Escherichia coli membrane mimics was investigated using Langmuir monolayers. It was found that in the presence of E. coli lipid mix monolayers, cis-benzanilide induced maximal surface pressure changes of 1?mN?m(-1), whereas a reduced interaction was observed with trans-benzanilide. Compression isotherm analysis of these monolayers showed ?G (mix)?相似文献   

Antimicrobial properties of a lipid interactive alpha-helical peptide VP1 against Staphylococcus aureus bacteria

Theoretical analysis indicates that peptide VP1 forms a membrane interactive amphiphilic alpha-helix with antibacterial properties. Fourier transform infra-red based analyses showed VP1 to be alpha-helical (45%) in the presence of vesicle mimics of membranes from Staphylococcus aureus and to induce increases in the fluidity of these vesicles, as indicated by a rise in wavenumber of circa 0.5 to 1.0 cm(-1). The peptide induced surface pressure increases of 5 mN m(-1) in monolayer mimics of S. aureus membranes confirm the formation of a membrane interactive alpha-helix. These interactions appeared to involve significant hydrophobic and electrostatic contributions as VP1 induced comparable surface pressure changes in anionic (5.5 mN m(-1)) and zwitterionic (4 mN m(-1)) lipid monolayers. It is suggested that whilst efficacy requires further sequence specific information, the peptides generic structure provides the basis for its broad antimicrobial activity.     

Investigations into the ability of the peptide,HAL18, to interact with bacterial membranes

Halocidin was isolated from hemocytes, Halocynthia aurantium as a heterodimeric peptide consisting of two α-helical subunits, Hal15 and Hal18. Hal18 was shown to have antibacterial properties against Bacillus subtilis (MLC = 15 μM) and Escherichia coli (MLC = 100 μM). The peptide was shown to produce stable monolayers, which were characteristic of α-helical peptides predicted to orientate parallel to the surface of the interface. Constant area assays showed that Hal18 was surface active (4 μM) inducing surface pressure changes >30 mN m⁻¹ characteristic of membrane interactive peptides. The peptide induced stable surface pressure changes in monolayers that were mimetic of B. subtilis membranes (circa 7 mN m⁻¹) and E. coli membrane-mimics (circa 4 mN m⁻¹). Hal18 inserted readily into zwitterionic DOPE and anionic DOPG monolayers inducing surface pressure changes circa 8 mN m⁻¹ in both cases, providing evidence that interaction is not headgroup specific. Thermodynamic analysis of compression isotherms showed that the presence of Hal18 destabilised B. subtilis membranes (ΔG _Mix > 0), which is in contrast to its stabilising effect on E. coli lipid extract implying the differential antimicrobial efficacy may be driven by lipid packing.     

Interaction of the antimicrobial peptide pheromone Plantaricin A with model membranes: Implications for a novel mechanism of action

Plantaricin A (plA) is a 26-residue bacteria-produced peptide pheromone with membrane-permeabilizing antimicrobial activity. In this study the interaction of plA with membranes is shown to be highly dependent on the membrane lipid composition. PlA bound readily to zwitterionic 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) monolayers and liposomes, yet without significantly penetrating into these membranes. The presence of cholesterol attenuated the intercalation of plA into SOPC monolayers. The association of plA to phosphatidylcholine was, however, sufficient to induce membrane permeabilization, with nanomolar concentrations of the peptide triggering dye leakage from SOPC liposomes. The addition of the negatively charged phospholipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol POPG (SOPC/POPG; molar ratio 8:2) enhanced the membrane penetration of the peptide, as revealed by (i) peptide-induced increment in the surface pressure of lipid monolayers, (ii) increase in diphenylhexatriene (DPH) emission anisotropy measured for bilayers, and (iii) fluorescence characteristics of the two Trps of plA in the presence of liposomes, measured as such as well as in the presence of different quenchers. Despite deeper intercalation of plA into the SOPC/POPG lipid bilayer, much less peptide-induced dye leakage was observed for these liposomes than for the SOPC liposomes. Further changes in the mode of interaction of plA with lipids were evident when also the zwitterionic phospholipid, 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphoethanolaminne (POPE) was present (SOPC/POPG/POPE, molar ratio 3:2:5), thus suggesting increase in membrane spontaneous negative curvature to affect the mode of association of this peptide with lipid bilayer. PlA induced more efficient aggregation of the SOPC/POPG and SOPC/POPG/POPE liposomes than of the SOPC liposomes, which could explain the attenuated peptide-induced dye leakage from the former liposomes. At micromolar concentrations, plA killed human leukemic T-cells by both necrosis and apoptosis. Interestingly, plA formed supramolecular protein-lipid amyloid-like fibers upon binding to negatively charged phospholipid-containing membranes, suggesting a possible mechanistic connection between fibril formation and the cytotoxicity of plA.     

The interactions of aurein 1.2 with cancer cell membranes

Here, the interactions of aurein 1.2, a defence peptide, with T98G glioblastoma cell membranes are studied. The peptide induced maximal surface pressure changes of circa 9 mN m(-1) in monolayers of endogenous T98G membrane lipid. Reducing monolayer anionic lipid showed a positive correlation (R(2)>0.91) with decreases in maximal surface pressure changes induced by aurein 1.2 (circa 3 mN m(-1) in the absence of this lipid). Cancer cell membrane invasion by the peptide therefore appears not to be mediated by lipid receptors or specific lipid requirements but rather a general requirement for anionic lipid and/or other negatively charged membrane components.     

Salt sensitivity of minimal twin arginine translocases

Bacterial twin arginine translocation (Tat) pathways have evolved to facilitate transport of folded proteins across membranes. Gram-negative bacteria contain a TatABC translocase composed of three subunits named TatA, TatB, and TatC. In contrast, the Tat translocases of most Gram-positive bacteria consist of only TatA and TatC subunits. In these minimal TatAC translocases, a bifunctional TatA subunit fulfils the roles of both TatA and TatB. Here we have probed the importance of conserved residues in the bifunctional TatAy subunit of Bacillus subtilis by site-specific mutagenesis. A set of engineered TatAy proteins with mutations in the cytoplasmic hinge and amphipathic helix regions were found to be inactive in protein translocation under standard growth conditions for B. subtilis or when heterologously expressed in Escherichia coli. Nevertheless, these mutated TatAy proteins did assemble into TatAy and TatAyCy complexes, and they facilitated membrane association of twin arginine precursor proteins in E. coli. Interestingly, most of the mutated TatAyCy translocases were salt-sensitive in B. subtilis. Similarly, the TatAC translocases of Bacillus cereus and Staphylococcus aureus were salt-sensitive when expressed in B. subtilis. Taken together, our present observations imply that salt-sensitive electrostatic interactions have critical roles in the preprotein translocation activity of certain TatAC type translocases from Gram-positive bacteria.     

Interaction of antibacterial peptides spanning the carboxy-terminal region of human beta-defensins 1-3 with phospholipids at the air-water interface and inner membrane of E. coli

Synthetic peptides Phd1-3 spanning the cationic carboxy-terminal region of human beta-defensins HBD-1-3 have been shown to have antibacterial activity. Gross morphological changes were seen in E. coli cells treated with these peptides. In this paper, we have studied the surface-active properties of peptides Phd1-3 and their interactions with different phospholipids using Langmuir-Blodgett monolayers. Compression isotherms and increase in pressure on insertion of peptides into lipid monolayers at different initial pressures indicate the affinity of these peptides for negatively charged lipids. Phd3 inserted less effectively into monolayers as compared to Phd1 and Phd2. The peptides differed in their ability to permeabilize the inner membrane of E. coli, with Phd3 being least effective. It is likely that the peptides kill Gram-negative bacteria by more than one mechanism. When hydrophobicity and net charge favor insertion into lipid membranes, then membrane permeabilization could be the primary event in the killing of bacteria. In cases where membrane insertion does not occur, interaction with phospholipid interface induces highly selective stress that leads to stasis and cell death, as proposed for polymyxin B and bactenecin.     

Solid-state NMR investigation of the membrane-disrupting mechanism of antimicrobial peptides MSI-78 and MSI-594 derived from magainin 2 and melittin

The mechanism of membrane interaction of two amphipathic antimicrobial peptides, MSI-78 and MSI-594, derived from magainin-2 and melittin, is presented. Both the peptides show excellent antimicrobial activity. The 8-anilinonaphthalene-1-sulfonic acid uptake experiment using Escherichia coli cells suggests that the outer membrane permeabilization is mainly due to electrostatic interactions. The interaction of MSI-78 and MSI-594 with lipid membranes was studied using 31P and 2H solid-state NMR, circular dichroism, and differential scanning calorimetry techniques. The binding of MSI-78 and MSI-594 to the lipid membrane is associated with a random coil to alpha-helix structural transition. MSI-78 and MSI-594 also induce the release of entrapped dye from POPC/POPG (3:1) vesicles. Measurement of the phase-transition temperature of peptide-DiPoPE dispersions shows that both MSI-78 and MSI-594 repress the lamellar-to-inverted hexagonal phase transition by inducing positive curvature strain. 15N NMR data suggest that both the peptides are oriented nearly perpendicular to the bilayer normal, which infers that the peptides most likely do not function via a barrel-stave mechanism of membrane-disruption. Data obtained from 31P NMR measurements using peptide-incorporated POPC and POPG oriented lamellar bilayers show a disorder in the orientation of lipids up to a peptide/lipid ratio of 1:20, and the formation of nonbilayer structures at peptide/lipid ratio>1:8. 2H-NMR experiments with selectively deuterated lipids reveal peptide-induced disorder in the methylene units of the lipid acyl chains. These results are discussed in light of lipid-peptide interactions leading to the disruption of membrane via either a carpet or a toroidal-type mechanism.     

Interactions of an anionic antimicrobial peptide with Staphylococcus aureus membranes

The antimicrobial activity of the anionic peptide, AP1 (GEQGALAQFGEWL), was investigated. AP1 was found to kill Staphylococcus aureus with an MLC of 3 mM and to induce maximal surface pressure changes of 3.8 mN m⁻¹ over 1200 s in monolayers formed from lipid extract of S. aureus membranes. FTIR spectroscopy showed the peptide to be α-helical (100%) in the presence of vesicles formed from this lipid extract and to induce increases in their fluidity (Δν circa 0.5 cm⁻¹). These combined data show that AP1 is able to function as an α-helical antimicrobial peptide against Gram-positive bacteria and suggest that the killing mechanism used by the peptide involves interactions with the membrane lipid headgroup region. Moreover, this killing mechanism differs strongly from that previously reported for AP1 against Gram-negative bacteria, indicating the importance of considering the effects of membrane lipid composition when investigating the structure/function relationships of antimicrobial peptides.     

Oxidized phospholipids as potential molecular targets for antimicrobial peptides

The effects of oxidatively modified phospholipids on the association with model biomembranes of four antimicrobial peptides (AMPs), temporin B and L, indolicidin, and LL-37(F27W) were studied by Langmuir balance and fluorescence spectroscopy. In keeping with previous reports the negatively charged phospholipid phosphatidylglycerol (PG) enhanced the intercalation of all four peptides into lipid monolayers and liposomal bilayers under low ionic strength conditions. Interestingly, similar effect was observed for 1-palmitoyl-2-(9′-oxo-nonanoyl)-sn-glycero-3-phosphocholine (PoxnoPC), a zwitterionic oxidized phospholipid bearing an aldehyde function at the end of its truncated sn-2 acyl chain. Instead, the structurally similar 1-palmitoyl-2-azelaoyl-sn-glycero-3-phosphocholine (PazePC) containing a carboxylic moiety was less efficient in promoting the membrane association of these peptides. Physiological saline reduced the binding of the above peptides to membranes containing PG, whereas interactions with PoxnoPC were found to be insensitive to ionic strength. Notably, membrane intercalation of temporin L, the most surface active of the above peptides could be into PoxnoPC containing monolayers was strongly attenuated by methoxyamine, suggesting the importance of Schiff base formation between peptide amino groups and the lipid aldehyde function. PoxnoPC and similar aldehyde bearing oxidatively modified phospholipids could represent novel molecular targets for AMPs.     

A high-conductance mode of a poly-3-hydroxybutyrate/calcium/polyphosphate channel isolated from competent Escherichia coli cells

Reconstitution into planar lipid bilayers of a poly-3-hydroxybutyrate/calcium/polyphosphate (PHB/Ca(2+)/polyP) complex from Escherichia coli membranes yields cationic-selective, 100 pS channels (Das, S., Lengweiler, U.D., Seebach, D. and Reusch, R.N. (1997) Proof for a non-proteinaceous calcium-selective channel in Escherichia coli by total synthesis from (R)-3-hydroxybutanoic acid and inorganic polyphosphate. Proc. Natl. Acad. Sci. USA 94, 9075-9079). Here, we report that this complex can also form larger, weakly selective pores, with a maximal conductance ranging from 250pS to 1nS in different experiments (symmetric 150mM KCl). Single channels were inhibited by lanthanum (IC(50)=42+/-4microM, means+/-S.E.M.) with an unusually high Hill coefficient (8.4+/-1.2). Transition to low-conductance states (<250pS) was favored by increased membrane polarization (/V/ >or=50mV). High conductance states (>250pS) may reflect conformations important for genetic transformability, or "competence", of the bacterial cells, which requires the presence of the PHB/Ca(2+)/polyP complex in the membrane.     

Liquid crystalline/gel state phase separation in docosahexaenoic acid-containing bilayers and monolayers

The phase behavior of lipid mixtures containing 1-stearoyl-2-docosahexaenoyl-sn-glycero-3-phosphocholine (18:0, 22:6 PC) with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) was studied with bilayers using differential scanning calorimetry (DSC), and with monolayers monitoring pressure/area isotherms and surface elasticity, and lipid domain formation followed by epifluorescence microscopy. From DSC studies it is concluded that DPPC/18:0, 22:6 PC phase separates into DPPC-rich and 18:0, 22:6 PC-rich phases. In monolayers, phase separation is indicated by changes in pressure-area isotherms implying phase separation where 18:0, 22:6 PC is 'squeezed out' of the remaining DPPC monolayer. Phase separation into lipid domains in the mixed PC monolayer is quantified by epifluorescence microscopy using the fluorescently labeled phospholipid membrane probe, 1, 2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(lissamine rhodamine B sulfonyl). These results further describe the ability of docosahexaenoic acid to participate in lipid phase separations in membranes.     

Cholesterol affects spectrin-phospholipid interactions in a manner different from changes resulting from alterations in membrane fluidity due to fatty acyl chain composition

We previously showed that erythrocyte and brain spectrins bind phospholipid vesicles and monolayers prepared from phosphatidylethanolamine and phosphatidylserine and their mixtures with phosphatidylcholine (Review: A.F. Sikorski, B. Hanus-Lorenz, A. Jezierski, A. R. Dluzewski, Interaction of membrane skeletal proteins with membrane lipid domain, Acta Biochim. Polon. 47 (2000) 565). Here, we show how changes in the fluidity of the phospholipid monolayer affect spectrin-phospholipid interaction. The presence of up to 10%-20% cholesterol in the PE/PC monolayer facilitates the penetration of the monolayer by both types of spectrin. For monolayers constructed from mixtures of PI/PC and cholesterol, the effect of spectrins was characterised by the presence of two maxima (at 5 and 30% cholesterol) of surface pressure for erythroid spectrin, and a single maximum (at 20% cholesterol) for brain spectrin. The binding assay results indicated a small but easily detectable decrease in the affinity of erythrocyte spectrin for FAT-liposomes prepared from a PE/PC mixture containing cholesterol, and a 2- to 5-fold increase in maximal binding capacity (B_max) depending on the cholesterol content. On the other hand, the results from experiments with a monolayer constructed from homogenous synthetic phospholipids indicated an increase in Δπ change with the increase in the fatty acyl chain length of the phospholipids used to prepare the monolayer. This was confirmed by the results of a pelleting experiment. Adding spectrins into the subphase of raft-like monolayers constructed from DOPC, SM and cholesterol (1/1/1) induced an increase in surface pressure. The Δπ change values were, however, much smaller than those observed in the case of a natural PE/PC (6/4) monolayer. An increased binding capacity for spectrins of liposomes prepared from a “raft-like” mixture of lipids could also be concluded from the pelleting assay. In conclusion, we suggest that the effect of membrane lipid fluidity on spectrin-phospholipid interactions is not simple but depends on how it is regulated, i.e., by cholesterol content or by the chemical structure of the membrane lipids.     

Insertion behavior of the Bacillus thuringiensis Cry4Ba insecticidal protein into lipid monolayers

Toxicity mechanisms of Bacillus thuringiensis Cry insecticidal proteins involve membrane insertion and lytic pore formation in lipid bilayers of the target larval midgut cell membranes. The B. thuringiensis Cry4Ba mosquito-larvicidal protein has been shown to be capable of permeabilizing liposome vesicles and of forming ion channels in planar lipid bilayers. Here, the membrane interaction of the 65-kDa activated Cry4Ba protein with the lipid monolayers, comprising dipalmitoyl phosphatidylcholine, dioleoyl phosphatidylethanolamine, and cholesterol (Chol), was studied using Langmuir-Blodgett technique. The interactions of the Cry4Ba protein with the lipid monolayers were measured from the surface pressure versus area isotherms of the protein-lipid monolayers. The increase in the mean molecular area was demonstrated as an incorporation of the protein into lipid monolayers. The insertion of the Cry4Ba protein was monitored by measuring as an increase of the surface pressure at constant molecular area. For a given monolayer, the membrane insertion of the Cry4Ba reduced as the initial surface pressure increased. The Cry4Ba protein showed a strong preference of an insertion towards a Chol monolayer. In addition, the mixed monolayers of Chol showed an enhanced effect on the insertion kinetics of Cry4Ba into lipid films, suggesting its involvement in the modulation of the protein insertion. These findings provide the first evidence that the Cry4Ba protein is capable of inserting itself into lipid monolayers, depending on the packing density of the monolayers. Our results also indicate that only a limited part of the protein is likely to be involved in the insertion.     

MSI-78, an analogue of the magainin antimicrobial peptides,disrupts lipid bilayer structure via positive curvature strain

In this work, we present the first characterization of the cell lysing mechanism of MSI-78, an antimicrobial peptide. MSI-78 is an amphipathic alpha-helical peptide designed by Genaera Corporation as a synthetic analog to peptides from the magainin family. (31)P-NMR of mechanically aligned samples and differential scanning calorimetry (DSC) were used to study peptide-containing lipid bilayers. DSC showed that MSI-78 increased the fluid lamellar to inverted hexagonal phase transition temperature of 1,2-dipalmitoleoyl-phosphatidylethanolamine indicating the peptide induces positive curvature strain in lipid bilayers. (31)P-NMR of lipid bilayers composed of MSI-78 and 1-palmitoyl-2-oleoyl-phosphatidylethanolamine demonstrated that the peptide inhibited the fluid lamellar to inverted hexagonal phase transition of 1-palmitoyl-2-oleoyl-phosphatidylethanolamine, supporting the DSC results, and the peptide did not induce the formation of nonlamellar phases, even at very high peptide concentrations (15 mol %). (31)P-NMR of samples containing 1-palmitoyl-2-oleoyl-phosphatidylcholine and MSI-78 revealed that MSI-78 induces significant changes in the bilayer structure, particularly at high peptide concentrations. At lower concentrations (1-5%), the peptide altered the morphology of the bilayer in a way consistent with the formation of a toroidal pore. Higher concentrations of peptide (10-15%) led to the formation of a mixture of normal hexagonal phase and lamellar phase lipids. This work shows that MSI-78 induces significant changes in lipid bilayers via positive curvature strain and presents a model consistent with both the observed spectral changes and previously published work.     

Antimicrobial activity and membrane selective interactions of a synthetic lipopeptide MSI-843

Lipopeptide MSI-843 consisting of the nonstandard amino acid ornithine (Oct-OOLLOOLOOL-NH₂) was designed with an objective towards generating non-lytic short antimicrobial peptides, which can have significant pharmaceutical applications. Octanoic acid was coupled to the N-terminus of the peptide to increase the overall hydrophobicity of the peptide. MSI-843 shows activity against bacteria and fungi at micromolar concentrations. It permeabilizes the outer membrane of Gram-negative bacterium and a model membrane mimicking bacterial inner membrane. Circular dichroism investigations demonstrate that the peptide adopts α-helical conformation upon binding to lipid membranes. Isothermal titration calorimetry studies suggest that the peptide binding to membranes results in exothermic heat of reaction, which arises from helix formation and membrane insertion of the peptide. ²H NMR of deuterated-POPC multilamellar vesicles shows the peptide-induced disorder in the hydrophobic core of bilayers. ³¹P NMR data indicate changes in the lipid head group orientation of POPC, POPG and Escherichia colitotal lipid bilayers upon peptide binding. Results from ³¹P NMR and dye leakage experiments suggest that the peptide selectively interacts with anionic bilayers at low concentrations (up to 5 mol%). Differential scanning calorimetry experiments on DiPOPE bilayers and ³¹P NMR data from E.coli total lipid multilamellar vesicles indicate that MSI-843 increases the fluid lamellar to inverted hexagonal phase transition temperature of bilayers by inducing positive curvature strain. Combination of all these data suggests the formation of a lipid-peptide complex resulting in a transient pore as a plausible mechanism for the membrane permeabilization and antimicrobial activity of the lipopeptide MSI-843.     

Partitioning of ABA into bilayers of Di-saturated phosphatidylcholines as measured by DSC

Using differential scanning calorimetry, we have investigated partitioning of the plant hormone abscisic acid into a homologous series of di-saturated phosphatidylcholines increasing in chain length from C(14) to C(19). Partition coefficients calculated from the shift in T(m) range from 1280 for DiC(14)PC to 480 for DiC(19)PC. The free energy of transfer is chain-length independent with a value of DeltaG = -17.4 kJ/mol and an enthalpic contribution of DeltaH = -22.6 kJ/mol. The low net entropic contribution of -TDeltaS = -5.2 J/mol agrees with the concept of the bilayer effect, but differs from that of the entropy-driven classic hydrophobic effect valid for partitioning between bulk solvents. Preferential location of the hormone in the outer region of the membrane is indicated by characteristic changes in the transition profiles and by comparison with partitioning into organic solvents whose dielectric constants model the interior and exterior regions of the bilayer. Differences in partitioning and surface pKa between the biologically active ct-ABA and the inactive tt-isomer are discussed for biological relevance.     

Cholesterol-induced protein sorting: an analysis of energetic feasibility

The mechanism(s) underlying the sorting of integral membrane proteins between the Golgi complex and the plasma membrane remain uncertain because no specific Golgi retention signal has been found. Moreover one can alter a protein's eventual localization simply by altering the length of its transmembrane domain (TMD). M. S. Bretscher and S. Munro (SCIENCE: 261:1280-1281, 1993) therefore proposed a physical sorting mechanism based on the hydrophobic match between the proteins' TMD and the bilayer thickness, in which cholesterol would regulate protein sorting by increasing the lipid bilayer thickness. In this model, Golgi proteins with short TMDs would be excluded from cholesterol-enriched domains (lipid rafts) that are incorporated into transport vesicles destined for the plasma membrane. Although attractive, this model remains unproven. We therefore evaluated the energetic feasibility of a cholesterol-dependent sorting process using the theory of elastic liquid crystal deformations. We show that the distribution of proteins between cholesterol-enriched and cholesterol-poor bilayer domains can be regulated by cholesterol-induced changes in the bilayer physical properties. Changes in bilayer thickness per se, however, have only a modest effect on sorting; the major effect arises because cholesterol changes also the bilayer material properties, which augments the energetic penalty for incorporating short TMDs into cholesterol-enriched domains. We conclude that cholesterol-induced changes in the bilayer physical properties allow for effective and accurate sorting which will be important generally for protein partitioning between different membrane domains.