A new thermoactive pullulanase from Desulfurococcus mucosus: cloning, sequencing, purification, and characterization of the recombinant enzyme after expression in Bacillus subtilis

The gene encoding a thermoactive pullulanase from the hyperthermophilic anaerobic archaeon Desulfurococcus mucosus (apuA) was cloned in Escherichia coli and sequenced. apuA from D. mucosus showed 45.4% pairwise amino acid identity with the pullulanase from Thermococcus aggregans and contained the four regions conserved among all amylolytic enzymes. apuA encodes a protein of 686 amino acids with a 28-residue signal peptide and has a predicted mass of 74 kDa after signal cleavage. The apuA gene was then expressed in Bacillus subtilis and secreted into the culture fluid. This is one of the first reports on the successful expression and purification of an archaeal amylopullulanase in a Bacillus strain. The purified recombinant enzyme (rapuDm) is composed of two subunits, each having an estimated molecular mass of 66 kDa. Optimal activity was measured at 85 degrees C within a broad pH range from 3.5 to 8.5, with an optimum at pH 5.0. Divalent cations have no influence on the stability or activity of the enzyme. RapuDm was stable at 80 degrees C for 4 h and exhibited a half-life of 50 min at 85 degrees C. By high-pressure liquid chromatography analysis it was observed that rapuDm hydrolyzed alpha-1,6 glycosidic linkages of pullulan, producing maltotriose, and also alpha-1,4 glycosidic linkages in starch, amylose, amylopectin, and cyclodextrins, with maltotriose and maltose as the main products. Since the thermoactive pullulanases known so far from Archaea are not active on cyclodextrins and are in fact inhibited by these cyclic oligosaccharides, the enzyme from D. mucosus should be considered an archaeal pullulanase type II with a wider substrate specificity.     

Molecular cloning and biochemical characterization of a heat-stable type I pullulanase from Thermotoga neapolitana

The gene encoding a type I pullulanase from the hyperthermophilic anaerobic bacterium Thermotoga neapolitana (pulA) was cloned in Escherichia coli and sequenced. The pulA gene from T. neapolitana showed 91.5% pairwise amino acid identity with pulA from Thermotoga maritima and contained the four regions conserved in all amylolytic enzymes. pulA encodes a protein of 843 amino acids with a 19-residue signal peptide. The pulA gene was subcloned and overexpressed in E. coli under the control of the T7 promoter. The purified recombinant enzyme (rPulA) produced a 93-kDa protein with pullulanase activity. rPulA was optimally active at pH 5-7 and 80°C and had a half-life of 88 min at 80°C. rPulA hydrolyzed pullulan, producing maltotriose, and hydrolytic activities were also detected with amylopectin, starch, and glycogen, but not with amylose. This substrate specificity is typical of a type I pullulanase. Thin layer chromatography of the reaction products in the reaction with pullulan and aesculin showed that the enzyme had transglycosylation activity. Analysis of the transfer product using NMR and isoamylase treatment revealed it to be α-maltotriosyl-(1,6)-aesculin, suggesting that the enzyme transferred the maltotriosyl residue of pullulan to aesculin by forming α-1,6-glucosidic linkages. Our findings suggest that the pullulanase from T. neapolitana is the first thermostable type I pullulanase which has α-1,6-transferring activity.     

Purification and Properties of a Thermostable Pullulanase from a Newly Isolated Thermophilic Anaerobic Bacterium, Fervidobacterium pennavorans Ven5

Extremely thermophilic anaerobic fermentative bacteria growing at temperatures between 50 and 80(deg)C (optimum, 65 to 70(deg)C) were isolated from mud samples collected at Abano Terme spa (Italy). The cells were gram-negative motile rods, about 1.8 (mu)m in length and 0.6 (mu)m in width, occurring singly and in pairs. Cells commonly formed spheroids at one end similar to Fervidobacterium islandicum and Fervidobacterium nodosum. The new isolate differs from F. nodosum by the 7% higher G+C content of its DNA (40.6 mol%) but is similar to Fervidobacterium pennavorans and F. islandicum in its G+C content and phenotypic properties. The phylogenetic dendrogram indicates that strain Ven5 belongs to the order Thermotogales and shows the highest 16S ribosomal DNA sequence similarity to F. pennavorans, F. islandicum, and F. nodosum, with similarities of 99.0, 98.6, and 96.0%, respectively. During growth on starch the strain produced a thermostable pullulanase of type I which preferentially hydrolyzed (alpha)-1,6 glucosidic linkages. The enzyme was purified 65-fold by anion-exchange, gel permeation, and hydrophobic chromatography. The native pullulanase has a molecular mass of 240,000 Da and is composed of three subunits, each with a molecular mass of 77,600 Da as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Optimal conditions for the activity and stability of the purified pullulanase were pH 6.0 and 85(deg)C. At pH 6.0, the half-life of the enzyme was over 2 h at 80(deg)C and 5 min at 90(deg)C. This is the first report on the presence of pullulanase type I in an anaerobic bacterium.     

Characterization and expression of the structural gene for pullulanase, a maltose-inducible secreted protein of Klebsiella pneumoniae.

Some strains of Klebsiella pneumonia secrete pullulanase, a debranching enzyme which produces linear molecules (maltodextrins, amylose) from amylopectin and glycogen. pulA, the structural gene for pullulanase, was introduced into Escherichia coli, either on a multiple-copy-number plasmid or as a single copy in the chromosome. When in E. coli, pulA was controlled by malT, the positive regulatory gene of the maltose regulon. Indeed, pulA expression was undetectable in a malT-negative mutant and constitutive in a malTc strain. Furthermore, the plasmid carrying pulA titrated the MalT protein. When produced in E. coli, pullulanase was not localized in the same way as in K. pneumoniae. In the latter case it was first exported to the outer membrane, with which it remained loosely associated, and was then released into the growth medium. In E. coli the enzyme was distributed both in the inner and the outer membranes and was never released into the growth medium.     

Cloning, sequencing, and characterization of a heat- and alkali-stable type I pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70 degrees C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg'). The N-terminal sequence of purified rPulAg' was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg' were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, beta-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg' was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

蜡样芽胞杆菌GXBC-3三个普鲁兰酶基因的表达及其酶学特性

探索获得优良的新型普鲁兰酶基因,丰富普鲁兰酶理论,对实现普鲁兰酶国产化具有重要意义。分析GenBank数据库中蜡样芽胞杆菌假定Ⅰ型、Ⅱ型普鲁兰酶基因序列,从实验室保藏的蜡样芽胞杆菌Bacilluscereus GXBC-3中克隆得到3个普鲁兰酶基因pulA、pulB、pulC,并分别导入大肠杆菌进行胞内诱导表达。纯化重组酶酶学性质研究表明重组酶PulA能水解α-l,6-和α-l,4-糖苷键,为Ⅱ型普鲁兰酶,以普鲁兰糖为底物时,最适反应温度及pH分别为40℃和6.5,比活力为32.89 U/mg;以可溶性淀粉为底物时,最适反应温度及pH分别为50℃和7.0,比活力为25.71 U/mg。重组酶PulB和PulC二者均只能水解α-l,6-糖苷键,为I型普鲁兰酶,以普鲁兰糖为底物时,其最适反应温度及pH分别为45℃、7.0和45℃、6.5,比活力分别为228.54 U/mg和229.65 U/mg。     

Cloning and expression in Escherichia coli of the Klebsiella pneumoniae genes for production, surface localization and secretion of the lipoprotein pullulanase.

This article describes the reconstitution in Escherichia coli of a heterologous protein secretion system comprising a gene for an extracellular protein together with its cognate secretion genes. The protein concerned, pullulanase, is a secreted lipoprotein of the Gram-negative bacterium Klebsiella pneumoniae. It is initially localized to the cell surface before being specifically released into the medium. E. coli carrying the cloned pullulanase structural gene (pulA) produces pullulanase but does not expose or secrete it. Secretion genes were cloned together with pulA in an 18.8 kbp fragment of K. pneumoniae chromosomal DNA. E. coli carrying this fragment exhibited maltose-inducible production, exposition and specific secretion of pullulanase. Transposon mutagenesis showed that the secretion genes are located on both sides of pulA. Secretion genes located 5' to pulA were transcribed in the opposite orientation to pulA under the control of the previously identified, malT-regulated malX promoter. Thus these secretion genes are part of the maltose regulon and are therefore co-expressed with pulA. Transposon mutagenesis suggested that secretion genes located 3' of pulA are not co-transcribed with pulA, raising the possibility that some secretion functions are not maltose regulated.     

Structure of the gene encoding cyclomaltodextrinase from Clostridium thermohydrosulfuricum 39E and characterization of the enzyme purified from Escherichia coli.

Clostridium thermohydrosulfuricum 39E, a gram-positive thermophilic anaerobic bacterium, produced a cyclodextrin (CD)-degrading enzyme, cyclodextrinase (CDase) (EC 3.2.1.54). The enzyme was purified to homogeneity from Escherichia coli cells carrying a recombinant multicopy plasmid that contained the gene encoding for thermophilic CDase. The purified enzyme was a monomer with an M(r) of 66,000 +/- 2,000. It showed the highest activity at pH 5.9 and 65 degrees C. The enzyme hydrolyzed alpha-, beta-, and gamma-CD and linear maltooligosaccharides to yield maltose and glucose. The Km values for alpha-, beta-, and gamma-CD were 2.5, 2.1, and 1.3 mM, respectively. The rates of hydrolysis for polysaccharides (starch, amylose, amylopectin, and pullulan) were less than 5% of the rate of hydrolysis for alpha-CD. The entire nucleotide sequence of the CDase gene was determined. The deduced amino acid sequence of CDase, consisting of 574 amino acids, showed some similarities with those of various amylolytic enzymes.     

Pullulanase of Thermoanaerobacterium thermosulfurigenes EM1 (Clostridium thermosulfurogenes): molecular analysis of the gene, composite structure of the enzyme, and a common model for its attachment to the cell surface.

The complete pullulanase gene (amyB) from Thermoanaerobacterium thermosulfurigenes EM1 was cloned in Escherichia coli, and the nucleotide sequence was determined. The reading frame of amyB consisted of 5,586 bp encoding an exceptionally large enzyme of 205,991 Da. Sequence analysis revealed a composite structure of the pullulanase consisting of catalytic and noncatalytic domains. The N-terminal half of the protein contained a leader peptide of 35 amino acid residues and the catalytic domain, which included the four consensus regions of amylases. Comparison of the consensus regions of several pullulanases suggested that enzymes like pullulanase type II from T. thermosulfurigenes EM1 which hydrolyze alpha-1,4- and alpha-1,6-glycosidic linkages have specific amino acid sequences in the consensus regions. These are different from those of pullulanases type I which only cleave alpha-1,6 linkages. The C-terminal half, which is not necessary for enzymatic function, consisted of at least two different segments. One segment of about 70 kDa contained two copies of a fibronectin type III-like domain and was followed by a linker region rich in glycine, serine, and threonine residues. At the C terminus, we found three repeats of about 50 amino acids which are also present at the N-termini of surface layer (S-layer) proteins of, e.g., Thermus thermophilus and Acetogenium kivui. Since the pullulanase of T. thermosulfurigenes EM1 is known to be cell bound, our results suggest that this segment serves as an S-layer anchor to keep the pullulanase attached to the cell surface. Thus, a general model for the attachment of extracellular enzymes to the cell surface is proposed which assigns the S-layer a new function and might be widespread among bacteria with S-layers. The triplicated S-layer-like segment is present in several enzymes of different bacteria. Upstream of amyB, another open reading frame, coding for a hypothetical protein of 35.6 kDa, was identified. No significant similarity to other sequences available in DNA and protein data bases was found.     

Purification and Characterization of Thermostable Pullulanase from Bacillus stearothermophilus and Molecular Cloning and Expression of the Gene in Bacillus subtilis

A thermostable pullulanase (alpha-dextrin 6-glucanohydrolase [EC 3.2.1.41]) from a newly isolated Bacillus stearothermophilus strain (TRS128) was purified and characterized. The enzyme hydrolyzed (1-->6)-alpha-d-glucosidic linkages of pullulan to produce maltotriose, and the optimum temperature was 65 degrees C. About 90% of the enzyme activity was retained after treatment at 65 degrees C for 60 min. By using pTB522 as a vector plasmid, the pullulanase gene was cloned and expressed in Bacillus subtilis.     

Cloning, expression and biochemical characterisation of a unique thermostable pullulan-hydrolysing enzyme from the hyperthermophilic archaeon Thermococcus aggregans

The gene for a new type of pullulan hydrolase from the hyperthermophilic archaeon Thermococcus aggregans was cloned and expressed in Escherichia coli. The 2181-bp open reading frame encodes a protein of 727 amino acids. A hypothetical membrane linker region was found to be cleaved during processing in E. coli. The recombinant enzyme was purified 70-fold by heat treatment, affinity and anion exchange chromatography. Optimal activity was detected at 95 degrees C at a broad pH range from 3.5 to 8.5 with an optimum at pH 6.5. More than 35% of enzymatic activity was detected even at 120 degrees C. The enzyme was stable at 90 degrees C for several hours and exhibited a half-life of 2.5 h at 100 degrees C. Unlike all pullulan-hydrolysing enzymes described to date, the enzyme is able to attack alpha-1,6- as well as alpha-1,4-glycosidic linkages in pullulan leading to the formation of a mixture of maltotriose, panose, maltose and glucose. The enzyme is also able to degrade starch, amylose and amylopectin forming maltotriose and maltose as main products.     

Secretion of the cell surface lipoprotein pullulanase in Escherichia coli. Cooperation or competition between the specific secretion pathway and the lipoprotein sorting pathway.

The fatty acid-acylated enzyme pullulanase is normally found in either of two locations in Escherichia coli, depending on whether or not the producing strains also express the genes specifically required for the second step in pullulanase secretion. When they are expressed, the enzyme is localized to the cell surface, while in their absence, it is directed to an unidentified location in the cell envelope which, upon lysis, forms vesicles whose density is intermediate between those of outer and cytoplasmic membrane vesicles. In order to test the role of the putative lipoprotein sorting signal, Asp2, in pullulanase sorting and secretion, the structural gene (pulA) was subjected to site-directed mutagenesis. Replacement of the Asp2 residue by Asn, Glu, or Ser caused the enzyme to fractionate with outer membrane-derived vesicles rather than with intermediate density vesicles from E. coli cells devoid of pullulanase secretion genes. A pronounced secretion defect was observed in a two-step secretion assay in which the first (sec gene-dependent) and second (pul gene-dependent) secretion steps were uncoupled. We propose that the Asp residue increases the efficiency of pullulanase secretion by allowing the enzyme to be initially sorted to a region of the cell envelope wherein most of the pullulase-specific secretion factors are located.     

Cloning, Sequencing, and Characterization of a Heat- and Alkali-Stable Type I Pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70°C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg′). The N-terminal sequence of purified rPulAg′ was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg′ were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, β-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg′ was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Klebsiella pneumoniae pulS gene encodes an outer membrane lipoprotein required for pullulanase secretion.

The product of the Klebsiella pneumoniae gene pulS, which is located downstream from the pullulanase structural gene (pulA), is essential for the cell surface localization and extracellular release of pullulanase in Escherichia coli K-12. pulS is transcribed in the opposite direction to pulA, from which it is separated by a region of 624 nucleotides. Although this latter region contains a new component of the maltose regulon, pulB, which is transcribed from the pulA promoter, it is not required for pullulanase synthesis or secretion. Unlike pulA and all other pullulanase secretion genes characterized so far, the expression of pulS is not induced by growth in the presence of maltose and is unaffected by mutations in the maltose regulator gene malT. The pulS gene product was identified as a ca. 12-kilodalton outer membrane lipoprotein. The characterization of PulS brings to three the number of identified proteins which are known to be required for pullulanase secretion in addition to the components of the signal sequence-dependent general protein export pathway.     

On the biosynthesis of alternating alpha-2,9/alpha-2,8 heteropolymer of sialic acid catalyzed by the sialyltransferase of Escherichia coli Bos-12.

Escherichia coli Bos-12 synthesizes a heteropolymer of sialic acids with alternating alpha-2,9/alpha-2,8 glycosidic linkages (1). In this study, we have shown that the polysialyltransferase of the E. coli Bos-12 recognizes an alpha-2,8 glycosidic linkage of sialic acid at the nonreducing end of an exogenous acceptor of either the alpha-2,8 homopolymer of sialic acid or the alternating alpha-2,9/alpha-2,8 heteropolymer of sialic acid and catalyzes the transfer of Neu5Ac from CMP-Neu5Ac to this residue. When the exogenous acceptor is an alpha-2,8-linked oligomer of sialic acid, the main product synthesized is derived from the addition of a single residue of [14C]Neu5Ac to form either an alpha-2,8 glycosidic linkage or an alpha-2,9 glycosidic linkage at the nonreducing end, at an alpha-2, 8/alpha-2,9 ratio of approximately 2:1. When the acceptor is the alternating alpha-2,9/alpha-2,8 heteropolymer of sialic acid, chain elongation takes place four to five times more efficiently than the alpha-2,8-linked homopolymer of sialic acid as an acceptor. It was found that the alpha-2,9-linked homopolymer of sialic acid and the alpha-2,8/alpha-2,9-linked hetero-oligomer of sialic acid with alpha-2,9 at the nonreducing end not only failed to serve as an acceptor for the E. coli Bos-12 polysialyltransferase for the transfer of [14C]Neu5Ac, but they inhibited the de novo synthesis of polysialic acid catalyzed by this enzyme. The results obtained in this study favor the proposal that the biosynthesis of the alpha-2, 9/alpha-2,8 heteropolymer of sialic acid catalyzed by the E. coli Bos-12 polysialyltransferase involves a successive transfer of a preformed alpha-2,8-linked dimer of sialic acid at the nonreducing terminus of the acceptor to form an alpha-2,9 glycosidic linkage between the incoming dimer and the acceptor. The glycosidic linkage at the nonreducing end of the alternating alpha-2,9/alpha-2,8 heteropolymer of sialic acid produced by E. coli Bos-12 should be an alpha-2,8 glycosidic bond and not an alpha-2,9 glycosidic linkage.     

Export and secretion of the lipoprotein pullulanase by Klebsiella pneumoniae

Pullulanase, a secreted lipoprotein of Klebsiella pneumoniae, is initially localized to the outer face of the outer membrane, as shown by protease and substrate accessibility and by immunofluorescence tests. Freeze-thaw disruption of these cells released both membrane-associated and apparently soluble forms of pullulanase. Membrane-associated pullulanase co-fractionated with authentic outer membrane vesicles upon isopycnic sucrose-gradient centrifugation, whereas the quasi-soluble form had the same equilibrium density as inner membrane vesicles and extracellular pullulanase aggregates. The latter also contained outer membrane maltoporin, but were largely devoid of other membrane components including LPS and lipids. K. pneumoniae carrying multiple copies of the pullulanase structural gene (pulA) produced increased amounts of cell-associated and secreted pullulanase, but a large proportion of the enzyme was neither exposed on the cell surface nor released into the medium, even after prolonged incubation. This suggests that factors necessary for pullulanase secretion were saturated by the over-produced pullulanase. When pulA was expressed under lacZ promotor control, the pullulanase which was produced was not exposed on the cell surface at any time, suggesting that pullulanase secretion genes are not expressed constitutively, and raising the possibility that they, like pulA, may be part of the maltose regulon.     

Entire nucleotide sequence of the pullulanase gene of Klebsiella aerogenes W70.

We determined the entire nucleotide sequence of the Klebsiella aerogenes W70 pullulanase gene (pulA) contained on a 4.2-kilobase-pair fragment of plasmid pPB174. The amino acid composition deduced from an open reading frame of 3,288 base pairs agreed closely with that determined for the intracellular pullalanase. The precursor enzyme consisted of 1,096 amino acid residues and contained a hydrophobic N-terminal signal peptide and the consensus sequence for the bacterial prelipoprotein signal peptide cleavage site.     

Isolation and characteristics of thermostable pullulanase from Clostridium thermohydrosulfuricum produced by Escherichia coli cells

The expressed gene (pul) for a thermostable pullulanase from Clostridium thermohydrosulfuricum was cloned into Escherichia coli. The enzyme was purified from cell extracts of E. coli by thermoinactivation, ammonium sulphate precipitation and gel exclusion. The purified enzyme was characterized as monomer with both pullulanase and glucoamylase activities. The general physico-chemical and catalytic properties of this enzyme were obtained. In particular, pullulanase and glucoamylase activities were stable and optimally active at 65 degrees C. The pH optimum for activity was 5.8. The amino acid composition and amino acid sequence of N-terminal end were estimated.     

Collagen-like sequences stabilize homotrimers of a bacterial hydrolase.

Pullulanase from Klebsiella pneumoniae strain FG9 has an unusual N-terminal amino acid sequence that includes six repeats of the tripeptide Gly-X-Pro. This type of sequence is characteristic of animal collagens and collagen-like proteins which form triple helical structures. We have investigated the molecular organization of this bacterial pullulanase isolated from the cell surface of Escherichia coli cells that carry the cloned FG9 pulA (pullulanase encoding) gene. Non-denaturing polyacrylamide gel analysis shows that pullulanase exists as higher order, apparently homogeneous, structures. We have used highly purified bacterial collagenase to probe the role of the collagen-like region and we demonstrate that this feature is essential for non-covalent association of pullulanase homotrimers. In addition we show collagenase-specific release of cell-bound pullulanase.