Adsorption of papain with Cibacron Blue F3GA carrying chitosan-coated nylon affinity membranes

Covalent coupling of chitosan (CS) to activated nylon membrane was performed after the reaction of the microporous nylon membrane with formaldehyde. Non-specific adsorption on the CS-coated nylon membrane decreased greatly, compared with plain nylon membrane. The dye Cibacron Blue F3GA (CB F3GA) as a ligand was then covalently immobilized on the CS-coated membranes. Physical properties of the composite membrane and its applications in affinity membrane chromatography were examined. The contents of CS and CB F3GA-attached membranes were 89.6 mg/g nylon membrane and 146.1 micromol/g nylon membrane, respectively. These CB F3GA-attached composite membranes were used in the papain adsorption studies. Higher papain adsorption capacity, up to 235.3mg/g affinity membrane, was obtained. The adsorption isotherm fitted the Freundlich model well. Significant amount of the adsorbed papain (about 94.3%) was eluted by 1.0M NaSCN at pH 9.0. Experiments on regeneration and dynamic adsorption were also performed. It appears that CB F3GA-CS nylon membranes can be applied for papain separation without causing any denaturation.     

Oriented immobilization of bacterial photosynthetic membrane

Summary We have examined a method for oriented immobilization of photosynthetic membrane fragments on a solid surface by specific avidin-biotin interaction. Photosynthetic membrane fragments from the purple non-sulphur photosynthetic bacterium Rhodopseudomonas viridis, of which the H-subunit of the photosynthetic reaction centre was biotinylated, was immobilized on an avidin-adsorbed plate. Orientation of the immobilized membrane on the plastic plate was checked by an antisera binding assay that could react to the respective sides of the membrane: the H-subunit side was selectively adsorbed on the plate. Light-induced potential and current responses could be measured when the membrane immobilized on the SnO₂-coated glass plate was dried and sandwiched with a counter electrode of Hg. The electrical response in the immobilized membrane was much improved in comparison with the control (membranes were simply adsorbed on the plate), supporting the idea that the membranes have an orientation on solid surfaces.Offprint requests to: M. Hara     

Direct mediatorless electron transport between the monolayer of photosystem II and poly(mercapto-p-benzoquinone) modified gold electrode--new design of biosensor for herbicide detection

Photosystem II (PSII) modified gold electrodes have been prepared providing mediatorless electron transport on the basis of electrodeposited conductive layer poly-mercapto-p-benzoquinone (polySBQ). Such electrodes are suitable in construction of biosensors for PSII inhibiting herbicides. PolySBQ layer was synthesized on (i) screen-printed gold electrodes and (ii) gold microelctodes in an array on silicon substrate, by electrochemical-oxidation of sulpho-p-benzoquinone (SBQ) at +650 mV versus Ag/AgCl. The basic properties of polySBQ layer were characterized using linear sweep voltammetry and atomic force microscopy (AFM). The typical redox response for quinones was observed. The optimal length of the polymer providing direct electron transfer (DET) was found to be very close to 30 nm. PSII particles isolated from the thermophilic cyanobacteria Synechococcus bigranulatus were physically adsorbed on the polySBQ covered gold electrodes. The generation of photocurrent was observed at E=+250 mV (versus Ag/AgCl) without addition of any mediator. The basic properties of DET were studied. We concluded that: (i) PSII active in DET is immobilized in form of monolayer; (ii) the charge transport from PSII to gold working electrode (AuWE) is fast and dominated by the rate of the enzymatic reaction; (iii) polySBQ layer drains electrons from the Q(A) pocket of the photosystem since the electrode activity is inhibited by specific inhibitor, i.e. diuron (DCMU); (iv) the stability of the photosystem immobilized on gold electrodes by using polySBQ is comparable to the stability of PSII in solution under the same experimental conditions; (v) the inhibition of the photosystem by herbicide DCMU follows the sigmoid dependence; (vi) I(50) as well as limit of detection (LOD) show an improved sensitivity compared to other published biosensing systems using PSII as bioactive part.     

A cross-flow reactor with immobilized pectolytic enzymes for juice clarification

Summary A new system for continuous juices clarification is presented. The bioreactor combines microporous plates commercially available and industrial pectinases immobilized on nylon membranes in a cross-flow configuration. The kinetic behaviour of the reactor for different recirculation flow rates has been determined. Fresh apricot juice has been continuously clarified in the bioreactor with excellent results.     

Channel activity of a phytotoxin of Clavibacter michiganense ssp. nebraskense in tethered membranes

Solid-supported membranes immobilized on gold electrodes were used to detect and characterize the spontaneously inserting anion-selective protein channel (Clavibacter anion channel, CAC) present in the culture fluid of Clavibacter michiganense ssp. nebraskense. Three different membrane systems varying in the composition of the first chemisorbed monolayer were investigated by means of impedance spectroscopy. Conductance changes of the immobilized lipid membranes were sensitively detected after adding the culture fluid of the bacteria to the solid-supported membranes, indicating that the relative change in conductance is largest if the lipid layer is attached to the surface via a flexible lipid anchor. Variation in the d.c. potential revealed that CAC exhibits a voltage dependence in these tethered membranes which can be described by an exponential function in accordance with previous results obtained from patchclamp measurements and impedance analysis. The addition of an inhibitor that selectively blocks anion channels abolished the channel conductance almost completely, indicating that the increased conductivity can be attributed to the specific insertion of the CAC. A linear dependence of the channel conductance on the chloride concentration was found, which was modulated by the charges of the second lipid monolayer. The results demonstrate that tethered lipid membranes on gold surfaces in conjunction with impedance spectroscopy allows one to monitor and characterize water-soluble spontaneously inserting channels, providing an effective means to probe for bacterial toxins.     

Impact of protein fouling on nanoparticle capture within the Viresolve® Pro and Viresolve® NFP virus removal membranes

Virus filtration is a robust size-based technique that can provide the high level of viral clearance required for the production of mammalian-derived biotherapeutics such as monoclonal antibodies. Several studies have shown that the retention characteristics of some, but not all, virus filters can be significantly affected by membrane fouling, but there have been no direct measurements of how protein fouling might alter the location of virus capture within these membranes. The objective of this study was to directly examine the effect of protein fouling by human immunoglobulin G (IgG) on virus capture within the Viresolve® Pro and Viresolve® NFP membranes by scanning electron microscopy using different size gold nanoparticles. IgG fouling shifted the capture location of 20 nm gold nanoparticles further upstream within the Viresolve® Pro filter due to the constriction and/or blockage of the pores in the virus retentive region of the filter. In contrast, IgG fouling had no measurable effect on the capture of 20 nm nanoparticles in the Viresolve® NFP membrane, and IgG fouling had no effect on the capture of larger 40 and 100 nm nanoparticles in either membrane. These results provide important insights into how protein fouling alters the virus retention characteristics of different virus filters.     

Biomimetic design of nanopatterned membranes

The biomimetic approach copying the supramolecular building principle of many archaeal cell envelopes (i.e., a plasma membrane with associated S-layer proteins) has resulted in stable lipid membranes with excellent reconstitution properties for transmembrane proteins. This is a particular challenge as one-third of all proteins in an organism are membrane proteins like pores, ion channels, or receptors. At S-layer supported lipid membranes, spatial well-defined domains on the S-layer protein interact noncovalently with lipid head groups within the lipid membrane resulting in a nanopatterning of a few anchored and scores of diffusional free-lipid molecules. In addition, no impact on the hydrophobic core region and on the function of reconstituted integral proteins has been determined. Among others, particularly S-layer stabilized membranes can be used for structure-function studies on reconstituted integral proteins and also in the membrane protein-based molecular nanotechnology, e.g., in the design of biosensing devices (e.g., lipid chip or lab-on-a-chip), or for receptor or ion channel-based high-throughput screening.     

Lipid demixing and protein-protein interactions in the adsorption of charged proteins on mixed membranes

The adsorption free energy of charged proteins on mixed membranes, containing varying amounts of (oppositely) charged lipids, is calculated based on a mean-field free energy expression that accounts explicitly for the ability of the lipids to demix locally, and for lateral interactions between the adsorbed proteins. Minimization of this free energy functional yields the familiar nonlinear Poisson-Boltzmann equation and the boundary condition at the membrane surface that allows for lipid charge rearrangement. These two self-consistent equations are solved simultaneously. The proteins are modeled as uniformly charged spheres and the (bare) membrane as an ideal two-dimensional binary mixture of charged and neutral lipids. Substantial variations in the lipid charge density profiles are found when highly charged proteins adsorb on weakly charged membranes; the lipids, at a certain demixing entropy penalty, adjust their concentration in the vicinity of the adsorbed protein to achieve optimal charge matching. Lateral repulsive interactions between the adsorbed proteins affect the lipid modulation profile and, at high densities, result in substantial lowering of the binding energy. Adsorption isotherms demonstrating the importance of lipid mobility and protein-protein interactions are calculated using an adsorption equation with a coverage-dependent binding constant. Typically, at bulk-surface equilibrium (i.e., when the membrane surface is "saturated" by adsorbed proteins), the membrane charges are "overcompensated" by the protein charges, because only about half of the protein charges (those on the hemispheres facing the membrane) are involved in charge neutralization. Finally, it is argued that the formation of lipid-protein domains may be enhanced by electrostatic adsorption of proteins, but its origin (e.g., elastic deformations associated with lipid demixing) is not purely electrostatic.     

Protein binding to polymer brush,based on ion-exchange,hydrophobic, and affinity interactions

The major limitations associated with conventional packed bed chromatography for protein separation and purification can be overcome by using adsorptive microporous membranes as chromatographic media. Microporous membranes have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate diffusion limitations. As a result, higher throughput and shorter processing times are possible using these membrane systems. In this paper, we review the current state of development in the area of attaching functionalized polymer brushes onto a microporous membrane to form a novel chromatographic medium for protein separation and purification. The functionalized polymer brushes were appended onto the pore surface of a microporous hollow-fiber membrane uniformly across the membrane thickness by radiation-induced graft polymerization and subsequent chemical modifications. We review various applications of this adsorptive membrane chromatography by focusing on polymer brushes bearing ion-exchange, hydrophobic and affinity groups. Proteins were captured in multilayers by the ion-exchange group-containing polymer brushes due to the formation of a three-dimensional space for protein binding via the electrostatic repulsion of the polymer brushes. In contrast, proteins were captured in a monolayer at most by the polymer brushes containing hydrophobic or affinity ligands. By permeating a protein solution through the pores rimmed by the polymer brushes, an ideal capturing rate of the proteins with a negligible diffusional mass-transfer resistance was achieved by the functionalized polymer brushes, based on ion-exchange, hydrophobic, and affinity interactions.     

An immobilization technique yielding high enzymatic load on nylon nets

Glucose oxidase and catalase were immobilized on nylon nets by a technique using glutaraldehyde and polyethylenimine for the activation process. With this procedure it is possible to bind up to 400 mg of protein per g of support, retaining 65% of the original enzymatic activity. The membranes are mechanically resistant and suitable for the construction of long-life enzymatic electrodes.     

Yeast alcohol dehydrogenase bound to membranes: surface and microenvironment effects on activity and stability.

The enzyme, yeast alcohol dehydrogenase, was adsorbed to porous nitrocellulose and nylon membranes. The two membranes provide different surface chemistries as indicated by the results of the streaming potential, enzyme adsorption, and fluorescein isothiocyanate adsorption experiments. The stability of the enzyme, as determined by continually measuring the extent of coenzyme reduction as a function of time, appeared to be much less for the enzyme adsorbed to the positively charged membrane surface. Moreover, the enzyme adsorbed to the positively charged membrane was the least responsive to pulses of the reducing agent, dithiothreitol, and appeared to exhibit the highest transition temperature when subjected to differential scanning calorimetry analysis. These results indicate that the entropically spreading process observed for other adsorbed proteins may be occurring and the process is more rapid and extensive when enzyme is adsorbed to the nylon than the nitrocellulose membrane. In addition to the relative stability of the enzyme on two different surfaces being examined, the effect of the microenvironment on modulating the activity of the enzyme was investigated by using the reversibility of the enzyme-catalyzed reaction as a probe of the average local environment of the enzyme. It was found that a threshold buffer concentration existed that, once exceeded, the effect of proton production by the reaction could be suppressed.     

Use of surface enhanced infrared absorption spectroscopy (SEIRA) to probe the functionality of a protein monolayer

We present a novel infrared method to investigate the functionality of a protein monolayer tethered to a metal substrate. The approach employs Surface Enhanced Infrared Absorption Spectroscopy (SEIRAS), which renders high surface sensitivity by enhancing the signal of the adsorbed protein by up to approximately 2 orders of magnitude. We demonstrate that the electrochemically induced absorption changes of a cytochrome c monolayer can be observed with excellent signal-to-noise ratio when the protein is adhered to a modified gold surface. To probe membrane proteins, a concept is introduced for the oriented incorporation into solid supported lipid bilayers. Recombinant cytochrome c oxidase solubilized in detergent is immobilized on a chemically modified gold surface via the affinity of its histidine (His)-tag to a nickel-chelating nitro-triacetic acid (NTA) surface. The protein monolayer is reconstituted into the lipid environment by detergent removal. Changing the orientation of the protein with respect to the metal surface is achieved by inserting the His-tag on either side of the membrane protein surface. Orientational control is mandatory for experiments in which electrons are injected from the electrode into the protein. The presented methodology opens new avenues to study the mechanism of the biomedically relevant class of electron and voltage-gated proteins on the atomic level.     

Anionic exchange nylon laminated membranes for enzyme immobilization

Summary This work presents the optimization of the chemical steps involved in nylon modification with dimethyl sulphate, polyethyleneimine, glutaraldehyde and 2-diethyl aminoethylamine to obtain a weak basic anion exchange support. Activated nylon laminated membranes were utilized for aminoacylase immobilization, allowing an ionically adsorbed enzyme derivative with high activity (0.16 U/mg E·cm²) and low removed activity (<1%). Optimum immobilization conditions and kinetic parameters were also determined. This immobilized enzyme can be used in laminated enzyme membrane reactors.     

Evaluation of Magainin I interactions with lipid membranes: An optical and electrochemical study

Most antimicrobial peptides (AMPs) have shown clear activity related to the disruption of lipid bilayers. In order to improve knowledge of this subject, the interaction of Magainin I (MagI) with phospholipid layers (PLs), uncoated or coated with synperonic (Synp), was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and surface plasmon resonance (SPR) techniques. MagI peptide was immobilized on gold electrode via a self-assembling monolayer obtained from liposomes and liposomes covered by Synp. MagI induces pores in the supported lipid membranes, which are reflected in an increased amperometric-response and also a decreased electron-transfer resistance (R(CT)). In addition, MagI showed a significant interaction with the PL-Synp-modified gold electrode, but MagI showed a reliable contact with the PL-modified gold electrode, leading to a decrease in the relative resistance charge transfer value of -17.38%. Our results demonstrated that Synp acts as a membrane sealant after exposure of the lipid membrane to MagI. A parallel reaction model was proposed for the interaction of MagI and a hybrid layer that result in a complex bimolecular interaction. In short, the importance of triblock copolymer to stabilize liposomes for future applications as drug delivery systems for MagI was demonstrated.     

Immobilization of DNA on microporous membranes using UV-irradiation]

Various techniques of DNA immobilization onto nitrocellulose and nylon microporous membranes have been compared. Despite a strong primary adsorption of DNA onto these membranes during blotting procedures, poor retention of the target DNA and low hybridization signals are obtained after hybridization and washings. Covalent cross-linking of DNA upon UV irradiation leads to a quantitative immobilization of target DNA. Quantum yield of DNA photoimmobilization estimated for a single base in DNA is about 10(-4). UV irradiation dose sufficient for immobilization of DNA fragment of a known length can be calculated by the formula Ilc = (22.3 +/- 4.8) c/l, where l is the DNA fragment length (in base pairs), c is the DNA part (%) to be immobilized. The UV irradiation dose about 0.6-0.8 kJ/m2 is optimal for most hybridization experiments. Doses higher than 0.8-1 kJ/m2 may cause a loss in the hybridization efficiency. Under optimal immobilization conditions, hybridization signals increasing five-fold for nitrocellulose membranes and fifty-fold for uncharged nylon membranes as compared with baking these membranes in vacuum.     

Laccase immobilization on enzymatically functionalized polyamide 6,6 fibres

Polyamide matrices, such as membranes, gels and non-wovens, have been applied as supports for enzyme immobilization, although in literature the enzyme immobilization on woven nylon matrices is rarely reported. In this work, a protocol for a Trametes hirsuta laccase immobilization using woven polyamide 6,6 (nylon) was developed. A 2⁴ full factorial design was used to study the influence of pH, spacer (1,6-hexanediamine), enzyme and crosslinker concentration on the efficiency of immobilization. The factors enzyme dosage and spacer seem to have played a critical role in the immobilization of laccase onto nylon support. Under optimized working conditions (29 U mL⁻¹ of laccase, 10% of glutaraldehyde, pH = 5.5, with the presence of the spacer), the half-life time attained was about 78 h (18% higher than that of free enzyme), the protein retention was 30% and the immobilization yield was 2%. The immobilized laccase has potential for application in the continuous decolourization of textile effluents, where it can be applied into a membrane reactor.     

Protein fractionation using fast flow immobilized metal chelate affinity membranes

A new group-specific affinity membrane using metal chelates as ligands and inorganic glass hollow fiber microfiltration membranes as support matrices is developed and tested. The study focused on developing the optimum activation and coupling procedures to bind the chelating agent (iminodiacetic acid, IDA) to the surface of the microporous glass hollow fiber membrane and testing the resultant affinity membrane. Starting with three different glass surfaces, five modification reactions were evaluated. All the modified "active surfaces" were first tested for their protein adsorptive properties in batch mode with suspended microporous glass grains using model proteins with known binding characteristics with Cu-IDA systems. The metal loading capacities of the surfaces exhibiting favorable fractionation were then measured by atomic absorption spectroscopy.The results were compared with the results obtained with a commercial material used in immobilized metal affinity column chromatography. The protein binding characteristics of the hollow fiber affinity membranes were also evaluated under conditions of convective flow. This was performed by flowing single solute protein solutions through the microporous membrane at different flow rates. These results were then used to estimate the optimum loading and elution times for the process. A mathematical model incorporating radial diffusion was solved using a finite difference discretization method. Comparison between model predictions and experimental results was performed for four different proteins at one flow rate. These results suggested that the kinetics of adsorption was concentration dependent. Finally, the hollow fiber affinity membranes were challenged with two component mixtures to test their ability to fractionate mixed protein solutions. Efficient separation and good purity were obtained.The results presented here represent the development of a new fast flow affinity membrane process-immobilized metal affinity membranes (IMAM). (c) 1994 John Wiley & Sons, Inc.     

Preparation of immuno-affinity membranes for cholesterol removal from human plasma

Anti-low density lipoprotein antibody (anti-LDL) immobilized polyhydroxyethylmethacrylate (pHEMA) based membrane was prepared for selective removal of cholesterol from hypercholesterolemic human plasma. In order to further increase blood-compatibility, a newly synthesized comonomer, methacryloylamidophenylalanine (MAPA) was included in the membrane formulation. p(HEMA-MAPA) membranes were produced by a photopolymerization and then characterized by swelling tests, SEM and contact angle studies. Blood-compatibility tests were also investigated. The water swelling ratio of the p(HEMA-MAPA) membrane increases significantly (133.2.9%) compared with pHEMA (58%). p(HEMA-MAPA) membranes have large pores around in the range of 5-10 microm. All the clotting times increased when compared with pHEMA membranes. Loss of platelets and leukocytes was very low. The maximum anti-LDL antibody immobilization was achieved around pH 7.0. Immobilization of anti-LDL antibody was 12.6 mg/ml. There was a very low non-specific cholesterol adsorption onto the plain p(HEMA-MAPA) membranes, about 0.36 mg/ml. Anti-LDL antibody immobilized membranes adsorbed in the range of 4.5-7.2 mg cholesterol/ml from hypercholesterolemic human plasma. Up to 95% of the adsorbed LDL antibody was desorbed. The adsorption-desorption cycle was repeated 10 times using the same membrane. There was no significant loss in the adsorption capacity.     

Photocurrents generated by bacteriorhodopsin adsorbed on nano-black lipid membranes

Purple membranes were adsorbed on freestanding lipid bilayers, termed nano-black lipid membranes (nano-BLMs), suspending the pores of porous alumina substrates with average pore diameters of 280 nm. Nano-BLMs were obtained by first coating the upper surface of the highly ordered porous alumina substrates with a thin gold layer followed by chemisorption of 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol and subsequent addition of a droplet of 1,2-diphytanoyl-sn-glycero-3-phosphocholine and octadecylamine dissolved in n-decane onto the hydrophobic submonolayer. By means of impedance spectroscopy, the quality of the nano-BLMs was verified. The electrical parameters confirm the formation of single lipid bilayers with high membrane resistances covering the porous matrix. Adsorption of purple membranes on the nano-BLMs was followed by recording the photocurrents generated by bacteriorhodopsin upon continuous light illumination. The membrane system exhibits a very high long-term stability with the advantage that not only transient but also stationary currents are recordable. By adding the proton ionophore carbonyl cyanide-m-chlorophenylhydrazone the conductivity of the nano-BLMs increases, resulting in a higher stationary current, which proves that proton conductance occurs across the nano-BLMs.     

Non-isothermal cephalexin hydrolysis by penicillin G acylase immobilized on grafted nylon membranes

A new catalytic membrane has been prepared using a nylon membrane grafted by γ-radiation with methylmethacrylate (MMA) and using hexamethylenediamine (HMDA) as spacer. Penicillin G acylase (PGA) and cephalexin were employed as catalyst and substrate, respectively. Cephalexin hydrolysis was studied in bioreactors operated under isothermal and non-isothermal conditions. A hydrolysis increase was found when the temperature of the warm membrane surface was kept constant and the temperature of the other membrane surface was kept at a lower value. The hydrolysis increase was linearly proportional to the applied temperature difference. Cephalexin hydrolysis increased to about 10% when a temperature difference of 1°C was applied across the catalytic membrane. These results have been attributed to the non-isothermal cephalexin transport across the membrane, i.e., to the process of thermodialysis. In this way, the enzyme immobilized on and into the membrane reacts with a substrate concentration higher than that produced by simple diffusion under isothermal conditions.