A new look at the microtubule binding patterns of dimeric kinesins

The interactions of monomeric and dimeric kinesin and ncd constructs with microtubules have been investigated using cryo-electron microscopy (cryo-EM) and several biochemical methods. There is a good consensus on the structure of dimeric ncd when bound to a tubulin dimer showing one head attached directly to tubulin, and the second head tethered to the first. However, the 3D maps of dimeric kinesin motor domains are still quite controversial and leave room for different interpretations. Here we reinvestigated the microtubule binding patterns of dimeric kinesins by cryo-EM and digital 3D reconstruction under different nucleotide conditions and different motor:tubulin ratios, and determined the molecular mass of motor-tubulin complexes by STEM. Both methods revealed complementary results. We found that the ratio of bound kinesin motor-heads to alphabeta-tubulin dimers was never reaching above 1.5 irrespective of the initial mixing ratios. It appears that each kinesin dimer occupies two microtubule-binding sites, provided that there is a free one nearby. Thus the appearances of different image reconstructions can be explained by non-specific excess binding of motor heads. Consequently, the use of different apparent density distributions for docking the X-ray structures onto the microtubule surface leads to different and mutually exclusive models. We propose that in conditions of stoichiometric binding the two heads of a kinesin dimer separate and bind to different tubulin subunits. This is in contrast to ncd where the two heads remain tightly attached on the microtubule surface. Using dimeric kinesin molecules crosslinked in their neck domain we also found that they stabilize protofilaments axially, but not laterally, which is a strong indication that the two heads of the dimers bind along one protofilament, rather than laterally bridging two protofilaments. A molecular walking model based on these results summarizes our conclusions and illustrates the implications of symmetry for such models.     

Importance of a flexible hinge near the motor domain in kinesin-driven motility.

Conventional kinesin is a molecular motor consisting of an N-terminal catalytic motor domain, an extended stalk and a small globular C-terminus. Whereas the structure and function of the catalytic motor domain has been investigated, little is known about the function of domains outside the globular head. A short coiled-coil region adjacent to the motor domain, termed the neck, is known to be important for dimerization and may be required for kinesin processivity. We now provide evidence that a helix-disrupting hinge region (hinge 1) that separates the neck from the first extended coiled-coil of the stalk plays an essential role in basic motor activity. A fast fungal kinesin from Syncephalastrum racemosum was used for these studies. Deletion, substitution by a coiled-coil and truncation of the hinge 1 region all reduce motor speed and uncouple ATP turnover from gliding velocity. Insertion of hinge 1 regions from two conventional kinesins, Nkin and DmKHC, fully restores motor activity, whereas insertion of putative flexible linkers of other proteins does not, suggesting that hinge 1 regions of conventional kinesins can functionally replace each other. We suggest that this region is essential for kinesin movement in its promotion of chemo-mechanical coupling of the two heads and therefore the functional motor domain should be redefined to include not only the catalytic head but also the adjacent neck and hinge 1 domains.     

K-loop insertion restores microtubule depolymerizing activity of a "neckless" MCAK mutant

Unlike most kinesins, mitotic centromere-associated kinesin (MCAK) does not translocate along the surface of microtubules (MTs), but instead depolymerizes them. Among the motile kinesins, refinements that are unique for specific cellular functions, such as directionality and processivity, are under the control of a "neck" domain adjacent to the ATP-hydrolyzing motor domain. Despite its apparent lack of motility, MCAK also contains a neck domain. We found that deletions and alanine substitutions of highly conserved positively charged residues in the MCAK neck domain significantly reduced MT depolymerization activity. Furthermore, substitution of MCAK's neck domain with either the positively charged KIF1A K-loop or poly-lysine rescues the loss of MT-depolymerizing activity observed in the neckless MCAK mutant. We propose that the neck, analogously to the K-loop, interacts electrostatically with the tubulin COOH terminus to permit diffusional translocation of MCAK along the surface of MTs. This weak-binding interaction may also play an important role in processivity of MCAK-induced MT depolymerization.     

Unusual properties of the fungal conventional kinesin neck domain from Neurospora crassa.

Fungal conventional kinesins are unusually fast microtubule motor proteins. To compare the functional organization of fungal and animal conventional kinesins, a set of C-terminal deletion mutants of the Neurospora crassa conventional kinesin, NcKin, was investigated for its biochemical and biophysical properties. While the shortest, monomeric construct comprising the catalytic core and the neck-linker (NcKin343) displays very high steady-state ATPase (k(cat) = 260/s), constructs including both the full neck and adjacent hinge domains (NcKin400, NcKin433 and NcKin480) show wild-type behaviour: they are dimeric, show fast gliding and slower ATP turnover rates (k(cat) = 60-84/s), and are chemically processive. Unexpectedly, a construct (NcKin378, corresponding to Drosophila KHC381) that includes just the entire coiled-coil neck is a monomer. Its ATPase activity is slow (k(cat) = 27/s), and chemical processivity is abolished. Together with a structural analysis of synthetic neck peptides, our data demonstrate that the NcKin neck domain behaves differently from that of animal conventional kinesins and may be tuned to drive fast, processive motility.     

The E-hook of tubulin interacts with kinesin's head to increase processivity and speed

Kinesins are dimeric motor proteins that move processively along microtubules. It has been proposed that the processivity of conventional kinesins is increased by electrostatic interactions between the positively charged neck of the motor and the negatively charged C-terminus of tubulin (E-hook). In this report we challenge this anchoring hypothesis by studying the motility of a fast fungal kinesin from Neurospora crassa (NcKin). NcKin is highly processive despite lacking the positive charges in the neck. We present a detailed analysis of how proteolytic removal of the E-hook affects truncated monomeric and dimeric constructs of NcKin. Upon digestion we observe a strong reduction of the processivity and speed of dimeric motor constructs. Monomeric motors with truncated or no neck display the same reduction of microtubule gliding speed as dimeric constructs, suggesting that the E-hook interacts with the head only. The E-hook has no effect on the strongly bound states of NcKin as microtubule digestion does not alter the stall forces produced by single dimeric motors, suggesting that the E-hook affects the interaction site of the kinesin.ADP-head and the microtubule. In fact, kinetic and binding experiments indicate that removal of the E-hook shifts the binding equilibrium of the weakly attached kinesin.ADP-head toward a more strongly bound state, which may explain reduced processivity and speed on digested microtubules.     

X-ray structure and microtubule interaction of the motor domain of Neurospora crassa NcKin3, a kinesin with unusual processivity

Neurospora crassa kinesin NcKin3 belongs to a unique fungal-specific subgroup of small Kinesin-3-related motor proteins. One of its functions appears to be the transport of mitochondria along microtubules. Here, we present the X-ray structure of a C-terminally truncated monomeric construct of NcKin3 comprising the motor domain and the neck linker, and a 3-D image reconstruction of this motor domain bound to microtubules, by cryoelectron microscopy. The protein contains Mg.ADP bound to the active site, yet the structure resembles an ATP-bound state. By comparison with structures of the Kinesin-3 motor Kif1A in different nucleotide states (Kikkawa, M. et al. (2001) Nature (London, U.K.) 411, 439-445), the NcKin3 structure corresponds to the AMPPCP complex of Kif1A rather than the AMPPNP complex. NcKin3-specific differences in the coordination of the nucleotide and asymmetric interactions between adjacent molecules in the crystal are discussed in the context of the unusual kinetics of the dimeric wild-type motor and the monomeric construct used for crystal structure analysis. The NcKin3 motor decorates microtubules at a stoichiometry of one head per alphabeta-tubulin heterodimer, thereby forming an axial periodicity of 8 nm. In spite of unusual extensions at the N-terminus and within flexible loops L2, L8a, and L12 (corresponding to the K-loop of monomeric kinesins), the microtubule binding geometry is similar to that of other members of the kinesin family.     

Functional anatomy of the kinesin molecule in vivo.

We have developed an assay that allows the functional efficiency of mutant kinesins to be probed in vivo. We show here that the growth rate of the filamentous fungus Neurospora crassa can be used as a sensitive reporter for the ability of mutant kinesins to suppress the phenotype of the kinesin null mutant of Neurospora. Truncation mutants, internal deletion mutants and chimeras, in which homologous domains were exchanged between different fungal kinesins, were generated and transformed into the kinesin-deficient strain. None of the mutations affect motor velocity in vitro, but even minor alterations in the tail domain severely compromise kinesin's performance in vivo. The analysis of these mutants has identified subdomains in the stalk and tail likely to be involved in cargo binding and/or regulation of motor activity. The phenotypes of several mutants strongly suggest that kinesin requires a folded conformation to achieve full functionality in vivo. Folding critically depends on two flexible domains in the stalk that allow an interaction of the tail with the neck/hinge region near the catalytic motor domain. The assay has proven to be a valuable tool in the analysis of kinesin function in vivo and should help to characterize the sites involved in intra- and intermolecular interactions.     

Role of the Kinesin Neck Region in Processive Microtubule-based Motility

Kinesin is a dimeric motor protein that can move along a microtubule for several microns without releasing (termed processive movement). The two motor domains of the dimer are thought to move in a coordinated, hand-over-hand manner. A region adjacent to kinesin's motor catalytic domain (the neck) contains a coiled coil that is sufficient for motor dimerization and has been proposed to play an essential role in processive movement. Recent models have suggested that the neck enables head-to-head communication by creating a stiff connection between the two motor domains, but also may unwind during the mechanochemical cycle to allow movement to new tubulin binding sites. To test these ideas, we mutated the neck coiled coil in a 560-amino acid (aa) dimeric kinesin construct fused to green fluorescent protein (GFP), and then assayed processivity using a fluorescence microscope that can visualize single kinesin–GFP molecules moving along a microtubule. Our results show that replacing the kinesin neck coiled coil with a 28-aa residue peptide sequence that forms a highly stable coiled coil does not greatly reduce the processivity of the motor. This result argues against models in which extensive unwinding of the coiled coil is essential for movement. Furthermore, we show that deleting the neck coiled coil decreases processivity 10-fold, but surprisingly does not abolish it. We also demonstrate that processivity is increased by threefold when the neck helix is elongated by seven residues. These results indicate that structural features of the neck coiled coil, although not essential for processivity, can tune the efficiency of single molecule motility.     

These motors were made for walking

Kinesins are a diverse group of adenosine triphosphate (ATP)‐dependent motor proteins that transport cargos along microtubules (MTs) and change the organization of MT networks. Shared among all kinesins is a ~40 kDa motor domain that has evolved an impressive assortment of motility and MT remodeling mechanisms as a result of subtle tweaks and edits within its sequence. Several elegant studies of different kinesin isoforms have exposed the purpose of structural changes in the motor domain as it engages and leaves the MT. However, few studies have compared the sequences and MT contacts of these kinesins systematically. Along with clever strategies to trap kinesin–tubulin complexes for X‐ray crystallography, new advancements in cryo‐electron microscopy have produced a burst of high‐resolution structures that show kinesin–MT interfaces more precisely than ever. This review considers the MT interactions of kinesin subfamilies that exhibit significant differences in speed, processivity, and MT remodeling activity. We show how their sequence variations relate to their tubulin footprint and, in turn, how this explains the molecular activities of previously characterized mutants. As more high‐resolution structures become available, this type of assessment will quicken the pace toward establishing each kinesin's design–function relationship.     

The family-specific K-loop influences the microtubule on-rate but not the superprocessivity of kinesin-3 motors

The kinesin-3 family (KIF) is one of the largest among the kinesin superfamily and an important driver of a variety of cellular transport events. Whereas all kinesins contain the highly conserved kinesin motor domain, different families have evolved unique motor features that enable different mechanical and functional outputs. A defining feature of kinesin-3 motors is the presence of a positively charged insert, the K-loop, in loop 12 of their motor domains. However, the mechanical and functional output of the K-loop with respect to processive motility of dimeric kinesin-3 motors is unknown. We find that, surprisingly, the K-loop plays no role in generating the superprocessive motion of dimeric kinesin-3 motors (KIF1, KIF13, and KIF16). Instead, we find that the K-loop provides kinesin-3 motors with a high microtubule affinity in the motor''s ADP-bound state, a state that for other kinesins binds only weakly to the microtubule surface. A high microtubule affinity results in a high landing rate of processive kinesin-3 motors on the microtubule surface. We propose that the family-specific K-loop contributes to efficient kinesin-3 cargo transport by enhancing the initial interaction of dimeric motors with the microtubule track.     

Kinesin, 30 years later: Recent insights from structural studies

Motile kinesins are motor proteins that move unidirectionally along microtubules as they hydrolyze ATP. They share a conserved motor domain (head) which harbors both the ATP‐ and microtubule‐binding activities. The kinesin that has been studied most moves toward the microtubule (+)‐end by alternately advancing its two heads along a single protofilament. This kinesin is the subject of this review. Its movement is associated to alternate conformations of a peptide, the neck linker, at the C‐terminal end of the motor domain. Recent progress in the understanding of its structural mechanism has been made possible by high‐resolution studies, by cryo electron microscopy and X‐ray crystallography, of complexes of the motor domain with its track protein, tubulin. These studies clarified the structural changes that occur as ATP binds to a nucleotide‐free microtubule‐bound kinesin, initiating each mechanical step. As ATP binds to a head, it triggers orientation changes in three rigid motor subdomains, leading the neck linker to dock onto the motor core, which directs the other head toward the microtubule (+)‐end. The relationship between neck linker docking and the orientations of the motor subdomains also accounts for kinesin's processivity, which is remarkable as this motor protein only falls off from a microtubule after taking about a hundred steps. As tools are now available to determine high‐resolution structures of motor domains complexed to their track protein, it should become possible to extend these studies to other kinesins and relate their sequence variations to their diverse properties.     

The Role of the Kinesin-13 Neck in Microtubule Depolymerization

To ensure genetic integrity, replicated chromosomes must be accurately distributed to daughter cells—a process that is accomplished on the microtubule spindle. Kinesin-13 motors play an essential role in this process by performing regulated microtubule depolymerization. We set out to dissect the depolymerization mechanism of these kinesins, and in particular, the role of their conserved neck sequence. We used a monomeric kinesin-13 MCAK, consisting of the neck and motor core, which has strong depolymerizing activity. In the presence of a non-hydrolysable ATP analogue, this construct induced formation of rings around microtubules. The rings are built from tubulin protofilaments that are bent by the kinesin-13 motor engaged at the ATP-binding step of its ATPase cycle. Our data suggest that the ring-microtubule interaction is mediated by the neck and support the idea of a role for the kinesin-13 neck in depolymerization efficiency, acting by optimising release of tubulin from microtubule ends.     

One axon,many kinesins: What's the logic?

A large number of membrane-bounded organelles, protein complexes, and mRNAs are transported along microtubules to different locations within the neuronal axon. Axonal transport in the anterograde direction is carried out by members of a superfamily of specialized motor proteins, the kinesins. All kinesins contain a conserved motor domain that hydrolyses ATP to generate movement along microtubules. Regions outside the motor domain are responsible for cargo binding and regulation of motor activity. Present in a soluble, inactive form in the cytoplasm, kinesins are activated upon cargo binding. Selective targeting of different types of kinesin motors to specific cargoes is directed by amino acid sequences situated in their variable tails. Cargo proteins with specific function at their destination, bind directly to specific kinesins for transport. Whereas most kinesins move to microtubule plus-ends, a small number of them move to microtubule minus-ends, and may participate in retrograde axonal transport. Axonal transport by kinesins has a logic: Fully assembled, multisubunit, functional complexes (e.g., ion channel complexes, signaling complexes, RNA-protein complexes) are transported to their destination by kinesin motors that interact transiently (i.e., during transport only) with one of the complexes' subunits.     

Directed binding

We propose a novel physical mechanism to describe the mode of processive propagation of twoheaded kinesin motor proteins along microtubule (MT) filaments. Binding and unbinding of the kinesin heads to and from the MT filament play a crucial role in producing movement. The chemical energy of adenosine triphosphate hydrolysis is used in large part for the unbinding process of kinesin from the MT filament. Importantly, in our model, the binding of each head is to be directionally oriented to the MT filament. Therefore, we treat the two motor domains (heads) as extended objects that are connected with each other by a neck region that contains the kinesin dimerization domain. The head domains recognize tubulin binding sites by feeling the two-dimensional periodic potential from the MT surface and are also subjected to thermal noise. Using experimentally determined results regarding physical parameters of the walk, we develop a simple mathematical and mechanical model in which directed binding of the heads to tubulin results in a directed twist of the molecule, probably in the neck linker region, away from its relaxed state. Unbinding of the head from the filament relaxes the twist and defines the propagation direction. We showed that there must be at least two torsional springs (one for every head) involved that can store elastic energy. Consequently, in our model, it is the internal structure both of the relaxed and tensed-up state and the transition mode between them that define the walking direction of kinesin. We present calculations based on the model that are in good quantitative agreement with experimental observations for kinesin.     

Universal and unique features of kinesin motors: insights from a comparison of fungal and animal conventional kinesins.

Kinesins are microtubule motors that use the energy derived from the hydrolysis of ATP to move unidirectionally along microtubules. The founding member of this still growing superfamily is conventional kinesin, a dimeric motor that moves processively towards the plus end of microtubules. Within the family of conventional kinesins, two groups can be distinguished to date, one derived from animal species, and one originating from filamentous fungi. So far no conventional kinesin has been reported from plant cells. Fungal and animal conventional kinesins differ in several respects, both in terms of their primary sequence and their physiological properties. Thus all fungal conventional kinesins move at velocities that are 4-5 times higher than those of animal conventional kinesins, and all of them appear to lack associated light chains. Both groups of motors are characterized by a number of group-specific sequence features which are considered here with respect to their functional importance. Animal and fungal conventional kinesins also share a number of sequence characteristics which point to common principles of motor function. The overall domain organization is remarkably similar. A C-terminal sequence motif common to all kinesins, which constitutes the only region of high homology outside the motor domain, suggests common principles of cargo association in both groups of motors. Consideration of the differences of, and similarities between, fungal and animal kinesins offers novel possibilities for experimentation (e. g., by constructing chimeras) that can be expected to contribute to our understanding of motor function.     

The EB1 homolog Mal3 stimulates the ATPase of the kinesin Tea2 by recruiting it to the microtubule

Tea2 is a kinesin family member from Schizosaccharomyces pombe that is targeted to microtubule tips and cell ends in a process that depends on Mal3. Constructs of Tea2 containing the motor domain only or the motor domain plus the N-terminal extension are monomeric, whereas a construct including the first predicted coiled coil region is dimeric. These constructs have a low basal rate of ATP hydrolysis of <0.1 s(-1), but microtubules stimulate the rate of ATP hydrolysis to a maximum of approximately 15 s(-1). Hydrodynamic analysis of Mal3 indicates that it is dimeric. Mal3 is known to associate with Tea2, and analysis with the above Tea2 constructs indicates that the principal site of interaction of Mal3 with Tea2 is the N-terminal extension, although a weaker interaction is also observed with the motor domain alone. In parallel to the binding studies, Mal3 strongly stimulates the ATPase of constructs containing the N-terminal extension by decreasing the K0.5(MT) for stimulation by microtubules but only weakly stimulates motor domains without the N-terminal extension. Mal3 reduces the K0.5(MT) values without affecting the k(cat) value at saturating microtubule level. Binding of Mal3 to microtubules induces an increase in the binding of Tea2 and a reciprocal stimulation of Mal3 binding by Tea2 is also observed. Tea2 is a plus end directed motor that drives sliding of axonemes when adsorbed to a glass surface. The sliding rate is initially unaffected by Mal3, but axonemes stop moving on continued exposure to Mal3.     

Microscopic evidence for a minus-end-directed power stroke in the kinesin motor ncd

We used cryo-electron microscopy and image reconstruction to investigate the structure and microtubule-binding configurations of dimeric non-claret disjunctional (ncd) motor domains under various nucleotide conditions, and applied molecular docking using ncd's dimeric X-ray structure to generate a mechanistic model for force transduction. To visualize the alpha-helical coiled-coil neck better, we engineered an SH3 domain to the N-terminal end of our ncd construct (296-700). Ncd exhibits strikingly different nucleotide-dependent three-dimensional conformations and microtubule-binding patterns from those of conventional kinesin. In the absence of nucleotide, the neck adapts a configuration close to that found in the X-ray structure with stable interactions between the neck and motor core domain. Minus-end-directed movement is based mainly on two key events: (i) the stable neck-core interactions in ncd generate a binding geometry between motor and microtubule which places the motor ahead of its cargo in the minus-end direction; and (ii) after the uptake of ATP, the two heads rearrange their position relative to each other in a way that promotes a swing of the neck in the minus-end direction.     

Nucleotide-induced conformations in the neck region of dimeric kinesin

The neck region of kinesin constitutes a key component in the enzyme's walking mechanism. Here we applied cryoelectron microscopy and image reconstruction to investigate the location of the kinesin neck in dimeric and monomeric constructs complexed to microtubules. To this end we enhanced the visibility of this region by engineering an SH3 domain into the transition between neck linker and neck coiled coil. The resulting chimeric kinesin constructs remained functional as verified by physiology assays. In the presence of AMP-PNP the SH3 domains allowed us to identify the position of the neck in a well defined conformation and revealed its high flexibility in the absence of nucleotide. We show here the double-headed binding of dimeric kinesin along the same protofilament, which is characterized by the opposite directionality of neck linkers. In this configuration the neck coiled coil appears fully zipped. The position of the neck region in dimeric constructs is not affected by the presence of the tubulin C-termini as confirmed by subtilisin treatment of microtubules prior to motor decoration.     

The crystal structure of the minus-end-directed microtubule motor protein ncd reveals variable dimer conformations

BACKGROUND: The kinesin superfamily of microtubule-associated motor proteins are important for intracellular transport and for cell division in eukaryotes. Conventional kinesins have the motor domain at the N terminus of the heavy chain and move towards the plus end of microtubules. The ncd protein is necessary for chromosome segregation in meiosis. It belongs to a subfamily of kinesins that have the motor domain at the C terminus and move towards the minus end of microtubules. RESULTS: The crystal structure of dimeric ncd has been obtained at 2.9 A resolution from crystals with the C222(1) space group, with two independent dimers per asymmetric unit. The motor domains in these dimers are not related by crystallographic symmetry and the two ncd dimers have significantly different conformations. An alpha-helical coiled coil connects, and interacts with, the motor domains. CONCLUSIONS: The ncd protein has a very compact structure, largely due to extended interactions of the coiled coil with the head domains. Despite this, we find that the overall conformation of the ncd dimer can be rotated by as much as 10 degrees away from that of the twofold-symmetric archetypal ncd. The crystal structures of conventional kinesin and of ncd suggest a structural rationale for the reversal of the direction of movement in chimeric kinesins.     

Single fungal kinesin motor molecules move processively along microtubules

Conventional kinesins are two-headed molecular motors that move as single molecules micrometer-long distances on microtubules by using energy derived from ATP hydrolysis. The presence of two heads is a prerequisite for this processive motility, but other interacting domains, like the neck and K-loop, influence the processivity and are implicated in allowing some single-headed kinesins to move processively. Neurospora kinesin (NKin) is a phylogenetically distant, dimeric kinesin from Neurospora crassa with high gliding speed and an unusual neck domain. We quantified the processivity of NKin and compared it to human kinesin, HKin, using gliding and fluorescence-based processivity assays. Our data show that NKin is a processive motor. Single NKin molecules translocated microtubules in gliding assays on average 2.14 micro m (N = 46). When we tracked single, fluorescently labeled NKin motors, they moved on average 1.75 micro m (N = 182) before detaching from the microtubule, whereas HKin motors moved shorter distances (0.83 micro m, N = 229) under identical conditions. NKin is therefore at least twice as processive as HKin. These studies, together with biochemical work, provide a basis for experiments to dissect the molecular mechanisms of processive movement.