A life cycle assessment study of a Canadian post-combustion carbon dioxide capture process system

Purpose

While carbon dioxide capture and storage (CCS) has been widely recognized as a useful technology for mitigating greenhouse gas emissions, it is necessary to evaluate the environmental performance of CCS from a full life cycle perspective to comprehensively understand its environmental impacts. The primary research objective is to conduct a study on life cycle assessment of the post-combustion carbon dioxide capture process based on data from SaskPower’s electricity generation station at the Boundary Dam in Saskatchewan, Canada. A secondary objective of this study is to identify the life cycle impact assessment (LCIA) methodology which is most suitable for the assessment of carbon dioxide capture technology integrated with the power generation system in the Canadian context.

Methods

The study takes a comparative approach by including three scenarios of carbon dioxide capture at the electricity generation station: no carbon dioxide capture (“no capture”), partial capture (“retrofit”), and fully integrated carbon dioxide capture of the entire facility (“capture”). The four LCIA methods of EDIP 97, CML2001, IMPACT2002+, and TRACI are used to convert existing inventory data into environmental impacts. The LCIA results from the four methods are compared and interpreted based on midpoint categories.

Results and discussion

The LCA results showed an increase in the retrofit and capture scenarios compared to the no capture scenario in the impact categories of eutrophication air, ecotoxicity water, ecotoxicity ground surface soil, eutrophication water, human health cancer ground surface soil, human health cancer water, human health noncancer ground surface soil, ozone depletion air, human health noncancer water, and ionizing radiation. The reductions were observed in the retrofit and capture scenarios in the impact categories of acidification, human health criteria air-point source, human health noncancer air, ecotoxicity air, global warming, human health cancer air, and respiratory effects.

Conclusions

Although the four LCIA methodologies significantly differ in terms of reference substances used for individual impact categories, all (TRACI, IMPACT2002+, CML2001, and EDIP 97) showed similar results in all impact categories.     

The influence of contaminants in the environmental impact of recovered paper: a life cycle assessment perspective

Purpose

This study aims to analyze and quantify the environmental impacts associated with the production of testliner paper using 100?% recovered paper as fiber raw material, by applying the life cycle assessment principles. A simulation of advanced sorting technology was done to prepare and use batches of raw materials with different levels of contaminants. Comparative studies of environmental impact assessment were focused on the quality of recovered paper, which is decisively influenced by the efficiency of the sorting process. The particularity of the study is that so far it is the only one that analyzes the environmental impact generated by recovered paper quality.

Methods

To analyze the environmental impacts in the scenarios, life cycle assessment methodology was considered. Potential environmental impacts were assessed by using the CML 2009, Dec.07 method developed by the Centre for Environmental Science from the University of Leiden.

Results and discussion

In this study, acidification potential, abiotic resources depletion potential, eutrophication potential, global warming potential, photochemical ozone creation potential, and human toxicity potential were the impact categories analyzed. Considering that the system boundaries refer only to the paper mill that was obtained, all unitary processes involved in the manufacturing of product system influence in varying proportions the impact categories chosen for evaluation. A higher concentration of contaminants leads to a higher amount of energy and water used, and thus, a significant amount of waste and emissions generated. Simulations performed have highlighted the importance of sorting technology that influences the quality of raw material that will be used.

Conclusions

Utilization of recovered paper batches with a low quality contributes to an increased environmental impact associated with the testliner paper manufacturing stage. A low quality of recovered paper will influence energy consumption in different modules of the system (recycled fiber pulp preparation, paper machine, and wastewater treatment), the volume of waste generated, and consequently the emissions released both in air and water.     

Land use impact assessment in the construction sector: an analysis of LCIA models and case study application

Purpose

Land use is a potentially important impact category in life cycle assessment (LCA) studies of buildings. Three research questions are addressed in this paper: Is land use a decisive factor in the environmental impact of buildings?; Is it important to include the primary land use of buildings in the assessment?; and How does the environmental performance of solid structure and timber frame dwellings differ when assessed by distinct available models for quantifying land use impacts?

Methods

This paper compares several operational land use impact assessment models, which are subsequently implemented in an LCA case study comparing a building constructed using timber frame versus a solid structure. Different models were used for addressing the different research questions.

Results and discussion

The results reveal that contrasting decisions may be supported by LCA study results, depending on whether or not and how land use is included in the assessment. The analysis also highlights the need to include the building land footprint in the assessment and to better distinguish building locations in current land use impact assessment models.

Conclusions

Selecting land use assessment models that are most appropriate to the goals of the study is recommended as different models assess different environmental issues related to land use. In general, the combination of two land use assessment methods for buildings is recommended, i.e. soil organic matter (SOM) of Milà i Canals and Eco-indicator 99.     

Ecodesign of PVC packing tape using life cycle assessment

Purpose

Polymer materials play an important role in the improvement and quality of life. However, due to their persistence in the environment, polymer materials may be harmful to the ecosystems. According to the European Directive on Packaging and Packaging Waste, management of these wastes should include prevention of their generation as a priority. The main motivation for employing ecodesign of a product is to reduce both raw material consumption and waste generation through a good initial design.

Methods

In this study, life cycle assessment (LCA) was applied to the design of printed PVC plastic packing tape in order to reduce its environmental impact. LCA software GaBi4.4^® was used to determine the PVC packing tape life cycle stage with the highest environmental impacts.

Results and discussion

LCA results showed that PVC film manufacture was the stage with the highest impact. It was therefore reasonable to assume that packing tape manufactured with material other than PVC could have reduced environmental impact, and LCA was used to evaluate this hypothesis. When using Kraft paper or polypropylene plastic packing tape, the weighted impacts were reduced by 36.3 and 39.9 %, respectively.

Conclusions

PVC plastic packing tape has been redesigned with the aim of reducing waste and raw material consumption. LCA results showed that a suitable option for reducing life cycle environmental impact is to use alternative film materials. Kraft paper and polypropylene plastic packing tape were found to give lower values of almost all environmental impact indexes and normalized and weighted impacts.     

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose

Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win–win or trade-off situations will be identified via a life cycle assessment/life cycle costing (LCA/LCC) integrated model.

Methods

The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the life cycle inventory and the life cycle impact assessment.

Results and discussion

In both the SST and CST systems, the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win–win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its end-of-life stage.

Conclusions

The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Furthermore, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company or, in some cases, even in its procurement practices.     

Land use impacts on freshwater regulation, erosion regulation, and water purification: a spatial approach for a global scale level

Purpose

Rarely considered in environmental assessment methods, potential land use impacts on a series of ecosystem services must be accounted for in widely used decision-making tools such as life cycle assessment (LCA). The main goal of this study is to provide an operational life cycle impact assessment characterization method that addresses land use impacts at a global scale by developing spatially differentiated characterization factors (CFs) and assessing the extent of their spatial variability using different regionalization levels.

Methods

The proposed method follows the recommendations of previous work and falls within the framework and principles for land use impact assessment established by the United Nations Environment Programme/Society of Environmental Toxicology and Chemistry Life Cycle Initiative. Based on the spatial approach suggested by Saad et al. (Int J Life Cycle Assess 16: 198–211, 2011), the intended impact pathways that are modeled pertain to impacts on ecosystem services damage potential and focus on three major ecosystem services: (1) erosion regulation potential, (2) freshwater regulation potential, and (3) water purification potential. Spatially-differentiated CFs were calculated for each biogeographic region of all three regionalization scale (Holdridge life regions, Holdridge life zones, and terrestrial biomes) along with a nonspatial world average level. In addition, seven land use types were assessed considering both land occupation and land transformation interventions.

Results and discussion

A comprehensive analysis of the results indicates that, when compared to all resolution schemes, the world generic averaged CF can deviate for various ecosystem types. In the case of groundwater recharge potential impacts, this range varied up to factors of 7, 4.7, and 3 when using the Holdridge life zones, the Holdridge regions, and the terrestrial biomes regionalization levels, respectively. This validates the importance of introducing a regionalized assessment and highlights how a finer scale increases the level of detail and consequently the discriminating power across several biogeographic regions, which could not have been captured using a coarser scale. In practice, the implementation of such regionalized CFs suggests that an LCA practitioner must identify the ecosystem in which land occupation or transformation activities occur in addition to the traditional inventory data required—namely, the land use activity and the inventory flow.

Conclusions

The variability of CFs across all three regionalization levels provides an indication of the uncertainty linked to nonspatial CFs. Among other assumptions and value choices made throughout the study, the use of ecological borders over political boundaries was deemed more relevant to the interpretation of environmental issues related to specific functional ecosystem behaviors.     

Quantifying anthropogenic mobilization,flows (in product systems) and emissions of fixed nitrogen in process-based environmental life cycle assessment: rationale,methods and application to a life cycle inventory

Purpose

Anthropogenic perturbation of the nitrogen cycle is attracting increasing attention as both an environmental and societal concern. Here, we provide the rationale and propose methods for independent treatment of anthropogenic mobilization, flows (in product systems) and emissions of fixed nitrogen in process-based environmental life cycle assessment.

Methods

We propose a simple methodology for aggregating N flows in life cycle assessment (LCA), with supporting characterization factors for all nitrogen-containing compounds on the Organization for Economic Cooperation and Development High Production Volume Chemical List for which specific chemical formulae are available, as well as all nitrogen-containing flows in the International Reference Life Cycle Data System. We subsequently apply our method and characterization factors to a life cycle inventory data set representing a subset of the consumption attributable to an average EU-27 consumer and compare the results against previously published estimates for nitrogen emissions at the consumer level that were generated using alternative methods/approaches.

Results and discussion

We derive a suite of over 2,000 characterization factors for nitrogen-containing compounds. Overall, the results generated by applying our method and characterization factors to the European Commission Basket-of-Products life cycle inventory data set are consistent with those observed from studies having a similar scope but different methodological approach.

Conclusions

This outcome suggests that anthropogenic mobilization, flows (in product systems) and emissions of fixed nitrogen can, indeed, be systematically inventoried and aggregated in process-based LCA for the purpose of better understanding and managing anthropogenic impacts on the global nitrogen cycle using the methods and characterization factors we propose.     

Life cycle assessment of sponge nickel produced by gas atomisation for use in industrial hydrogenation catalysis applications

Purpose

This paper presents a cradle-to-grave comparative life cycle assessment (LCA) of new gas atomised (GA) sponge nickel catalysts and evaluates their performance against the current cast and crush standard currently used in the industrial hydrogenation of butyraldehyde to butanol.

Methods

A comparative LCA has been made, accounting for the energy used and emissions throughout the entire life cycle of sponge nickel catalysts—ranging from the upstream production of materials (mainly aluminium and nickel), to the manufacturing, to the operation and finally to the recycling and disposal. The LCA was performed following ISO14040 principles where possible, and subsequently implemented in the software package GaBi 4.3. The CML2001 impact assessment methodology was used, with primary focus on comparing catalysts for equivalent greenhouse gasses generated over their lifetime and their relative global warming potential and secondary focus on acidification potential. This is justified as the lifetime is dominated by energy use in the operational phase, and acidification is dominated by the production of nickel for which existing ISO14040 collected data has been used. A sensitivity analysis was used to provide a number of scenarios and overall environmental performances of the various sponge nickels considered when compared to the existing industrial standard.

Results and discussion

It was found that the energy and emissions during the operation phase associated with a given catalyst significantly outweigh the primary production, manufacturing and recycling. Primary production of the nickel (and to a lesser extent molybdenum when used as a dopant) also has a significant environmental impact in terms of acidification potential, but this is offset by operational energy savings over the catalysts’ estimated lifetime and end of life recyclability. Finally, the impact of activity improvement and lifetime duration of sponge nickel catalysts was determined as both total life cycle energy for operational use and as a total life cycle global warming potential.

Conclusions

From this assessment, the newly developed, higher activity spongy nickel catalysts produced by gas atomisation could have a significantly lower environmental impact than the current industry standard cast and crush method. Given the potential environmental benefits of such catalysts, applications in other processes that require a catalyst should also be investigated.     

Life cycle assessment of the Peruvian industrial anchoveta fleet: boundary setting in life cycle inventory analyses of complex and plural means of production

Purpose

This work has two major objectives: (1) to perform an attributional life cycle assessment (LCA) of a complex mean of production, the main Peruvian fishery targeting anchoveta (anchovy) and (2) to assess common assumptions regarding the exclusion of items from the life cycle inventory (LCI).

Methods

Data were compiled for 136 vessels of the 661 units in the fleet. The functional unit was 1 t of fresh fish delivered by a steel vessel. Our approach consisted of four steps: (1) a stratified sampling scheme based on a typology of the fleet, (2) a large and very detailed inventory on small representative samples with very limited exclusion based on conventional LCI approaches, (3) an impact assessment on this detailed LCI, followed by a boundary-refining process consisting of retention of items that contributed to the first 95 % of total impacts and (4) increasing the initial sample with a limited number of items, according to the results of (3). The life cycle impact assessment (LCIA) method mostly used was ReCiPe v1.07 associated to the ecoinvent database.

Results and discussion

Some items that are usually ignored in an LCI’s means of production have a significant impact. The use phase is the most important in terms of impacts (66 %), and within that phase, fuel consumption is the leading inventory item contributing to impacts (99 %). Provision of metals (with special attention to electric wiring which is often overlooked) during construction and maintenance, and of nylon for fishing nets, follows. The anchoveta fishery is shown to display the lowest fuel use intensity worldwide.

Conclusions

Boundary setting is crucial to avoid underestimation of environmental impacts of complex means of production. The construction, maintenance and EOL stages of the life cycle of fishing vessels have here a substantial environmental impact. Recommendations can be made to decrease the environmental impact of the fleet.     

Social life cycle assessment for material selection: a case study of building materials

Purpose

Sustainability of a material-based product mainly depends on the materials used for the product itself or during its lifetime. A material selection decision should not only capture the functional performance required but should also consider the economical, social, and environmental impacts originated during the product life cycle. There is a need to assess social impacts of materials along the full life cycle, not only to be able to address the “social dimension” in sustainable material selection but also for potentially improving the circumstances of affected stakeholders. This paper presents the method and a case study of social life cycle assessment (S-LCA) specialized for comparative studies. Although the authors’ focus is on material selection, the proposed methodology can be used for comparative assessment of products in general.

Methods

The method is based on UNEP/SETAC “guidelines for social life-cycle assessment of products” and includes four main phases: goal and scope definition, life cycle inventory analysis, life cycle impact assessment, and life cycle interpretation. However, some special features are presented to adjust the framework for materials comparison purpose. In life cycle inventory analysis phase, a hot spot assessment is carried out using material flow analysis and stakeholder and experts’ interviews. Based on the results of that, a pairwise comparison method is proposed for life cycle impact assessment applying analytic hierarchy process. A case study was conducted to perform a comparative assessment of the social and socio-economic impacts in life cycle of concrete and steel as building materials in Iran. For hot spot analysis, generic and national level data were gathered, and for impact assessment phase, site-specific data were used.

Result and discussion

The unique feature of the proposed method compared with other works in S-LCA is its specialty to materials and products comparison. This leads to some differences in methodological issues of S-LCA that are explained in the paper in detail. The case study results assert that “steel/iron” in the north of Iran generally has the better social performance than “concrete/cement.” However, steel is associated with many negative social effects in some subcategories, e.g., freedom of association, fair salary, and occupational health in extraction phase. Against, social profile of concrete and cement industry is damaged mainly due to the negative impact of cement production on safe and healthy living condition. The case study presented in this article shows that the evaluation of social impacts is possible, even if the assessment is always affected by subjective value systems.

Conclusions

Application of the UNEP/SETAC guidelines in comparative studies can be encouraged based on the results of this paper. It enables a hotspot assessment of the social and socio-economic impacts in life cycle of alternative materials. This research showed that the development of a specialized S-LCA approach for materials and products comparison is well underway although many challenges still persist. Particularly characterization method in life cycle impact assessment phase is challenging. The findings of this case study pointed out that social impacts are primarily connected to the conduct of companies and less with processes and materials in general. These findings confirm the results of Dreyer et al. (Int J Life Cycle Assess 11(2):88–97, 2006). The proposed approach aims not only to identify the best socially sustainable alternative but also to reveal product/process improvement potentials to facilitate companies to act socially compatible. It will be interesting to apply the UNEP/SETAC approach of S-LCA to other materials and products; materials with a more complex life cycle will be a special challenge. As with any new method, getting experience on data collection and evaluation, building a data base, integrating the method in software tools, and finding ways for effective communication of results are important steps until integrating S-LCA in routine decision support.     

Environmental impact trade-offs in building envelope retrofit strategies

Purpose

The use of high levels of thermal insulation is a common practice towards reducing the energy consumption of the existing building stock; however, the embodied burdens associated with the additional insulation material are usually not taken into account and questions regarding the risks of over-specifying the insulation levels have been emerging, particularly for mild climate regions. This article addresses the issue presenting an integrated approach that combines life cycle assessment and thermal dynamic simulation to assess alternative retrofit strategies for the roof and exterior walls of two dwellings (from the beginning of the twentieth century), in the historic city center of Coimbra, Portugal. A comprehensive analysis of alternative insulation thicknesses (no insulation, 40, 80, and 120 mm of expanded polystyrene) was made to identify optimal thickness levels minimizing life cycle (LC) environmental impacts for a single-family house and an apartment.

Methods

Embodied and operational impact trade-offs were calculated for six impact categories: climate change, ozone depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, and non-renewable primary energy. The operational energy was calculated using a dynamic thermal modeling software (EnergyPlus). The functional unit selected for this study was 1 m² of living area over a period of 50 years.

Results and discussion

The single-family house embodied impacts account for 26–57 % of total LC impacts. For insulation thicknesses larger than 80 mm, the embodied impacts are greater than operational impacts. For the apartment, embodied impacts account for 25–49 % of total LC impacts. The environmental benefits of additional insulation are very low (<3 %) for thicknesses of more than 80 mm for both roof and exterior walls. For thicknesses above the tipping point (where total LC impacts are minimized), the marginal impacts of additional insulation are higher than the benefits. The results for the apartment show that optimal insulation thicknesses (LC tipping point) range from 30 to 40 mm for the roof and from 60 to 80 mm for the exterior walls. The LC tipping point for the single-family house is achieved by combining 80–100 mm of roof insulation with 60–80 mm of exterior wall insulation.

Conclusions

Extra insulation levels in temperate climates can lead to higher embodied impacts, without significant reduction in operational impacts, which can result in higher total LC impacts. The results show that a tipping point can be identified, and recommendations are provided for the roof and exterior wall retrofits of buildings from the beginning of the twentieth century.

     

Life cycle assessment of desktop PCs in Macau

Purpose

With the tremendous growth in the worldwide electronic information and telecommunication industries, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electrical and electronic products (e-products). Although Macau is a small region with a total land area of about 29.5 km² and a population of 557,000 in 2011, there are two personal computers (PCs) for every household in Macau.

Methods

This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of PCs in Macau. An assessment of the PC (focusing on the desktop PC) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with both the Eco-indicator'99 method and the Centrum voor Milieuwetenschappen method. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations of the actual situations.

Results and discussion

The established LCA study showed that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing stage, the desktop contributes the most to the total environmental impacts (44.89 Pt), followed by the LCD screens (about 27.53 Pt), while the CRT screen, keyboard, and mouse are of minor importance. During the use phase, the environmental impact is due entirely to the consumption of electricity generated by coal, oil, natural gas, and hydropower. The electricity generated by coal is by far the most important, accounting for about 66 % of the total environmental impact, followed by oil and gas. Within the EoL treatment phase, using incineration, there will be little environmental impact. When adopting recycling technology in the EoL phase, apparent environmental benefits will be generated due mainly to avoiding emissions to water (arsenic ions and cadmium ions) and to air (SO₂) in the primary production phase. For the competing technologies of CRT and LCD screens, the environmental impacts are different in different phases, but the total impacts over their entire life cycle are similar.

Conclusions

Results from a life cycle assessment can be used to compare the relative environmental impacts of competing technologies; it can also help designers and managers to focus efforts toward making environmental improvements to a particular technology.     

Integrating triple bottom line input–output analysis into life cycle sustainability assessment framework: the case for US buildings

Purpose

With the increasing concerns related to integration of social and economic dimensions of the sustainability into life cycle assessment (LCA), traditional LCA approach has been transformed into a new concept, which is called as life cycle sustainability assessment (LCSA). This study aims to contribute the existing LCSA framework by integrating several social and economic indicators to demonstrate the usefulness of input–output modeling on quantifying sustainability impacts. Additionally, inclusion of all indirect supply chain-related impacts provides an economy-wide analysis and a macro-level LCSA. Current research also aims to identify and outline economic, social, and environmental impacts, termed as triple bottom line (TBL), of the US residential and commercial buildings encompassing building construction, operation, and disposal phases.

Methods

To achieve this goal, TBL economic input–output based hybrid LCA model is utilized for assessing building sustainability of the US residential and commercial buildings. Residential buildings include single and multi-family structures, while medical buildings, hospitals, special care buildings, office buildings, including financial buildings, multi-merchandise shopping, beverage and food establishments, warehouses, and other commercial structures are classified as commercial buildings according to the US Department of Commerce. In this analysis, 16 macro-level sustainability assessment indicators were chosen and divided into three main categories, namely environmental, social, and economic indicators.

Results and discussion

Analysis results revealed that construction phase, electricity use, and commuting played a crucial role in much of the sustainability impact categories. The electricity use was the most dominant component of the environmental impacts with more than 50 % of greenhouse gas emissions and energy consumption through all life cycle stages of the US buildings. In addition, construction phase has the largest share in income category with 60 % of the total income generated through residential building’s life cycle. Residential buildings have higher shares in all of the sustainability impact categories due to their relatively higher economic activity and different supply chain characteristics.

Conclusions

This paper is an important attempt toward integrating the TBL perspective into LCSA framework. Policymakers can benefit from such approach and quantify macro-level environmental, economic, and social impacts of their policy implications simultaneously. Another important outcome of this study is that focusing only environmental impacts may misguide decision-makers and compromise social and economic benefits while trying to reduce environmental impacts. Hence, instead of focusing on environmental impacts only, this study filled the gap about analyzing sustainability impacts of buildings from a holistic perspective.     

Dynamic life cycle assessment: framework and application to an institutional building

Purpose

This paper uses a dynamic life cycle assessment (DLCA) approach and illustrates the potential importance of the method using a simplified case study of an institutional building. Previous life cycle assessment (LCA) studies have consistently found that energy consumption in the use phase of a building is dominant in most environmental impact categories. Due to the long life span of buildings and potential for changes in usage patterns over time, a shift toward DLCA has been suggested.

Methods

We define DLCA as an approach to LCA which explicitly incorporates dynamic process modeling in the context of temporal and spatial variations in the surrounding industrial and environmental systems. A simplified mathematical model is used to incorporate dynamic information from the case study building, temporally explicit sources of life cycle inventory data and temporally explicit life cycle impact assessment characterization factors, where available. The DLCA model was evaluated for the historical and projected future environmental impacts of an existing institutional building, with additional scenario development for sensitivity and uncertainty analysis of future impacts.

Results and discussion

Results showed that overall life cycle impacts varied greatly in some categories when compared to static LCA results, generated from the temporal perspective of either the building's initial construction or its recent renovation. From the initial construction perspective, impacts in categories related to criteria air pollutants were reduced by more than 50 % when compared to a static LCA, even though nonrenewable energy use increased by 15 %. Pollution controls were a major reason for these reductions. In the future scenario analysis, the baseline DLCA scenario showed a decrease in all impact categories compared with the static LCA. The outer bounds of the sensitivity analysis varied from slightly higher to strongly lower than the static results, indicating the general robustness of the decline across the scenarios.

Conclusions

These findings support the use of dynamic modeling in life cycle assessment to increase the relevance of results. In some cases, decision making related to building design and operations may be affected by considering the interaction of temporally explicit information in multiple steps of the LCA. The DLCA results suggest that in some cases, changes during a building's lifetime can influence the LCA results to a greater degree than the material and construction phases. Adapting LCA to a more dynamic approach may increase the usefulness of the method in assessing the performance of buildings and other complex systems in the built environment.     

Life cycle assessment of fuel ethanol from cane molasses in Thailand

Background, aim and scope

After China and India, Thailand is considered another emerging market for fuel ethanol in Asia. At present, ethanol in the country is mainly a fermentation/distillery product of cane molasses, although cassava and cane juice are considered other potential raw materials for the fuel. This study aims to evaluate the environmental impacts of substituting conventional gasoline (CG) with molasses-based gasohol in Thailand.

Materials and methods

The life cycle assessment (LCA) procedure carried out follows three interrelated phases: inventory analysis, characterization and interpretation. The functional unit for the comparison is 1 l gasoline equivalent consumed by a new passenger car to travel a specific distance.

Results

The results of the study show that molasses-based ethanol (MoE) in the form of 10% blend with gasoline (E10), along its whole life cycle, consumes less fossil energy (5.3%), less petroleum (8.1%) and provides a similar impact on acidification compared to CG. The fuel, however, has inferior performance in other categories (e.g. global warming potential, nutrient enrichment and photochemical ozone creation potential) indicated by increased impacts over CG.

Discussion

In most cases, higher impacts from the upstream of molasses-based ethanol tend to govern its net life cycle impacts relative to CG. This makes the fuel blend less environmentally friendly than CG for the specific conditions considered. However, as discussed later, this situation can be improved by appropriate changes in energy carriers.

Conclusions

The LCA procedure helps identify the key areas in the MoE production cycle where changes are required to improve environmental performance. Specifically, they are: (1) use of coal as energy source for ethanol conversion, (2) discharge of distillery spent wash into an anaerobic pond, and (3) open burning of cane trash in sugar cane production.

Recommendations and perspectives

Measures to improve the overall life cycle energy and environmental impacts of MoE are: (1) substituting biomass for fossil fuels in ethanol conversion, (2) capturing CH₄ from distillery spent wash and using it as an energy supply, and (3) utilizing cane trash for energy instead of open burning in fields.     

Life cycle assessment of commodity chemical production from forest residue via fast pyrolysis

Purpose

This life cycle assessment evaluates and quantifies the environmental impacts of renewable chemical production from forest residue via fast pyrolysis with hydrotreating/fluidized catalytic cracking (FCC) pathway.

Methods

The assessment input data are taken from Aspen Plus and greenhouse gases, regulated emissions, and energy use in transportation (GREET) model. The SimaPro 7.3 software is employed to evaluate the environmental impacts.

Results and discussion

The results indicate that the net fossil energy input is 34.8 MJ to produce 1 kg of chemicals, and the net global warming potential (GWP) is ?0.53 kg CO₂ eq. per kg chemicals produced under the proposed chemical production pathway. Sensitivity analysis indicates that bio-oil yields and chemical yields play the most important roles in the greenhouse gas footprints.

Conclusions

Fossil energy consumption and greenhouse gas (GHG) emissions can be reduced if commodity chemicals are produced via forest residue fast pyrolysis with hydrotreating/FCC pathway in place of conventional petroleum-based production pathways.     

The assessment of the relevance of building components and life phases for the environmental profile of nearly zero-energy buildings: life cycle assessment of a multifamily building in Italy

Purpose

Since the construction sector is a considerable energy consumer and greenhouse gas (GHG) producer, the EU rules strive to build nearly zero-energy buildings, by reducing the operative energy and yearning for on-site energy production. This article underlines the necessity to go beyond the energy evaluations and move towards the environmental assessment in a life cycle perspective, by comparing the impacts due to building materials and energy production devices.

Methods

We compared the operational energy impacts and those of technologies and materials carrying out a life cycle assessment (LCA; ISO 14040, ISO 14044, EN 15643–2, EN 15978) on a nearly zero-energy building (ZEB), a residential complex with 61 apartments in four buildings, situated near Milan (Italy). We consider all life cycle phases, including production, transport, building site activities, use and maintenance; the materials inventory was filled out collecting data from invoices paid, building site reports, construction drawings and product data sheets. To make the assessment results comparable, we set a functional unit of 1 m² of net floor area in 1 year (1 m²y), upon a lifespan of 100 years. The environmental data were acquired from Ecoinvent 2.2.

Results and discussion

The results highlight the important role of the pre-use and maintenance phases in building life so that in a nearly ZEB, the environmental impacts linked to the use are no longer the major proportion: the pre-use phase accounts for 56 %, while the operative energy is only 31 % of the total. For this reason, if the environmental assessment of the case study was shrunk to the operational consumption, only one third of the impacts would be considered. The consumption of non-renewable resources after 100 years are 193,950 GJ (133.5 kWh/m²y); the GHG emissions are 15,300 t (37.8 kg of CO₂?eq/m²y). In the pre-use phase, structures have the major impacts (50 %) and the load of system components is unexpectedly high (12 %) due to the ambition of on-site energy production.

Conclusions

Paying attention to the operative energy consumption seems to address to only one third of the environmental impacts of buildings: the adoption of LCA as a tool to guide the design choices could help to identify the solution which ensures the lowest overall impact on the whole life, balancing the options of reducing the energy requirements, the on-site production from renewable sources and the limitation of the impacts due to building components (simpler and more durable).

     

Life cycle assessment of light-emitting diode downlight luminaire—a case study

Purpose

Light-emitting diode (LED) technology is increasingly being used for general lighting. Thus, it is timely to study the environmental impacts of LED products. No life cycle assessments (LCA) of recessed LED downlight luminaires exist in the literature, and only a few assessments of any type of LED light source (component, lamp and luminaire) are available.

Methods

The LCA of a recessed LED downlight luminaire was conducted by using the data from the luminaire manufacturer, laboratory measurements, industry experts and literature. The assessment was conducted using SimaPro LCA software. EcoInvent and European Reference Life Cycle Database were used as the databases. The LCA included a range of environmental impacts in order to obtain a broad overview. The functional unit of the LCA was one luminaire used for 50,000 h. In addition, the sensitivity of the environmental impacts to the life was studied by assessing the LED downlight luminaire of 36,000 h and 15,000 h useful life and to the used energy sources by calculating the environmental impacts using two average energy mixes: French and European.

Results and discussion

The environmental impacts of the LED luminaire were mostly dominated by the energy consumption of the use. However, manufacturing caused approximately 23 % of the environmental impacts, on average. The environmental impacts of manufacturing were mainly due to the driver, LED array and aluminium parts. The installation, transport and end of life had nearly no effect on the total life cycle impacts, except for the end of life in hazardous waste. The life cycle environmental impacts were found to be sensitive to the life of the luminaire. The change from the French to the European average energy mix in use resulted to an even clearer dominance of the use stage.

Conclusions

The case study showed that the environmental impacts of the LED downlight luminaire were dominated by the use-stage energy consumption, especially in the case of the European energy mix in use. Luminous efficacy is, thus, a relatively appropriate environmental indicator of the luminaire. As LED technology possesses generally higher luminous efficacy compared to conventional ones, the LED luminaire is considered to represent an environmentally friendly lighting technology. However, data gaps exist in the data in LED product manufacturing and its environmental impacts. The environmental impacts of different LED products need to be analysed in order to be able to precisely compare the LED technology to the conventional lighting technologies.     

LCA for assessing environmental benefit of eco-design strategies and forest wood short supply chain: a furniture case study

Purpose

Eco-innovation strategies are increasingly adopted to ensure the minimization of environmental impacts. Nonetheless, only a comprehensive integrated assessment along the life cycle stages of a product may ensure a robust analysis of the benefit of the innovation. The object of the present study is the environmental assessment of furniture prototypes produced using certified wood and integrating eco-design criteria in their conception. The aim of the study was twofold: firstly, to evaluate the environmental profile of the furniture, highlighting possible hot spots of impacts, and secondly, to evaluate the capability of life cycle assessment (LCA) to identify the environmental benefit associated to the adoption of eco-innovation strategies, such as the following: ensuring short supply chain from raw material to production; using wood coming from certified forests (according to PEFC scheme); and the implementation of eco-design principles, also associated with green public procurement requirements.

Methods

LCA has been applied in a case study related to the wood furniture sector in the alpine region of Northern Italy. Every activity was modeled using primary data, related to the inputs and outputs of the processes, provided directly by the designers and by woodworking firms. Input data related to forestry activities and wood extraction were collected and processed in a previous phase of the study. The life cycle of a prototype school desk from the cradle-to-gate perspective was analyzed. A woodworking plant was examined in detail, dividing the whole manufacturing process into four phases: panels production, woodworking, painting and steel parts processing. The system boundaries included all the activities which take place inside the plant as well as energy inputs, transports and ancillary products used.

Results and discussion

The results highlighted that the working phases showing the greatest environmental burdens were the production of solid wood panels and the processing of iron parts. No concerns about chemicals, glues and paints were raised, due to the eco-design principles implemented in the production of the furniture. The choice of a short supply chain allowed for drastic reductions in the impacts associated to long-distance transports. Three sensitivity analyses were carried out to test the robustness of results concerning the following: (1) glue options, (2) drying phase and VOC emissions, and (3) transport options.

Conclusions

This study proves to which extent eco-design criteria implemented in practice improve the environmental performance of products. All positive effects due to decisions taken in school desk design and conception were supported by evidence.