Facile synthesis of multiamino vinyl poly(amino acid)s for promising bioapplications

We presented a general and facile strategy to prepare biocompatible multiamino polymers. Series of new monomers were synthesized by esterification of 2-hydroxyethyl methacrylate (HEMA) and Boc-amino acids, such as Boc-l-phenylalanine, Boc-glycine, Boc-l-alanine, Boc-l-valine, and Boc-l-lysine. Subsequent vinyl polymerization of monomers gave rise to vinyl poly(amino acid)s with a side primary amino group at each unit if deprotected. Both atom transfer radical polymerization (ATRP) and conventional free radical polymerization (FRP) were employed to prepare the multiamino polymers. A well controlled effect upon molecular weight with the standard first-order kinetics was achieved in cases of ATRP, and high molecular weight polymers were obtained via FRP. MTT assay showed that cell survival rates for the multiamino polymers were almost maintained above 90% and that their cytotoxicities were much lower than that of linear PEI (PEI 25000). Zeta potential measurements demonstrated that the vinyl poly(amino acid)s are electropositive, and AFM measurements showed that the vinyl poly(amino acid)s could tightly condense DNA into granular structures at a suitable concentration. The combination of facile availability, controlled productivity, low cytotoxicity and strong binding ability with DNA promises the great potential of the novel multiamino polymers in bioapplications.     

How the extra methylene group affects the ligation properties of Glu vs. Asp and Gln vs. Asn amino acids: a DFT/PCM study

The p-xylylene monomers of parylene N, C and D have similar high polymerization reactivity. For effective copolymerization processes this fact is basically a drawback and for instance the copolymerization with styrene doesn’t go at all (Corley et al. J Pol Sc 13(68):137–156, [15]). Substitution of terminal hydrogen atoms by chlorine atoms reduces reactivity dramatically. 7,7,8,8-tetrachloro-p-xylylene and 2,5,7,7,8,8-hexachloro-p-xylylene can be isolated as yellow crystals. These crystals can be kept without any change in temperature below 0 ^∘C, but they polymerize slowly at room temperature. Perchloro-p-xylylene is stable even at elevated temperatures and does not polymerize under any conditions. Both 7,7,8,8-tetrachloro-p-xylylene and 2,5,7,7,8,8-hexachloro-p-xylylene copolymerize with various vinyl monomers, such as styrene and others. In this work the polymerization reactions of different chloro-derivatives of p-xylylene were modeled by means of the DFT method with hybrid correlation functionals (B3LYP and PBE0) and, for comparison, by means of the Hartree Fock methods. We inquired both initiation as well as elongation polymeric reactions for each of the reactants. We survied their reactivity analytically examining energetics and configurations in Szwarc-like process. The quantitative influence of chlorine atoms on the reactivity in polymerization steps, their location in the reactants’ structure (aromatic and/or aliphatic) as well as their number, were reviewed. The polymerizations of p-xylylenes with chlorine atoms as terminal aliphatic substituents yet revealed one more access path for parylenes’ in situ functionalization.

     

Researches on chemically modified electrode. XIX. preparation of iron protoporphyrin film electrode by electrochemical polymerization and its catalysis

Using cyclic voltammetry the electrochemical polymerization of protoporphyrin (PP) and iron protoporphyrin (FePP) was investigated as radical cationic vinyl polymerization. A number of factors, such as electrode potential, temperature, and concentration of monomers in solution, may affect the rate of polymerization. The polymerized porphyrin film on electrode surface was analyzed with electronic scanning microscope, UV-visible spectroscope, and ESCA. The electrochemically polymerized FePP film glassy carbon electrode (poly(FePP)/GC) exhibits very high catalytic activity for dioxygen reduction in aqueous solution to water as a four-electron irreversible process.     

The effect of three triterpene acids and sporidesmin on the enzyme activities of rat liver plasma membranes.

Vinyl chloride and vinyl benzene (styrene) are mutagenic in microbial tests, in Drosophila, in yeast, and in mammalian cells. Reports from various countries have shown an excess of chromosomal aberrations in the lymphocytes of workers exposed to vinyl chloride monomer when the workers were compared with controls. Workers occupationally exposed to styrene also revealed a clear increase in the rate of chromosome aberrations in their lymphocytes. Both chloroethylene oxide and styrene oxide, the primary biotransformation products of vinyl chloirde and styrene respectively, bind covalently to cellular macromolecules. Vinyl chloride is a carcinogen in both animals and man. Styrene is currently being tested in animals. These findings, the demonstration of mutagenic response via microbial and other test systems and with observations of significant excesses of chromosomal aberrations among workers exposed to these agents, raise scientific and health oriented concern about the possible genetic risks of vinyl chloride and styrene to man.     

Grafting onto wool: 9. Alpha and beta forms in keratin-polymer system

Various vinyl monomers, methyl methacrylate, methyl acrylate, ethyl acrylate, butyl acrylate, styrene, acrylonitrile, 4-vinyl pyridine, and 2-hydroxyethyl methacrylate were graft-copolymerized onto Lincoln wool fibres. The - and β-X-ray intensities diffracted from the native and the grafted fibres were analysed quantitatively. by grafting with hydrophobic monomers, the amount of the -crystallites falls to about one-half of the initial value, but the decrease in -content is considerably less with hydrophilic monomers. On the other hand, in the grafted wool containing the latter monomers, the production of the β-materials is more less constrained throughout the fibre extension. Results show that the production of the β-materials does not directly correlate with the content of the -materials remaining in the grafted fibres, and that little possibility exists for the production of the β-cystals from the partly disrupted chains of the -crystallites resulting from the deposition of polymer.     

Styrene-spaced copolymers including anthraquinone and β-O-4 lignin model units: synthesis, characterization and reactivity under alkaline pulping conditions

A series of random copoly(styrene)s has been synthesized via radical polymerization of functionalized anthraquinone (AQ) and β-O-4 lignin model monomers. The copolymers were designed to have a different number of styrene spacer groups between the AQ and β-O-4 lignin side chains aiming at investigating the distance effects on AQ/β-O-4 electron transfer mechanisms. A detailed molecular characterization, including techniques such as size exclusion chromatography, MALDI-TOF mass spectrometry, and (1)H, (13)C, (31)P NMR and UV-vis spectroscopies, afforded quantitative information about the composition of the copolymers as well as the average distribution of the AQ and β-O-4 groups in the macromolecular structures. TGA and DSC thermal analysis have indicated that the copolymers were thermally stable under regular pulping conditions, revealing the inertness of the styrene polymer backbone in the investigation of electron transfer mechanisms. Alkaline pulping experiments showed that close contact between the redox active side chains in the copolymers was fundamental for an efficient degradation of the β-O-4 lignin model units, highlighting the importance of electron transfer reactions in the lignin degradation mechanisms catalyzed by AQ. In the absence of glucose, AQ units oxidized phenolic β-O-4 lignin model parts, mainly by electron transfer leading to vanillin as major product. By contrast, in presence of glucose, anthrahydroquinone units (formed by reduction of AQ) reduced the quinone-methide units (issued by dehydration of phenolic β-O-4 lignin model part) mainly by electron transfer leading to guaiacol as major product. Both processes were distance dependent.     

Induction of chromosome aberrations by styrene and vinylacetate in cultured human lymphocytes: dependence on erythrocytes

Two vinyl monomers, styrene and vinylacetate, were tested for their ability to induce chromosome aberrations in cultured human lymphocytes. The effects of a 24-h treatment (48 h after culture initiation) were studied both in whole-blood cultures (with 2 X 10(8) erythrocytes/ml) and in isolated lymphocytes (with 4000 erythrocytes/ml). Styrene produced a clear dose-dependent increase in chromatid-type aberrations in whole-blood cultures (0.5-6 mM) and a weaker effect in cultures of isolated lymphocytes (1-4 mM). A statistically significant elevation in aberrations was observed at 2 mM in the former culture type and at 1 mM in the latter. These results support earlier studies on the importance of erythrocytes in the metabolic activation of styrene, but also suggest that a part of this activation occurs in the lymphocytes themselves. Vinylacetate (0.125-2 mM), the more potent clastogen of the two monomers tested, induced a distinct dose-dependent increase in chromatid-type aberrations and a slight elevation in chromosome-type breaks in both culture types. The lowest concentration giving a positive result was 0.25 mM. The clastogenic effects of vinylacetate were somewhat more pronounced in isolated lymphocytes than in whole blood. Vinylacetate is known to be rapidly hydrolyzed in vitro to acetaldehyde, which probably explains the positive result.     

Polymerization of IgA and IgM: roles of Cys309/Cys414 and the secretory tailpiece

We have investigated how the secretory tailpiece (tp), Cys414 and the amino acids flanking Cys414 or Cys309 are involved in regulating the different polymerization of IgM and IgA to pentamers and dimers/monomers, respectively. Whereas changing the tp of IgM to that of IgA has little effect on IgM polymerization, introducing the mu tp to IgA leads to the formation of larger than wild-type IgA polymers, including pentamers and hexamer. This shows that the secretory tp can differentially regulate polymerization depending on the heavy chain context. Cys414, which is engaged in intermonomeric disulfide bonds in IgM, is not crucial for the difference in IgM and IgA polymerization; IgM with a C414S mutation forms more large polymers than IgA. Also, IgA with IgM-like mutations in the five amino acids flanking Cys309, which is homologous to Cys414, oligomerize similarly as IgA wild type. Thus, IgA appears to have an inherent tendency to form monomers and dimers that is partially regulated by the tp, while the Cys309 region has only a minor effect. We also show that complement activation by IgM is sensitive to alterations in the polymeric structure, while IgA is inactive in classical complement activation even for polymers such as pentamers and hexamers.     

Polymers derived from hemicellulosic parts of lignocellulosic biomass

Furfural, which is directly derived from the hemicellulosic parts of lignocellulosic biomass, is considered as one of the most promising platform chemicals to manufacture commodity chemical products such as polymers and their monomers. Its production has already been commercialized. In this review, potentially relevant methods for producing important chemicals from furfural, which are used as monomers for different polymers, and for the polymerization of furfural and its derivatives (e.g., furfuryl alcohol), have been discussed. First, the production of furfural from different lignocellulosic biomasses is presented. Next, the synthesis of various monomers and their highest available yields from furfural are discussed. The polymers that can be directly produced from furfural and its derivatives are explored. Finally, the challenges of producing furfural-based products have been highlighted.

     

Genetic characterization of accumulation of polyhydroxyalkanoate from styrene in Pseudomonas putida CA-3

Pseudomonas putida CA-3 is capable of accumulating medium-chain-length polyhydroxyalkanoates (MCL-PHAs) when growing on the toxic pollutant styrene as the sole source of carbon and energy. In this study, we report on the molecular characterization of the metabolic pathways involved in this novel bioconversion. With a mini-Tn5 random mutagenesis approach, acetyl-coenzyme A (CoA) was identified as the end product of styrene metabolism in P. putida CA-3. Amplified flanking-region PCR was used to clone functionally expressed phenylacetyl-CoA catabolon genes upstream from the sty operon in P. putida CA-3, previously reported to generate acetyl-CoA moieties from the styrene catabolic intermediate, phenylacetyl-CoA. However, the essential involvement of a (non-phenylacetyl-CoA) catabolon-encoded 3-hydroxyacyl-CoA dehydrogenase is also reported. The link between de novo fatty acid synthesis and PHA monomer accumulation was investigated, and a functionally expressed 3-hydroxyacyl-acyl carrier protein-CoA transacylase (phaG) gene in P. putida CA-3 was identified. The deduced PhaG amino acid sequence shared >99% identity with a transacylase from P. putida KT2440, involved in 3-hydroxyacyl-CoA MCL-PHA monomer sequestration from de novo fatty acid synthesis under inorganic nutrient-limited conditions. Similarly, with P. putida CA-3, maximal phaG expression was observed only under nitrogen limitation, with concomitant PHA accumulation. Thus, beta-oxidation and fatty acid de novo synthesis appear to converge in the generation of MCL-PHA monomers from styrene in P. putida CA-3. Cloning and functional characterization of the pha locus, responsible for PHA polymerization/depolymerization is also reported and the significance and future prospects of this novel bioconversion are discussed.     

Lipase/esterase-catalyzed ring-opening polymerization: A green polyester synthesis technique

In the last decade, there has been increased interest in lipase/esterase-catalyzed ring-opening polymerization as an alternative to metal-based catalytic processes. This review focuses on three components in the reaction system, namely biocatalysts, reaction medium and monomers. Novel lipases or esterases are described with particular emphasis on, those derived from thermophiles, immobilized enzymes and recombinant whole-cell biocatalysts. Green solvents in enzymatic ring-opening polymerization, including water, ionic liquids, supercritical carbon dioxide and hydrofluorocarbon solvents, are also discussed. Enzymatic ring-opening polymerization is reviewed with regard to the variety of polymers obtainable, such as polyesters, polycarbonates, polyphosphates and polythioesters. Among these, enzymatic synthesis of polyesters has been most widely investigated, and is discussed for lactones with small to large ring sizes. Finally, the mechanism of enzymatic ring-opening polymerization is described, which is generally accepted as a monomer-activated mechanism. Overall, the review demonstrates that lipase/esterase-catalyzed synthesis of polymers via ring-opening polymerization provides an effective platform for conducting “green polymer chemistry”.     

Cell motility: proline-rich proteins promote protrusions

Many proline-rich proteins participate in delivering actin monomers to specific cellular locations where actin-rich membrane protrusions, such as ruffles, filopodia and microspikes, are formed. These protrusions are necessary for cell motility. Actin monomer is usually delivered to the site of polymerization in the form of profilactin - a complex of G-actin with a polyproline-binding protein, profilin. Here, we describe proline-rich proteins involved in regulating actin polymerization and classify them according to their role in recruiting profilin to the membrane.     

Properties of thermolysin immobilized in polymer matrix by radiation polymerization

Thermolysin (Bacillus thermoproteolyticus neutral proteinase, EC 3.4.24.4) has been immobilized by radiation polymerization of hydrophilic and hydrophobic monomers, and its properties, such as enzyme activity, thermal stability and durability, have been studied. The activity of the immobilized enzymes increased with an increase in the hydrophilicity of the polymer matrix and with a decrease in monomer concentration. Immobilization with hydrophilic monomers increased the thermal stability of the enzymes, but the thermal stability of the enzymes immobilized with hydrophobic monomers was comparable with that of native enzymes. The durability of the immobilized enzymes was examined by continuous hydrolysis of casein; enzymes immobilized with a high concentration (90%) of hydrophilic monomers appeared to be stabilized and could be used for long times.     

A computational approach to the polymerizabilities of diallylamines

Some selected diallylamine monomers have been studied with the semiempirical PM3 method as model compounds for N,N-dialkyl-N-2-(alkoxycarbonyl)allylammonium salts, in order to build up a quantitative and qualitative relationship between the experimental cyclopolymerizabilities of the monomers and calculated parameters such as charge, energy, geometrical features, bond orders, local softness values and HOMO-LUMO gaps. The charges on nitrogen, vinyl and allyl carbons, the activation barriers, the local softness values and the HOMO-LUMO gaps are found to represent the polymerizability trend of the monomers in general. Three-dimensional structures have been proposed for the reactants and their transition states by geometry optimizations with PM3.     

Radical graft functional modification of cellulose with allyl monomers: Chemistry and structure characterization

Cotton cellulose was successfully functionalized via a free radical graft polymerization process. Potassium persulfate served as an effective water soluble radical initiator to generate cellulosic radicals. The polymeric radicals could react with allyl monomers such as allyl-dimethylhydantion (ADMH) to form surface grafted cellulose. The reaction sites generated by potassium persulfate were probably at carbon 3 and 4 in glucose ring via oxidative hydrogen abstraction. The cellulosic radicals can initiate grafting polymerization of ADMH with a maximum polymerization degree of about 12 based on LC–MS results. The radical graft polymerization mechanisms were proposed based on LC–ESI/MS analysis. The ideal covalent bonding between cellulose and poly (allyl-dimethylhydantion) (PADMH) ensured permanent graft of the monomers on cotton and durability of the expected functions on the treated cotton.     

Preparation,purification and properties of a crosslinked trimer of G-actin

Phenylenebismaleimide has been used to form crosslinks between actin monomers [Knight, P. and Offer, G. (1978) Biochem. J. $\text{175}$, 1023–1032]. We have purified a trimer of actin monomers as well as a dimer and a mixture of higher molecular weight oligomers. The trimer is much more effective than the dimer in enhancing the rate of polymerization while higher oligomers do not appear to be any more effective than the trimer. A lag in the polymerization process, as measured fluorescence enhancement of trace pyrene-actin, still occurs in the presence of trimers serving as the nuclei, suggesting that the mechanism for polymerization is more complex than nucleation followed by elongation.     

Production of lignin peroxidase by Phanerochaete chrysosporium immobilized on porous poly(styrene-divinylbenzene) carrier and its application to the degrading of 2-chlorophenol

Porous poly(styrene-divinylbenzene) carriers, for the immobilization of white rot fungus Phanerochaete chrysosporium have been prepared by the concentrated emulsion polymerization method. The concentrated emulsion consists of a mixture of styrene and divinylbenzene containing a suitable surfactant and an initiator as the continuous phase, and water as the dispersed phase. The polymerization of the monomers of the continuous phase generated the polymer carrier with a porcus structure. The white rot fungus Phanerochaete chrysosporium has been immobilized on porous poly(styrene-divinylbenzene) carriers and used for the batch production and the repeated batch production of lignin peroxidase in shake cultures based on a carbon-limited medium containing veratryl alcohol. The best results were achieved when a spore inoculum was used for immobilization instead of 1-day-old mycelial pellets, for both the batch production and the repeated batch production. The porous poly(styrene-divinylbenzene) immobilized Phanerochaete chrysosporium and freely suspended mycelial pellets were used as biocatalysts for the degradation of 2-chilorophenol in a 2-L bioreactor. The porous poly(styrene-divinylbenzene) particle (diameter congruent with 0.2 cm) immobilized spores exhibited a much higher activity in the degradation of 2-chlorophenol than the freely suspended mycelial pellets. (c) 1994 John Wiley & Sons, Inc.     

Guardians of the actin monomer

Actin is a universal force provider in eukaryotic cells. Biological processes harness the pressure generated from actin polymerization through dictating the time, place and direction of filament growth. As such, polymerization is initiated and maintained via tightly controlled filament nucleation and elongation machineries. Biological systems integrate force into their activities through recruiting and activating these machineries. In order that actin function as a common force generating polymerization motor, cells must maintain a pool of active, polymerization-ready monomeric actin, and minimize extemporaneous polymerization. Maintenance of the active monomeric actin pool requires the recycling of actin filaments, through depolymerization, nucleotide exchange and reloading of the polymerization machineries, while the levels of monomers are constantly monitored and supplemented, when needed, via the access of a reserve pool of monomers and through gene expression. Throughout its monomeric life, actin needs to be protected against gratuitous nucleation events. Here, we review the proteins that act as custodians of monomeric actin. We estimate their levels on a tissue scale, and calculate the implied concentrations of each actin complex based on reported binding affinities. These estimations predict that monomeric actin is rarely, if ever, alone. Thus, the guardians keep the volatility of actin in check, so that its explosive power is only released in the controlled environments of the nucleation and polymerization machineries.     

Styrene metabolism in Exophiala jeanselmei and involvement of a cytochrome P-450-dependent styrene monooxygenase.

The yeast-like fungus Exophiala jeanselmei degrades styrene via initial oxidation of the vinyl side chain to phenylacetic acid, which is subsequently hydroxylated to homogentisic acid. The initial reactions are catalyzed by a NADPH- and flavin adenine dinucleotide-dependent styrene monooxygenase, a styrene oxide isomerase, and a NAD(+)-dependent phenylacetaldehyde dehydrogenase. The reduced CO-difference spectrum of microsomal preparations of styrene-grown cells shows a characteristic absorption maximum at 450 nm, which strongly suggests the involvement of a cytochrome P-450-dependent styrene monooxygenase. Inhibition of styrene monooxygenase activity in cell extracts by cytochrome P-450 inhibitors SKF-525-A, metyrapone, and CO confirms this assumption.     

Differences in internal dynamics of actin under different structural states detected by neutron scattering

F-actin, a helical polymer formed by polymerization of the monomers (G-actin), plays crucial roles in various aspects of cell motility. Flexibility of F-actin has been suggested to be important for such a variety of functions. Understanding the flexibility of F-actin requires characterization of a hierarchy of dynamical properties, from internal dynamics of the actin monomers through domain motions within the monomers and relative motions between the monomers within F-actin to large-scale motions of F-actin as a whole. As a first step toward this ultimate purpose, we carried out elastic incoherent neutron scattering experiments on powders of F-actin and G-actin hydrated with D₂O and characterized the internal dynamics of F-actin and G-actin. Well established techniques and analysis enabled the extraction of mean-square displacements and their temperature dependence in F-actin and in G-actin. An effective force constant analysis with a model consisting of three energy states showed that two dynamical transitions occur at ∼150 K and ∼245 K, the former of which corresponds to the onset of anharmonic motions and the latter of which couples with the transition of hydration water. It is shown that behavior of the mean-square displacements is different between G-actin and F-actin, such that G-actin is “softer” than F-actin. The differences in the internal dynamics are detected for the first time between the different structural states (the monomeric state and the polymerized state). The different behavior observed is ascribed to the differences in dynamical heterogeneity between F-actin and G-actin. Based on structural data, the assignment of the differences observed in the two samples to dynamics of specific loop regions involved in the polymerization of G-actin into F-actin is proposed.