The coupling of tight DNA binding and base flipping: identification of a conserved structural motif in base flipping enzymes

Val(121) is positioned immediately above the extrahelical cytosine in HhaI DNA C(5)-cytosine methyltransferase, and replacement with alanine dramatically interferes with base flipping and catalysis. DNA binding and k(cat) are decreased 10(5)-fold for the Val(121) --> Ala mutant that has a normal circular dichroism spectrum and AdoMet affinity. The magnitude of this loss of function is comparable with removal of the essential catalytic Cys(81). Surprisingly, DNA binding is completely recovered (increase of 10(5)-fold) with a DNA substrate lacking the target cytosine base (abasic). Thus, interfering with the base flipping transition results in a dramatic loss of binding energy. Our data support an induced fit mechanism in which tight DNA binding is coupled to both base flipping and protein loop rearrangement. The importance of the proximal protein segment (His(127)-Thr(132)) in maintaining this critical interaction between Val(121) and the flipped cytosine was probed with single site alanine substitutions. None of these mutants are significantly altered in secondary structure, AdoMet or DNA affinity, k(methylation), k(inactivation), or k(cat). Although Val(121) plays a critical role in both extrahelical base stabilization and catalysis, its position and mobility are not influenced by individual residues in the adjacent peptide region. Structural comparisons with other DNA methyltransferases and DNA repair enzymes that stabilize extrahelical nucleotides reveal a motif that includes a positively charged or polar side chain and a hydrophobic residue positioned adjacent to the target DNA base and either the 5'- or 3'-phosphate.     

Effect of S-adenosyl-L-methionine and its analogs on site-specific binding DNA-(adenine-N6)-methyltransferase from T4 phage to the oligonucleotide substrate

Using fluorescence of 2-aminopurine-substituted oligonucleotide duplexes, "flipping" of the target base in the process of interaction of T4 DNA-(adenine-N6)-methyltransferase (EC 2.1.1.72) with the substrate double-stranded DNA was revealed. It was shown that S-adenosyl-L-methionine, the methyl group donor, induces the reorientation of the enzyme relative to the asymmetrically modified recognition site.     

Molecular enzymology of the EcoRV DNA-(Adenine-N (6))-methyltransferase: kinetics of DNA binding and bending, kinetic mechanism and linear diffusion of the enzyme on DNA

The EcoRV DNA-(adenine-N(6))-methyltransferase recognizes GATATC sequences and modifies the first adenine residue within this site. We show here, that the enzyme binds to the DNA and the cofactor S-adenosylmethionine (AdoMet) in an ordered bi-bi fashion, with AdoMet being bound first. M.EcoRV binds DNA in a non-specific manner and the enzyme searches for its recognition site by linear diffusion with a range of approximately 1800 bp. During linear diffusion the enzyme continuously scans the DNA for the presence of recognition sites. Upon specific M.EcoRV-DNA complex formation a strong increase in the fluorescence of an oligonucleotide containing a 2-aminopurine base analogue at the GAT-2AP-TC position is observed which, most likely, is correlated with DNA bending. In contrast to the GAT-2AP-TC substrate, a G-2AP-TATC substrate in which the target base is replaced by 2-aminopurine does not show an increase in fluorescence upon M.EcoRV binding, demonstrating that 2-aminopurine is not a general tool to detect base flipping. Stopped-flow experiments show that DNA bending is a fast process with rate constants >10 s(-1). In the presence of cofactor, the specific complex adopts a second conformation, in which the target sequence is more tightly contacted by the enzyme. M.EcoRV exists in an open and in a closed state that are in slow equilibrium. Closing the open state is a slow process (rate constant approximately 0.7 min(-1)) that limits the rate of DNA methylation under single turnover conditions. Product release requires opening of the closed complex which is very slow (rate constant approximately 0.05-0.1 min(-1)) and limits the rate of DNA methylation under multiple turnover conditions. M.EcoRV methylates DNA sequences containing more than one recognition sites in a distributive manner. Since the dissociation rate from non-specific DNA does not depend on the length of the DNA fragment, DNA dissociation does not preferentially occur at the ends of the DNA.     

Single turnover kinetics of phage T4 DNA-(N6-adenine)methyltransferase

Interaction of T4 DNA-(N6-adenine)-methyltransferase [EC 2.1.1] was studied with a variety of synthetic oligonucleotide substrates containing the native recognition site GATC or its modified variants. The data obtained in the decisecond and second intervals of the reaction course allowed for the first time the substrate methylation rates to be compared with the parameters of the steady-state reaction. It was established that the substrate reaction proceeds in two stages. Because it is shown that in steady-state conditions T4 MTase forms a dimeric structure, the following sequence of events is assumed. Upon collision of a T4 MTase monomer with an oligonucleotide duplex, an asymmetrical complex forms in which the enzyme randomly oriented relative to one of the strands of the specific recognition site catalyzes a fast transfer of the methyl group from S-adenosylmethionine to the adenosine residue (k1 = 0.21 s-1). Simultaneously, a second T4 MTase subunit is added to the complex, providing for the continuation of the reaction. In the course of a second stage, which is by an order of magnitude slower (k2 = 0.023 s-1 for duplex with the native site), the dimeric T4 MTase switches over to the second strand and the methylation of the second residue, target. The rate of the methyl group transfer from donor, S-adenosylmethionine, to DNA is much higher than the overall rate of the T4 MTase-catalyzed steady-state reaction, although this difference is considerably less than that shown for EcoRI Mtase. Substitutions of bases and deletions in the recognition site affect the substrate parameters in different fashions. When the GAT sequence is disrupted, the proportion of the initial productive enzyme-substrate complexes is usually sharply reduced. The flipping of the adenosine residue, a target for the modification in the recognition site, revealed by fluorescence titration, upon interaction with the enzyme supports the existing notions about the involvement of such a DNA deformation in reactions catalyzed by various DNA-MTases.     

Two alternative conformations of S-adenosyl-L-homocysteine bound to Escherichia coli DNA adenine methyltransferase and the implication of conformational changes in regulating the catalytic cycle

The crystal structure of the Escherichia coli DNA adenine methyltransferase (EcoDam) in a binary complex with the cofactor product S-adenosyl-L-homocysteine (AdoHcy) unexpectedly showed the bound AdoHcy in two alternative conformations, extended or folded. The extended conformation represents the catalytically competent conformation, identical to that of EcoDam-DNA-AdoHcy ternary complex. The folded conformation prevents catalysis, because the homocysteine moiety occupies the target Ade binding pocket. The largest difference between the binary and ternary structures is in the conformation of the N-terminal hexapeptide ((9)KWAGGK(14)). Cofactor binding leads to a strong change in the fluorescence of Trp(10), whose indole ring approaches the cofactor by 3.3A(.) Stopped-flow kinetics and AdoMet cross-linking studies indicate that the cofactor prefers binding to the enzyme after preincubation with DNA. In the presence of DNA, AdoMet binding is approximately 2-fold stronger than AdoHcy binding. In the binary complex the side chain of Lys(14) is disordered, whereas Lys(14) stabilizes the active site in the ternary complex. Fluorescence stopped-flow experiments indicate that Lys(14) is important for EcoDam binding of the extrahelical target base into the active site pocket. This suggests that the hexapeptide couples specific DNA binding (Lys(9)), AdoMet binding (Trp(10)), and insertion of the flipped target base into the active site pocket (Lys(14)).     

Kinetic and catalytic properties of dimeric KpnI DNA methyltransferase

KpnI DNA-(N(6)-adenine)-methyltransferase (KpnI MTase) is a member of a restriction-modification (R-M) system in Klebsiella pneumoniae and recognizes the sequence 5'-GGTACC-3'. It modifies the recognition sequence by transferring the methyl group from S-adenosyl-l-methionine (AdoMet) to the N(6) position of adenine residue. KpnI MTase occurs as a dimer in solution as shown by gel filtration and chemical cross-linking analysis. The nonlinear dependence of methylation activity on enzyme concentration indicates that the functionally active form of the enzyme is also a dimer. Product inhibition studies with KpnI MTase showed that S-adenosyl-l-homocysteine is a competitive inhibitor with respect to AdoMet and noncompetitive inhibitor with respect to DNA. The methylated DNA showed noncompetitive inhibition with respect to both DNA and AdoMet. A reduction in the rate of methylation was observed at high concentrations of duplex DNA. The kinetic analysis where AdoMet binds first followed by DNA, supports an ordered bi bi mechanism. After methyl transfer, methylated DNA dissociates followed by S-adenosyl-l-homocysteine. Isotope-partitioning analysis showed that KpnI MTase-AdoMet complex is catalytically active.     

How PspGI, catalytic domain of EcoRII and Ecl18kI acquire specificities for different DNA targets

Restriction endonucleases Ecl18kI and PspGI/catalytic domain of EcoRII recognize CCNGG and CCWGG sequences (W stands for A or T), respectively. The enzymes are structurally similar, interact identically with the palindromic CC:GG parts of their recognition sequences and flip the nucleotides at their centers. Specificity for the central nucleotides could be influenced by the strength/stability of the base pair to be disrupted and/or by direct interactions of the enzymes with the flipped bases. Here, we address the importance of these contributions. We demonstrate that wt Ecl18kI cleaves oligoduplexes containing canonical, mismatched and abasic sites in the central position of its target sequence CCNGG with equal efficiencies. In contrast, substitutions in the binding pocket for the extrahelical base alter the Ecl18kI preference for the target site: the W61Y mutant prefers only certain mismatched substrates, and the W61A variant cuts exclusively at abasic sites, suggesting that pocket interactions play a major role in base discrimination. PspGI and catalytic domain of EcoRII probe the stability of the central base pair and the identity of the flipped bases in the pockets. This ‘double check’ mechanism explains their extraordinary specificity for an A/T pair in the flipping position.     

Structures of liganded and unliganded RsrI N6-adenine DNA methyltransferase: a distinct orientation for active cofactor binding

The structures of RsrI DNA methyltransferase (M.RsrI) bound to the substrate S-adenosyl-l-methionine (AdoMet), the product S-adenosyl-l-homocysteine (AdoHcy), the inhibitor sinefungin, as well as a mutant apo-enzyme have been determined by x-ray crystallography. Two distinct binding configurations were observed for the three ligands. The substrate AdoMet adopts a bent shape that directs the activated methyl group toward the active site near the catalytic DPPY motif. The product AdoHcy and the competitive inhibitor sinefungin bind with a straight conformation in which the amino acid moiety occupies a position near the activated methyl group in the AdoMet complex. Analysis of ligand binding in comparison with other DNA methyltransferases reveals a small, common subset of available conformations for the ligand. The structures of M.RsrI with the non-substrate ligands contained a bound chloride ion in the AdoMet carboxylate-binding pocket, explaining its inhibition by chloride salts. The L72P mutant of M.RsrI is the first DNA methyltransferase structure without bound ligand. With respect to the wild-type protein, it had a larger ligand-binding pocket and displayed movement of a loop (223-227) that is responsible for binding the ligand, which may account for the weaker affinity of the L72P mutant for AdoMet. These studies show the subtle changes in the tight specific interactions of substrate, product, and an inhibitor with M.RsrI and help explain how each displays its unique effect on the activity of the enzyme.     

Symmetry elements in DNA structure important for recognition/methylation by DNA [amino]-methyltransferases

The phage T4Dam and EcoDam DNA-[adenine-N6] methyltransferases (MTases) methylate GATC palindromic sequences, while the BamHI DNA-[cytosine-N4] MTase methylates the GGATCC palindrome (which contains GATC) at the internal cytosine residue. We compared the ability of these enzymes to interact productively with defective duplexes in which individual elements were deleted on one chain. A sharp decrease in k_cat was observed for all three enzymes if a particular element of structural symmetry was disrupted. For the BamHI MTase, integrity of the ATCC was critical, while an intact GAT sequence was necessary for the activity of T4Dam, and an intact GA was necessary for EcoDam. Theoretical alignment of the region of best contacts between the protein and DNA showed that in the case of a palindromic interaction site, a zone covering the 5′-symmetric residues is located in the major groove versus a zone of contact covering the 3′-symmetric residues in the minor groove. Our data fit a simple rule of thumb that the most important contacts are aligned around the methylation target base: if the target base is in the 5′ half of the palindrome, the interaction between the enzyme and the DNA occurs mainly in the major groove; if it is in the 3′ half, the interaction occurs mainly in the minor groove.     

Pre-steady state kinetics of bacteriophage T4 dam DNA-[N(6)-adenine] methyltransferase: interaction with native (GATC) or modified sites

The DNA methyltransferase of bacteriophage T4 (T4 Dam MTase) recognizes the palindromic sequence GATC, and catalyzes transfer of the methyl group from S:-adenosyl-L-methionine (AdoMet) to the N(6)-position of adenine [generating N(6)-methyladenine and S:-adenosyl-L-homocysteine (AdoHcy)]. Pre-steady state kinetic analysis revealed that the methylation rate constant k(meth) for unmethylated and hemimethylated substrates (0.56 and 0.47 s(-1), respectively) was at least 20-fold larger than the overall reaction rate constant k(cat) (0.023 s(-1)). This indicates that the release of products is the rate-limiting step in the reaction. Destabilization of the target-base pair did not alter the methylation rate, indicating that the rate of target nucleoside flipping does not limit k(meth). Preformed T4 Dam MTase-DNA complexes are less efficient than preformed T4 Dam MTase-AdoMet complexes in the first round of catalysis. Thus, this data is consistent with a preferred route of reaction for T4 Dam MTase in which AdoMet is bound first; this preferred reaction route is not observed with the DNA-[C5-cytosine]-MTases.     

Conserved sequence motif DPPY in region IV of the phage T4 Dam DNA-[N6-adenine]-methyltransferase is important for S-adenosyl-L-methionine binding.

Comparison of the deduced amino acid sequences of DNA-[N6-adenine]-methyltransferases has revealed several conserved regions. All of these enzymes contain a DPPY [or closely related] motif. By site-directed mutagenesis of a cloned T4 dam gene, we have altered the first proline residue in this motif [located in conserved region IV of the T4 Dam-MTase] to alanine or threonine. The mutant enzymic forms, P172A and P172T, were overproduced and purified. Kinetic studies showed that compared to the wild-type [wt] the two mutant enzymic forms had: (i) an increased [5 and 20-fold, respectively] Km for substrate, S-adenosyl-methionine [AdoMet]; (ii) a slightly reduced [2 and 4-fold lower] kcat; (iii) a strongly reduced kcat/KmAdoMet [10 and 100-fold]; and (iv) almost the same Km for substrate DNA. Equilibrium dialysis studies showed that the mutant enzymes had a reduced [4 and 9-fold lower] Ka for AdoMet. Taken together these data indicate that the P172A and P172T alterations resulted primarily in a reduced affinity for AdoMet. This suggests that the DPPY-motif is important for AdoMet-binding, and that region IV contains or is part of an AdoMet-binding site.     

Functional analysis of an acid adaptive DNA adenine methyltransferase from Helicobacter pylori 26695

HP0593 DNA-(N(6)-adenine)-methyltransferase (HP0593 MTase) is a member of a Type III restriction-modification system in Helicobacter pylori strain 26695. HP0593 MTase has been cloned, overexpressed and purified heterologously in Escherichia coli. The recognition sequence of the purified MTase was determined as 5'-GCAG-3'and the site of methylation was found to be adenine. The activity of HP0593 MTase was found to be optimal at pH 5.5. This is a unique property in context of natural adaptation of H. pylori in its acidic niche. Dot-blot assay using antibodies that react specifically with DNA containing m6A modification confirmed that HP0593 MTase is an adenine-specific MTase. HP0593 MTase occurred as both monomer and dimer in solution as determined by gel-filtration chromatography and chemical-crosslinking studies. The nonlinear dependence of methylation activity on enzyme concentration indicated that more than one molecule of enzyme was required for its activity. Analysis of initial velocity with AdoMet as a substrate showed that two molecules of AdoMet bind to HP0593 MTase, which is the first example in case of Type III MTases. Interestingly, metal ion cofactors such as Co(2+), Mn(2+), and also Mg(2+) stimulated the HP0593 MTase activity. Preincubation and isotope partitioning analyses clearly indicated that HP0593 MTase-DNA complex is catalytically competent, and suggested that DNA binds to the MTase first followed by AdoMet. HP0593 MTase shows a distributive mechanism of methylation on DNA having more than one recognition site. Considering the occurrence of GCAG sequence in the potential promoter regions of physiologically important genes in H. pylori, our results provide impetus for exploring the role of this DNA MTase in the cellular processes of H. pylori.     

Role of base flipping in specific recognition of damaged DNA by repair enzymes

DNA repair enzymes induce base flipping in the process of damage recognition. Endonuclease V initiates the repair of cis, syn thymine dimers (TD) produced in DNA by UV radiation. The enzyme is known to flip the base opposite the damage into a non-specific binding pocket inside the protein. Uracil DNA glycosylase removes a uracil base from G.U mismatches in DNA by initially flipping it into a highly specific pocket in the enzyme. The contribution of base flipping to specific recognition has been studied by molecular dynamics simulations on the closed and open states of undamaged and damaged models of DNA. Analysis of the distributions of bending and opening angles indicates that enhanced base flipping originates in increased flexibility of the damaged DNA and the lowering of the energy difference between the closed and open states. The increased flexibility of the damaged DNA gives rise to a DNA more susceptible to distortions induced by the enzyme, which lowers the barrier for base flipping. The free energy profile of the base-flipping process was constructed using a potential of mean force representation. The barrier for TD-containing DNA is 2.5 kcal mol(-1) lower than that in the undamaged DNA, while the barrier for uracil flipping is 11.6 kcal mol(-1) lower than the barrier for flipping a cytosine base in the undamaged DNA. The final barriers for base flipping are approximately 10 kcal mol(-1), making the rate of base flipping similar to the rate of linear scanning of proteins on DNA. These results suggest that damage recognition based on lowering the barrier for base flipping can provide a general mechanism for other DNA-repair enzymes.     

Base Flipping in Tn10 Transposition: An Active Flip and Capture Mechanism

The bacterial Tn5 and Tn10 transposases have a single active site that cuts both strands of DNA at their respective transposon ends. This is achieved using a hairpin intermediate that requires the DNA to change conformation during the reaction. In Tn5 these changes are controlled in part by a flipped nucleoside that is stacked on a tryptophan residue in a hydrophobic pocket of the transposase. Here we have investigated the base flipping mechanism in Tn10 transposition. As in Tn5 transposition, we find that base flipping takes place after the first nick and is required for efficient hairpin formation and resolution. Experiments with an abasic substrate show that the role of base flipping in hairpin formation is to remove the base from the DNA helix. Specific interactions between the flipped base and the stacking tryptophan residue are required for hairpin resolution later in the reaction. We show that base flipping in Tn10 transposition is not a passive reaction in which a spontaneously flipped base is captured and retained by the protein. Rather, it is driven in part by a methionine probe residue that helps to force the flipped base from the base stack. Overall, it appears that base flipping in Tn10 transposition is similar to that in Tn5 transposition.     

Nucleotide flipping by restriction enzymes analyzed by 2-aminopurine steady-state fluorescence

Many DNA modification and repair enzymes require access to DNA bases and therefore flip nucleotides. Restriction endonucleases (REases) hydrolyze the phosphodiester backbone within or in the vicinity of the target recognition site and do not require base extrusion for the sequence readout and catalysis. Therefore, the observation of extrahelical nucleotides in a co-crystal of REase Ecl18kI with the cognate sequence, CCNGG, was unexpected. It turned out that Ecl18kI reads directly only the CCGG sequence and skips the unspecified N nucleotides, flipping them out from the helix. Sequence and structure conservation predict nucleotide flipping also for the complexes of PspGI and EcoRII with their target DNAs (/CCWGG), but data in solution are limited and indirect. Here, we demonstrate that Ecl18kI, the C-terminal domain of EcoRII (EcoRII-C) and PspGI enhance the fluorescence of 2-aminopurines (2-AP) placed at the centers of their recognition sequences. The fluorescence increase is largest for PspGI, intermediate for EcoRII-C and smallest for Ecl18kI, probably reflecting the differences in the hydrophobicity of the binding pockets within the protein. Omitting divalent metal cations and mutation of the binding pocket tryptophan to alanine strongly increase the 2-AP signal in the Ecl18kI–DNA complex. Together, our data provide the first direct evidence that Ecl18kI, EcoRII-C and PspGI flip nucleotides in solution.     

DNA (cytosine-N4-)- and -(adenine-N6-)-methyltransferases have different kinetic mechanisms but the same reaction route. A comparison of M.BamHI and T4 Dam

We studied the kinetics of methyl group transfer by the BamHI DNA-(cytosine-N(4)-)-methyltransferase (MTase) from Bacillus amyloliquefaciens to a 20-mer oligodeoxynucleotide duplex containing the palindromic recognition site GGATCC. Under steady state conditions the BamHI MTase displayed a simple kinetic behavior toward the 20-mer duplex. There was no apparent substrate inhibition at concentrations much higher than the K(m) for either DNA (100-fold higher) or S-adenosyl-l-methionine (AdoMet) (20-fold higher); this indicates that dead-end complexes did not form in the course of the methylation reaction. The DNA methylation rate was analyzed as a function of both substrate and product concentrations. It was found to exhibit product inhibition patterns consistent with a steady state random bi-bi mechanism in which the dominant order of substrate binding and product release (methylated DNA, DNA(Me), and S-adenosyl-l-homocysteine, AdoHcy) was Ado-Met DNA DNA(Me) AdoHcy. The M.BamHI kinetic scheme was compared with that for the T4 Dam (adenine-N(6)-)-MTase. The two differed with respect to an effector action of substrates and in the rate-limiting step of the reaction (product inhibition patterns are the same for the both MTases). From this we conclude that the common chemical step in the methylation reaction, methyl transfer from AdoMet to a free exocyclic amino group, is not sufficient to dictate a common kinetic scheme even though both MTases follow the same reaction route.     

Single Turnover Kinetics of Methylation by T4 DNA-(N6-Adenine)-Methyltransferase

Interaction of T4 DNA-(N6-adenine)-methyltransferase was studied with a variety of synthetic oligonucleotide substrates containing the native recognition site GATC or its modified variants. The data obtained in the decisecond and second intervals of the reaction course allowed for the first time the substrate methylation rates to be compared with the parameters of the steady-state reaction. It was established that the substrate reaction proceeds in two stages. Because it is shown that in steady-state conditions T4 MTase forms a dimeric structure, the following sequence of events is assumed. Upon collision of a T4 MTase monomer with an oligonucleotide duplex, an asymmetrical complex forms in which the enzyme randomly oriented relative to one of the strands of the specific recognition site catalyzes a fast transfer of the methyl group from S-adenosylmethionine to the adenosine residue (k ₁ = 0.21 s^–1). Simultaneously, a second T4 MTase subunit is added to the complex, providing for the continuation of the reaction. In the course of a second stage, which is by an order of magnitude slower (k ₂ = 0.023 s^–1 for duplex with the native site), the dimeric T4 MTase switches over to the second strand and the methylation of the second residue, target. The rate of the methyl group transfer from donor, S-adenosylmethionine, to DNA is much higher than the overall rate of the T4 MTase-catalyzed steady-state reaction, although this difference is considerably less than that shown for EcoRI MTase. Base substitutions and deletions in the recognition site affect the substrate parameters in different fashions. When the GAT sequence is disrupted, the proportion of the initial productive enzyme–substrate complexes is usually sharply reduced. The flipping of the adenosine residue to be modified in the recognition site upon interaction with the enzyme, revealed by fluorescence titration, supports the existing notions about the involvement of such a DNA deformation in reactions catalyzed by various DNA-MTases.     

Binding of EcoP15I DNA methyltransferase to DNA reveals a large structural distortion within the recognition sequence

EcoP15I DNA methyltransferase, a member of the type III restriction-modification system, binds to the sequence 5'-CAGCAG-3' transferring a methyl group from S-adenosyl-l-methionine to the second adenine base. We have investigated protein-DNA interactions in the methylase-DNA complex by three methods. Determination of equilibrium dissociation constants indicated that the enzyme had higher affinity for DNA containing mismatches at the target base within the recognition sequence. Potassium permanganate footprinting studies revealed that there was a hyper-reactive permanganate cleavage site coincident with adenine that is the target base for methylation. More importantly, to detect DNA conformational alterations within the enzyme-DNA complexes, we have used a fluorescence-based assay. When EcoP15I DNA methyltransferase bound to DNA containing 2-aminopurine substitutions within the cognate sequence, an eight to tenfold fluorescent enhancement resulting from enzymatic flipping of the target adenine base was observed. Furthermore, fluorescence spectroscopy analysis showed that the changes attributable to structural distortion were specific for only the bases within the recognition sequence. More importantly, we observed that both the adenine bases in the recognition site appear to be structurally distorted to the same extent. While the target adenine base is probably flipped out of the DNA duplex, our results also suggest that fluorescent enhancements could be derived from protein-DNA interactions other than base flipping. Taken together, our results support the proposed base flipping mechanism for adenine methyltransferases.     

Mutational analysis of the catalytic domain of the murine Dnmt3a DNA-(cytosine C5)-methyltransferase

On the basis of amino acid sequence alignments and structural data of related enzymes, we have performed a mutational analysis of 14 amino acid residues in the catalytic domain of the murine Dnmt3a DNA-(cytosine C5)-methyltransferase. The target residues are located within the ten conserved amino acid sequence motifs characteristic for cytosine-C5 methyltransferases and in the putative DNA recognition domain of the enzyme (TRD). Mutant proteins were purified and tested for their catalytic properties and their abilities to bind DNA and AdoMet. We prepared a structural model of Dnmt3a to interpret our results. We demonstrate that Phe50 (motif I) and Glu74 (motif II) are important for AdoMet binding and catalysis. D96A (motif III) showed reduced AdoMet binding but increased activity under conditions of saturation with S-adenosyl-L-methionine (AdoMet), indicating that the contact of Asp96 to AdoMet is not required for catalysis. R130A (following motif IV), R241A and R246A (in the TRD), R292A, and R297A (both located in front of motif X) showed reduced DNA binding. R130A displayed a strong reduction in catalytic activity and a complete change in flanking sequence preferences, indicating that Arg130 has an important role in the DNA interaction of Dnmt3a. R292A also displayed reduced activity and changes in the flanking sequence preferences, indicating a potential role in DNA contacts farther away from the CG target site. N167A (motif VI) and R202A (motif VIII) have normal AdoMet and DNA binding but reduced catalytic activity. While Asn167 might contribute to the positioning of residues from motif VI, according to structural data Arg202 has a role in catalysis of cytosine-C5 methyltransferases. The R295A variant was catalytically inactive most likely because of destabilization of the hinge sub-domain of the protein.     

Positively charged residues within the iron-sulfur cluster loop of E. coli MutY participate in damage recognition and removal

Escherichia coli MutY is an adenine glycosylase involved in base excision repair that recognizes OG:A (where OG = 7, 8-dihydro-8-oxo-2'-deoxyguanosine) and G:A mismatches in DNA. MutY contains a solvent-exposed polypeptide loop between two of the cysteine ligands to the [4Fe-4S](2+) cluster, referred to as the iron-sulfur cluster loop (FCL) motif. The FCL is located adjacent to the proposed active site pocket and has been suggested to be part of the DNA binding surface of MutY (Y. Guan et al., 1998, Nat. Struct. Biol. 5, 1058-1064). In order to investigate the role of specific residues within the FCL motif, we have determined the effects of replacing arginine 194, lysine 196, and lysine 198 with alanine on the enzymatic properties of MutY. The properties of the R194A, K196A, and K198A enzymes were also compared to the properties of mutated enzymes in which lysine residues near the active site pocket were replaced with alanine or glycine. Substrate recognition was evaluated using a duplex containing a 2'-deoxyadenosine analog in a base pair opposite G or OG. These results indicate that removal of positively charged amino acids within the FCL and the active site compromise the ability of the enzyme to bind to the substrate analog. However, only the K198A enzyme exhibited a significant reduction (15-fold) of the rate of adenine removal from a G:A base pair-containing duplex. This is the first direct evidence that Lys 198 within the FCL motif of MutY has a role in specific damage recognition and removal. Furthermore, these results suggest that the FCL motif is intimately involved in the base removal process.