Molecular analysis of the Lactococcus lactis subspecies lactis CNRZ270 bidirectional theta replicating lactose plasmid pUCL22

pUCL22 is the lactose protease plasmid of Lactococcus lactis ssp. lactis CNRZ270. The nucleotide sequence of its replication region Rep22 contains a non-transcribed region, the replication origin, followed by a gene encoding a putative 388-amino-acid protein named Rep22A. The promoter regions of the rep22A and pC194 cat genes share strong similarities and the pUCL22 replicon exerted trans or cis negative control on the pC194 cat gene expression in L. lactis. We suggest that Rep22A binds to its own promoter as well as to the pC194 cat promoter and thus is autoregulated. We show that pUCL22 replicates mainly by a bidirectional theta mechanism in L. lactis, and is representative of a widely distributed replicon family, members of which could be co-resident. We propose that compatibility between these closely related replicons results from minor replication protein modifications coupled with base changes in their respective binding sites, supporting the co-existence of numerous related replicons in lactococcal strains.     

Structural and functional organization of ColE2 and ColE3 replicons

Summary The complete nucleotide sequences of the 1.5 kb regions of ColE2 and ColE3 plasmids containing the segments sufficient for autonomous replication have been determined. They are quite homologous (greater than 90%), indicating that these two plasmids share common mechanisms of initiation of replication and its regulation. An open reading frame with a coding capacity for a protein of about 300 amino acids is present in both ColE2 and ColE3 and it actually specifies the Rep (for replication) protein, which is the plasmid specific trans-acting factor required for autonomous replication. The amino acid sequences of the Rep proteins of ColE2 and ColE3 are quite homologous (greater than 90%). The cis-acting sites (origins) where replication initiates in the presence of the trans-acting factors consist of 32 bp for ColE2 and 33 bp for ColE3. They are the smallest of all the prokaryotic replication origins so far reported. They are nonhomologous only at two positions, one of which, a deletion of a single nucleotide in ColE2 (or an insertion in ColE3), determines the plasmid specificity in interaction of the origins with the Rep proteins. Both plasmids carry a region with an identical nucleotide sequence and the one in ColE2, the IncA region, has been shown to express incompatibility against both ColE2 and ColE3. These results indicate that these plasmids share a common IncA determinant. A possibility that a small antisense RNA is involved in copy number control and incompatibility (IncA function) was suggested.     

Molecular Characterization of a Theta Replication Plasmid and Its Use for Development of a Two-Component Food-Grade Cloning System for Lactococcus lactis

pCD4, a small, highly stable theta-replicating lactococcal plasmid, was used to develop a food-grade cloning system. Sequence analysis revealed five open reading frames and two putative cis-acting regions. None appears to code for undesirable phenotypes with regard to food applications. Functional analysis of the replication module showed that only the cis-acting ori region and the repB gene coding for the replication initiator protein were needed for the stable replication and maintenance of pCD4 derivatives in Lactococcus lactis. A two-component food-grade cloning system was derived from the pCD4 replicon. The vector pVEC1, which carries the functional pCD4 replicon, is entirely made up of L. lactis DNA and has no selection marker. The companion pCOM1 is a repB-deficient pCD4 derivative that carries an erythromycin resistance gene as a dominant selection marker. The pCOM1 construct can only replicate in L. lactis if trans complemented by the RepB initiator provided by pVEC1. Since only the cotransformants that carry both pVEC1 and pCOM1 can survive on plates containing erythromycin, pCOM1 can be used transiently to select cells that have acquired pVEC1. Due to the intrinsic incompatibility between these plasmids, pCOM1 can be readily cured from the cells grown on an antibiotic-free medium after the selection step. The system was used to introduce a phage resistance mechanism into the laboratory strain MG1363 of L. lactis and two industrial strains. The introduction of the antiphage barrier did not alter the wild-type plasmid profile of the industrial strains. The phenotype was stable after 100 generations and conferred an effective resistance phenotype against phages of the 936 and c2 species.     

Construction,properties, and application of the pCB5 plasmid,a novel conjugative shuttle vector with a Cupriavidus basilensis origin of replication

Cupriavidus basilensis is a species with diverse metabolic capabilities, including degradation of xenobiotics and heavy metal resistance. Although the genomes of several strains of this species have been sequenced, no plasmid has yet been constructed for genetic engineering in this species. In this study, we identified a novel plasmid, designated pWS, from C. basilensis WS with a copy number of 1–3 per cell and a length of 2150 bp. pWS contained three protein-coding genes, among which only rep was required for plasmid replication. Rep showed no homology with known plasmid replication initiators. Unlike most plasmids, pWS did not have a cis-acting replication origin outside the region of rep. The minimal replicon of pWS was stable in C. basilensis WS without selection. A conjugative C. basilensis/Escherichia coli shuttle vector, pCB5, was constructed using the minimal replicon of pWS. Interestingly, the copy number of pCB5 was flexible and could be manipulated. Enhancing the expression level of Rep in pCB5 by either doubling the promoter or coding region of rep resulted in doubling of the plasmid copy number. Moreover, replacing the native promoter of rep with the lac promoter increased the copy number by over fivefold. Finally, using two different β-galactosidase reporting systems constructed with pCB5, we successfully demonstrated the different regulatory patterns of bph and dmp operons during diphenyl ether (DE) degradation in C. basilensis WS. Thus, this shuttle vector provided an efficient tool for DNA cloning and metabolic engineering in C. basilensis.

     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

 Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication. Received: 15 May 1996/Accepted: 11 July 1996     

Sequence heterogeneity and differential expression of the α-Amy2 gene family in wheat

Summary Within plasmid pUB110 we have identified a 1.2 kb segment necessary and sufficient for driving autonomous replication in Rec⁺ cells at a wild-type copy number. This region can be divided into three functionally discrete segments: a 24 base pair (bp) region that acts as an origin, a 949 bp determinant of an essential replication protein, repU, and a 358 bp incompatibility region, incA, overlapping with the repU gene. The synthesis of the IncA determinant/s proceeds in the direction opposite to that of RepU. The positively (RepU) and negatively (IncA) trans-acting products seem to be involved in the control of plasmid replication. The RepU product has an M_r of 39 kDa, could be overproduced in Escherichia coli, and binds to the pUB110 origin region. Outside the minimal replicon a cis-acting, orientation dependent, 516 bp determinant is required (i) to compete with a coexisting incompatible plasmid and (ii) for segregational stability.     

Roles of Escherichia coli heat shock proteins DnaK, DnaJ and GrpE in mini-F plasmid replication

Summary A subset of Escherichia coli heat shock proteins, DnaK, DnaJ and GrpE were shown to be required for replication of mini-F plasmid. Strains of E. coli K12 carrying a missense mutation or deletion in the dnaK, dnaJ, or grpE gene were virtually unable to be transformed by mini-F DNA at the temperature (30° C) that permits cell growth. When excess amounts of the replication initiator protein (repE gene product) of mini-F were provided by means of a multicopy plasmid carrying repE, these mutant bacteria became capable of supporting mini-F replication under the same conditions. However, the copy number of a high copy number mini-F plasmid was reduced in these mutant bacteria as compared with the wild type in the presence of excess RepE protein. Furthermore, mini-F plasmid mutants that produce altered initiator protein and exhibit a very high copy number were able to replicate in strains deficient in any of the above heat shock proteins. These results indicate that the subset of heat shock proteins (DnaK, DnaJ and GrpE) play essential roles that help the functioning of the RepE initiator protein in mini-F DNA replication.     

Sequences Essential for Replication of Plasmid pIJ101 in Streptomyces lividans

A 2.1-kb SacII DNA fragment of the high-copy-number Streptomyces lividans plasmid pIJ101 previously has been shown to include the functions required for maintenance of pIJ101 as an extrachromosomal replicon. This fragment contains the open translational reading frames rep and orf 56 plus an intervening segment believed to be noncoding. Using deletion mutations, we show that the pIJ101 replication origin and other cis -acting sites necessary and sufficient for replication map to a DNA segment that extends 515 bp 5′ to the translational start of Rep and lacks orf56. Plasmids that include this segment are maintained in S. lividans as extrachromosomal replicons when complemented in trans by the rep gene product.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.     

Development and application of molecular tools in the study of IncN-related plasmids from lakewater sediments

Homology to IncN, P, Q and W inc regions was investigated amongst 114 Hg(2+)-resistant or antibiotic-resistant bacteria isolated from lakewater sediments. No hybridisation signals were found with Inc P, Q and W probes, and only one plasmid, pLV1402, hybridised to the IncN probe. PCR primers designed to conserved regions in the replicon of the IncN plasmid pCU1 and the related beta replicon from pGSH500 were used to amplify a 978-bp fragment from pLV1402, with sequence analysis showing a close relationship (99.2% identity) between their replication genes. A 387-bp region from the pLV1402 rep gene was used to re-screen the isolates and identified another related plasmid, pLV1403. A 3.7-kb probe containing the alpha replicon from pGSH500 hybridised to both pLV1402 and pLV1403, suggesting that both are multi-replicon plasmids. The PCR primers and probes described will be useful in future studies of plasmid diversity.     

Characterization of the replication region of the Lactobacillus reuteri plasmid pTC82 potentially used in the construction of cloning vector

A 3.2 kb DNA fragment containing the replication region (RR) from pTC82 was cloned, sequenced, and found to contain elements typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR), including double-strand origin (DSO), replication protein gene (rep), and single-strand origin (SSO). The DSO of pTC82 contains two domains showing 55.5% and 84.6% similarities in nucleotide (nt) sequence to the conserved functional elements bind and nic, respectively, which are required for the initiation of the leading strand typical of the pC194-RCR family. Although the predicted rep gene product of pTC82 (Rep82) shares little identity (less than 24%) with other known Reps, a region containing three motifs, characteristic of the pC194-family Reps, was identified, indicating the Rep82 as a novel Rep protein of this family. Downstream of the rep82 gene, strong similarity to the typical palT type-SSO could be detected. This is the first palT type-SSO to be identified from Lactobacillus. Through a series of deletion studies, the minimal replicon of the cloned RR was found to be 2.66 kb in size including the DSO region and rep gene. This RR was further identified as being highly stable in L. reuteri and also bearing a very narrow host-range property, suggesting it to be a good replicon potentially useful in vector construction for developing L. reuteri as a vaccine carrier.     

Characterization of the Replication Region of the Lactobacillus reuteri Plasmid pTC82 Potentially Used in the Construction of Cloning Vector

A 3.2 kb DNA fragment containing the replication region (RR) from pTC82 was cloned, sequenced, and found to contain elements typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR), including double-strand origin (DSO), replication protein gene (rep), and single-strand origin (SSO). The DSO of pTC82 contains two domains showing 55.5% and 84.6% similarities in nucleotide (nt) sequence to the conserved functional elements bind and nic, respectively, which are required for the initiation of the leading strand typical of the pC194-RCR family. Although the predicted rep gene product of pTC82 (Rep82) shares little identity (less than 24%) with other known Reps, a region containing three motifs, characteristic of the pC194-family Reps, was identified, indicating the Rep82 as a novel Rep protein of this family. Downstream of the rep82 gene, strong similarity to the typical palT type-SSO could be detected. This is the first palT type-SSO to be identified from Lactobacillus. Through a series of deletion studies, the minimal replicon of the cloned RR was found to be 2.66 kb in size including the DSO region and rep gene. This RR was further identified as being highly stable in L. reuteri and also bearing a very narrow host-range property, suggesting it to be a good replicon potentially useful in vector construction for developing L. reuteri as a vaccine carrier.     

Regulation of DNA replication by iterons: an interaction between the ori2 and incC regions mediated by RepE-bound iterons inhibits DNA replication of mini-F plasmid in Escherichia coli.

In bacteria, plasmids and some DNA viruses, DNA replication is initiated and regulated by binding of initiator proteins to repetitive sequences. To understand the control mechanism we used the plasmid mini-F, whose copy number is stringently maintained in Escherichia coli, mainly by its initiator protein RepE and the incC region. The monomers of RepE protein bound to incC iterons, which exert incompatibility in trans and control the copy number of mini-F plasmid in cis. Many incompatibility defective mutants carrying mutations in their incC iterons had lost the affinity to bind to RepE, while one mutant retained high level binding affinity. The mutated incC mini-F plasmids lost the function to control the copy number. The copy number of the wild-type mini-F plasmid did not increase in the presence of excess RepE. These results suggested that the control of replication by incC iterons does not rely on their capacity to titrate RepE protein. Using a ligation assay, we found that RepE proteins mediated a cross-link structure between ori2 and incC, for which the dimerization domain of RepE and the structure of incC seem to be important. The structure probably causes inhibition of extra rounds of DNA replication initiation on mini-F plasmids, thereby keeping mini-F plasmid at a low copy number.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

Combinatorial Interactions of Two <Emphasis Type="Italic">cis-</Emphasis>Acting Elements,AT-Rich Regions and HSEs,in the Expression of Tomato <Emphasis Type="Italic">Lehsp23.8</Emphasis> upon Heat and Non-Heat Stresses

We previously cloned and analyzed the 1,893-bp promoter region (−1,915 to −23) of the tomato (Lycopersicon esculentum) Lehsp23.8 gene, whose expression is induced by treatment with high or low temperatures, heavy metal, or abscisic acid (ABA). In our present work, we examined how this expression is regulated. A comprehensive quantitative promoter deletion and base-substitution analysis was conducted under various environmental conditions. The proximal region (−565 to −23 bp) of the Lehsp23.8 promoter harbors cis-regulatory elements that conferred high levels of heat-induced expression in transgenic tobacco. Mutation of the five proximal HSEs (HSE1 to 5) of that promoter led to an absence of heat inducibility. The AT-rich regions between −255 bp and −565 bp (AT-rich1 to 4) in the promoter might serve as enhancers for such heat-induced expression. Deletion and HSE mutation analysis indicated that other cis-acting elements also function in response to low temperature, heavy metal, and ABA and that HSE1 to 5 act at least as cis-acting elements in multiple-stress responses of Lehsp23.8. These results reveal that those five proximal HSEs and AT-rich regions function interdependently in the expression of Lehsp23.8 in response to non-heat stresses. Furthermore, the putative elements CRT/DRE, AP-1, and ABRE in that promoter are not required for multiple-stress induction.     

Replication of ColE2 and ColE3 plasmids In vitro replication dependent on plasmid-coded proteins

Summary We developed an in vitro replication system for ColE2 and ColE3 plasmids using cell extracts prepared from bacteria with or without these plasmids. DNA synthesis depended on host DNA polymerase I and was sensitive to rifampicin and chloramphenicol. Preincubation of the extracts with plasmid DNA, however, allowed replication of template DNA added subsequently in a plasmid-specific manner in the presence of rifampicin and chloramphenicol. The plasmid-specified trans-acting factor(s) was detected in cell extracts from bacteria carrying a recombinant plasmid with the region of ColE2 or ColE3 encoding the Rep protein. The plasmid-specified factor(s) consisted at least in part of protein, probably the Rep protein. In vitro replication started within a region of ColE2 or ColE3 containing the smallest cis-acting segment essential for in vivo replication and proceeded in a fixed direction.     

Genetic analysis of the minimal replicon of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid

Using a combination of mutagenesis with the transposon and polymerase chain reaction subcloning, the essential elements of the replication region of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid have been identified. An open reading frame, coding for a protein with homology to Rep proteins from other Lactococcus plasmids, is essential. This protein is trans-acting and could not be replaced by the Rep protein from another Lactococcus plasmid. A second open reading frame immediately downstream from the first could be removed or inactivated with no apparent effect on plasmid replication. A region containing two 10 by direct repeats and three tandem repeats of a 22 by sequence, immediately upstream of the essential open reading frame, is also essential and probably includes the origin of replication. A 181-bp DNA fragment containing this region was sufficient to allow replication in Lactococcus if the trans-acting protein was provided on another replicon. Single-stranded replication intermediates could not be detected, suggesting that the citrate plasmid uses theta replication rather than rolling-circle replication.     

Genetic Organization of the Basic Replicon of Plasmid pMTH4 of a Facultatively Methylotrophic Bacterium <Emphasis Type="Italic">Paracoccus methylutens</Emphasis> DM12

Two functional regions within the basic replicon of plasmid pMTH4 of Paracoccus methylutens DM12 have been distinguished that are responsible for the replication of the plasmid (REP) and its stabilization (STA). In the REP region, a gene encoding the putative replication initiation protein RepA has been identified, with the highest similarity to the replication protein of plasmid pALC1 (Paracoccus alcaliphilus). The potential origin of replication (oriV), consisting of five long repeated sequences (iterons) as well as putative DnaA and IHF boxes, has been localized in the promoter region of the gene repA. The STA region was found to ensure stability for heterogeneous plasmid pABW3 that is unstable itself in paracocci. The mini-STA region (850 bp) contains two short open reading frames, one of which shows similarity to the RelB protein of Escherichia coli. Our investigations suggest that the stabilizing system of pMTH4 is based on the toxin and antidote principle.     

The Tall Fescue Turf Grass Class I Chitinase Gene <Emphasis Type="Italic">FaChit1</Emphasis> Is Activated by Fungal Elicitors,Dehydration, Ethylene,and Mechanical Wounding

The cDNA, genomic DNA, and promoter sequence of FaChit1, a class I chitinase gene from Festuca arundinacea, were isolated and characterized in the present work. The deduced amino acid sequence of FaChit1 contains the chitin binding, catalytic, and proline and glycine-rich domains characteristic for most class I chitinases, but no C-terminal extension region. FaChit1 is induced effectively by fungal elicitors, dehydration, and ethylene, but only slightly by mechanical wounding. To identify potential stress-related cis-acting elements, 5′ sequences 935, 651, and 233 bp upstream of the FaChit1 start codon were fused to the GUS reporter gene and analyzed in transgenic tobacco. The results indicated that the 935 bp fragment closely mirrored endogenous gene expression and that the 651 bp fragment was sufficient to direct reporter the gene expression in response to fungal elicitors, ethylene, dehydration, or mechanical wounding due to both known and presently uncharacterized cis-acting elements. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.