Combinatorial redesign of the DNA binding specificity of a prokaryotic helix-turn-helix repressor

Redesign of the bacteriophage 434 Cro repressor was accomplished by using an in vivo genetic screening system to identify new variants that specifically bound previously unrecognized DNA sequences. Site-directed, combinatorial mutagenesis of the 434 Cro helix-turn-helix (HTH) motif generated libraries of new variants which were screened for binding to new target sequences. Multiple mutations of 434 Cro that functionally converted wild-type (wt) 434 Cro DNA binding-sequence specificity to that of a lambda bacteriophage-specific repressor were identified. The libraries contained variations within the HTH sequence at only three positions. In vivo and in vitro analysis of several of the identified 434 Cro variants showed that the relatively few changes in the recognition helix of the HTH motif of 434 Cro resulted in specific and tight binding of the target DNA sequences. For the best 434 Cro variant identified, an apparent K(d) for lambda O(R)3 of 1 nM was observed. In competition experiments, this Cro variant was observed to be highly selective. We conclude that functional 434 Cro repressor variants with new DNA binding specificities can be generated from wt 434 Cro by mutating just the recognition helix. Important characteristics of the screening system responsible for the successful identifications are discussed. Application of the techniques presented here may allow the identification of DNA binding protein variants that functionally affect DNA regulatory sequences important in disease and industrial and biotechnological processes.     

Folding propensities of synthetic peptide fragments covering the entire sequence of phage 434 Cro protein.

The phage 434 Cro protein, the N-terminal domain of its repressor (R1-69) and that of phage lambda (lambda6-85) constitute a group of small, monomeric, single-domain folding units consisting of five helices with striking structural similarity. The intrinsic helix stabilities in lambda6-85 have been correlated to its rapid folding behavior, and a residual hydrophobic cluster found in R1-69 in 7 M urea has been proposed as a folding initiation site. To understand the early events in the folding of 434 Cro, and for comparison with R1-69 and lambda6-85, we examined the conformational behavior of five peptides covering the entire 434 Cro sequence in water, 40% (by volume) TFE/water, and 7 M urea solutions using CD and NMR. Each peptide corresponds to a helix and adjacent residues as identified in the native 434 Cro NMR and crystal structures. All are soluble and monomeric in the solution conditions examined except for the peptide corresponding to the 434 Cro helix 4, which has low water solubility. Helix formation is observed for the 434 Cro helix 1 and helix 2 peptides in water, for all the peptides in 40% TFE and for none in 7 M urea. NMR data indicate that the helix limits in the peptides are similar to those in the native protein helices. The number of side-chain NOEs in water and TFE correlates with the helix content, and essentially none are observed in 7 M urea for any peptide, except that for helix 5, where a hydrophobic cluster may be present. The low intrinsic folding propensities of the five helices could account for the observed stability and folding behavior of 434 Cro and is, at least qualitatively, in accord with the results of the recently described diffusion-collision model incorporating intrinsic helix propensities.     

Proposed alpha-helical super-secondary structure associated with protein-dna recognition

Knowledge of the three-dimensional structure of the bacteriophage λ Cro repressor, combined with an analysis of amino acid sequences and DNA coding sequences for this and other proteins that recognize and bind specific base sequences of double-helical DNA, suggests that a portion of the structure of the Cro repressor that is involved in DNA binding also occurs in the Cro protein from bacteriophage 434, the cII protein from bacteriophage λ, the Salmonella phage P22 c2 repressor and the cI repressor from bacteriophage λ. This α-helical super-secondary structure may be a common structural motif in proteins that bind double-helical DNA in a base sequence-specific manner.     

Functional roles of amino acid residues involved in forming the alpha-helix-turn-alpha-helix operator DNA binding motif of Tet repressor from Tn10.

The Tn10 derived Tet repressor contains an amino acid segment with high homology to the alpha-helix-turn-alpha-helix motif (HTH) of other DNA binding proteins. The five most conserved amino acids in HTH are probably involved in structural formation of the motif. Their functional role was probed by saturation mutagenesis yielding 95 single amino acid replacement mutants of Tet repressor. Their binding efficiencies to tet operator were quantitatively determined in vivo. All functional mutants contain amino acid substitutions consistent with their proposed role in a HTH. In particular, only the two smallest amino acids (serine, glycine) can substitute a conserved alanine in the proposed first alpha-helix without loss of activity. The last position of the first alpha-helix, the second position in the turn, and the fourth position in the second alpha-helix require mostly hydrophobic residues. The proposed C-terminus of the first alpha-helix is supported by a more active asparagine compared to glutamine replacement mutant of the wt leucine residue. The turn is located close to the protein surface as indicated by functional lysine and arginine replacements for valine. A glycine residue at the first position in the turn can be replaced by any amino acid yielding mutants with at least residual tet operator affinity. A structural model of the HTH of Tet repressor is presented.     

Operator recognition by the phage 434 cI repressor: MD simulations of free and bound 50-bp DNA reveal important differences between the OR1 and OR2 sites

Using molecular dynamics simulations in explicit solvent, we investigated the behavior of a 50-bp DNA sequence containing the 434 bacteriophage operators OR1 and OR2 separated by an 8-bp spacer. Two simulations of 1 ns each were carried out, with DNA alone and with DNA complexed to dimers of the R1-69 DNA binding domain of the phage 434 cI repressor protein at the OR1 and OR2 sites. Strong correlations among average structural parameters are observed between our simulations and available experimental data for the bound OR1/OR2 subsites. In the free state, some differences appear between the three relevant fragments (OR1, the spacer, and OR2). Unbound OR1 exhibits a large, shallow major groove into which the base atoms protrude and is also bent toward the major groove. This structure is maintained because structural fluctuations are weak. Unbound OR2 resembles canonical B-DNA although the structural parameters show greater fluctuations, essentially due to a malleable step (the innermost CpA/TpG), absent in OR1. Complexation with the proteins slightly alters the base positions but strongly modifies the sugar and backbone motions. The most crucial repressor effects are changes in the flexibility of the OR1/OR2 sites. Structural fluctuations are enhanced for OR1, conferring a favorable energetic contribution to the OR1 binding, whereas they are reduced for OR2. Therefore, both structural and dynamic properties of DNA suggest OR1 is the most attractive site for the repressor, which may explain the different binding association constants observed for the OR1 and OR2 sites. Finally, we also investigated the impact of the protein on the DNA backbone dynamics and find that direct or indirect interactions facilitate the DNA structural variations required for achieving complementarity with the protein.     

Synthesis of nonlinear DNA-binding peptide with binding specificity determinants close to those of 434 Cro-repressor

Design, synthesis and DNA binding activity of a nonlinear 102 residue peptide are reported. The peptide contains four sequence-specific DNA binding domains of 434 Cro protein. These four domains were linked covalently to a symmetrical carboxyterminal crosslinker that contains four arms each ending with an aliphatic aminogroup. From CD studies we have found that in aqueous buffer in the presence of 20% trifluoroethanol the peptide residues assume alpha helical, beta-sheet and random coiled conformations with an alpha helical content of about 16% at room temperature. The alpha helicity is increased up to 40% in the presence of 40% trifluoroethanol. Upon complex formation between the peptide and DNA a change in the peptide conformation takes place which is consistent with an alpha-beta transition in the DNA binding, helix-turn-helix motif of 434 Cro repressor. Evidently residues present in helices alpha(2) and alpha(3) form a beta hairpin which is inserted in the minor DNA groove. The latter inference is supported by our observations that the peptide can displace minor groove binding antibiotic distamycin A from a complex with poly(dA).poly(dT). As revealed from DNase protection studies the peptide exhibits preferences for binding to operator and pseudooperator sites recognized by 434 Cro repressor. It binds strongly to operator sites OR1, OR2 and OR3 and exhibits a greater affinity for pseudooperator site Op1. From analysis of nucleotide sequences in the strong affinity binding sites for the peptide on DNA a conclusion is drawn that it binds to pseudosymmetrical nucleotide sequences 5'-ACAA(W)nCTGT-3', where W is an arbitrary nucleotide. n is equal to six or seven. In the strongest affinity binding site for the peptide on DNA (Op1) motif 5'-ACAA-3' is replaced by sequence 5'-ACCA-3'. A difference in binding specificity shown by the peptide and 434 Cro protein could be attributed to a flexibility of the connecting chains between DNA-binding domains in the peptide molecule as well as to a replacement of Thr - Ala in the alpha 2 helix. Removal of two residues from the N-terminal end of helix alpha 2 in each of the four DNA binding domains of 434 Cro present in the peptide leads to a loss of binding specificity, although the modified peptide binds to DNA unspecifically.     

A Molecular Dynamics Study of the Repressor/Operator(OR1,OR3) Complexes from Bacteriophage 434

We have performed three molecular dynamics simulations using the CHARMM molecular modeling program to study the repressor protein from bacteriophage 434 complexed with DNA operators of two different sequences. Two approaches to the modeling of the solvent were used. In the first method, applied to the R1-69/OR1 truncated complex, water molecules were included explicitly in conjunction with a stochastic boundary force to solvate the complex. In the second approach, used for simulations of the R1-69/OR1 and the R1-69/OR3 complexes, the solvent was omitted and implicitly represented by using a distance-dependent dielectric constant and a scaling of the charges on the exposed residues. The simulation with the model which explicitly includes the solvent serves as a validation of the simulations using a simpler solvent representation. In our discussion of the results we focus upon the important interactions between the DNA binding motif of the 434 repressor (motif helix turn helix) and the operators and how the structures of the complexes change with time.Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1007/s0089460020427     

Prediction of 3-D structure of the Cro protein from phage 434

A comparative model building process has been utilized to predict the three-dimensional structure of the bacteriophage 434 Cro protein. Amino acid sequence similarities between the 434 Cro protein and other bacteriophage repressor and Cro proteins have been used, in conjunction with secondary structure prediction and the known structures of other base sequence specific DNA binding proteins, to derive the model. From this model the interactions between the 434 Cro protein and its operator DNA have been deduced. These proposed interactions are consistent with the known properties of the bacteriophage 434 Cro protein.     

Prediction of 3-D Structure of the Cro Protein from Phage 434

Abstract

A comparative model building process has been utilized to predict (he three-dimensional structure of the bacteriophage 434 Cro protein, Amino acid sequence similarities between the 434 Cro protein and other bacteriophage repressor and Cro proteins have been used, in conjunction with secondary structure prediction and the known structures of other base sequence specific DNA binding proteins, to derive the model. From this model the interactions between the 434 Cro protein and its operator DNA have been deduced. These proposed interactions are consistent with the known properties of the bacteriophage 434 Cro protein.     

Bending of synthetic bacteriophage 434 operators by bacteriophage 434 proteins.

The extent of DNA bending induced by 434 repressor, its amino terminal DNA binding domain (R1-69), and 434 Cro was studied by gel shift assay. The results show that 434 repressor and R1-69 bend DNA to the same extent. 434 Cro-induced DNA bends are similar to those seen with the 434 repressor proteins. On approximately 265 base pair fragments, the cyclic AMP receptor protein of Escherichia coli (CRP) produces larger mobility shifts than does 434 repressor. This indicates that the 434 proteins bend DNA to a much smaller extent than does CRP. The effects of central operator sequence on intrinsic and 434 protein-induced DNA bending was also examined by gel shift assay. Two 434 operators having different central sequences and affinities for 434 proteins display no static bending. The amount of gel shift induced by 434 repressor on these operators is identical, showing that the 434 repressor bends operators with different central sequences to the same extent. Hence, mutations in the central region of the operator do not influence the bent structure of the unbound or bound operator.     

Structure of phage 434 Cro protein at 2.35 A resolution

The crystal structure of phage 434 Cro protein has been determined and refined against 2.35 A data to an R-factor of 19.5%. The protein comprises five alpha-helices and shows the helix-turn-helix motif found in other repressor proteins.     

High Resolution Structural Studies of Cro Repressor Protein and Implications for DNA Recognition

Abstract

Cro repressor is a small dimeric protein that binds to specific sites on the DNA of bacteriophage λ. The structure of Cro has been determined and suggests that the protein binds to its sequence-specific sites with a pair of two-fold related α-helices of the protein located within successive major grooves of the DNA.

From the known three-dimensional structure of the repressor, model building and energy refinement have been used to develop a detailed model for the presumed complex between Cro and DNA. Recognition of specific DNA binding sites appears to occur via multiple hydrogen bonds between amino acid side chains of the protein and base pair atoms exposed within the major groove of DNA. The Cro:DNA model is consistent with the calculated electrostatic potential energy surface of the protein.

From a series of amino acid sequence and gene sequence comparisons, it appears that a number of other DNA-binding proteins have an α-helical DNA-binding region similar to that seen in Cro. The apparent sequence homology includes not only DNA-binding proteins from different bacteriophages, but also gene-regulatory proteins from bacteria and yeast. It has also been found that the conformations of part of the presumed DNA-binding regions of Cro repressor, λ repressor and CAP gene activator proteins are strikingly similar. Taken together, these results strongly suggest that a two-helical structural unit occurs in the DNA-binding region of many proteins that regulate gene expression. However, the results to date do not suggest that there is a simple one-to-one recognition code between amino acids and bases.

Crystals have been obtained of complexes of Cro with six-base-pair and nine-basepair DNA oligomers, and X-ray analysis of these co-crystals is in progress.     

Lac repressor with the helix-turn-helix motif of lambda cro binds to lac operator.

Lac repressor, lambda cro protein and their operator complexes are structurally, biochemically and genetically well analysed. Both proteins contain a helix-turn-helix (HTH) motif which they use to bind specifically to their operators. The DNA sequences 5'-GTGA-3' and 5'-TCAC-3' recognized in palindromic lac operator are the same as in lambda operator but their order is inverted form head to head to tail to tail. Different modes of aggregation of the monomers of the two proteins determine the different arrangements of the HTH motifs. Here we show that the HTH motif of lambda cro protein can replace the HTH motif of Lac repressor without changing its specificity. Such hybrid Lac repressor is unstable. It binds in vitro more weakly than Lac repressor but with the same specificity to ideal lac operator. It does not bind to consensus lambda operator.