A collagen film microassay for tissue collagenase.

A quantitative microassay for the detection of bacterial and tissue collagenase is presented. Collagen in acetic acid solution forms a thin, tenacious film upon contact with a dried agar surface. The digestion of the film by collagenase is detected by subsequent staining with Coomassie blue. Undigested film is stained dark blue while areas of collagenase digestion remain clear. The technique can be employed in two ways: with collagen-coated glass coverslips as a rapid screening method or with collagen-lined capillary tubes for precise quantitation. The assay has a sensitivity comparable to those assays using radioactively labeled collagen substrates and requires only 5 to 60 min of incubation.     

A co-cultured skin model based on cell support membranes

Tissue engineering of skin based on collagen:PCL biocomposites using a designed co-culture system is reported. The collagen:PCL biocomposites having collagen:PCL (w/w) ratios of 1:4, 1:8, and 1:20 have been proven to be biocompatible materials to support both adult normal human epidermal Keratinocyte (NHEK) and mouse 3T3 fibroblast growth in cell culture, respectively, by Dai, Coombes, et al. in 2004. Films of collagen:PCL biocomposites were prepared using non-crosslinking method by impregnation of lyophilized collagen mats with PCL/dichloromethane solutions followed by solvent evaporation. To mimic the dermal/epidermal structure of skin, the 1:20 collagen:PCL biocomposites were selected for a feasibility study of a designed co-culture technique that would subsequently be used for preparing fibroblast/biocomposite/keratinocyte skin models. A 55.3% increase in cell number was measured in the designed co-culture system when fibroblasts were seeded on both sides of a biocomposite film compared with cell culture on one surface of the biocomposite in the feasibility study. The co-culture of human keratinocytes and 3T3 fibroblasts on each side of the membrane was therefore studied using the same co-culture system by growing keratinocytes on the top surface of membrane for 3 days and 3T3 fibroblasts underneath the membrane for 6 days. Scanning electron microscopy (SEM) and immunohistochemistry assay revealed good cell attachment and proliferation of both human keratinocytes and 3T3 fibroblasts with these two types of cells isolated well on each side of the membrane. Using a modified co-culture technique, a co-cultured skin model presenting a confluent epidermal sheet on one side of the biocomposite film and fibroblasts populated on the other side of the film was developed successfully in co-culture system for 28 days under investigations by SEM and immunohistochemistry assay. Thus, the design of a co-culture system based on 1:20 (w/w) collagen:PCL biocomposite membranes for preparation of a bi-layered skin model with differentiated epidermal sheet was proven in principle. The approach to skin modeling reported here may find application in tissue engineering and screening of new pharmaceuticals.     

Structural transition during thermal denaturation of collagen in the solution and film states

Temperature dependent vibrational circular dichroism (VCD) spectra of type I collagen, in solution and film states, have been measured. These spectra obtained for solution sample suggest that the thermal denaturation of collagen results in transition from poly-L-proline II (PPII) to unordered structure. The PPII structure of collagen is identified by the presence of negative VCD couplet in the amide I region, while the formation of unordered structure is indicated by the disappearance of VCD in the amide I region. The temperature dependent spectra obtained for the supported collagen film indicated a biphasic transition, which is believed to be the first vibrational spectroscopic report to support a biphasic transition during thermal denaturation of collagen film. The temperature dependent spectra of collagen films suggest that the thermal stability of collagen structure depends on its state and decreases in the order: supported film > free standing film > solution state. These observations are believed to be significant in the VCD spectroscopic analysis of secondary structures of proteins and peptides.     

Type I collagen structure regulates cell morphology and EGF signaling in primary rat hepatocytes through cAMP-dependent protein kinase A

Adhesion to type 1 collagen elicits different responses dependent on whether the collagen is in fibrillar (gel) or monomeric form (film). Hepatocytes adherent to collagen film spread and proliferate, whereas those adherent to collagen gel remain rounded and growth arrested. To explore the role of potential intracellular inhibitory signals responsible for collagen gel-mediated growth arrest, cAMP-dependent protein kinase A (PKA) was examined in hepatocytes adherent to collagen film or gel. PKA activity was higher in hepatocytes on collagen gel than on film during G1 of the hepatocyte cell cycle. Inhibition of PKA using H89 increased cell spreading on collagen gel in an EGF-dependent manner, whereas activation of PKA using 8-Br-cAMP decreased cell spreading on collagen film. PKA inhibition also restored ERK activation, cyclin D1 expression and G1-S progression on collagen gel, but had no effect on cells adherent to collagen film. Analysis of EGF receptor phosphorylation revealed that adhesion to collagen gel alters tyrosine phosphorylation of the EGF receptor, leading to reduced phosphorylation of tyrosine residue 845, which was increased by inhibition of PKA. These results demonstrate that fibrillar type 1 collagen can actively disrupt cell cycle progression by inhibiting specific signals from the EGF receptor through a PKA-dependent pathway.     

Production of procollagenase by cultured human keratinocytes

Using a collagen film assay utilizing 14C-labeled type I collagen, we demonstrated that cultured human keratinocytes produced a procollagenase after treatment with the tumor-promoting phorbol ester, 12-O-tetradecanoylphorbol-13-acetate (TPA). Production of collagenase paralleled alterations in cellular morphology induced by TPA. When procollagenase was immunoprecipitated with antibody to human fibroblast collagenase and analyzed on sodium dodecyl sulfate-polyacrylamide gels, the zymogen was revealed as a 56- and 51-kDa doublet. The keratinocyte-derived collagenase was a neutral metalloprotease, required activation with trypsin for detection in the collagenase assay and produced the characteristic three-quarter and one-quarter length collagen cleavage products when incubated with type I collagen at 25 degrees C. The enzyme was inhibited by serum and cysteine and was largely unaffected by serine, thiol, and carboxyl protease inhibitors. Cycloheximide inhibited the TPA-induced production of collagenase, suggesting that the procollagenase was not stored preformed in the keratinocytes. Keratinocytes treated with a tumor-promoting analogue of TPA also produced collagenase, but cells treated with cytochalasin B, interleukin-1, or two non-tumor promoting phorbol esters did not. Keratinocyte-derived collagenase may play a role in wound healing and morphogenesis.     

Interaction of cultured skin cells with the polylactide matrix coved with different collagen structural isoforms

These experiments were done to optimize the surface properties of polylactide film designed for human keratinocyte cultivation. The film was covered with type 1 collagen to increase its hydrophilic properties. The method of protein application determines the consistency the matrix coating and the formation of different collagen structures on the film. Substrates modified by collagen affect the growth of cultured keratinocytes. Our data on keratinocyte spreading, morphology and cytoskeleton organization demonstrate that the best form of collagen to use to cover the polymeric surface is the fibrillar isoform.     

The role of collagen structure in mitogen stimulation of ERK,cyclin D1 expression,and G1-S progression in rat hepatocytes

Adhesion to type 1 collagen can elicit different cellular responses dependent upon whether the collagen is in a fibrillar form (gel) or monomeric form (film). Hepatocytes adherent to collagen film spread extensively, express cyclin D1, and increase DNA synthesis in response to epidermal growth factor, whereas hepatocytes adherent to collagen gel have increased differentiated function, but lower DNA synthesis. The signaling mechanisms by which different forms of type I collagen modulate cell cycle progression are unknown. When ERK MAP kinase activation was analyzed in hepatocytes attached to collagen film, two peaks of ERK activity were demonstrated. Only the second peak, which correlated with an increase of cyclin D1, was required for G1-S progression. Notably, this second peak of ERK activity was absent in cells adherent to collagen gel, but not required in the presence of exogenous cyclin D1. Expression of activated mutants of the Ras/Raf/MEK signaling pathway in cells adherent to collagen gel restored ERK phosphorylation and DNA synthesis, but differentially affected cell shape. Although Ras, Raf, and MEK all increased expression of cyclin D1 on collagen film, only Ras and Raf significantly up-regulated cyclin D1 levels on collagen gel. These results demonstrate that adhesion to polymerized collagen induces growth arrest by inhibiting the Ras/ERK-signaling pathway to cyclin D1 required in late G1.     

High-throughput quantification of hydroxyproline for determination of collagen

An accurate and high-throughput assay for collagen is essential for collagen research and development of collagen products. Hydroxyproline is routinely assayed to provide a measurement for collagen quantification. The time required for sample preparation using acid hydrolysis and neutralization prior to assay is what limits the current method for determining hydroxyproline. This work describes the conditions of alkali hydrolysis that, when combined with the colorimetric assay defined by Woessner, provide a high-throughput, accurate method for the measurement of hydroxyproline.     

Novel method for measuring active tension generation by C2C12 myotube using UV‐crosslinked collagen film

We have developed a novel method for measuring active tension generated by cultured myotubes using UV‐crosslinked collagen film. Skeletal myoblasts cell line C2C12 or human primary skeletal myoblasts were seeded onto a thin (35 µm) collagen film strip, on which they proliferated and upon induction of differentiation they formed multinucleated myotubes. The collagen film–myotube complex contracted upon electric pulse stimulation which could be observed by light microscope. When collagen film–myotube complex were attached to force transducer, active tension generation was observed upon electric pulse stimulation. Measurement of active tension was possible for multiple times for more than 1 month with the same batch of collagen film–myotube complex. Active tension generation capability of C2C12 myotubes increased with progression of differentiation, reaching maximal value 6 days after induction of differentiation. Using this method, we measured the effect of artificial exercise induced by electric pulse on active tension generation capability of C2C12 myotubes. When the electric pulses of 1 Hz were continuously applied to induce artificial exercise, the active tension augmentation was observed. After 1 week of artificial exercise, the active tension reached ～10× of that before the exercise. The increased active tension is attributable to the formation of the sarcomere structure within the myotubes and an increased amount of myotubes on the collagen film. The increased amount of myotubes is possibly due to the suppressed atrophy of myotubes by enhanced expression of Bcl‐2. Biotechnol. Bioeng. 2010; 106: 482–489. © 2010 Wiley Periodicals, Inc.     

Thermal helix-coil transition in UV irradiated collagen from rat tail tendon

The thermal helix-coil transition in UV irradiated collagen solution, collagen film and pieces of rat tail tendon (RTT) were compared. Their thermal stability’s were determined by differential scanning calorimeter (DSC) and by viscometric measurements. The denaturation temperatures of collagen solution, film and pieces of RTT were different. The helix-coil transition occur near 40°C in collagen solution, near 112°C in collagen film, and near 101°C in pieces of RTT. After UV irradiation the thermal helix-coil transition of collagen samples were changed. These changes depend on the degree of hydratation.     

Improvement of the physical properties of pepsin-solubilized elastin-collagen film by crosslinking

Pepsin-solubilized elastin (PSE)-conjugated collagen film was prepared from a collagen matrix with PSE by drying it and crosslinking the constituents with water-soluble carbodiimide or microbial transglutaminase to improve the physical properties of the collagen film. The crosslinking reduced the solubility and improved the thermal stability, the thermal transition properties, and the elasticity of the control film in water. In particular, water-soluble carbodiimide strongly influenced these properties. The PSE-conjugated collagen film showed good permeation by water-soluble tasting substances such as oligosaccharides and amino acids, but poor permeation by polysaccharide, protein, and hydrophobic substances such as retinol and cholesterol.     

DNA immobilized onto an acyl-azide derivative of collagen membranes for use as immunoadsorbent

Single- and double-stranded DNA were immobilized on films of highly polymerized collagen by a covalent process. The coupling was efficient at an acidic pH with an optimum at pH 5, while preventing the collagen film from any damage. In addition, no leakage occurred, so it was possible to use this DNA-coated collagen film as an immunoadsorbent. Therefore the findings reported here suggest that the acyl-azide procedure is also suitable for DNA binding on a proteinic support. Promising results in specific clearance of DNA antibodies were obtained in vitro.     

Differences in Caco-2 cell attachment, migration on collagen and fibronectin coated polyelectrolyte surfaces

Metastasis mechanisms depend on cell metabolism changes, migration and adhesion to different tissues. To understand their choice of interaction site, the tumoral cell adhesion to model surfaces was studied. The response of Caco-2 tumoral cells cultured on polyelectrolyte film-functionalized surfaces with or without adhesion proteins (fibronectin or collagen IV) was analyzed. Using the layer-by- layer method, multilayer films were prepared with cationic poly(allylamine hydrochloride) and anionic poly(sodium 4-styrenesulfonate) polyelectrolytes. Film surface wettability was evaluated. The electrochemical impedance spectroscopy analyses were carried out to control the elaborated surfaces on which Caco-2 tumoral cells were cultured. The cell velocity was studied by video-microscopy and a cell colorimetric assay (WST-1) was used to quantify cell viability. The film surface parameters as well as the protein nature and localization in the film were found to modulate cell response. Results demonstrated that the cancer cell motility and proliferation were higher when cultured onto pure collagen located above the polyelectrolyte film and that the reverse surprisingly was observed when proteins were inserted into the polyelectrolyte film. Data also showed that cell motility was correlated with a high charge transfer resistance (Rct) and a low surface free energy (SFE) polar component (electron donor character). This relationship was valid only for pure external proteins. Thus, fibronectin exhibited a low Rct and a high SFE polar component, which decreased cell motility and proliferation.     

In Vitro Orientation of Fibroblasts and Myoblasts on Aligned Collagen Film

A collagen film in which the collagen fibers were aligned was prepared and characterized by scanning electron microscopy. Cell orientation on this film was studied in vitro using human fibroblasts and chick embryo myoblasts. Ninety-four percent of innoculated fibroblasts were aligned along the direction of the collagen fiber. The cell orientation was disturbed when cytochalasin B or colchicine was added to the culture medium. The myoblasts showed a similar alignment along the direction of collagen fiber. The scanning electron microscopic observation revealed that none of the cytoplasmic extensions had consistent relationships to the direction of collagen fiber. Myoblast fusion was accelerated on the aligned membrane as compared to a randomly oriented film, suggesting some role of contact guidance in muscle cell differentiation.     

96-well plate-based method for total collagen analysis of cell cultures

Total collagen assays are often laborious and use large quantities of consumables. We have developed a new method of assaying total 3H-proline-labeled collagen from cultured cells. Cells and media are harvested from 96-well plates directly onto fiberglass filtermats and counted in the Wallac 1205 flat-bed scintillation counter (BetaPlate). The assay was validated by comparison with a traditional total collagen assay. The resulting assay provides a rapid one-step method for quantifying collagen synthesis, which, unlike many collagen assays, does not require extensive dialysis or precipitation of proteins.     

Resveratrol and Celastrol Loaded Collagen Dental Implants Regulate Periodontal Ligament Fibroblast Growth and Osteoclastogenesis of Bone Marrow Macrophages

Collagen is widely used for dental therapy in several ways such as films, 3D matrix, and composites, besides traditional Chinese medicine (TCM), has been used in tissue regeneration and wound healing application for centuries. Hence, the present study was targeted for the first time to fabricate collagen film with TCM such as resveratrol and celastrol in order to investigate the human periodontal ligament fibroblasts (HPLF) growth and bone marrow macrophages (BMM) derived osteoclastogenesis. Further, the physicochemical, mechanical and biological activities of collagen‐TCM films crosslinked by glycerol and EDC‐NHS (1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide‐N‐hydroxysulfosuccinimide) were investigated. Collagen film characterization was significantly regulated by the nature of plasticizers like hydrophobic and degree of polarity. Interestingly, the collagen film's denaturation temperature was increased by EDC‐NHS than glycerol. FT‐IR data confirmed the functional group changes due to chemical interaction of collagen with TCM. Morphological changes of HPLF cells cultured in control and collagen films were observed by SEM. Importantly, the addition of resveratrol upregulated the proliferation of HPLF cells, while osteoclastogenesis of BMM cells treated with mCSF‐RANKL was significantly downregulated by celastrol. Accordingly, the collagen‐TCM film could be an interesting material for dental regeneration, and especially it is a therapeutic target to restrain the elevated bone resorption during osteoporosis.     

Development of cell-based immunoassays to measure type I collagen in cultured fibroblasts

Excessive deposition of type I collagen by activated fibroblasts is a hallmark of scarring and fibrotic pathologies. Quantitation of collagen I at the protein level is paramount to measure functionally relevant changes during pathological remodeling of the extracellular matrix. We describe two new cell-based assays to directly quantify the amount of collagen I incorporated into the extracellular matrix of primary human lung fibroblasts. Utilizing a monoclonal antibody specific to native human collagen I, we optimized conditions and parameters including incubation time, specificity and cell density to demonstrate dose-dependent induction of collagen I by transforming growth factor beta, as measured by in-cell enzyme linked immunosorbent assay. The results obtained by this assay were mimicked by an “In situ Quantitative Western Blot” on cultured cells using the same antibody. Results from these assays were comparable to those obtained with a commercial assay for collagen I N-propeptide, which is an index of collagen formation. These assays have been optimized for a 96-well format and provide a novel and useful approach for screening of anti-fibrotic agents in vitro. The assays described here also offer a significant improvement in throughput and specificity over conventional methods that primarily measure soluble collagen.     

A nonradioactive assay for type IV collagen degradation

A sensitive assay for type IV collagen degradation using an avidin-biotin sandwich technique is described. Biotinylated type IV collagen is allowed to bind to an avidin-coated microtiter plate. The solution to be assayed is incubated with the biotinylated collagen bound to the avidin plate. Collagen degraded by the solution is released into the supernatant and transferred to a second plate coated with avidin. By addition of biotinylated horseradish peroxidase to this second plate, the amount of collagen degraded is determined. Our assay requires only 0.5 microgram of type IV collagen per microtiter plate and detects nanogram quantities of bacterial collagenase activity.     

Monitoring of collagen and collagen fragments in chromatography of protein mixtures

A new method for the detection of collagen and collagen peptides in the presence of other proteins is described. The procedure is based on alkaline hydrolysis of the proteins and monitoring of the free hydroxyproline after chromophore formation. The method is quick and sensitive and the color yield of hydroxyproline is not affected by chromatography solvents. As all steps of the assay take place in a single test tube the method is suitable for batch processing of column fractions. Due to the high sensitivity of the assay it can be used for the analysis of collagen and collagen peptides in extracts of small tissue samples or biopsies.     

The matrix form of collagen and basal microporosity influence basal lamina deposition and laminin synthesis/secretion by stratified human keratinocytes in vitro

Summary The ability of the collagen matrix form to support the formation of a basal lamina by cultured normal human epidermal keratinocytes (NHEK) was determined using transmission electron microscopy. The collagen matrix forms tested in this study were a) a dry type I collagen film and b) a type I collagen gel. NHEK were grown for 14 days on the following five different substrates: plain plastic culture dishes without the addition of collagen (PP); plain plastic culture dishes overlaid with a dry, aldehyde-crosslinked type I collagen film (DCF-P); plain plastic culture dishes overlaid with an aldehyde-crosslinked type I collagen gel (GEL-P); Millipore Millicell CM microporous membranes overlaid with a dry, aldehyde-crosslinked type I collagen film (DCF-CM); and Millipore Millicell CM microporous membranes overlaid with an aldehyde-crosslinked type I collagen gel (GEL-CM). NHEK maintained for 2 wk on PP and DCF-P were unable to secrete a basal lamina. NHEK grown for 2 wk on the GEL-P and GEL-CM substrates, however, secreted a contiguous basal lamina at the GEL-NHEK interface. To determine if the appearance of this basal lamina correlated with laminin synthesis, laminin was immunoprecipitated from cellular extracts, as well as media from the apical and basal chambers. NHEK grown on the GEL-P substrate synthesized more laminin than did NHEK grown on the other four alternative substrates. In addition, NHEK grown on GEL-CM were able to direct more laminin to the basal compartment than NHEK grown on DCF-CM substrates. Taken together, the data indicate that the matrix form of collagen can influence basal lamina deposition, laminin synthesis, and laminin trafficking in NHEK.