Green fluorescent carbon dots for sensing of quercetin and pH and cell imaging

Green fluorescent carbon dots (G-CDs) were fabricated from Coptis chinensis directly via one-step hydrothermal treatment for the determination of quercetin (QCT) and pH sensing. The obtained G-CDs have low cytotoxicity, good photostability and excellent water solubility. The optimal excitation wavelength and emission wavelength were 480 and 530 nm. A remarkable emission reduction displayed when QCT was added to the G-CDs and the linear detection range is 0–200 μM, the limit of detection is 4.41 nM. The proposed method was applied to the determination of QCT in Haerbin beer products with satisfactory successful recovery. Furthermore, the G-CDs exhibited sensitive changes to pH and two fluorescent pH sensors in the linear ranges of 2.0–6.0 and 6.0–11.0 were constructed based on this. They also provide a feasible method to measure the pH value of real water samples. Importantly, the fluorescent sensor has been extended to detect QCT in yeast cell, demonstrating the G-CDs present potential biosensing application prospect.     

Long pepper (Piper longum) derived carbon dots as fluorescent sensing probe for sensitive detection of Sudan I

In this piece of work, microwave-assisted conversion of a natural precursor in to high-valued nano-scale material was carried out by a completely greener method. The fluorescent carbon dots prepared, designated as long pepper derived carbon dots (LPCDs), have been thoroughly characterized to explore the physical and chemical properties. The system exhibits excitation dependent emission behavior and from the optimal studies the excitation and emission wavelength of the system was found to be 330 nm and 455 nm respectively. On account of the superior fluorescent behavior of the LPCDs, it was successfully employed as a fluorescent sensing probe to detect Sudan I with good level of selectivity and sensitivity. This carcinogenic dye extensively used as food adulterant can impart several health issues. Food product safety is of high concern, therefore a simple facile and economical analytical method was proposed based on the fluorescence of LPCDs for this dye detection with satisfactory statistical parameters. A linear relationship was maintained in the range of 0 to 27.27 μM Sudan I with limit of detection of 0.92 μM. The quenching mechanism was studied and finally attributed to Förster resonance energy transfer (FRET) mechanism. In addition, the probe was effectively implemented for Sudan I detection in commercial chili powder samples with good level of recovery parameters.     

Sensor heavy metal from natural resources for a green environment: A review relation between synthesis method and luminescence properties of carbon dots

Carbon dots (CDs) are 10-nm nanomaterial classes as excellent candidates in various applications: physics, biology, chemistry, and food science due to high stable biocompatibility and high surface expansive. CDs produced from natural materials have received wide attention due to their unique benefits, easy availabilities, sufficient costs, and harmless to the ecosystem. The various properties of CDs can be obtained from various synthesis methods: hydrothermal, microwave-assisted, and pyrolysis. The CDs have shown enormous potential in metal particle detection, colorimetric sensors, electrochemical sensors, and pesticide sensors. This review provides systematic information on a synthesis method based on natural resources and the application to the environmental sensors for supporting the clean environment. We hope this review will be useful as a reference source in providing the guidance or roadmap for new researchers to develop new strategies in increasing luminescence properties CDs for multi detection of heavy metals in the environment.     

Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.     

The synthesis of N-doped carbon dots for visual differentiating and detection of tetracyclines

N-doped carbon dots (N-CDs) were synthesized from L -glutamine and triethanolamine using a one-step hydrothermal method. The N-CDs emitting blue fluorescence had selective responses to tetracyclines (TCs) and could be used as a fluorescent probe to realize the quantitative detection and qualitative analysis of TCs. A method for the determination of TCs using the N-CDs in actual samples was successfully established. The recovery rate was maintained at 97.50–105.60%, and the relative standard deviation (RSD) was less than 3%. In addition, TCs can be visually distinguished using filter paper by the different fluorescence colours (light green, dark blue, and yellow-green) of the N-CDs/TCs system under ultraviolet light. This study provides a relatively simple method to detect and identify TCs.     

One-step hydrothermal preparation of chiral carbon quantum dots and enantioselective sensing of glutamine enantiomeric isomers

A novel method for chiral identification of glutamine enantiomers based on chiral carbon quantum dots (cCQDs) fluorescent probes. cCQDs were prepared using a one-step hydrothermal method with L-tryptophan as the carbon source and chiral source, producing spherical nanoparticles exhibiting a blue colour luminescence. The fluorescence intensity (F) of cCQDs was enhanced or quenched following the addition of chiral enantiomeric glutamine (L/D-Gln), and therefore cCQDs, as a fluorescence probe, could be used for enantioselective sensing of the L/D-Gln. The fluorescence enhancement value (∆F_E) exhibited good linearity with L-Gln concentration in the range 0.23–10.00 mM, and the limit of detection was 0.14 mM. The fluorescence quenching value (∆F_Q) showed a good linear relationship with D-Gln concentration in the range 0.29–10.00 mM, and the detection limit was 0.18 mM. The mechanism of fluorescence enhancement/quenching was explored by molecular modelling and the type of quenching. The method was applied to the determination of L-Gln content in real samples, and the recovery rate was satisfactory. This study provided a novel approach for the synthesis of cCQDs and the recognition of amino acid enantiomers.     

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2+

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺. Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇/F₅₉₀ and the concentration of Hg²⁺. The detection range was 10–70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.     

Fabrication of nitrogen‐ and phosphorous‐doped carbon dots by the pyrolysis method for iodide and iron(III) sensing

A facile and novel strategy to synthesize nitrogen‐ and phosphorous‐doped carbon dots (NPCDs) by single step pyrolysis method is described here. Citric acid is used as carbon source and di‐ammonium hydrogen phosphate is used as both nitrogen and phosphorous sources, respectively. Through the extensive study on optical properties, morphology and chemical structures of the synthesized NPCDs, it is found that as‐synthesized NPCDs exhibited good excitation‐dependent luminescence property, spherical morphology and high stability. The obtained NPCDs are stable in aqueous medium and possess a quantum yield of 10.58%. In this work, a new assay method is developed to detect iodide ions using the synthesized NPCDs. Here, the inner filter effect is applied to detect the iodide ion and exhibited a wide linear response concentration range (10–60 μM) with a limit of detection (LOD) of 0.32 μM. Furthermore, the synthesized NPCDs are used for the selective detection of iron(III) (Fe³⁺) ions and cell imaging. Fe³⁺ ions sensing assay shows a detection range from 0.2 to 30 μM with a LOD of 72 nM. As an efficient photoluminescence sensor, the developed NPCDs have an excellent biocompatibility and low cytotoxicity, allowing Fe³⁺ ion detection in HeLa cells.     

A ratiometric fluorescence strategy based on copper nanoclusters/carbon dots for sensitive detection of doxorubicin

Sensitive detection of doxorubicin (DOX) is critical for clinical theranostics. A novel ratiometric fluorescence strategy based on the inner filter effect (IFE) has been established for the sensitive detection of DOX by designing a ratiometric fluorescence probe. In the presence of DOX, the fluorescence intensity of copper nanoclusters (CuNCs) at 485 nm decreases, and the fluorescence intensity of carbon dots at 560 nm increases. Therefore, DOX can be quantitatively detected by measuring the ratio of the fluorescence intensities at 560 and 485 nm (F₅₆₀/F₄₈₅). The F₅₆₀/F₄₈₅ ratio exhibits a linear correlation with the DOX concentration in the range from 1.0 × 10⁻⁸ M to 1.0 × 10⁻⁴ M with the detection limit of 3.7 nM. Furthermore, this method was also successfully applied to the analysis of DOX in human plasma samples, affording an effective platform for drug safety management.     

黄土区次生植被恢复对土壤有机碳官能团的影响

以植被空间排列顺序推断时间演替顺序,采用同步辐射软X射线探讨子午岭林区典型植物样地白羊草(Bothriochlor ischaemum)狼牙刺(Sophora viciifolia)辽东栋群落(Quercus liaotungensis)演替过程中土壤有机碳官能团变化。图谱定性分析显示,恢复过程中各植被条件下0-5 cm和20-40 cm土层土壤脂肪-C、酮-C吸收强度明显增加;0-5 cm土层土壤脂肪-C吸收较20-40 cm强,而土壤酮-C吸收较20-40 cm弱。半定量分析结果显示,随植被演替进程,0-5 cm土层土壤各官能团相对百分含量都有所增加,如芳香-C、脂肪-C、酮-C呈现逐渐增加趋势,至辽东栎群落时,20-40 cm土层土壤脂肪-C相对百分含量明显增加。植被恢复过程中,各样地SOC官能团组成基本一致,但植被恢复影响土壤SOC官能团数量变化;植被恢复能促进0-5 cm和20-40 cm土层土壤脂肪-C、酮-C含量增加,并且这种作用随着植被恢复时间的延长逐渐增强,说明植被演替增强了土壤有机碳化学稳定性。     

Detection of Indigo Carmine dye in juices via application of photoluminescent europium-doped carbon dots from tannic acid

Indigo Carmine is a hazardous dye and produces an allergic action for humans despite the excessive use of the dye in several industrial fields. A sensitive and simple fluorescent assay for determining Indigo Carmine relying on quenching of the fluorescent europium-doped carbon dots by the action of inner filter effect was developed. This sensing platform involved the preparation of europium-doped carbon dots from the hydrothermal carbonization of tannic acid and europium chloride, which was used as fluorescent reagent with a distinctive excitation/emission wavelength at 307/340 nm. Both excitation and emission fluorescence of prepared carbon dots can be successfully quenched by adding Indigo Carmine dye. The developed spectrofluorimetric method exhibits good linearity with the concentration of Indigo Carmine dye in the range of 1.5 to 10.0 μg/ml and provided a limit of detection (LOD) value of 0.40 μg/ml. Furthermore, the prepared carbon nanoparticles were identified and characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR), and ultraviolet (UV)-spectrophotometer techniques. In addition, the developed detecting approach was applied to determine Indigo Carmine in juice samples with acceptable recovery.     

Determination of lead(II) in food samples using a functionalized paper-based fluorescent sensor modified by carbon dots

This work discusses surface modification of cellulose paper specimens for compatibility with nitrogen and sulfur co-doped carbon dots (NSCDs) for lead ion sensing. The interaction of carbon dots (CDs) and cellulose fibers was investigated using silane or chitosan-modified cellulose papers. It was found that modified papers could reduce undesirable redistribution of CDs, during paper drying. Also, only chitosan-modified filter paper was suitable for the successful immobilization of NSCDs. The effect of paper type, chitosan amount, pH, and NSCDs concentration was also studied, and a Whatman No. 42 filter paper modified with chitosan (1% w/v), pH 8.0, and an NSCD concentration of 2.5 g L⁻¹ being selected for further studies. The sensor exhibited high selectivity for lead(II) compared with other metal ions because lead(II) resulted in the most significant changes in the emitted light intensity. Variations in NSCDs fluorescence were measured using a fluorescence imaging system. The NSCDs-paper sensor showed a linear relationship between mean fluorescence intensity and lead(II) in the concentration range of 5.00–1.25 × 10² μmol L⁻¹ with a correlation coefficient (R²) of 0.9988 and a detection limit of 4.50 μmol L⁻¹. The suggested method showed satisfying results for lead(II) determination in different samples as a fast and low-cost approach with on-site application.     

Metal ion-mediated carbon dot nanoprobe for fluorescent turn-on sensing of N-acetyl-l-cysteine

In this work, carbon dots (CDs) was easily synthesized from aspartic acid through a pyrolysis method. Based on their favourable fluorescence properties, CDs were utilized to design a metal ion-mediated fluorescent probe for N-acetyl-l -cysteine (NAC) detection. The fluorescence intensity of CDs was firstly quenched by manganese ions (Mn²⁺) through static quenching effect and subsequently restored by NAC via the combination with Mn²⁺ due to the coordination effect. Therefore, the fluorescent turn-on sensing of NAC was actuated based on the fluorescence quenching stimulated by Mn²⁺ and recovery induced by coordination. The fluorescence recovery efficiencies showed a proportional range to the concentration of NAC in the range 0.04–5 mmol L⁻¹ and the detection limit was 0.03 mmol L⁻¹. Furthermore, this metal ion-mediated fluorescent nanoprobe was applied to human urine sample detection and the standard recovery rates were located in the range 97.62–102.34%. This was the first time that Mn²⁺ was used to construct a fluorescent nanoprobe for NAC. Compared with other heavy metal ions, Mn²⁺ with good biosecurity prevented the risk of application, which made the nanoprobe green and biopractical. The facile synthesis of CDs and novel metal ion-mediated sensing mode made it a promising method for pharmaceutical analysis.     

Assay of ceftazidime and cefepime based on fluorescence quenching of carbon quantum dots

A novel and sensitive method for the determination of ceftazidime and cefepime in an active pharmaceutical ingredient (API) has been developed based on the fluorescence quenching of poly(ethylene glycol) (PEG)2000‐capped carbon quantum dots (CQDs) prepared using a chemical oxidation method. The quenching of fluorescence intensity is proportional to the concentration of ceftazidime and cefepime over the range of 0.33–3.30 and 0.24–2.40 µg/mL, respectively. The mode of interaction between PEG2000‐capped CQDs and ceftazidime/cefepime in aqueous solutions was investigated using a fluorescence, UV/Vis and Fourier transform infrared spectrometry (FTIR) at physiological pH. UV/Vis and FTIR spectra demonstrated that ground state compounds were formed through hydrophobic interaction the fluorescence quenching of CQDs caused by ceftazidime and cefepime. The quenching constants decreased with increases in temperature, which was consistent with static quenching. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of carbon quantum dots based on starch and their spectral properties

A simple method for the synthesis of water‐soluble carbon quantum dots (CQDs) has been developed based on chemical oxidation of starch. The structures and optical properties of the CQDs were characterized by ultraviolet–visible (UV–Vis) spectroscopy, photoluminescence spectroscopy (PL) and transmission electron microscopy. The CQDs were found to emit bright blue fluorescence and disperse uniformly. The effects of ambient temperature, light and pH on the properties of CQDs were studied. The CQDs exhibited good chemical stability, good photostability and pH sensitivity. Furthermore, the interaction between CQDs and bovine serum albumin (BSA) was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Fe-doped MOF-derived N-rich porous carbon nanoframe for H2S cataluminescence sensing

Metal-doped porous carbon matrix composites are considered as outstanding H₂S cataluminescence sensing materials for their good sulfur tolerance and high cataluminescence activity. In this work, an Fe-doped MOF-derived N-rich porous carbon nanoframe was successfully fabricated using the pyrolysis of Fe-doped ZIF-8 in an Ar atmosphere at a temperature of 900°C, and used for H₂S cataluminescence sensing. Along with zinc volatilization, the obtained porous carbon nanoframe not only had high specific surface area and abundant voids, but also had well dispersed Fe species doped in the skeleton. Compared with Fe₂O₃/ZnO composites derived from the same precursor but different pyrolysis terms, this as-prepared Fe-doped N-rich porous carbon presented a three times increase in the cataluminescence intensity towards H₂S, attributed to the porous carbon skeleton that is indispensable for dispersing catalytic active sites and providing more absorptive surface and voids. Comparably, this proposed sensor demonstrated high sensitivity and good selectivity, with the detection range of 1.57–19.58 μg·ml⁻¹ and detection limit of 0.13 μg·ml⁻¹ towards H₂S. This work may provide a new pathway for preparing catalysts for cataluminescence sensing with better metal distribution, higher specific surface area, and richer pores than ever before.     

Potentialities of fluorescent carbon nanomaterials as sensor for food analysis

Food safety and quality are among the most significant and prevalent research areas worldwide. The fabrication of appropriate technical procedures or devices for the recognition of hazardous features in foods is essential to safeguard food materials. In the recent era, developing high-performance sensors based on carbon nanomaterial for food safety investigation has made noteworthy progress. Hence this review briefly highlights the different detection approaches (colorimetric sensor, fluorescence sensor, surface-enhanced Raman scattering, surface plasmon resonance, chemiluminescence, and electroluminescence), functional carbon nanomaterials with various dimensions (quantum dots, graphene quantum dots) and detection mechanisms. Further, this review emphasizes the assimilation of carbon nanomaterials with optical sensors to identify multiple contaminants in food products. The insights of carbon-based nanomaterials optical sensors for pesticides and insecticides, toxic metals, antibiotics, microorganisms, and mycotoxins detection are described in detail. Finally, the opportunities and future perspectives of nanomaterials-based optical analytical approaches for detecting various food contaminants are discussed.     

Highly luminescent nitrogen‐doped carbon dots for simultaneous determination of chlortetracycline and sulfasalazine

Here, we have presented a green and facile strategy to fabricate nitrogen‐doped carbon dots (N‐CDs) and their applications for determination of chlortetracycline (CTC) and sulfasalazine (SSZ). The fluorescent N‐CDs, prepared by one‐step hydrothermal reaction of citric acid and l ‐arginine, manifested numerous excellent features containing strong blue fluorescence, good water‐solubility, narrow size distribution, and a high fluorescence quantum yield (QY) of 38.8%. Based on the fluorescence quenching effects, the as‐synthesized N‐CDs as a fluorescent nanosensor exhibited superior analytical performances for quantifying CTC and SSZ. The linear range for CTC was calculated to be from 0.85 to 20.38 μg ml^?1 with a low detection limit of 0.078 μg ml^?1. Meanwhile, the linear range for SSZ was estimated to be from 0.34 to 6.76 μg ml^?1 with a low detection limit of 0.032 μg ml^?1. Therefore, the N‐CDs hold admirable application potential for constructing a fluorescent sensor for pharmaceutical analysis.     

中国天然林资源保护工程温室气体排放及净固碳能力

基于天然林资源保护工程(简称天保工程)一期(2000—2010年)营造林过程工程边界内碳排放和边界外碳泄漏的计算,分析了天保工程及各区域碳排放和碳泄漏年际变化及影响因素,对比了天保工程及各区域碳排放和碳泄漏的组成特征,研究了天保工程及各区域净固碳量的变化特征。结果表明:天保工程一期西北、中西部地区、南部地区、东北地区和天保工程的碳排放分别为0.89、1.47、0.09、2.45 Tg C;碳泄漏分别为3.17、3.11、6.50、12.78 Tg C。工程措施和碳排放强度的区域性差异导致各区域碳排放组成特征不同。造林及配套森林基础设施建设是西北、中西部地区和南部地区最大的工程措施碳排放;新造林及森林管护是东北地区最大的工程措施碳排放。相应地,各种物资消耗中,建材是西北、中西部地区和南部地区最大的物资碳排放;燃油是东北地区最大的物资碳排放。天保工程在工程边界内外引起的额外温室气体排放量达到15.23 Tg C,抵消了工程固碳效益的9.82%;在西北、中西部地区、南部地区和东北地区的抵消作用分别为10.08%、8.16%和11.24%。天保工程一期净固碳量为139.77 Tg C,年均净固碳量为12.71 Tg C/a。因此,碳排放和碳泄漏对天保工程固碳的抵消较小,工程一期在我国温室气体减排和减缓全球气候变暖上做出了巨大贡献。避免工程基础设施的盲目建设和对工程进行合理规划是减少温室气体排放的可能途径。     

The preparation of ethylenediamine‐modified fluorescent carbon dots and their use in imaging of cells

In this work, fluorescent carbon dots (CDs) were synthesized using a hydrothermal method with glucose as the carbon source and were surface‐modified with ethylenediamine. The properties of as‐prepared CDs were analyzed by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), ultraviolet–visible light (UV/vis) absorption and fluorescent spectra. Furthermore, CDs conjugated with mouse anti‐(human carcinoembryonic antigen) (CEA) monoclonal antibody were successful employed in the biolabeling and fluorescent imaging of human gastric carcinoma cells. In addition, the cytotoxicity of CDs was also tested using human gastric carcinoma cells. There was no apparent cytotoxicity on human gastric carcinoma cells. These results suggest the potential application of the as‐prepared CDs in bioimaging and related fields. Copyright © 2015 John Wiley & Sons, Ltd.