Immobilization of glucose isomerase to ion-exchange materials

Glucose isomerase (D -xylose ketol-isomerase EC 5.3.1.5) from Bacillus Coagulans was partially purified and immobilized by adsorption to anion exchangers. The highest activities were obtained when the enzyme was adsorbed to DEAE-cellulose. On immobilization to DEAE-cellulose the measured optimum pH value for enzyme activity shifted from 7.2 to 6.8. There was no appreciable difference between the heat stabilities of soluble and immobilized enzyme. The K_{m app} values for the immobilized enzyme were found to be 0.25M in the presence of 0.01M Mg²⁺ and 0.19M with 0.005M Mg²⁺, while those enzyme were 0.11 and 0.17M, re spectively. Under conditions of contimuous of D -glucose, a decrease of activity with time was observed, but this decrease was less at a low Mg²⁺ concentration and was affected by column geometry. There were no appreciable diffusional limitation effects in packed-bed columns.     

Immobilization of pectinase fromSclerotium rolfsii

Immobilization of pectinase fromS. rolfsii was studied on different matrices of which Amberlite XAD-7 showed maximum adsorption and expression of the enzyme. The most active preparation was obtained when XAD-7 was activated with 2% glutaraldehyde and 1.7 μkat of enzyme per g resin was used for immobilization at pH 5.5 and 28°C. Optimum pH and temperature of theS. rolfsii pectinase remain unaltered, 3.5 and 55°C, respectively, after immobilization. However, the apparentK _M value of the enzyme decreased from 1.75 g/L for soluble enzyme preparation to 1.4 g/L for immobilized enzyme preparation. Both soluble and immobilized enzyme preparations were most stable at pH 4.0. The immobilized enzyme preparation was more stable than the soluble enzyme.     

Production of high-fructose syrup by a heat-fixed Lactobacillus sp.

A Lactobacillus sp. isolated from soil and capable of growing on xylose-containing medium exhibited high glucose isomerase activity. The enzyme was thermostable, stable toward dialysis, and activated by heat treatment. It did not show the presence of xylose or ribose isomerase activities; the K_m for glucose and xylose substrates were 0.48M and 0.513M, respectively. The heat treatment of ultrasonic crude extract gave insoluble fixed active glucose isomerase enzyme. The properties of free and immobilized enzyme in heat-fixed whole cells differed in many respects. The optimum temperature for enzyme activity changed from 70 to 85°C, the optimum substrate concentration changed from 1.0M to 2.4M, and the optimum pH from 7.4 to 6.0. Co²⁺ and Mg²⁺ ions activated the enzyme when used singly, but in combination they inhibited the enzyme and Mn²⁺ had no effect on the enzyme. Free and immobilized enzymes, when used in the used in the conversions of corn and bagasse hydrolysates to fructose, gave 58, 25.6%, and 50, 27.6% conversions, respectively. Immobilized enzyme retained a significant activity for more than 30 hr and was able to operate at higher glucose concentrations showing less products inhibition effect as compared to free enzyme. In the batch process it was able to operate for about eight cycles.     

Adsorption of peroxidase on Celite 545 directly from ammonium sulfate fractionated white radish (Raphanus sativus) proteins

This paper demonstrates the direct immobilization of peroxidase from ammonium sulfate fractionated white radish proteins on an inorganic support, Celite 545. The adsorbed peroxidase was crosslinked by using glutaraldehyde. The activity yield for white radish peroxidase was adsorbed on Celite 545 was 70% and this activity was decreased and remained 60% of the initial activity after crosslinking by glutaraldehyde. The pH and temperature-optima for both soluble and immobilized peroxidase was at pH 5.5 and 40°C. Immobilized peroxidase retained higher stability against heat and water-miscible organic solvents. In the presence of 5.0 mM mercuric chloride, immobilized white radish peroxidase retained 41% of its initial activity while the free enzyme lost 93% activity. Soluble enzyme lost 61% of its initial activity while immobilized peroxidase retained 86% of the original activity when exposed to 0.02 mM sodium azide for 1 h. The K_m values were 0.056 and 0.07 mM for free and immobilized enzyme, respectively. Immobilized white radish peroxidase exhibited lower V_max as compared to the soluble enzyme. Immobilized peroxidase preparation showed better storage stability as compared to its soluble counterpart.     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Yeast alcohol dehydrogenase immobilized in a glutaraldehyde–albumin matrix: Kinetics and cofactor diffusional effects*

This study was carried out to define how the overall rate of reaction would be influenced by different degrees of diffusional resistance to cofactor transport within an oxidoreductase membrane matrix. To accomplish this, 0.7–6.6μM yeast alcohol dehydrogenase was immobilized in an albumin matrix crosslinked with 2.5 or 5.0% glutaraldehyde to give 102–1685 μM thick membranes. The enzyme half-life was at least doubled at pH 7.5 or 8.8 on immobilization. Values of the kinetic constants for the soluble and immobilized enzyme were determined at 25°C and pH 8.8 over the range of 0.01–1.0M bulk solution concentration of ethanol as substrate and 140–1000μM bulk solution concentration of nicotinamide adenine dinucleotide (NAD⁺) as cofactor, to give essentially single substrate kinetics in NAD⁺. Equilibrium partitioning of ethanol and NAD⁺ between the solution and membrane was measured and used in the data analysis. The four kinetic constants for the soluble enzyme agreed with literature values; and all increased with immobilization of the enzyme. The Michaelis constants for NAD⁺ and for ethanol were greater for the immobilized enzyme. The diffusional resistance to NAD⁺ transport, presented in terms of the Thiele modulus, showed that the overall rate of reaction was decreased by about 50% even at values of the modulus as low as 2.0.     

Development of Bed Reactor Using Brick Dust Immobilized CIVI-Cellulase from Seeds of Cowpea (Vigna sinensis L)

Cellulase extracted from seeds of Cowpea (Vigna sinensis L var VITA-4) was partially purified and immobilized on brick dust as solid support via glutaraldehyde. The percentage retention of the enzyme activity on brick dust was nearly 85%. After immobilization specific activity of the enzyme increased from 0.275 to 0.557 U mg^?1 protein with about 2 fold enrichment. The optimum pH and temperature of soluble enzyme were determined as pH 4.6 and WC, respectively whereas immobilized enzyme showed at pH 5.0 and 37°C, respectively. The V_max values for soluble and immobilized enzyme were determined as 6.67 and 1.25 mg min^?1, respectively whereas K_m values were 4.35 and 4.76 mg ml^?1, respectively. The immobilized enzyme displayed higher thermal stability than soluble enzyme and retained about 50% of its initial activity after 12 reuses. Immobilized enzyme was packed in an indigenously designed double walled glass bed reactor for continuous production of reducing sugars.     

Purification, Immobilization, and Some Properties of Glucose Isomerase from Streptomyces flavogriseus

Glucose isomerase (EC 5.3.1.5) produced from Streptomyces flavogriseus was purified by fractionation with (NH₄)₂SO₄ and chromatography on diethylaminoethyl (DEAE)-cellulose and DEAE-Sephadex A-50 columns. The purified enzyme was homogeneous as shown by ultracentrifugation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Benzyl DEAE-cellulose, triethylaminoethyl-cellulose, and DEAE-cellulose were effective in the immobilization of partially purified glucose isomerase. Several differences in properties were found between purified soluble enzyme, immobilized enzyme (DEAE-cellulose-glucose isomerase), and heat-treated whole cells. Glucose and xylose served as substrate for the enzyme. Whole cells had the highest K_m values for glucose and xylose; the soluble enzyme had the lowest values. The optimum temperature for activity of the soluble and immobilized enzymes was 70°C; that for whole cells was 75°C. The pH optimum for the three enzyme preparations was 7.5. Magnesium ion or Co²⁺ was required for enzyme activity; an addition effect resulted from the presence of both Mg²⁺ and Co²⁺. The enzyme activity was inhibited by Hg²⁺, Ag⁺, or Cu²⁺. The conversion ratio of the enzyme for isomerization was about 50%. The soluble and immobilized enzymes showed a greater heat stability than whole cells. The soluble enzyme was stable over a slightly wider pH (5.0 to 9.0) range than the immobilized enzyme and whole cells (pH 5.5 to 9.0). The molecular weight of the enzyme determined by the sedimentation equilibrium method was 171,000. A tetrameric structure for the enzyme was also indicated. After operating at 70°C for 5 days, the remaining enzyme activity of the immobilized enzyme and whole cells, which were used for the continuous isomerization of glucose in a plug-flow type of column in the presence of Mg²⁺ and Co²⁺, was 75 and 55%, respectively. Elimination of Co²⁺ decreased operational stability.     

Immobilization in the presence of Triton X-100: modifications in activity and thermostability of <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis> CCR11 lipase

A partially purified lipase produced by the thermophile Geobacillus thermoleovorans CCR11 was immobilized by adsorption on porous polypropylene (Accurel EP-100) in the presence and absence of 0.1% Triton X-100. Lipase production was induced in a 2.5% high oleic safflower oil medium and the enzyme was partially purified by diafiltration (co. 500,000 Da). Immobilization conditions were established at 25 °C, pH 6, and a protein concentration of 0.9 mg/mL in the presence and absence of 0.1% Triton X-100. Immobilization increased enzyme thermostability but there was no change in neither the optimum pH nor in pH resistance irrelevant to the presence of the detergent during immobilization. Immobilization with or without Triton X-100 allowed the reuse of the lipase preparation for 11 and 8 cycles, respectively. There was a significant difference between residual activity of immobilized and soluble enzyme after 36 days of storage at 4 °C (P < 0.05). With respect to chain length specificity, the immobilized lipase showed less activity over short chain esters than the soluble lipase. The immobilized lipase showed good resistance to desorption with phosphate buffer and NaCl; minor loses with detergents were observed (less than 50% with Triton X-100 and Tween-80), but activity was completely lost with SDS. Immobilization of G. thermoleovorans CCR11 lipase in porous polypropylene is a simple and easy method to obtain a biocatalyst with increased stability, improved performance, with the possibility for re-use, and therefore an interesting potential use in commercial conditions.     

A novel nanobiosensor for the detection of paraoxon using chitosan-embedded organophosphorus hydrolase immobilized on Au nanoparticles

Organophosphorus (OP) compounds are one of the most hazardous chemicals used as insecticides/pesticide in agricultural practices. A large variety of OP compounds are hydrolyzed by organophosphorus hydrolases (OPH; EC 3.1.8.1). Therefore, OPHs are among the most suitable candidates that could be used in designing enzyme-based sensors for detecting OP compounds. In this work, a novel nanobiosensor for the detection of paraoxon was designed and fabricated. More specifically, OPH was covalently embedded onto chitosan and the enzyme–chitosan bioconjugate was then immobilized on negatively charged gold nanoparticles (AuNPs) electrostatically. The enzyme was immobilized on AuNPs without chitosan as well, to compare the two systems in terms of detection limit and enzyme stability under different pH and temperature conditions. Coumarin 1, a competitive inhibitor of the enzyme, was used as a fluorogenic probe. The emission of coumarin 1 was effectively quenched by the immobilized Au-NPs when bound to the developed nanobioconjugates. However, in the presence of paraoxon, coumarin 1 left the nanobioconjugate, leading to enhanced fluorescence intensity. Moreover, compared to the immobilized enzyme without chitosan, the chitosan-immobilized enzyme was found to possess decreased K_m value by more than 50%, and increased V_max and K_cat values by around 15% and 74%, respectively. Higher stability within a wider range of pH (2–12) and temperature (25–90°C) was also achieved. The method worked in the 0 to 1050?nM concentration ranges, and had a detection limit as low as 5?×?10^?11 M.     

Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

Immobilization of soybean seed coat peroxidase on polyaniline: Synthesis optimization and catalytic properties

Soybean seed coat peroxidase (SBP) was immobilized on various polyaniline-based polymers (PANI), activated with glutaraldehyde. The most reduced polymer (PANIG₂) showed the highest immobilization capacity (8.2 mg SBP?g^?1 PANIG₂). The optimum pH for immobilization was 6.0 and the maximum retention was achieved after a 6-h reaction period. The efficiency of enzyme activity retention was 82%. When stored at 4°C, the immobilized enzyme retained 80% of its activity for 15 weeks as evidenced by tests performed at 2-week intervals. The immobilized SBP showed the same pH-activity profile as that of the free SBP for pyrogallol oxidation but the optimum temperature (55°C) was 10°C below that of the free enzyme. Kinetic analysis show that the K_m was conserved while the specific V_max dropped from 14.6 to 11.4 µmol min^?1 µg^?1, in agreement with the immobilization efficiency. Substrate specificity was practically the same for both enzymes. Immobilized SBP showed a greatly improved tolerance to different organic solvents; while free SBP lost around 90% of its activity at a 50% organic solvent concentration, immobilized SBP underwent only 30% inactivation at a concentration of 70% acetonitrile. Taking into account that immobilized HRP loses more than 40% of its activity at a 20% organic solvent concentration, immobilized SBP performed much better than its widely used counterpart HRP.     

Immobilization of oxyreductases on inorganic supports based on alumina. Immobilization of lactate dehydrogenase on alumina by adsorption

Lactate dehydrogenase (LDH) was adsorbed on low-(γ, η) and high -(θ, α) temperature forms of alumina. θ-Al₂O₃ exhibited the greatest adsorption ability. The maximum adsorption value was 30 mg LDH/g of a carrier. The conditions for irreversible adsorption have been determined. An adsorption isotherm on θ-Al₂O₃ for pH 6.0 has been obtained; the LDH_ads surface area and the carrier surface portion accessible to the enzyme molecules have been calculated. The reaction kinetic parameter were determined by taking into account the reaction proceeding in the intradiffusional region. The specific catalytic activity (A_spec) of LDH_ads at small surface coverage of θ-Al₂O₃ is five times less than A_spec of the native enzyme and K_M^imm with respect to NADH exceeds K_M^nat by two orders or magnitude. The is evidence for a strong LDH–Al₂O₃ interaction and a considerable deformation of the enzyme globule. A_spec and K_M decrease as the amount of the enzyme attached to the carrier increases. Due to adsorption. LDH becomes thermostable and durable. The LDH_ads samples conserve 20–40% of their activity at room temperature during a year.     

Immobilization of Candida rugosa lipase by cross-linking with glutaraldehyde followed by entrapment in alginate beads

Candida rugosa lipase was immobilized by first cross-linking with glutaraldehyde and then entrapping in calcium alginate beads. The presence of 2-propanol during cross-linking markedly improved the enzyme activity and activity recovery. Maximal enzyme activity (2.1?mmol?h^?1?g^?1 immobilized conjugate, wet weight) and activity recovery (117%) were observed at 30% (v/v) 2-propanol for hydrolysis of olive oil, which were 1.7 and 2.0 times higher than those of the immobilized enzyme prepared in the absence of 2-propanol. The half-life of the immobilized lipase prepared by entrapment after cross-linking in 30% 2-propanol was 1.6 times higher than that prepared by entrapment of the native lipase without cross-linking and 2-propanol pretreatment. The enantioselectivity of the former was 11 times higher than that of the latter for hydrolysis of racemic ketoprofen ethyl ester.     

The potential of immobilized bacterial α-amylase on coconut coir,a smart carrier for biocatalysts

Purified α-amylase from a soil bacterium Bacillus sp. SKB4 was immobilized on coconut coir, an inexpensive cellulosic fiber, with the cross-linking agent glutaraldehyde. The catalytic properties and stability of the immobilized enzyme were compared with those of its soluble form. The enzyme retained 97.2% of its activity and its catalytic properties were not drastically altered after immobilization. The pH optimum and stability of the immobilized enzyme were shifted towards the alkaline range compared to the free enzyme. The optimum temperature for enzymatic activity was 90°C in both forms of the enzyme. The soluble and immobilized enzyme retained 19% and 70% of original activity, respectively, after pre-incubation for 1 h at 90°C. Immobilized amylase was less susceptible to attack by heavy metal ions and showed higher K_m and V_max values than its free form. The bound enzyme showed significant activity and stability after 6 months of storage at 4°C. All of these characteristics make the new carrier system suitable for use in the bioprocess and food industries.     

Microplate assay for aptamer-based thrombin detection using a DNA-enzyme conjugate based on histidine-tag chemistry

We report a method to prepare a DNA–enzyme conjugate using histidine-tag (His-tag) chemistry. A DNA oligonucleotide was modified with nitrilotriacetate (NTA), whose K_d was approximately 10^?6 (M^?1) toward a His-tag present on a recombinant protein via the complexation of Ni²⁺. His-tagged alkaline phosphatase (His-AP) was used as the model enzyme. Enzyme immobilization on the microplate revealed the conjugation of His-AP and the NTA-modified DNA via an Ni²⁺ complex. SPR measurements also proved the conjugation of His-AP with the NTA-modified DNA via an Ni²⁺ complex. The DNA–enzyme conjugate was then used for the detection of thrombin using a DNA aptamer. The DNA-AP conjugate successfully amplified the binding signal between the DNA aptamer and the thrombin, and the signal was measured as the fluorescent intensity derived from the AP-catalyzed reaction. The detection limit was 11 nM. Finally, we studied the effect of the release of the immobilized His-AP from the microplate on the AP activity, because the present strategy used a cleavable linker for the conjugation and the enzyme immobilization. The DNase-catalyzed release of the immobilized His-AP resulted in a 1.7-fold higher AP activity than observed when the His-AP was surface-immobilized.     

Immobilization of lipase onto a photo-crosslinked polymer network: Characterization and polymerization applications

Abstract

The recovery of activity of lipases immobilized onto a photo-crosslinked polymer network was 76.0% and 41.0% for entrapment and adsorption methods, respectively. Both entrapped and adsorbed immobilized enzymes were very stable, retaining more than 60% of their activity over the range of temperatures studied. Immobilization by either method protected their relative activities nearly 96% at 70°C. The optimum pH was 8.0 for immobilized enzymes and 6.0 for the free enzyme at 40°C, while the relative activities after storage at 0–4°C for 30 days were 98% and 75% using entrapment and adsorption methods, respectively. These results indicated that lipase immobilized by entrapment and adsorption not only had good activity recovery, but also remarkable stability, better reusability and application adaptability than free lipase. Also, it can be safely stated that, photo-crosslinked polymer network can be used as alternative supports for immobilization of lipase for enzymatic polymerization reactions. In the ring-opening polymerization of ?-caprolactone, polymerization rates were clearly affected as monomer conversions were 58% and 49% and the highest molecular weights (M_n) obtained were 7890 and 5600 gmol^{? 1} for entrapment and adsorption methods, respectively.     

A novel method for immobilization of invertase from the thermophilic fungus, Thermomyces lanuginosus

An invertase from the thermophilic fungus, Thermomyces lanuginosus was immobilized on phenyl-Sepharose and its properties were studied. Between the soluble and immobilized forms of the invertase, there were not much difference in their optimum pH, K _M and V _max for sucrose. In contrast, the K _M and V _max for raffinose changed significantly. The optimum temperature for the immobilized invertase was lower by 10 C. The immobilized invertase showed remarkable stability at 50 C and was less sensitive to inhibition by metal ions. There was no leaching of the enzyme for at least a month when stored in the refrigerator. The method is novel and specific for the thermophilic invertase as a mesophilic invertase (from yeast) did not bind to phenyl-Sepharose.     

Kinetic and microstructural characterization of immobilized penicillin acylase from Streptomyces lavendulae on Sepabeads EC-EP

Recombinant penicillin acylase from Streptomyces lavendulae was covalently bound to epoxy-activated Sepabeads EC-EP303®. Optimization of the immobilization process led to a homogeneous distribution of the enzyme on the support surface avoiding the attachment of enzyme aggregates, as shown by confocal electron microscopy. The optimal immobilized biocatalyst had a specific enzymatic activity of 26.2IUgwetcarrier^?1 in the hydrolysis of penicillin V at pH 8.0 and 40°C. This biocatalyst showed the highest activity at pH 8.5 and 65°C, 1.5 pH units lower and 5°C higher than its soluble counterpart. Substrate specificity of the derivative also showed its ability to efficiently hydrolyze other natural aliphatic penicillins such as penicillins K, F and dihydroF. The immobilized enzyme was highly stable at 40°C and pH 8.0 (t_1/2=625 h vs. t_1/2=397 h for the soluble enzyme), and it could be recycled for at least 30 consecutive batch reactions without loss of catalytic activity.     

Cobra venom phospholipase A2 immobilized to porocus glass beads.

Phospholipase A₂ (EC 3.1.1.4) from cobra venom (Naja naja naja) has been covalently immobilized to aryl amine porous glass beads by diazo coupling. The attachment of the enzyme to the glass beads is apparently through tyrosine. The activity of the immobilized enzyme toward phospholipid substrate has been monitored using the Triton X-100/phospholipid mixed micelle assay system. The activity of the immobilized phospholipase A₂ toward phosphatidylcholine is about 160 μmol min^?1 ml^?1 of glass beads, and the specific activity is about 13 μmol min^?1 mg^?1 of protein in this assay system. The pH rate profile and apparent pK_a in 10 mm Ca²⁺ of the immobilized enzyme parallels that of the soluble enzyme. The substrate specificity of the immobilized enzyme toward individual phospholipid species in mixed micelles is phosphatidylcholine ? phosphatidylethanolamine. In binary lipid mixtures in mixed micelles containing phosphatidylcholine and phosphatidylethanolamine together, a reversal in specificity is observed, and phosphatidylethanolamine is the preferred substrate. This unusual specificity reversal in binary mixtures is also observed for the soluble enzyme. The activity of the immobilized enzyme toward phospholipid inserted in mixed micelles is the same as toward a synthetic phospholipid which forms monomers, while a 20-fold decrease in activity toward monomeric substrate is observed for the soluble enzyme. The immobilized enzyme is stable at temperatures of 90 °C as is the soluble enzyme. However, p-bromphenacyl bromide, a reagent which inactivates the soluble enzyme, does not inactivate the immobilized enzyme. The immobilized enzyme can be stored frozen for several months and is reusable. The mechanism of action of immobilized phospholipase A₂ from cobra venom and the potential usefullness of the bound enzyme as a probe for phospholipids in surfaces of membranes is considered.