Synthesis and evaluation of polymeric continuous bed (monolithic) reversed-phase gradient stationary phases for capillary liquid chromatography and capillary electrochromatography

There is a demand of novel high resolution separation media for separation of complex mixtures, particularly biological samples. One of the most flexible techniques for development of new separation media currently is synthesis of the continuous bed (monolithic) stationary phases. In this study the capillary format gradient stationary phases were formed using continuous bed (monolith) polymerization in situ. Different reversed-phase stationary phase gradients were tailored and their resolution using capillary liquid chromatography and capillary electrochromatography at isocratic mobile phase conditions was evaluated. It is demonstrated, that efficiency and resolution of the gradient stationary phases can be substantially increased comparing to the common (isotropic) stationary phases. The proposed formation approach of the gradient stationary phase is reproducible and compatible with the capillary format or microchip format separations. It can be easily automated for the separation optimizations or mass production of the capillary columns or chips.     

Abnormal protein patterns in blood serum and cerebrospinal fluid detected by capillary electrophoresis

Capillary zone electrophoresis and high-resolution agarose gel electrophoresis were compared to detect protein components in serum and cerebrospinal fluid of patients. Both electrophoretic methods proved to be useful for detection of protein abnormalities (e.g., mono- and oligoclonal bands) in biological fluids, but capillary electrophoresis offered several important advantages, such as sample application without preliminary concentration, lack of staining procedures, and on-line evaluation of patterns. Furthermore, capillary electrophoresis exhibits shorter analysis time and high resolution with low baseline noise. The results were proven to be powerful in diagnosis and monitoring of dyscrasias in routine laboratory practice.     

Synthesis and evaluation of polymeric continuous bed (monolithic) reversed-phase gradient stationary phases for capillary liquid chromatography and capillary electrochromatography

There is a demand of novel high resolution separation media for separation of complex mixtures, particularly biological samples. One of the most flexible techniques for development of new separation media currently is synthesis of the continuous bed (monolithic) stationary phases. In this study the capillary format gradient stationary phases were formed using continuous bed (monolith) polymerization in situ. Different reversed-phase stationary phase gradients were tailored and their resolution using capillary liquid chromatography and capillary electrochromatography at isocratic mobile phase conditions was evaluated. It is demonstrated, that efficiency and resolution of the gradient stationary phases can be substantially increased comparing to the common (isotropic) stationary phases. The proposed formation approach of the gradient stationary phase is reproducible and compatible with the capillary format or microchip format separations. It can be easily automated for the separation optimizations or mass production of the capillary columns or chips.     

Preparation and evaluation of bovine serum albumin immobilized chiral monolithic column for affinity capillary electrochromatography

A system of capillary silica monolith with bovine serum albumin (BSA) functionalized through two approaches for affinity monolithic capillary electrochromatography (AMCEC) was developed. Covalent immobilization conditions for two different Schiff base methods, which employed 3-glycidopropyl trimethoxysilane (GPTS) and 3-aminopropyl trimethoxysilane (APTS) as starting materials, respectively, were investigated to obtain good and stable chiral separation. The BSA immobilized silica monoliths were evaluated in terms of morphology, electroosmotic flow, retention time, column efficiency and resolution of model compound (±)-tryptophan. The columns exhibited satisfactory run-to-run, column-to-column repeatability and maintained their enantioselectivity for more than 3 months. Both developed methods can baseline separate tryptophan enantiomers, whereas shorter retention time, better column efficiency, and enantiomeric recognition between two pairs of drug enantiomers (pantoprazole and atenolol) were obtained by the GPTS method.     

High-throughput sequencing of core STR loci for forensic genetic investigations using the Roche Genome Sequencer FLX platform

The analysis and profiling of short tandem repeat (STR) loci is routinely used in forensic genetics. Current methods to investigate STR loci, including PCR-based standard fragment analyses and capillary electrophoresis, only provide amplicon lengths that are used to estimate the number of STR repeat units. These methods do not allow for the full resolution of STR base composition that sequencing approaches could provide. Here we present an STR profiling method based on the use of the Roche Genome Sequencer (GS) FLX to simultaneously sequence multiple core STR loci. Using this method in combination with a bioinformatic tool designed specifically to analyze sequence lengths and frequencies, we found that GS FLX STR sequence data are comparable to conventional capillary electrophoresis-based STR typing. Furthermore, we found DNA base substitutions and repeat sequence variations that would not have been identified using conventional STR typing.     

Simultaneous resolution of underivatized regioisomers and stereoisomers of arachidonate epoxides by capillary electrophoresis

cis-Epoxyeicosatrienoic acids (EETs) and their hydrolysis products (threo-DHETs) have been proposed to be endothelial-dependent hyperpolarizing factors (EDHFs) which upregulate blood flow when tissue perfusion is impaired. Various EET regioisomers and enantiomers are formed from arachidonate by inducible cytochrome P450 epoxygenase isoforms, and tissue EET profiles may vary with diet, time, and disease. Because EET actions and metabolism may be regio- and stereospecific, convenient methods to measure profiles of EET isomers in tissues are needed. In the current studies, we describe two simple capillary electrophoretic methods for resolving EETs. The first method involves capillary electrophoresis with a mixture of neutral and anionic beta-cyclodextrins, which in one step baseline-resolves underivatized EET regioisomers and their enantiomers. Low picogram amounts of EET enantiomers were identified based on migration times and UV spectra. The method was also used to assess the antipode purity of EET standards, and to determine murine hepatic levels of EET enantiomers. The second method involves capillary electrochromatography, which also baseline-resolves underivatized EET and DHET regioisomers in one step. We conclude that in EET assays the major advantages of capillary electrophoresis over reversed-phase HPLC are improved peak efficiency, sensitivity, and resolution, plus precise coelution of deuterated and nondeuterated EETs.     

Enantiomeric separation of β‐blockers and tryptophan using heparin as stationary and pseudostationary phases in capillary electrophoresis

The separation methods of the enantiomers of two β‐blockers and tryptophan were studied using capillary electrochromatography with heparin covalently as well as non‐covalently, bonded onto the capillary inner wall as stationary phase and electrokinetic chromatography with heparin as pseudostationary phase. In the case of heparin, used as a stationary phase, the method was unable to resolve enantiomers in both cases β‐blockers and tryptophan. On the other hand, when heparin was used as a pseudostationary phase, the resolution of the enantiomers was obtained only with 3‐aminopropyltriethoxysilane which were immobilised onto the inner phase of the capillary. The results of this study let us infer that the electrostatic, hydrophobic, and steric interactions were involved in the separation mechanisms. The separation was achieved in less than 10 minutes under the optimized conditions: 30 mM phosphate buffer (pH 2.5) with the adding of 15 mg/mL of heparin at 15°C and 10 kV. The usefulness of heparin as a chiral selector both in electrokinetic chromatography using 3‐aminopropyltriethoxysilane attached to the capillary was demonstrated for the first time. The developed method was powerful, sensitive, and fast, and it could be considered an important alternative to conventional methods used for chiral separation.     

Macromolecule-ligand binding studied by the Hummel and Dreyer method: current state of the methodology

The use of the Hummel and Dreyer method to measure binding parameters of ligand-macromolecule associations is reviewed. The possibility to determine the number of binding sites and their association constants, even in the case of low affinity, and to control the free ligand concentration as an independent variable are the main advantages of the method. The conditions of the validity are rapid equilibrium kinetics, independence between ligand binding and macromolecule association, and identical retention rates between free and bound macromolecules. Initially developed on soft gels, the method has been applied to high-performance chromatography and capillary zone electrophoresis. Technical progress such as increase in resolution, detection sensitivity, and automation have improved its utilization. The binding parameters given by the Hummel and Dreyer method are in general similar to those obtained by other techniques, in comparable experimental conditions (equilibrium dialysis, ultrafiltration, frontal elution, vacancy peak method, vacancy affinity capillary electrophoresis, retention analysis, affinity chromatography and affinity capillary electrophoresis, physical methods). The choice between these methods is directed by material availability and practical constraints. Separation by new types of chromatographic columns or by capillary zone electrophoresis would enable the study of the simultaneous binding of different drugs on the same macromolecule and their competition.     

Comparison of different techniques for the analysis of metallothionein isoforms by capillary electrophoresis

We have investigated free-solution capillary electrophoresis (FSCE) and micellar electrokinetic capillary chromatography (MECC) separations of metallothionein (MT) isoforms conducted in uncoated and surface-modified fused-silica capillaries. At alkaline pH, FSCE rapidly resolves isoforms belonging to the MT-1 and MT-2 charge classes. At acidic pH, additional resolution of MT isoforms is achieved. The use of high-ionic-strength (0.5 M) phosphate buffers can result in high peak efficiencies and increased resolution for some MT isoforms. Interior capillary surface coatings such as polyamine and linear polyacrylamide polymers permit separation of MT isoforms with enhanced resolution through their effects on electroosmotic flow (EOF) and protein-wall interactions. Improvements in MT isoform resolution can also be achieved by MECC using 100 mM borate buffer pH 8.4 containing 75 mM SDS. Deproteinization of tissue cytosol samples with acetonitrile (60–80%) or perchloric acid (7%) produces extracts that can be subjected to direct analysis of MT by FSCE or MECC. We conclude that optimal separation of MT isoforms by capillary electrophoresis (CE) can be achieved with the appropriate combination of different capillaries, buffers and sample preparation techniques.     

Separation and enantiomer determination ofOPA-derivatised amino acids by using capillary zone electrophoresis

Summary Amino acids react with OPA and chiral mercaptans to give diastereomeric isoindole derivatives. The resolution of these diastereomers was investigated by micellar electrokinetic chromatography (MECC) and free solution capillary electrophoresis. MECC with SDS as micellar phase allows to separate the amino acid derivatives and to resolve the diastereomers. The separation is influenced by the amount of detergent and the organic modifier added. Capillary zone electrophoresis offers a valuable alternative to the traditional methods for amino acid analysis and enantiomer determination.     

Validation of non-aqueous capillary electrophoresis for simultaneous determination of four tricyclic antidepressants in pharmaceutical formulations and plasma samples

We present the validation of a method using non-aqueous capillary electrophoresis (NACE) for quantitative analysis of four tricyclic antidepressants (TADs) in pharmaceutical formulations and plasma. The method presented high resolution allowing the separation of the TADs in 4.3 min at optimized conditions: 50 mM ammonium acetate, 1 M acetic acid in acetonitrile, capillary with 48 cm in length, 40 cm to the detector, and voltage of 30 kV. Acceptable precision (relative standard deviation R.S.D.14.1% from plasma samples) and linearity were achieved using the internal standard (IS) method. The limits of quantification determined for plasma, after liquid-liquid extraction (LLE), were between 30 and 50 ng ml-1. These values are beyond the plasmatic therapeutic concentration. Our results were found comparable or better than those described in the literature for high performance liquid chromatography (HPLC)-based methods.     

Oligonucleotide analysis by gel capillary electrophoresis

Several million oligonucleotides are synthesized each year for a broad variety of molecular biology applications. Steady improvements in the synthesis chemistry efficiency and the automated DNA synthesizers have made production of oligonucleotides routine and reliable. Many applications, such as PCR and sequencing, are often successful when the primers have not been rigorously purified. To ensure an adequate level of quality and purity, rapid and convenient analytical methods are necessary for the dozens of oligonucleotides produced each day by a DNA synthesis laboratory. Traditional methods of analysis have been HPLC and polyacrylamide slab tel electrophoresis (PAGE). Gel capillary electrophoresis is a new option, combining the advantages of the HPLC and PAGE, with unprecedented resolution and speed.     

A rapid capillary gel electrophoresis method for the quantitative determination of RuBisCo in spinach

A capillary gel electrophoretic (CGE) method for the quantitative analysis of RuBisCo in spinach leaves was developed. RuBisCo was resolved into large and small subunits in the presence of sodium dodecyl sulphate (SDS) by the CGE procedure which enabled the determination of the molecular weight of each unit accurately; the values so determined were in close agreement with those reported using other methods. Advantages of CGE over SDS-polyacrylamide gel electrophoresis and high-pressure gel filtration include decreased sample preparation and analysis time, superior resolution and greater sensitivity permitting reduced sample size and trace analysis. In addition, CGE provided precise quantification of RuBisCo and was demonstrated to be a viable alternative to other available methods of protein analysis.     

Cell sampling and analysis (SiCSA): metabolites measured at single cell resolution

By using a fine oil-filled glass microcapillary mounted on a micromanipulator, the solutes of individual plant cells can be sampled. These samples can then be analysed using a range of physical and chemical methods. Hydrostatic pressure (cell pressure probe), osmotic pressure (picolitre osmometer), organic solutes (enzyme-linked fluorescence microscope spectrometry or capillary electrophoresis), inorganic solutes (X-ray microdroplet analysis or capillary electrophoresis), (14)C (mass spectrometry), proteins (microdroplet immunoblotting), and mRNA (rt PCR) have been measured. Collectively, the battery of techniques is called single cell sampling and analysis (SiCSA) and all of the techniques have relevance to the study of plant metabolism at the resolution of the individual cell. This review summarizes the techniques for SiCSA and presents examples of applications used in this laboratory, in particular those relating to cell metabolism.     

Improvement in the method of sample stacking for gravity injection in capillary zone electrophoresis.

A method that allows capillary electrophoresis to be used as a microconcentrating technique is presented. An 85-fold improvement in the amount of material that can be injected into a capillary column without loss of resolution is shown. The method can be used for negative- and positive-charged species but it cannot be used for both species simultaneously.     

Glass capillary or fused-silica gas chromatography—mass spectrometry of several monosaccharides and related sugars: Improved resolution

The gas chromatographic separation of several monosaccharides and related sugars derivatized by methoxylation and trimethylsilylation reactions was optimized with glass capillary (SP-2250) and fused silica (SP-2100) columns. Individual sugars included aldoses, ketoses, polyols, acidic forms and N-acetylated amino sugars. Peaks were detected by selected ion monitoring (SIM). The fused silica column gave complete resolution of all peaks (two per hexose and one per hexitol) arising from glucose, galactose, mannose, fructose, sorbitol, mannitol and dulcitol. The resolution of these sugars with the glass capillary column was not as good, but full differentiation was possible on the basis of SIM. Because the fused silica column gave a better resolution of 33 sugars tested and was more easily installed than the glass capillary column, it was utilized for quantitative analysis. A deuterated algal sugar mixture used for quantitation by isotope dilution was found to contain glucose, galactose, mannose, xylose, arabinose, ribose and rhamnose. Full recoveries were obtained of various amounts of glucose, galactose, mannose, fructose and xylose added to human serum.     

Separation and quantitation of azimilide and its putative metabolites by capillary electrophoresis

Reliable methods based on capillary electrophoresis (CE) have been developed for the separation and quantitation of azimilide, an antiarrhythmic drug under development at Procter & Gamble Pharmaceuticals (P&GP). Both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MECC) were employed in the separation of azimilide from its impurities, degradants and/or metabolites. Separation of azimilide from NE-11178, F-410, F-1054 and F-1292 was obtained by MECC at pH 9 with 50 mM sodium dodecyl sulfate (SDS). The separation of azimilide and NE-10171, a key metabolite of azimilide, was difficult because their structures differ by only a single methyl group. The best separation was achieved under acidic pH conditions with cetyltriethyl ammonium chloride (CTAC) additive in the buffer. All of the CE separations were completed within a substantially shorter time and with better resolution than the corresponding high-performance liquid chromatography (HPLC) separations. Quantitation was done with azimilide and NE-10171. Calibration curves ranging from 10 to 1000 μg/ml were obtained with R² greater than 0.997 for both azimilide and NE-10171. The back-calculated concentrations of the calibration standards and the recoveries of the quality control (QC) samples were within the acceptance range currently used for HPLC methods. These results demonstrated the viability of CE as an alternative technique for drug metabolism studies in support of pharmaceutical development.     

Microdialysis Monitoring of Catecholamines and Excitatory Amino Acids in the Rat and Mouse Brain: Recent Developments Based on Capillary Electrophoresis with Laser-Induced Fluorescence Detection—A Mini-Review

1. Although microdialysis is a widely used approach for in vivo monitoring extracellular neurotransmitter concentrations, it has been previously limited in many cases by its poor temporal resolution. It is clear that when 10–30-min sampling is performed, short-lasting changes in extracellular neurotransmitter concentrations can be overlooked. Such a low sampling rate is necessary when combining microdialysis with the conventional analytical methods like high performance liquid chromatography.2. Since capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIFD) allows the detection of attomoles of neurotransmitters, the temporal resolution of microdialysis may be significantly improved: high sampling rates, in the range of 5 s to 1 min, have been already reported by our group and others using CE-LIFD for simultaneously analyzing catecholamines and amino acids in microdialysates.3. The power of combining microdialyis and CE-LIFD is shown, using examples of physiological and pharmacological studies dealing with the dynamics of in vivo efflux processes and/or interactions between neurotransmitters.     

Isoelectric focusing by free solution capillary electrophoresis.

A reproducible, quantitative isoelectric focusing method using capillary electrophoresis that exhibits high resolution and linearity over a wide pH gradient was developed. RNase T1 and RNase ba are two proteins that have isoelectric points (pI's) at the two extremes of a pH 3-10 gradient. Site-directed mutants of the former were separated from the wild-type form and pI's determined in the same experiment. The pI's of RNase T1 wild-type, its three mutants, and RNase ba were determined for the first time as 2.9, 3.1, 3.1, 3.3, and 9.0, respectively. The paper describes the protocol for isoelectric focusing by capillary electrophoresis, as well as presenting data describing the linearity, resolution, limits of mass loading, and reproducibility of the method.     

Recent advances in methods of direct optical resolution

Very great advances have been made in the field of direct optical resolution of organic compounds by chromatographic techniques. Chiral capillary gas chromatography now permits a determination of the enantiomeric composition of a few nanograms of a compound present in a mixture of many others. Coupled with high resolution mass spectrometry the technique will additionally permit structural elucidation; of great interest in pheromone research and related areas. Analytical separations of enantiomers are now also carried out by high-performance liquid chromatography (HPLC) methods based on a variety of principles. Basically, two main types are used, differing as to whether the mobile phase has to be a chiral medium or not. Two-dimensional HPLC, whereby compounds separated on a non-chiral column are progressively and automatically transferred to a chiral column for optical resolution, has been used successsfully for chiral amino acid separations. Many different chiral sorbents for preparative LC and HPLC resolutions have been prepared; some of these are now used in columns capable of producing pure enantiomers from a given racemate at a rate of the order of one gram/hour in continuous, automatic HPLC procedures. Apart from all important applications of these results of optical resolution technology, an increased knowledge of the underlying chiral recognition phenomena responsible for enantioselection has also been achieved.