Starch industry wastewater-based stable Bacillus thuringiensis liquid formulations

Liquid formulations were developed from Bacillus thuringiensis (Bt)-fermented broths of starch industry wastewater (SIW) and of soya medium. Stability studies were carried out for 1 yr. Storage stability was tested by studying various physical and chemical (e.g., viscosity, particle size, corrosion, and suspendibility) and biological (e.g., microbial contamination, viable spores, and entomotoxicity) parameters at different pH levels and temperatures. Three suspending agents, sorbitol, sodium monophosphate, and sodium metabisulfite, were added to fermented broth in different concentrations. Sorbitol and sodium monophosphate in the ratio 3:1 was the best suspending agent combination for both formulations. Starch industry wastewater fermentation yielded cell and viable spore counts 10- and 4-fold greater than those from soya medium, respectively, and a 1.7-fold increase in entomotoxicity. However, both formulations started deteriorating at pH 6 and 6.5 and 40 and 50 degrees C. There were no signs of corrosion and microbial contamination in both types of formulations.     

Ultrafiltration recovery of entomotoxicity from supernatant of Bacillus thuringiensis fermented wastewater and wastewater sludge

The study investigates the recovery of active components (crystal proteins, spores and other factors of virulence) of Bacillus thuringiensis (Bt) based biopesticides from centrifuged supernatant, by ultrafiltration. The centrifuged fermented broths comprised, starch industry wastewater, non-hydrolyzed and hydrolyzed wastewater sludge and semi-synthetic soya medium (as control). The ultrafiltration membrane of 5 kDa gave highest recovery of the active components and increased the entomotoxicity in the retentates by 7.9%, 10.5%, 9.0%, 5.7%, for semi-synthetic soya medium, starch industry wastewater, non-hydrolyzed and hydrolyzed wastewater sludge, respectively. However, the retention of suspended solids on the membrane (measured via mass balance) varied with the type of fermented broths and was very high for hydrolyzed sludge (soya-15%; starch industry wastewater-12%; non-hydrolyzed sludge-7% and hydrolyzed sludge-68%). This reflected the deposit on the membrane. In the given context, scale-up of the ultrafiltration process will give better efficacy for non-hydrolyzed sludge and starch industry wastewater in comparison to soya and hydrolyzed sludge medium.     

The Role of Formulation Additives in Increasing the Potency of Cydia pomonella Granulovirus for Codling Moth Larvae,in Laboratory and Field Experiments

Studies were undertaken to improve the biological efficacy of the granulovirus (CpGV) of the codling moth, Cydia pomonella , by evaluating the performance of some formulation additives that might improve virus persistence and/or virus uptake by first instar larvae. Laboratory studies, using a leaf disc bioassay, demonstrated that 15% cane molasses incorporated within a formulation of purified CpGV dramatically reduced the median lethal exposure time (LET 50 ) to CpGV for neonate larvae at a CpGV dosage rate of 10 7 occlusion bodies (OBs) ml -1 . Screening of a range of other compounds showed that sucrose, fructose and sorbitol (at 10% concentrations) and extracts of apple flesh and skin also gave significant reductions in the LET 50 of CpGV formulations containing these ingredients. Pectin, malic acid and &#102 -farnesene did not significantly reduce the LET 50 . In a field trial, molasses included at 15% (v/v) in a CpGV formulation, containing a dosage rate of 10 12 OBs ha -1 , gave as good control of codling moth damage as virus formulations containing the 'sticker' 0.2% skimmed milk at higher dosage rates of 10 13 and 10 14 OBs ha -1 . Studies of CpGV persistence on foliage revealed no significant improvement of virus persistence on apple foliage using 10% or 15% molasses formulations. A second field trial demonstrated that 10% molasses, 10% sorbitol or 0.08% &#102 -farnesene significantly reduced codling moth deep damage to fruit when these ingredients were added to formulations of pure CpGV. Substantial sooty-mould growth ( Cladosporium spp.) was observed on apple foliage treated with formulations containing molasses, indicating that this formulation additive has secondary consequences that would need to be taken into account if molasses was to be used in commercial CpGV formulations. Nonetheless, these studies clearly demonstrate that major biological improvements in CpGV performance can be achieved by the incorporation of formulation additives, including molasses and several other compounds, that probably function as attractants and/or feeding stimulants for codling moth larvae.     

Preservation of Oligodendroglial Cytoplasm in Cryopreservative-Pretreated Frozen White Matter

Abstract: Various cryoprotective agents [glycerol, dimethylsulphoxide, polyvinylpyrrolidone (PVP 40)], all dissolved in Krebs phosphate medium were tested for their effects on cytoplasmic preservation in oligodendroglia isolated from bovine white matter stored at -30°C. Of these agents, only PVP 40 (15% wt/vol) produced a significant improvement in recovery of oligodendroglial cytoplasm compared with untreated frozen brain. Cells isolated after PVP 40 pretreatment contained levels of membrane-bound enzymes similar to those found in cells isolated from fresh white matter. There was, however, some loss of soluble protein. Studies of galactocerebroside synthesis in neuronal and oligodendroglial perikarya have shown that the glial cells contain ceramide galactosyltransferase at much higher specific activity than the neurones.     

Once-daily sustained-release matrix tablets of nicorandil: Formulation and in vitro evaluation

The objective of the present study was to develop once-daily sustained-release matrix tablets of nicorandil, a novel potassium channel opener used in cardiovascular diseases. The tablets were prepared by the wet granulation method. Ethanolic solutions of ethylcellulose (EC), Eudragit RL-100, Eudragit RS-100, and polyvinylpyrrolidone were used as granulating agents along with hydrophilic matrix materials like hydroxypropyl methylcellulose (HPMC), sodium carboxymethylcellulose, and sodium alginate. The granules were evaluated for angle of repose, bulk density, compressibility index, total porosity, and drug content. The tablets were subjected to thickness, diameter, weight variation test, drug content, hardness, friability, and in vitro release studies. The granules showed satisfactory flow properties, compressibility, and drug content. All the tablet formulations showed acceptable pharmacotechnical properties and complied with in-house specifications for tested parameters. According to the theoretical release profile calculation, a oncedaily sustained-release formulation should release 5.92 mg of nicorandil in 1 hour, like conventional tablets, and 3.21 mg per hour up to 24 hours. The results of dissolution studies indicated that formulation F-I (drug-to-HPMC, 1∶4; ethanol as granulating agent) could extend the drug release up to 24 hours. In the further formulation development process, F-IX (drug-to-HPMC, 1∶4; EC 4% wt/vol as granulating agent), the most successful formulation of the study, exhibited satisfactory drug release in the initial hours, and the total release pattern was very close to the theoretical release profile. All the formulations (except F-IX) exhibited diffusion-dominated drug release. The mechanism of drug release from F-IX was diffusion coupled with erosion.     

Optimization of spray drying process for Bacillus thuringiensis fermented wastewater and wastewater sludge

Response surface methodology was used to optimize spray drying process for producing biopesticide powders of Bacillus thuringiensis by using fermented broth of starch industry wastewater and wastewater sludge. Analysis of variance was carried out using number of viable spores in the powder as dependent variable. The determination coefficients of models were 92 and 94% for fermented broth of starch industry wastewater and wastewater sludge, respectively. Under the optimal conditions of the operational parameters of spray drying, the numbers of viable spores were 2.2 × 10⁸ and 1.3 × 10⁸ CFU/mg in the dry powders for starch industry wastewater and wastewater sludge respectively, with a loss of viable spores of 18 and 13% when compared with their respective fermented broths. The entomotoxicity (measured by the bioassay method) of the powders obtained under optimal conditions showed a loss of 28 and 18% when compared with the fermented broth of starch industry wastewater and wastewater sludge, respectively. The optimized results of spray drying were used for field application calculations. The volume of fermented broth required to produce powder formulated product when compared with the volume required for liquid formulation product in order to treat 1 ha of balsam fir was less and offered several advantages.     

Rapidly dissolving repaglinide powders produced by the ultra-rapid freezing process

The objective of the study was to produce rapidly dissolving formulations of the poorly water-soluble drug repaglinide using an innovative new technology, ultra-rapid freezing (URF), and to investigate the influence of excipient type on repaglinide stability. Repaglinide compositions containing different types and levels of excipients and different drug potencies (50%–86%) were produced by the URF technology. Repaglinide/excipient solutions were frozen on a cryogenic substrate, collected, and lyophilized to form a dry powder. Surfactants, including sodium dodecyl sulfate, and alkalizing agents such as diethanolamine (DEA) and tromethamine (TRIS) were incorporated into the compositions. Forced degradation of repaglinide was conducted under stressed conditions (eg, elevated temperature, exposure to peroxide) to determine the stability of the drug in such environments. The solubility of repaglinide increased as a function of increasing pH; therefore, incorporation of an alkalizing agent into the URF formulations increased the drug's solubility. Drug instability resulted when the drug was exposed to pH values above 9.0. URF formulations containing alkalizing agents showed no degradation or spontaneous recrystallization in the formulation, indicating that increased stability was afforded by processing. URF processing created nanostructured drug/excipient particles with higher dissolution rates than were achieved for unprocessed drug. Alkalizing agents such as TRIS and DEA, present at levels of 25% to 33% wt/wt in the formulations, did not cause degradation of the drug when processed using URF. URF processing, therefore, yielded fast-dissolving formulations that were physically and chemically stable, resistant to alkali degradation or spontaneous recrystallization in the formulation. Published: July 20, 2007     

Effect of formulation factors on in vitro transcorneal permeation of gatifloxacin from aqueous drops

The purpose of this research was to optimize the formulation factors for maximum in vitro permeation of gatifloxacin from aqueous drops through excised goat cornea and to evaluate the permeation characteristics of drug from selected marketed eyedrop formulations. Permeation studies were conducted by putting 1 mL of formulation on the cornea (0.67 cm²) fixed between the donor and receptor compartments of an all-glass modified Franz diffusion cell and measuring gatifloxacin concentration in the receptor (containing normal saline under stirring) by spectrophotometry at 291.5 nm, after 120 minutes. Raising the drug concentration of the drops increased the drug permeation but decreased the percent permeation and the in vitro ocular availability. Raising the pH of the formulation from pH 5 to 7.2 increased both the drug permeation and the in vitro ocular availability. Eyedrops containing benzalkonium chloride (BAK; 0.01% wt/vol) and disodium edetate (EDTA; 0.01% wt/vol) showed maximum permeation, followed by Zymar, BAK (0.01% wt/vol), Gatilox, Gatiquin, and Gate (statistically significantP<.05 compared with control). In vitro titration of the formulations with 0.1N NaOH indicated the presence of a buffer in Zymar (pH 6) and Gate (pH 5.8), which may cause irritation and induce lacrimation, resulting in reduced ocular availability in vivo. Thus, formulation with BAK and EDTA, which is unbuffered, has a better likelihood of being absorbed in vivo. The BAK-EDTA formulation significantly (P<.05) increased the permeation of gatifloxacin through paired excised corneas of goat, sheep, and buffalo, compared with the control formulation. The goat cornea showed the greatest increase in permeation, followed by the sheep and buffalo corneas. Published: July 7, 2006     

Preparation and evaluation of chitosan/carrageenan beads for controlled release of sodium diclofenac

The polyelectrolyte complex (PEC) hydrogel beads based on chitosan (CS) and carrageenan (CR) have been studied as a controlled release device to deliver sodium diclofenac (DFNa) in the simulated gastrointestinal condition. Various factors potentially influencing the drug release (ie, CS/CR proportion, DFNa content, types and amount of cross-linking agents) were also investigated. The optimal formulation was obtained with CS/CR proportion of 2/1 and 5% (wt/vol) DFNa. The controlled release of the drug from this formulation was superior to other formulations and was able to maintain the release for approximately 8 hours. Upon cross-linking with glutaric acid and glutaraldehyde, the resulting beads were found to be more efficient for prolonged drug release than their non-cross-linking counterparts. The bead cross-linked with glutaraldehyde was able to control the release of the drug over 24 hours. The difference in the drug release behavior can be attributed to the differences in ionic interaction between the oppositely charged ions and to the concentrations of the drug within the beads, which depends on the compositions of the formulation and the pH of the dissolution medium. The release of drug was controlled by the mechanism of the dissolution of DFNa in the dissolution medium and the diffusion of DFNa through the hydrogel beads.     

Recombinant cells of Pseudomonas fluorescens: a highly palatable encapsulation for delivery of genetically engineered toxins to subterranean termites (Isoptera: Rhinotermitidae)

J. K. GRACE AND D. M. EWART. 1996. In the CellCa® process (Mycogen Corp., San Diego, CA), recombinant cells of the bacterium Pseudomonas fluorescens are induced to express the δ-endotoxin of Bacillus thuringiensis (Bt), then killed and fixed to encapsulate the δ-endotoxin. Two commercial agricultural formulations prepared by the CellCap® process were evaluated for palatability to the termite Coptotermes formosanus. The MVP® formulation, active against Lepidoptera, contained the Ps. fluoresens -encapsulated δ-endotoxin of Bt var. kurstaki. The M-Trak™ formulation, active against Coleoptera, contained the δ-endotoxin of Bt var. san diego. Papers treated with either formulation at concentrations as great as 1 g cm⁻³ were readily fed upon by C. formosanus. As expected, the two formulations tested were not significantly toxic to the termites, both having optimal activity at a pH range outside that of the termite gut. The palatability of the CellCap® formulations indicates that the host bacterium, Ps. fluorescens , is a suitable delivery system for genetically engineered termiticides.     

Effect of dilute acid pretreatment on the saccharification and fermentation of rye straw

This research shows the effect of dilute acid pretreatment with various sulfuric acid concentrations (0.5–2.0% [wt/vol]) on enzymatic saccharification and fermentation yield of rye straw. After pretreatment, solids of rye straw were suspended in Na citrate buffer or post-pretreatment liquids (prehydrolysates) containing sugars liberated after hemicellulose hydrolysis. Saccharification was conducted using enzymes dosage of 15 or 25 FPU/g cellulose. Cellulose saccharification rate after rye straw pretreatment was enhanced by performing enzymatic hydrolysis in sodium citrate buffer in comparison with hemicellulose prehydrolysate. The maximum cellulose saccharification rate (69%) was reached in sodium citrate buffer (biomass pretreated with 2.0% [wt/vol] H₂SO₄). Lignocellulosic complex of rye straw after pretreatment was subjected to separate hydrolysis and fermentation (SHF) or separate hydrolysis and co-fermentation (SHCF). The SHF processes conducted in the sodium citrate buffer using monoculture of Saccharomyces cerevisiae (Ethanol Red) were more efficient compared to hemicellulose prehydrolysate in respect with ethanol yields. Maximum fermentation efficiency of SHF processes obtained after rye straw pretreatment at 1.5% [wt/vol] H₂SO₄ and saccharification using enzymes dosage of 25 FPU/g in sodium citrate buffer, achieving 40.6% of theoretical yield. However, SHCF process using cocultures of pentose-fermenting yeast, after pretreatment of raw material at 1.5% [wt/vol] H₂SO₄ and hydrolysis using enzymes dosage of 25 FPU/g, resulted in the highest ethanol yield among studied methods, achieving 9.4 g/L of ethanol, corresponding to 55% of theoretical yield.     

Effect of reduced sulfur compounds on the fermentation of phosphoric acid pretreated sugarcane bagasse by ethanologenic Escherichia coli

The addition of reduced sulfur compounds (thiosulfate, cysteine, sodium hydrosulfite, and sodium metabisulfite) increased growth and fermentation of dilute acid hydrolysate of sugarcane bagasse by ethanologenic Escherichia coli (strains LY180, EMFR9, and MM160). With sodium metabisulfite (0.5 mM), toxicity was sufficiently reduced that slurries of pretreated biomass (10% dry weight including fiber and solubles) could be fermented by E. coli strain MM160 without solid-liquid separation or cleanup of sugars. A 6-h liquefaction step was added to improve mixing. Sodium metabisulfite also caused spectral changes at wavelengths corresponding to furfural and soluble products from lignin. Glucose and cellobiose were rapidly metabolized. Xylose utilization was improved by sodium metabisulfite but remained incomplete after 144 h. The overall ethanol yield for this liquefaction plus simultaneous saccharification and co-fermentation process was 0.20 g ethanol/g bagasse dry weight, 250 L/tonne (61 gal/US ton).     

Preparation of spray-dried wettable powder formulations of Bacillus thuringiensis-based biopesticides

Bacillus thuringiensis is the most widely used biopesticide among many methods available to control insects. To make a saleable product, B. thuringiensis must be substantially concentrated by removal of water and formulated to improve longevity, efficacy, and ease of transport of the product. B. thuringiensis subsp. aizawai culture broth as an active ingredient was mixed with various adjuvants and then spray dried. The optimum conditions for spray drying were found to be an outlet temperature of 60-85 degrees C and an inlet temperature of 120-180 degrees C. Various adjuvants had different effects on physical and biological properties of the dried product. Gelatinized tapioca starch and milk powder improved suspensibility but adversely affected wettability of the dried formulated product. Vegetable oil and Tween 20 enhanced wettability but resulted in poor suspensibility. Silica fume was used to enhance flowability because it reduced clumping and caking of the powder resulting from the addition of vegetable oil. Formulation containing 10% wt:wt B. thuringiensis, 10% wt:wt gelatinized tapioca starch, 10% wt:wt sucrose, 38% wt:wt tapioca starch, 20% wt:wt milk powder, 10% wt:wt silica fume, 2% wt:wt polyvinyl alcohol, 5% vol:vol Tween 20, 1% vol:vol refined rice bran oil, and 1% vol:vol antifoam solution was found to be optimum in terms of the physical and biological properties of the dried product. This formulation had 55% suspensibility, 24 s for wetting time, and 5.69 x 10(4) CFU/ml of LC50 value against Spodoptera exigua larvae.     

Studies on Bacillus thuringiensis H-14 strains isolated in egypt—IV. characterization of fermentation conditions for δ-endotoxin production

Fermentation media formulated from inexpensive locally available ingredients, namely soya meal, Proflo (a partially defatted cooked cottonseed fiour) and molasses, were assessed for growth, sporulation and -endotoxin production, by a mosquito-toxic strain of Bacillus thuringlensis H-14 locally isolated in Egypt, using an 8 I working volume fermenter. The insecticidal activity was assayed against Culex piplens. Good growth and sporulation were obtained with all the tested medium combinations, but a medium composed of 3% (w/v) soya meal and 1% (w/v) molasses was the best for -endotoxin production. The optimal batch cultivation conditions with respect to aeration (0.37 to 0.62 vol/vol min^–1), agitation (200 rev/min), pH (6.5 to 7.5), temperature (30°C) and initial concentration of carbon (1% w/v) and nitrogen (3% w/v) sources are also presented. This investigation shows that these locally available ingredients could be used for the production of low-priced mosquito larvicide in Egypt and other developing countries where these ingredients are avallable.     

The effect of high levels of molasses in combinations with hay on digestibility of organic matter,microbial protein synthesis and volatile fatty acid production in vitro

Fermentation in vitro of $\text{0}\text{100}$, $\text{10}\text{90}$, $\text{40}\text{60}$ and $\text{70}\text{30}$ cane molasses/hay mixtures in media containing urea, trace minerals and vitamins showed a progressive improvement of digestible organic matter in vitro (INVDOM) of hay as the level of molasses increased. Replacement of urea by soya bean meal induced a lower INVDOM of hay in the mixture with 70% molasses.Structural carbohydrates (hay) induced higher microbial synthesis per unit digestible organic matter (DOM) than simple sugars (molasses).The results observed emphasized the importance of adding urea to molasses for improved digestion of hay and a higher percentagge of propionic acid in the rumen. The effect of formulation of molasses/hay rations with soya bean meal or urea on the pattern of fermentation is discussed.     

Effect of Grewia Gum as a Suspending Agent on Ibuprofen Pediatric Formulation

The purpose of this work was to evaluate the potential of grewia gum (GG) as a suspending agent in pharmaceutical oral formulation using ibuprofen as model drug. Ibuprofen pediatric suspension (25 mg/5 mL) was formulated with grewia gum (0.5% w/v) as the suspending agent. Similar suspensions of Ibuprofen containing either sodium carboxymethylcellulose (Na-CMC) or hydroxymethylpropylcellulose (HPMC) were also produced. The suspensions were evaluated for ease of redispersion, sedimentation, rheological properties, and the effect of aging on the rheological properties at 25°C. The particle size and particle size distributions of the dispersed solute were determined. The redispersion time was 19, 11, and 0.5 min, respectively, for formulation containing Na-CMC, HPMC, and GG .The sedimentation volumes were 0.05, 0.05, and 0.125 mL, respectively, for Na-CMC, HPMC, and GG . Viscosities of suspensions at spindle speed of 25 rpm were of the order: GG > HPMC > Na-CMC when freshly prepared and of the order: HPMC > GG > Na-CMC within 6 months of storage. The particles size was 72.72, 73.82, 81.93, and 83.41 μm, respectively, for suspensions containing Na-CMC, ibuprofen alone, HPMC, and GG. Greatest hysteresis was observed in formulation containing HPMC. All the formulations were stable. It was our conclusion that the difference in the physicochemical properties of ibuprofen pediatric formulations was influenced more by the suspending agent used in the formulations than the drug. GG combined better redispersion with minimal changes in viscosity on storage compared to Na-CMC and HPMC as suspending agent. Thus GG may serve as a good suspending agent requiring no further aid in suspension redispersibility.KEY WORDS: grewia gum, oral pharmaceutical formulations, physicochemical properties, potential suspending agent     

Characterization of melanin produced by a wild-type strain of Bacillus cereus

Bacillus cereus 58 (Bc58) is a UV-resistant wild type strain that has an ability to produce a sorrel pigment induced by L-tyrosine. The Fourier-transform infrared (FT-IR) spectra and chemical tests of its pigment are similar to that of the standard melanin (Sigma). A bioassay shows that the LC₅₀ of a Bacillus thuringiensis (Bt) formulation added with the melanin of Bc58 and exposed to UV for 5 h is 16.1 μg/ml, which is similar to that of the Bt formulation without UV treatment, however, it is almost double that of the Bt formulation exposed to UV without the melanin of Bc58. The result of SDS-PAGE indicates that the melanin of Bc58 can protect the insecticidal crystal proteins from degradation. This suggests that it is an excellent UV protective agent for the insecticidal crystal proteins of the Bt formulation. Translated from Microbiology, 2006, 33(1): 42–45 [译自: 微生物学通报]     

Ethanol Production by Thermophilic Bacteria: Physiological Comparison of Solvent Effects on Parent and Alcohol-Tolerant Strains of Clostridium thermohydrosulfuricum

The effects of temperature, solvents, and cultural conditions on the fermentative physiology of an ethanol-tolerant (56 g/liter at 60°C) and parent strain of Clostridium thermohydrosulfuricum were compared. An ethanol-tolerant mutant was selected by successive transfer of the parent strain into media with progressively higher ethanol concentrations. Physiological differences noted in the mutant included enhanced growth, tolerance to various solvents, and alterations in the substrate range and the fermentation end product ratio. Ethanol tolerance was temperature dependent in the mutant but not in the parent strain. The mutant grew with ethanol concentrations up to 8.0% (wt/vol) at 45°C, but only up to 3.3% (wt/vol) at 68°C. Low ethanol concentration (0.2 to 1.6% [wt/vol]) progressively inhibited the parent strain to where glucose was not fermented at 2.0% (wt/vol) ethanol. Both strains grew and produced alcohols on glucose complex medium at 60°C in the presence of either 5% methanol or acetone, and these solvents when added at low concentration stimulated fermentative metabolism. The mutant produced ethanol at high concentrations and displayed an ethanol/glucose ratio (mole/mole) of 1.0 in media where initial ethanol concentrations were ≤4.0% (wt/vol), whereas when ethanol concentration was changed from 0.1% to 1.6% (wt/vol), the ethanol/glucose ratio for the parent strain changed from 1.6 to 0.6. These data indicate that C. thermohydrosulfuricum strains are tolerant of solvents and that low ethanol tolerance is not a result of disruption of membrane fluidity or glycolytic enzyme activity.     

原生质体紫外诱变选育可利用廉价碳源的高产油新菌株

【目的】研究并建立利用原生质体紫外诱变技术选育可利用廉价碳源发酵的高产油新菌株的方法。【方法】采用1.5%蜗牛酶和1.0%纤维素酶混合液水解去除细胞壁得到2A00015(近平滑假丝酵母,Candida parapsilosis)的原生质体,将其放于紫外灯下诱变及再生壁培养,筛选获得可利用廉价碳源发酵的高产油酵母,并采用气相色谱质谱联用法(GC-MS)测定其脂肪酸组成。【结果】突变效果最好的突变菌株2A00015/25用葡萄糖发酵培养7 d后,其生物量、油脂产率和产油量分别为17.77 g/L、58.12%和10.32 g/L,较原始菌株分别提高了12.45%、23.32%和38.68%;利用废糖蜜发酵培养,其生物量、油脂产率和产油量分别为18.54 g/L、49.44%和9.17 g/L,较原始菌株分别提高了9.09%、21.16%和32.18%。利用废糖蜜培养其产油效率虽低于利用葡萄糖培养,但从环境保护及原材料成本的角度考虑,用废糖蜜作为碳源发酵培养产生油脂更具优势。诱变菌株利用废糖蜜发酵后产生油脂经检测含有8种脂肪酸,其脂肪酸组成与植物油近似,其中不饱和脂肪酸含量占脂肪酸总量的82.4%。【结论】通过利用原生质体紫外诱变技术,成功选育出一株新的可利用廉价碳源的高产油海洋菌株,产油率达到49.4%,提高了21.2%。     

Development of a Bacillus sphaericus tablet formulation and its evaluation as a larvicide in the biological control of Culex quinquefasciatus

This study aimed to analyze the final fermentation culture of Bacillus sphaericus 2362, standardize it and develop an active tablet formulation for use in urban mosquito breeding sites. It was performed in three phases: analysis and standardization of a B. sphaericus fermented culture; physical, chemical, and biological analysis of the active powder (solubility, residual humidity, particle size, resting angle, flowing off time, compacted density, and biological activity against Culex quinquefasciatus larvae); and the development of fast-disintegrating tablets. Five formulations with differing compositions were developed and a UV protector was added to the selected formulation. The formulation products with or without UV protector, as well as the active powder caused 100% larval mortality from 1 day to 2 months after a single treatment under simulated field conditions. These results show that the UV protector does not affect the initial larvicide activity of B. sphaericus, nor its persistence over a period of two months.